| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2013 Google, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <arch/stages.h> |
| #include <assert.h> |
| #include <stdint.h> |
| #include <stddef.h> |
| #include <string.h> |
| #include <cbfs.h> |
| #include <cbmem.h> |
| #include <console/console.h> |
| #include <console/vtxprintf.h> |
| #include <stdlib.h> |
| #include <timestamp.h> |
| #define NEED_VB20_INTERNALS /* TODO: remove me! */ |
| #include <vb2_api.h> |
| #include <vboot_struct.h> |
| #include "../chromeos.h" |
| #include "../fmap.h" |
| #include "../vboot_handoff.h" |
| #include "misc.h" |
| |
| /** |
| * Sets vboot_handoff based on the information in vb2_shared_data |
| * |
| * TODO: Add VBSD_BOOT_FIRMWARE_SW_WP_ENABLED logic |
| */ |
| static void fill_vboot_handoff(struct vboot_handoff *vboot_handoff, |
| struct vb2_shared_data *vb2_sd) |
| { |
| VbSharedDataHeader *vb_sd = |
| (VbSharedDataHeader *)vboot_handoff->shared_data; |
| uint32_t *oflags = &vboot_handoff->init_params.out_flags; |
| |
| vb_sd->flags |= VBSD_BOOT_FIRMWARE_VBOOT2; |
| |
| vboot_handoff->selected_firmware = vb2_sd->fw_slot; |
| |
| vb_sd->firmware_index = vb2_sd->fw_slot; |
| |
| vb_sd->magic = VB_SHARED_DATA_MAGIC; |
| vb_sd->struct_version = VB_SHARED_DATA_VERSION; |
| vb_sd->struct_size = sizeof(VbSharedDataHeader); |
| vb_sd->data_size = VB_SHARED_DATA_MIN_SIZE; |
| vb_sd->data_used = sizeof(VbSharedDataHeader); |
| vb_sd->fw_version_tpm = vb2_sd->fw_version_secdata; |
| |
| if (get_write_protect_state()) |
| vb_sd->flags |= VBSD_BOOT_FIRMWARE_WP_ENABLED; |
| |
| if (vb2_sd->recovery_reason) { |
| vb_sd->firmware_index = 0xFF; |
| if (vb2_sd->recovery_reason == VB2_RECOVERY_RO_MANUAL) |
| vb_sd->flags |= VBSD_BOOT_REC_SWITCH_ON; |
| *oflags |= VB_INIT_OUT_ENABLE_RECOVERY; |
| *oflags |= VB_INIT_OUT_CLEAR_RAM; |
| *oflags |= VB_INIT_OUT_ENABLE_DISPLAY; |
| *oflags |= VB_INIT_OUT_ENABLE_USB_STORAGE; |
| } |
| if (vb2_sd->flags & VB2_SD_DEV_MODE_ENABLED) { |
| *oflags |= VB_INIT_OUT_ENABLE_DEVELOPER; |
| *oflags |= VB_INIT_OUT_CLEAR_RAM; |
| *oflags |= VB_INIT_OUT_ENABLE_DISPLAY; |
| *oflags |= VB_INIT_OUT_ENABLE_USB_STORAGE; |
| vb_sd->flags |= VBSD_BOOT_DEV_SWITCH_ON; |
| vb_sd->flags |= VBSD_LF_DEV_SWITCH_ON; |
| } |
| /* TODO: Set these in depthcharge */ |
| if (CONFIG_VIRTUAL_DEV_SWITCH) |
| vb_sd->flags |= VBSD_HONOR_VIRT_DEV_SWITCH; |
| if (CONFIG_EC_SOFTWARE_SYNC) |
| vb_sd->flags |= VBSD_EC_SOFTWARE_SYNC; |
| if (!CONFIG_PHYSICAL_REC_SWITCH) |
| vb_sd->flags |= VBSD_BOOT_REC_SWITCH_VIRTUAL; |
| |
| /* In vboot1, VBSD_FWB_TRIED is |
| * set only if B is booted as explicitly requested. Therefore, if B is |
| * booted because A was found bad, the flag should not be set. It's |
| * better not to touch it if we can only ambiguously control it. */ |
| /* if (vb2_sd->fw_slot) |
| vb_sd->flags |= VBSD_FWB_TRIED; */ |
| |
| /* copy kernel subkey if it's found */ |
| if (vb2_sd->workbuf_preamble_size) { |
| struct vb2_fw_preamble *fp; |
| uintptr_t dst, src; |
| printk(BIOS_INFO, "Copying FW preamble\n"); |
| fp = (struct vb2_fw_preamble *)((uintptr_t)vb2_sd + |
| vb2_sd->workbuf_preamble_offset); |
| src = (uintptr_t)&fp->kernel_subkey + |
| fp->kernel_subkey.key_offset; |
| dst = (uintptr_t)vb_sd + sizeof(VbSharedDataHeader); |
| assert(dst + fp->kernel_subkey.key_size <= |
| (uintptr_t)vboot_handoff + sizeof(*vboot_handoff)); |
| memcpy((void *)dst, (void *)src, |
| fp->kernel_subkey.key_size); |
| vb_sd->data_used += fp->kernel_subkey.key_size; |
| vb_sd->kernel_subkey.key_offset = |
| dst - (uintptr_t)&vb_sd->kernel_subkey; |
| vb_sd->kernel_subkey.key_size = fp->kernel_subkey.key_size; |
| vb_sd->kernel_subkey.algorithm = fp->kernel_subkey.algorithm; |
| vb_sd->kernel_subkey.key_version = |
| fp->kernel_subkey.key_version; |
| } |
| |
| vb_sd->recovery_reason = vb2_sd->recovery_reason; |
| } |
| |
| void vboot_fill_handoff(void) |
| { |
| int i; |
| struct vboot_handoff *vh; |
| struct vb2_shared_data *sd; |
| struct vboot_region fw_main; |
| struct vboot_components *fw_info; |
| struct vb2_working_data *wd = vboot_get_working_data(); |
| |
| sd = vboot_get_work_buffer(wd); |
| sd->workbuf_hash_offset = 0; |
| sd->workbuf_hash_size = 0; |
| |
| printk(BIOS_INFO, "creating vboot_handoff structure\n"); |
| vh = cbmem_add(CBMEM_ID_VBOOT_HANDOFF, sizeof(*vh)); |
| if (vh == NULL) |
| /* we don't need to failover gracefully here because this |
| * shouldn't happen with the image that has passed QA. */ |
| die("failed to allocate vboot_handoff structure\n"); |
| |
| memset(vh, 0, sizeof(*vh)); |
| |
| /* needed until we finish transtion to vboot2 for kernel verification */ |
| fill_vboot_handoff(vh, sd); |
| |
| vb2_get_selected_region(wd, &fw_main); |
| fw_info = vboot_locate_components(&fw_main); |
| if (fw_info == NULL) |
| die("failed to locate firmware components\n"); |
| |
| /* these offset & size are used to load a rw boot loader */ |
| for (i = 0; i < fw_info->num_components; i++) { |
| vh->components[i].address = |
| fw_main.offset_addr + fw_info->entries[i].offset; |
| vh->components[i].size = fw_info->entries[i].size; |
| } |
| } |