| chip soc/intel/cannonlake |
| |
| register "SaGv" = "SaGv_FixedHigh" |
| |
| register "PcieClkSrcClkReq[0]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[1]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[2]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[3]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[4]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[5]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[6]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[7]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[8]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[9]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[10]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[11]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[12]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[13]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[14]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[15]" = "PCIE_CLK_NOTUSED" |
| |
| register "s0ix_enable" = "0" |
| |
| register "eist_enable" = "1" |
| |
| register "SerialIoDevMode" = "{ |
| [PchSerialIoIndexI2C0] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C1] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C2] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C3] = PchSerialIoDisabled, |
| [PchSerialIoIndexSPI0] = PchSerialIoDisabled, |
| [PchSerialIoIndexSPI1] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART0] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART1] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART2] = PchSerialIoDisabled, |
| }" |
| |
| register "DisableHeciRetry" = "1" |
| |
| device cpu_cluster 0 on end |
| |
| device domain 0 on |
| device pci 00.0 on end # Host Bridge |
| device pci 01.0 on # PCIE6 - x16 or x8 |
| register "PcieClkSrcUsage[3]" = "0x40" |
| smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "PCIE6" "SlotDataBusWidth16X" |
| end |
| device pci 01.1 on # PCIE4 - x8 |
| register "PcieClkSrcUsage[4]" = "0x41" |
| smbios_slot_desc "SlotTypePciExpressGen3X8" "SlotLengthOther" "PCIE4" "SlotDataBusWidth8X" |
| end |
| device pci 02.0 on end # Integrated Graphics Device |
| device pci 04.0 off end # SA Thermal Device |
| device pci 08.0 on end # Gaussian Mixture |
| device pci 12.0 on end # Thermal Subsystem |
| device pci 14.0 on # USB xHCI |
| register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # USB 3.1 front left |
| register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # USB 3.1 front right |
| register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # USB_1_2 header port A |
| register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # USB_1_2 header port B |
| register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # USB 3.1 rear top-right |
| register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # USB 3.1 rear bottom-right |
| register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # BMC port A |
| register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # USB 3.1 rear bottom-left |
| register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # BMC port B (seems to be unused) |
| register "usb2_ports[10]" = "USB2_PORT_MID(OC_SKIP)" # USB 3.1 rear top-left |
| |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 rear bottom-right |
| register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 rear top-right |
| register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 rear bottom-left |
| register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 rear top-left |
| register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 front left |
| register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 front right |
| |
| chip drivers/usb/acpi |
| device usb 0.0 on |
| chip drivers/usb/acpi |
| register "desc" = ""USB 2.0 Type-A Front Left"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(0, 0)" |
| device usb 2.0 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB 2.0 Type-A Front Right"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(0, 1)" |
| device usb 2.1 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB 2.0 USB_1_2 Header Port A"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| register "group" = "ACPI_PLD_GROUP(1, 0)" |
| device usb 2.2 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB 2.0 USB_1_2 Header Port B"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| register "group" = "ACPI_PLD_GROUP(1, 1)" |
| device usb 2.3 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB 2.0 Type-A Rear Right Upper"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(2, 0)" |
