| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <acpi/acpi.h> |
| #include <acpi/acpigen.h> |
| #include <baseboard/variants.h> |
| #include <delay.h> |
| #include <device/pci_ops.h> |
| #include <gpio.h> |
| #include <timer.h> |
| #include <types.h> |
| |
| #define GPU_1V8_PWR_EN GPP_E18 |
| #define GPU_1V8_PG GPP_E20 |
| #define NV33_PWR_EN GPP_A21 |
| #define NV33_PG GPP_A22 |
| #define NVVDD_PWR_EN GPP_E0 |
| #define NVVDD_PG GPP_E16 |
| #define PEXVDD_PWR_EN GPP_E10 |
| #define PEXVDD_PG GPP_E17 |
| #define FBVDD_PWR_EN GPP_A19 |
| #define FBVDD_PG GPP_E4 |
| #define GPU_PERST_L GPP_B3 |
| #define GPU_ALLRAILS_PG GPP_E5 |
| |
| #define DEFAULT_PG_TIMEOUT_US 20000 |
| |
| #define VGAR_BYTE_OFFSET 5 |
| |
| /* Maximum size of PCI config space to save. */ |
| #define GPU_CONFIG_SAVE_SPACE_BYTES 0x100 |
| |
| static bool gpu_powered_on; |
| |
| struct power_rail_sequence { |
| const char *name; |
| |
| /* This is the GPIO (output) connected to the VR's enable pin. */ |
| gpio_t pwr_en_gpio; |
| bool pwr_en_active_low; |
| |
| /* This is the GPIO (input) connected to the VR's power-good pin. */ |
| gpio_t pg_gpio; |
| |
| /* Delay after sequencing this rail. */ |
| unsigned int delay_ms; |
| }; |
| |
| /* In GCOFF exit order (i.e., power-on order) */ |
| static const struct power_rail_sequence gpu_on_seq[] = { |
| { "GPU 1.8V", GPU_1V8_PWR_EN, false, GPU_1V8_PG, }, |
| { "NV3_3", NV33_PWR_EN, false, NV33_PG, }, |
| { "NVVDD+MSVDD", NVVDD_PWR_EN, false, NVVDD_PG, }, |
| { "PEXVDD", PEXVDD_PWR_EN, false, PEXVDD_PG, }, |
| { "FBVDD", FBVDD_PWR_EN, true, FBVDD_PG, }, |
| }; |
| |
| /* In GCOFF entry order (i.e., power-off order) */ |
| static const struct power_rail_sequence gpu_off_seq[] = { |
| { "FBVDD", FBVDD_PWR_EN, true, FBVDD_PG, 40,}, |
| { "PEXVDD", PEXVDD_PWR_EN, false, PEXVDD_PG, 10,}, |
| { "NVVDD+MSVDD", NVVDD_PWR_EN, false, NVVDD_PG, 2,}, |
| { "NV3_3", NV33_PWR_EN, false, NV33_PG, 4,}, |
| { "GPU 1.8V", GPU_1V8_PWR_EN, false, GPU_1V8_PG, 0,}, |
| }; |
| |
| enum rail_state { |
| RAIL_OFF = 0, |
| RAIL_ON = 1, |
| }; |
| |
| /* Assert the VR's enable pin, and wait until the VR's power-good is asserted. */ |
| static bool sequence_rail(const struct power_rail_sequence *seq, enum rail_state state) |
| { |
| enum rail_state pwr_en_state = state; |
| bool result; |
| |
| if (seq->pwr_en_active_low) |
| pwr_en_state = !pwr_en_state; |
| |
| gpio_output(seq->pwr_en_gpio, pwr_en_state); |
| result = wait_us(DEFAULT_PG_TIMEOUT_US, gpio_get(seq->pg_gpio) == state) >= 0; |
| if (seq->delay_ms) |
| mdelay(seq->delay_ms); |
| |
| return result; |
| } |
| |
| static void dgpu_power_sequence_off(void) |
| { |
| /* Assert reset and clear power-good */ |
| gpio_output(GPU_PERST_L, 0); |
| mdelay(5); |
| |
| /* Inform the GPU that the power is no longer good. */ |
| gpio_output(GPU_ALLRAILS_PG, 0); |
| |
| for (size_t i = 0; i < ARRAY_SIZE(gpu_off_seq); i++) { |
| if (!sequence_rail(&gpu_off_seq[i], RAIL_OFF)) { |
| printk(BIOS_ERR, "Failed to disable %s rail, continuing!\n", |
| gpu_off_seq[i].name); |
| } |
| } |
| } |
| |
| static void dgpu_power_sequence_on(void) |
| { |
| /* Assert PERST# */ |
| gpio_output(GPU_PERST_L, 0); |
| |
| for (size_t i = 0; i < ARRAY_SIZE(gpu_on_seq); i++) { |
| if (!sequence_rail(&gpu_on_seq[i], RAIL_ON)) { |
| printk(BIOS_ERR, "Failed to enable %s rail, sequencing back down!\n", |
| gpu_on_seq[i].name); |
| |
| /* If an error occurred, then perform the power-off sequence and |
| return early to avoid setting GPU_ALLRAILS_PG and PERST_L. */ |
| dgpu_power_sequence_off(); |
| return; |
| } |
| } |
| |
| /* Set power-good and release PERST# */ |
| gpio_output(GPU_ALLRAILS_PG, 1); |
| mdelay(1); |
| gpio_output(GPU_PERST_L, 1); |
| |
| printk(BIOS_INFO, "Sequenced GPU successfully\n"); |
| mdelay(1); |
| |
| gpu_powered_on = true; |
| } |
| |
| void variant_init(void) |
| { |
| /* Disable ASPM for the GPU until it is verified working. */ |
| struct device *dgpu = DEV_PTR(dgpu); |
| dgpu->disable_pcie_aspm = 1; |
| |
| if (acpi_is_wakeup_s3()) |
| return; |
| |
| dgpu_power_sequence_on(); |
| } |