| /***************************************************************************** |
| * |
| * Copyright (c) 2019, Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Advanced Micro Devices, Inc. nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| ***************************************************************************/ |
| |
| #ifndef _BL_SYSCALL_PUBLIC_H_ |
| #define _BL_SYSCALL_PUBLIC_H_ |
| |
| #include <stdint.h> |
| |
| #define SVC_EXIT 0x00 |
| #define SVC_MAP_USER_STACK 0x01 |
| #define SVC_DEBUG_PRINT 0x06 |
| #define SVC_RSAPSS_VERIFY 0x0D |
| #define SVC_DEBUG_PRINT_EX 0x1A |
| #define SVC_WAIT_10NS_MULTIPLE 0x1B |
| #define SVC_GET_BOOT_MODE 0x1C |
| #define SVC_DELAY_IN_MICRO_SECONDS 0x2F |
| #define SVC_GET_SPI_INFO 0x35 |
| #define SVC_MAP_FCH_IO_DEVICE 0x36 |
| #define SVC_UNMAP_FCH_IO_DEVICE 0x37 |
| #define SVC_MAP_SPIROM_DEVICE 0x38 |
| #define SVC_UNMAP_SPIROM_DEVICE 0x39 |
| #define SVC_UPDATE_PSP_BIOS_DIR 0x40 |
| #define SVC_COPY_DATA_FROM_UAPP 0x41 |
| #define SVC_READ_TIMER_VAL 0x42 |
| #define SVC_RESET_SYSTEM 0x43 |
| #define SVC_WRITE_POSTCODE 0x44 |
| #define SVC_GET_MAX_WORKBUF_SIZE 0x45 |
| #define SVC_SHA 0x46 |
| |
| typedef struct _RSAPSS_VERIFY_PARAMS_T |
| { |
| char *pHash; // Message digest to verify the RSA signature |
| unsigned int HashLen; // hash length in bytes |
| char *pModulus; // Modulus address |
| unsigned int ModulusSize; // Modulus length in bytes |
| char *pExponent; // Exponent address |
| unsigned int ExpSize; // Exponent length in bytes |
| char *pSig; // Signature to be verified, same size as ModulusSize |
| } RSAPSS_VERIFY_PARAMS; |
| |
| typedef enum _PSP_BOOT_MODE |
| { |
| PSP_BOOT_MODE_S0 = 0x0, |
| PSP_BOOT_MODE_S0i3_RESUME = 0x1, |
| PSP_BOOT_MODE_S3_RESUME = 0x2, |
| PSP_BOOT_MODE_S4 = 0x3, |
| PSP_BOOT_MODE_S5_COLD = 0x4, |
| PSP_BOOT_MODE_S5_WARM = 0x5, |
| } PSP_BOOT_MODE; |
| |
| typedef enum FCH_IO_DEVICE { |
| FCH_IO_DEVICE_SPI, |
| FCH_IO_DEVICE_I2C, |
| FCH_IO_DEVICE_GPIO, |
| FCH_IO_DEVICE_ESPI, |
| FCH_IO_DEVICE_IOMUX, |
| FCH_IO_DEVICE_MISC, |
| FCH_IO_DEVICE_AOAC, |
| FCH_IO_DEVICE_IOPORT, |
| |
| FCH_IO_DEVICE_END, |
| } FCH_IO_DEVICE; |
| |
| /* Svc_UpdatePspBiosDir can be used to GET or SET the PSP or BIOS directory |
| * offsets. This enum is used to specify whether it is a GET or SET operation. |
| */ |
| typedef enum DIR_OFFSET_OPERATION_E { |
| DIR_OFFSET_GET = 0x0, |
| DIR_OFFSET_SET, |
| DIR_OFFSET_OPERATION_MAX |
| } DIR_OFFSET_OPERATION; |
| |
| typedef enum FCH_I2C_CONTROLLER_ID_E |
| { |
| FCH_I2C_CONTROLLER_ID_2 = 2, |
| FCH_I2C_CONTROLLER_ID_3 = 3, |
| FCH_I2C_CONTROLLER_ID_4 = 4, |
| FCH_I2C_CONTROLLER_ID_MAX, |
| } FCH_I2C_CONTROLLER_ID; |
| |
| typedef enum UAPP_COPYBUF |
| { |
| UAPP_COPYBUF_CHROME_WORKBUF = 0x0, |
| UAPP_COPYBUF_MAX = 0x1, |
| } UAPP_COPYBUF; |
| |
| typedef struct SPIROM_INFO |
| { |
| void *SpiBiosSysHubBase; |
| void *SpiBiosSmnBase; |
| uint32_t SpiBiosSize; |
| } SPIROM_INFO; |
| |
| typedef enum PSP_TIMER_TYPE { |
| PSP_TIMER_TYPE_CHRONO = 0, |
| PSP_TIMER_TYPE_RTC = 1, |
| PSP_TIMER_TYPE_MAX = 2, |
| } PSP_TIMER_TYPE; |
| |
| typedef enum RESET_TYPE |
| { |
| RESET_TYPE_COLD = 0, |
| RESET_TYPE_WARM = 1, |
| RESET_TYPE_MAX = 2, |
| } RESET_TYPE; |
| |
| /* SHA types same as ccp SHA type in crypto.h */ |
| typedef enum SHA_TYPE |
| { |
| SHA_TYPE_256, |
| SHA_TYPE_512 |
| } SHA_TYPE; |
| |
