| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| |
| #include <assert.h> |
| #include <string.h> |
| #include <cpu/x86/mp.h> |
| #include <cpu/intel/em64t101_save_state.h> |
| #include <cpu/intel/smm_reloc.h> |
| #include <console/console.h> |
| #include <smp/node.h> |
| #include <soc/msr.h> |
| #include <soc/smmrelocate.h> |
| |
| static void fill_in_relocation_params(struct smm_relocation_params *params) |
| { |
| uintptr_t tseg_base; |
| size_t tseg_size; |
| |
| smm_region(&tseg_base, &tseg_size); |
| |
| if (!IS_ALIGNED(tseg_base, tseg_size)) { |
| /* |
| * Note SMRR2 is supported which might support base/size combinations. |
| * For now it looks like FSP-M always uses aligned base/size, so let's |
| * not care about that. |
| */ |
| printk(BIOS_WARNING, |
| "TSEG base not aligned with TSEG SIZE! Not setting SMRR\n"); |
| return; |
| } |
| |
| /* SMRR has 32-bits of valid address aligned to 4KiB. */ |
| if (!IS_ALIGNED(tseg_size, 4 * KiB)) { |
| printk(BIOS_WARNING, |
| "TSEG size not aligned to the minimum 4KiB! Not setting SMRR\n"); |
| return; |
| } |
| |
| smm_subregion(SMM_SUBREGION_CHIPSET, ¶ms->ied_base, ¶ms->ied_size); |
| |
| params->smrr_base.lo = tseg_base | MTRR_TYPE_WRBACK; |
| params->smrr_base.hi = 0; |
| params->smrr_mask.lo = ~(tseg_size - 1) | MTRR_PHYS_MASK_VALID; |
| params->smrr_mask.hi = 0; |
| } |
| |
| static void setup_ied_area(struct smm_relocation_params *params) |
| { |
| char *ied_base; |
| |
| const struct ied_header ied = { |
| .signature = "INTEL RSVD", |
| .size = params->ied_size, |
| .reserved = {0}, |
| }; |
| |
| ied_base = (void *)params->ied_base; |
| |
| printk(BIOS_DEBUG, "IED base = 0x%08x\n", (u32)params->ied_base); |
| printk(BIOS_DEBUG, "IED size = 0x%08x\n", (u32)params->ied_size); |
| |
| /* Place IED header at IEDBASE. */ |
| memcpy(ied_base, &ied, sizeof(ied)); |
| |
| assert(params->ied_size > 1 * MiB + 32 * KiB); |
| |
| /* Zero out 32KiB at IEDBASE + 1MiB */ |
| memset(ied_base + 1 * MiB, 0, 32 * KiB); |
| } |
| |
| void get_smm_info(uintptr_t *perm_smbase, size_t *perm_smsize, |
| size_t *smm_save_state_size) |
| { |
| fill_in_relocation_params(&smm_reloc_params); |
| |
| smm_subregion(SMM_SUBREGION_HANDLER, perm_smbase, perm_smsize); |
| |
| if (smm_reloc_params.ied_size) |
| setup_ied_area(&smm_reloc_params); |
| |
| *smm_save_state_size = sizeof(em64t101_smm_state_save_area_t); |
| } |
| |
| static void update_save_state(int cpu, uintptr_t curr_smbase, |
| uintptr_t staggered_smbase, |
| struct smm_relocation_params *relo_params) |
| { |
| u32 smbase; |
| u32 iedbase; |
| int apic_id; |
| em64t101_smm_state_save_area_t *save_state; |
| /* |
| * The relocated handler runs with all CPUs concurrently. Therefore |
| * stagger the entry points adjusting SMBASE downwards by save state |
| * size * CPU num. |
| */ |
| smbase = staggered_smbase; |
| iedbase = relo_params->ied_base; |
| |
| apic_id = cpuid_ebx(1) >> 24; |
| printk(BIOS_DEBUG, "New SMBASE=0x%08x IEDBASE=0x%08x\n apic_id=0x%x\n", |
| smbase, iedbase, apic_id); |
| |
| save_state = (void *)(curr_smbase + SMM_DEFAULT_SIZE - sizeof(*save_state)); |
| |
| save_state->smbase = smbase; |
| save_state->iedbase = iedbase; |
| } |
| |
| /* |
| * The relocation work is actually performed in SMM context, but the code |
| * resides in the ramstage module. This occurs by trampolining from the default |
| * SMRAM entry point to here. |
| */ |
| void smm_relocation_handler(int cpu, uintptr_t curr_smbase, |
| uintptr_t staggered_smbase) |
| { |
| msr_t mtrr_cap; |
| struct smm_relocation_params *relo_params = &smm_reloc_params; |
| |
| printk(BIOS_DEBUG, "%s : CPU %d\n", __func__, cpu); |
| |
| /* Make appropriate changes to the save state map. */ |
| update_save_state(cpu, curr_smbase, staggered_smbase, relo_params); |
| |
| /* Write SMRR MSRs based on indicated support. */ |
| mtrr_cap = rdmsr(MTRR_CAP_MSR); |
| if (mtrr_cap.lo & SMRR_SUPPORTED) |
| write_smrr(relo_params); |
| } |
| |
| void smm_initialize(void) |
| { |
| /* Clear the SMM state in the southbridge. */ |
| smm_southbridge_clear_state(); |
| /* Run the relocation handler for on the BSP . */ |
| smm_initiate_relocation(); |
| } |
| |
| void smm_relocate(void) |
| { |
| /* Save states via MSR does not seem to be supported on CPX */ |
| if (!boot_cpu()) |
| smm_initiate_relocation(); |
| } |