| device usb 2.4 on end |
| end |
| chip drivers/usb/acpi |
| device usb 2.5 off end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB 2.0 Type-A Rear Right Lower"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(2, 1)" |
| device usb 2.6 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB 2.0 BMC Port A"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| register "group" = "ACPI_PLD_GROUP(3, 0)" |
| device usb 2.7 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB 2.0 Type-A Rear Left Lower"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(2, 2)" |
| device usb 2.8 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB 2.0 BMC Port B"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| register "group" = "ACPI_PLD_GROUP(3, 1)" |
| device usb 2.9 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB 2.0 Type-A Rear Left Upper"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(2, 3)" |
| device usb 2.10 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB 3.1 Type-A Rear Right Lower"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(2, 1)" |
| device usb 3.0 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB 3.1 Type-A Rear Right Upper"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(2, 0)" |
| device usb 3.1 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB 3.1 Type-A Rear Left Lower"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(2, 2)" |
| device usb 3.2 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB 3.1 Type-A Rear Left Upper"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(2, 3)" |
| device usb 3.3 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB 3.1 Type-A Front Left"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(0, 0)" |
| device usb 3.4 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB 3.1 Type-A Front Right"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(0, 1)" |
| device usb 3.5 on end |
| end |
| end |
| end |
| end |
| device pci 14.1 off end # USB xDCI (OTG) |
| device pci 14.2 on end # RAM controller |
| device pci 14.3 off end |
| device pci 14.5 off end # SDCard |
| device pci 15.0 off end # I2C #0 |
| device pci 15.1 off end # I2C #1 |
| device pci 15.2 off end # I2C #2 |
| device pci 15.3 off end # I2C #3 |
| device pci 16.0 off end # Management Engine Interface 1 |
| device pci 16.1 off end # Management Engine Interface 2 |
| device pci 16.2 off end # Management Engine IDE Redirection |
| device pci 16.3 off end # Management Engine KT Redirection |
| device pci 16.4 off end # Management Engine Interface 3 |
| device pci 17.0 on |
| register "satapwroptimize" = "1" |
| |
| register "SataPortsEnable[0]" = "1" |
| register "SataPortsEnable[1]" = "1" |
| register "SataPortsEnable[2]" = "1" |
| register "SataPortsEnable[3]" = "1" |
| register "SataPortsEnable[4]" = "1" |
| register "SataPortsEnable[5]" = "1" |
| register "SataPortsEnable[6]" = "1" |
| register "SataPortsEnable[7]" = "1" |
| |
| register "SataPortsHotPlug[0]" = "1" |
| register "SataPortsHotPlug[1]" = "1" |
| register "SataPortsHotPlug[2]" = "1" |
| register "SataPortsHotPlug[3]" = "1" |
| register "SataPortsHotPlug[4]" = "1" |
| register "SataPortsHotPlug[5]" = "1" |
| register "SataPortsHotPlug[6]" = "1" |
| register "SataPortsHotPlug[7]" = "1" |
| end # SATA |
| device pci 1b.4 on # PCI Express Port 21 - PCIE5 |
| register "PcieRpSlotImplemented[20]" = "1" |
| register "PcieRpEnable[20]" = "1" |
| register "PcieRpLtrEnable[20]" = "1" |
| register "PcieClkSrcUsage[10]" = "20" |
| smbios_slot_desc "SlotTypePciExpressGen3X4" "SlotLengthOther" "PCIE5" "SlotDataBusWidth4X" |
| end |
| device pci 1c.0 on # PCI Express Port 1 - M2_1 |
| register "PcieRpSlotImplemented[0]" = "1" |
| register "PcieRpEnable[0]" = "1" |
| register "PcieRpLtrEnable[0]" = "1" |
| register "PcieClkSrcUsage[1]" = "0x80" |
| smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M2_1" "SlotDataBusWidth4X" |
| end |
| device pci 1d.0 on # PCI Express Port 9 - GbE #1 |
| register "PcieRpEnable[8]" = "1" |
| register "PcieRpLtrEnable[8]" = "1" |
| register "PcieClkSrcUsage[14]" = "8" |
| # Type indexes are needed for systemd to use "onboard" names by default |
| # (eno0, eno1). Otherwise it uses "slot" names that can change if any |
| # of the preceding PCIe slots are populated/unpopulated. Numbering 1/2 |
| # (rather than 0/1) is consistent with the mainboard manual and vendor |
| # firmware. |
| device pci 00.0 on |
| smbios_dev_info 1 |
| end |
| end |
| device pci 1d.1 on # PCI Express Port 10 - BMC video |
