| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2007-2008 Uwe Hermann <uwe@hermann-uwe.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <spd.h> |
| #include <sdram_mode.h> |
| #include <delay.h> |
| #include <stdlib.h> |
| #include "i440bx.h" |
| |
| /*----------------------------------------------------------------------------- |
| Macros and definitions. |
| -----------------------------------------------------------------------------*/ |
| |
| /* Uncomment this to enable debugging output. */ |
| #define DEBUG_RAM_SETUP 1 |
| |
| /* Debugging macros. */ |
| #if defined(DEBUG_RAM_SETUP) |
| #define PRINT_DEBUG(x) print_debug(x) |
| #define PRINT_DEBUG_HEX8(x) print_debug_hex8(x) |
| #define PRINT_DEBUG_HEX16(x) print_debug_hex16(x) |
| #define PRINT_DEBUG_HEX32(x) print_debug_hex32(x) |
| #define DUMPNORTH() dump_pci_device(PCI_DEV(0, 0, 0)) |
| #else |
| #define PRINT_DEBUG(x) |
| #define PRINT_DEBUG_HEX8(x) |
| #define PRINT_DEBUG_HEX16(x) |
| #define PRINT_DEBUG_HEX32(x) |
| #define DUMPNORTH() |
| #endif |
| |
| #define NB PCI_DEV(0, 0, 0) |
| |
| /* SDRAMC[7:5] - SDRAM Mode Select (SMS). */ |
| #define RAM_COMMAND_NORMAL 0x0 |
| #define RAM_COMMAND_NOP 0x1 |
| #define RAM_COMMAND_PRECHARGE 0x2 |
| #define RAM_COMMAND_MRS 0x3 |
| #define RAM_COMMAND_CBR 0x4 |
| |
| /* Map the JEDEC SPD refresh rates (array index) to 440BX refresh rates as |
| * defined in DRAMC[2:0]. |
| * |
| * [0] == Normal 15.625 us -> 15.6 us |
| * [1] == Reduced(.25X) 3.9 us -> 7.8 ns |
| * [2] == Reduced(.5X) 7.8 us -> 7.8 us |
| * [3] == Extended(2x) 31.3 us -> 31.2 us |
| * [4] == Extended(4x) 62.5 us -> 62.4 us |
| * [5] == Extended(8x) 125 us -> 124.8 us |
| */ |
| static const uint32_t refresh_rate_map[] = { |
| 1, 5, 5, 2, 3, 4 |
| }; |
| |
| /* Table format: register, bitmask, value. */ |
| static const long register_values[] = { |
| /* NBXCFG - NBX Configuration Register |
| * 0x50 - 0x53 |
| * |
| * [31:24] SDRAM Row Without ECC |
| * 0 = ECC components are populated in this row |
| * 1 = ECC components are not populated in this row |
| * [23:19] Reserved |
| * [18:18] Host Bus Fast Data Ready Enable (HBFDRE) |
| * Assertion of DRAM data on host bus occurs... |
| * 0 = ...one clock after sampling snoop results (default) |
| * 1 = ...on the same clock the snoop result is being sampled |
| * (this mode is faster by one clock cycle) |
| * [17:17] ECC - EDO static Drive mode |
| * 0 = Normal mode (default) |
| * 1 = ECC signals are always driven |
| * [16:16] IDSEL_REDIRECT |
| * 0 = IDSEL1 is allocated to this bridge (default) |
| * 1 = IDSEL7 is allocated to this bridge |
| * [15:15] WSC# Handshake Disable |
| * 1 = Uni-processor mode |
| * 0 = Dual-processor mode with external IOAPIC (default) |
| * [14:14] Intel Reserved |
| * [13:12] Host/DRAM Frequency |
| * 00 = 100 MHz |
| * 01 = Reserved |
| * 10 = 66 MHz |
| * 11 = Reserved |
| * [11:11] AGP to PCI Access Enable |
| * 1 = Enable |
| * 0 = Disable |
| * [10:10] PCI Agent to Aperture Access Disable |
| * 1 = Disable |
| * 0 = Enable (default) |
| * [09:09] Aperture Access Global Enable |
| * 1 = Enable |
| * 0 = Disable |
| * [08:07] DRAM Data Integrity Mode (DDIM) |
| * 00 = Non-ECC |
| * 01 = EC-only |
| * 10 = ECC Mode |
| * 11 = ECC Mode with hardware scrubbing enabled |
| * [06:06] ECC Diagnostic Mode Enable (EDME) |
| * 1 = Enable |
| * 0 = Normal operation mode (default) |
| * [05:05] MDA Present (MDAP) |
| * Works in conjunction with the VGA_EN bit. |
| * VGA_EN MDAP |
| * 0 x All VGA cycles are sent to PCI |
| * 1 0 All VGA cycles are sent to AGP |
| * 1 1 All VGA cycles are sent to AGP, except for |
| * cycles in the MDA range. |
| * [04:04] Reserved |
| * [03:03] USWC Write Post During I/O Bridge Access Enable (UWPIO) |
| * 1 = Enable |
| * 0 = Disable |