| /* All SHA operation supported */ |
| typedef enum SHA_OPERATION_MODE |
| { |
| SHA_GENERIC |
| } SHA_OPERATION_MODE; |
| |
| /* SHA Supported Data Structures */ |
| typedef struct SHA_GENERIC_DATA_T |
| { |
| SHA_TYPE SHAType; |
| uint8_t *Data; |
| uint32_t DataLen; |
| uint32_t DataMemType; |
| uint8_t *Digest; |
| uint32_t DigestLen; |
| uint8_t *IntermediateDigest; |
| uint32_t IntermediateMsgLen; |
| uint32_t Init; |
| uint32_t Eom; |
| } SHA_GENERIC_DATA; |
| |
| /* |
| * Exit to the main Boot Loader. This does not return back to user application. |
| * |
| * Parameters: |
| * status - either Ok or error code defined by AGESA |
| */ |
| void svc_exit(uint32_t status); |
| |
| /* Maps buffer for stack usage. |
| * |
| * Parameters: |
| * start_addr - start address of the stack buffer |
| * end_addr - end of the stack buffer |
| * stack_va - [out] mapped stack Virtual Address |
| * |
| * Return value: BL_OK or error code |
| */ |
| uint32_t svc_map_user_stack(void *start_addr, |
| void *end_addr, void *stack_va); |
| |
| /* Print debug message into serial console. |
| * |
| * Parameters: |
| * string - null-terminated string |
| */ |
| void svc_debug_print(const char *string); |
| |
| /* Print 4 DWORD values in hex to serial console |
| * |
| * Parameters: |
| * dword0...dword3 - 32-bit DWORD to print |
| */ |
| void svc_debug_print_ex(uint32_t dword0, |
| uint32_t dword1, uint32_t dword2, uint32_t dword3); |
| |
| /* Waits in a blocking call for multiples of 10ns (100MHz timer) before returning |
| * |
| * Parameters: |
| * multiple - The number of multiples of 10ns to wait |
| * |
| * Return value: BL_OK, or BL_ERR_TIMER_PARAM_OVERFLOW |
| */ |
| uint32_t svc_wait_10ns_multiple(uint32_t multiple); |
| |
| /* Description - Returns the current boot mode from the type PSP_BOOT_MODE found in |
| * bl_public.h. |
| * |
| * Inputs - boot_mode - Output parameter passed in R0 |
| * |
| * Outputs - The boot mode in boot_mode. |
| * See Return Values. |
| * |
| * Return Values - BL_OK |
| * BL_ERR_NULL_PTR |
| * Other BL_ERRORs lofted up from called functions |
| */ |
| uint32_t svc_get_boot_mode(uint32_t *boot_mode); |
| |
| /* Add delay in micro seconds |
| * |
| * Parameters: |
| * delay - required delay value in microseconds |
| * |
| * Return value: NONE |
| */ |
| void svc_delay_in_usec(uint32_t delay); |
| |
| /* Get the SPI-ROM information |
| * |
| * Parameters: |
| * spi_rom_iInfo - SPI-ROM information |
| * |
| * Return value: BL_OK or error code |
| */ |
| uint32_t svc_get_spi_rom_info(SPIROM_INFO *spi_rom_info); |
| |
| /* Map the FCH IO device register space (SPI/I2C/GPIO/eSPI/etc...) |
| * |
| * Parameters: |
| * io_device - ID for respective FCH IO controller register space to be mapped |
| * arg1 - Based on IODevice ID, interpretation of this argument changes. |
| * arg2 - Based on IODevice ID, interpretation of this argument changes. |
| * io_device_axi_addr - AXI address for respective FCH IO device register space |
| * |
| * Return value: BL_OK or error code |
| */ |
| uint32_t svc_map_fch_dev(FCH_IO_DEVICE io_device, |
| uint32_t arg1, uint32_t arg2, void **io_device_axi_addr); |
| |
| /* Unmap the FCH IO device register space mapped earlier using Svc_MapFchIODevice() |
| * |
| * Parameters: |
| * io_device - ID for respective FCH IO controller register space to be unmapped |
| * io_device_addr - AXI address for respective FCH IO device register space |