| register "PcieRpEnable[9]" = "1" |
| register "PcieRpLtrEnable[9]" = "1" |
| register "PcieClkSrcUsage[8]" = "9" |
| end |
| device pci 1d.2 on # PCI Express Port 11 - GbE #2 |
| register "PcieRpEnable[10]" = "1" |
| register "PcieRpLtrEnable[10]" = "1" |
| register "PcieClkSrcUsage[11]" = "10" |
| device pci 00.0 on |
| smbios_dev_info 2 |
| end |
| end |
| device pci 1e.0 off end # UART #0 |
| device pci 1e.1 off end # UART #1 |
| device pci 1e.2 off end # GSPI #0 |
| device pci 1e.3 off end # GSPI #1 |
| device pci 1f.0 on # LPC Interface |
| # This board has a lot of SuperIO LDNs with I/O BARs, the LPC generic |
| # I/O ranges must be configured manually. |
| register "gen1_dec" = "0x000c0ca1" # IPMI: ca0-caf |
| register "gen2_dec" = "0x007c0a01" # ASpeed SuperIO SWC and mailbox: a00-a7f |
| register "gen3_dec" = "0x00040291" # Nuvoton SuperIO HW monitor: 290-297 |
| |
| # AST2500 Super IO UART1 requires continuous mode |
| register "serirq_mode" = "SERIRQ_CONTINUOUS" |
| |
| chip drivers/ipmi # BMC KCS |
| device pnp ca2.0 on end |
| register "bmc_i2c_address" = "0x10" |
| end |
| # Nuvoton SuperIO |
| chip superio/common |
| # This board has two SuperIOs. The BMC's SuperIO is SIO0 |
| # since it is used for most normal SuperIO functionality. |
| register "acpi_name" = ""SIO1"" |
| device pnp 2e.0 on |
| chip superio/nuvoton/nct6791d |
| device pnp 2e.1 off end # Parallel port |
| device pnp 2e.2 off end # UART A |
| device pnp 2e.3 off end # UART B, IR |
| device pnp 2e.5 off end # Keyboard Controller |
| device pnp 2e.6 off end # Consumer IR |
| device pnp 2e.7 off end # GPIO 6 |
| device pnp 2e.107 off end # GPIO 7 |
| device pnp 2e.207 off end # GPIO 8 |
| device pnp 2e.8 off end # WDT |
| device pnp 2e.108 off end # GPIO0 |
| device pnp 2e.308 off end # GPIO base address mode |
| device pnp 2e.408 off end # WDT_MEM |
| device pnp 2e.708 alias nvt_superio_gpio1 on # GPIO1 |
| # Global Control Registers |
| # IRQ Polarity |
| irq 0x13 = 0xff |
| irq 0x14 = 0xff |
| # Multi Function Selection |
| irq 0x1a = 0x44 |
| irq 0x1b = 0x66 |
| irq 0x1c = 0x10 |
| irq 0x1d = 0x00 |
| irq 0x2a = 0xe0 |
| irq 0x2b = 0x00 |
| irq 0x2c = 0x00 |
| irq 0x2d = 0x00 |
| |
| # GPIO1 |
| irq 0xf0 = 0x08 |
| irq 0xf4 = 0xf7 |
| end |
| device pnp 2e.9 on # GPIO2 |
| irq 0xe0 = 0xbf |
| irq 0xe9 = 0xbf |
| end |
| device pnp 2e.109 on # GPIO3 |
| irq 0xe4 = 0x11 |
| irq 0xe5 = 0x01 |
| irq 0xe6 = 0x00 |
| irq 0xea = 0x6e |
| irq 0xfe = 0x00 |
| end |
| device pnp 2e.209 on # GPIO4 |
| irq 0xf0 = 0x44 |
| irq 0xee = 0xbb |
| end |
| device pnp 2e.309 off end # GPIO5 |
| device pnp 2e.a on # ACPI |
| # Bit 4 is "power-loss last state flag", in RTC well. |
| # 1=off (default), 0=on. |
| # This might be automatic power on for this board |
| irq 0xe6 = 0x0a |
| irq 0xed = 0x01 |
| end |
| device pnp 2e.b on # Hardware Monitor, Front Panel LED |
| io 0x60 = 0x0290 # HM IO base |
| io 0x62 = 0x0000 # SB-TSI IO base |
| irq 0x70 = 0x00 # HM IRQ |
| end |
| device pnp 2e.d off end # BCLK, WDT2, WDT_MEM |
| device pnp 2e.e off end # CIR Wake-up |
| device pnp 2e.f on end # GPIO push-pull / open-drain |
| device pnp 2e.14 on end # SVID, Port 80 UART |
| device pnp 2e.16 off end # DS5 |
| device pnp 2e.116 off end # DS3 |
| device pnp 2e.316 off end # PCHDSW |
| device pnp 2e.416 off end # DSWWOPT |
| device pnp 2e.516 on end # DS3OPT |
| device pnp 2e.616 off end # DSDSS |
| device pnp 2e.716 off end # DSPU |
| end |
| end |
| end |
| # AST2500 SuperIO |
| chip superio/common |
| device pnp 4e.0 on |
| chip superio/aspeed/ast2400 |
| device pnp 4e.2 on # SUART1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 0x04 |
| drq 0xf0 = 0x00 |
| end |
| device pnp 4e.3 off end # SUART2 |
| device pnp 4e.4 off # SWC |
| io 0x60 = 0xa00 |
| io 0x62 = 0xa10 |
| io 0x64 = 0xa20 |
| io 0x66 = 0xa30 |
| irq 0x70 = 0x09 |
| end |
| device pnp 4e.5 off end # KBC |
| device pnp 4e.7 off end # GPIO |
| device pnp 4e.b off end # SUART3 |
| device pnp 4e.c off end # SUART4 |
| device pnp 4e.d on # iLPC2AHB |
| irq 0x70 = 0x00 |
| end |
| device pnp 4e.e on # Mailbox |
| io 0x60 = 0xa40 |
| irq 0x70 = 0x00 |
| end |
| end |
| end |
| end |
| chip drivers/pc80/tpm |
| # The TPM header has SERIRQ#, but it is not |
| # connected on the TPM module - no TPM IRQ. |
| device pnp 0c31.0 on end |
| end |
| end |
| device pci 1f.1 off end # P2SB |
| device pci 1f.2 hidden end # PMC |
| device pci 1f.3 off end # Intel HDA |
| device pci 1f.4 on end # SMBus |
| device pci 1f.5 on end # SPI |
| end |
| end |