| * |
| * Return value: BL_OK or error code |
| */ |
| uint32_t svc_unmap_fch_dev(FCH_IO_DEVICE io_device, |
| void *io_device_axi_addr); |
| |
| /* Map the SPIROM FLASH device address space |
| * |
| * Parameters: |
| * SpiRomAddr - Address in SPIROM tobe mapped (SMN based) |
| * size - Size to be mapped |
| * pSpiRomAddrAxi - Mapped address in AXI space |
| * |
| * Return value: BL_OK or error code |
| */ |
| uint32_t svc_map_spi_rom(void *spi_rom_addr, |
| uint32_t size, void **spi_rom_axi_addr); |
| |
| /* Unmap the SPIROM FLASH device address space mapped earlier using Svc_MapSpiRomDevice() |
| * |
| * Parameters: |
| * pSpiRomAddrAxi - Address in AXI address space previously mapped |
| * |
| * Return value: BL_OK or error code |
| */ |
| uint32_t svc_unmap_spi_rom(void *spi_rom_addr); |
| |
| /* Updates the offset at which PSP or BIOS Directory can be found in the |
| * SPI flash |
| * |
| * Parameters: |
| * psp_dir_offset - [in/out] Offset at which PSP Directory can be |
| * found in the SPI Flash. Same pointer is used |
| * to return the offset in case of GET operation |
| * bios_dir_offset - [in/out] Offset at which BIOS Directory can be |
| * found in the SPI Flash. Same pointer is used |
| * to return the offset in case of GET operation |
| * operation - [in] Specifies whether this call is used for |
| * getting or setting the offset. |
| * |
| * Return value: BL_OK or error code |
| */ |
| uint32_t svc_update_psp_bios_dir(uint32_t *psp_dir_offset, |
| uint32_t *bios_dir_offset, DIR_OFFSET_OPERATION operation); |
| |
| /* Copies the data that is shared by verstage to the PSP BL owned memory |
| * |
| * Parameters: |
| * type - enum |
| * address - Address in UAPP controlled/owned memory |
| * size - Total size of memory to copy (max 16Kbytes) |
| */ |
| uint32_t svc_save_uapp_data(UAPP_COPYBUF type, void *address, |
| uint32_t size); |
| |
| /* |
| * Read timer raw (currently CHRONO and RTC) value |
| * |
| * Parameters: |
| * Type - Type of timer UAPP would like to read from |
| * (currently CHRONO and RTC) |
| * counter_value - [out] return the raw counter value read from |
| * RTC or CHRONO_LO/HI counter register |
| */ |
| uint32_t svc_read_timer_val( PSP_TIMER_TYPE type, uint64_t *counter_value ); |
| |
| /* |
| * Reset the system |
| * |
| * Parameters: |
| * reset_type - Cold or Warm reset |
| */ |
| uint32_t svc_reset_system(RESET_TYPE reset_type); |
| |
| /* |
| * Write postcode to Port-80 |
| * |
| * Parameters: |
| * postcode - Postcode value to be written on port-80h |
| */ |
| uint32_t svc_write_postcode(uint32_t postcode); |
| |
| /* |
| * Get the max size of workbuf memory supported by PSP BL |
| * |
| * Parameters: |
| * size - [out] Max size supported by PSP BL for workbuf copy |
| */ |
| uint32_t svc_get_max_workbuf_size(uint32_t *size); |
| |
| /* |
| * Generic SHA call for SHA, SHA_OTP, SHA_HMAC |
| */ |
| uint32_t svc_crypto_sha(SHA_GENERIC_DATA *sha_op, SHA_OPERATION_MODE sha_mode); |
| |
| /* RSA PSS Verification of signature and data |
| * |
| * Parameters: |
| * RSAPSS_VERIFY_PARAMS - Pointer to RSA PSS parameters |
| * |
| * Return value: BL_OK or error code |
| */ |
| uint32_t svc_rsa_pss_verify(const RSAPSS_VERIFY_PARAMS *params); |
| |
| /* C entry point for the Bootloader Userspace Application */ |
| void Main(void); |
| |
| #endif /* _BL_SYSCALL__PUBLIC_H_ */ |