| * [02:02] In-Order Queue Depth (IOQD) |
| * 1 = In-order queue = maximum |
| * 0 = A7# is sampled asserted (i.e., 0) |
| * [01:00] Reserved |
| */ |
| // TODO |
| NBXCFG + 0, 0x00, 0x0c, |
| // NBXCFG + 1, 0x00, 0xa0, |
| NBXCFG + 1, 0x00, 0x80, |
| NBXCFG + 2, 0x00, 0x00, |
| NBXCFG + 3, 0x00, 0xff, |
| |
| /* DRAMC - DRAM Control Register |
| * 0x57 |
| * |
| * [7:6] Reserved |
| * [5:5] Module Mode Configuration (MMCONFIG) |
| * TODO |
| * [4:3] DRAM Type (DT) |
| * 00 = EDO |
| * 01 = SDRAM |
| * 10 = Registered SDRAM |
| * 11 = Reserved |
| * Note: EDO, SDRAM and Registered SDRAM cannot be mixed. |
| * [2:0] DRAM Refresh Rate (DRR) |
| * 000 = Refresh disabled |
| * 001 = 15.6 us |
| * 010 = 31.2 us |
| * 011 = 62.4 us |
| * 100 = 124.8 us |
| * 101 = 249.6 us |
| * 110 = Reserved |
| * 111 = Reserved |
| */ |
| /* Choose SDRAM (not registered), and disable refresh for now. */ |
| DRAMC, 0x00, 0x08, |
| |
| /* |
| * PAM[6:0] - Programmable Attribute Map Registers |
| * 0x59 - 0x5f |
| * |
| * 0x59 [3:0] Reserved |
| * 0x59 [5:4] 0xF0000 - 0xFFFFF BIOS area |
| * 0x5a [1:0] 0xC0000 - 0xC3FFF ISA add-on BIOS |
| * 0x5a [5:4] 0xC4000 - 0xC7FFF ISA add-on BIOS |
| * 0x5b [1:0] 0xC8000 - 0xCBFFF ISA add-on BIOS |
| * 0x5b [5:4] 0xCC000 - 0xCFFFF ISA add-on BIOS |
| * 0x5c [1:0] 0xD0000 - 0xD3FFF ISA add-on BIOS |
| * 0x5c [5:4] 0xD4000 - 0xD7FFF ISA add-on BIOS |
| * 0x5d [1:0] 0xD8000 - 0xDBFFF ISA add-on BIOS |
| * 0x5d [5:4] 0xDC000 - 0xDFFFF ISA add-on BIOS |
| * 0x5e [1:0] 0xE0000 - 0xE3FFF BIOS entension |
| * 0x5e [5:4] 0xE4000 - 0xE7FFF BIOS entension |
| * 0x5f [1:0] 0xE8000 - 0xEBFFF BIOS entension |
| * 0x5f [5:4] 0xEC000 - 0xEFFFF BIOS entension |
| * |
| * Bit assignment: |
| * 00 = DRAM Disabled (all access goes to memory mapped I/O space) |
| * 01 = Read Only (Reads to DRAM, writes to memory mapped I/O space) |
| * 10 = Write Only (Writes to DRAM, reads to memory mapped I/O space) |
| * 11 = Read/Write (all access goes to DRAM) |
| */ |
| // TODO |
| PAM0, 0x00, 0x00, |
| PAM1, 0x00, 0x00, |
| PAM2, 0x00, 0x00, |
| PAM3, 0x00, 0x00, |
| PAM4, 0x00, 0x00, |
| PAM5, 0x00, 0x00, |
| PAM6, 0x00, 0x00, |
| |
| /* DRB[0:7] - DRAM Row Boundary Registers |
| * 0x60 - 0x67 |
| * |
| * An array of 8 byte registers, which hold the ending memory address |
| * assigned to each pair of DIMMs, in 8MB granularity. |
| * |
| * 0x60 DRB0 = Total memory in row0 (in 8 MB) |
| * 0x61 DRB1 = Total memory in row0+1 (in 8 MB) |
| * 0x62 DRB2 = Total memory in row0+1+2 (in 8 MB) |
| * 0x63 DRB3 = Total memory in row0+1+2+3 (in 8 MB) |
| * 0x64 DRB4 = Total memory in row0+1+2+3+4 (in 8 MB) |
| * 0x65 DRB5 = Total memory in row0+1+2+3+4+5 (in 8 MB) |
| * 0x66 DRB6 = Total memory in row0+1+2+3+4+5+6 (in 8 MB) |
| * 0x67 DRB7 = Total memory in row0+1+2+3+4+5+6+7 (in 8 MB) |
| */ |
| /* Set the DRBs to zero for now, this will be fixed later. */ |
| DRB0, 0x00, 0x00, |
| DRB1, 0x00, 0x00, |
| DRB2, 0x00, 0x00, |
| DRB3, 0x00, 0x00, |
| DRB4, 0x00, 0x00, |
| DRB5, 0x00, 0x00, |
| DRB6, 0x00, 0x00, |
| DRB7, 0x00, 0x00, |
| |
| /* FDHC - Fixed DRAM Hole Control Register |
| * 0x68 |
| * |
| * Controls two fixed DRAM holes: 512 KB - 640 KB and 15 MB - 16 MB. |
| * |
| * [7:6] Hole Enable (HEN) |
| * 00 = None |
| * 01 = 512 KB - 640 KB (128 KB) |
| * 10 = 15 MB - 16 MB (1 MB) |
| * 11 = Reserved |
| * [5:0] Reserved |
| */ |
| /* No memory holes. */ |
| FDHC, 0x00, 0x00, |
| |
| /* RPS - SDRAM Row Page Size Register |
| * 0x74 - 0x75 |
| * |
| * Sets the row page size for SDRAM. For EDO memory, the page |
| * size is fixed at 2 KB. |
| * |
| * [15:0] Page Size (PS) |
| * TODO |
| */ |
| // TODO |
| RPS + 0, 0x00, 0x00, |
| RPS + 1, 0x00, 0x00, |
| |
| /* SDRAMC - SDRAM Control Register |
| * 0x76 - 0x77 |
| * |
| * [15:10] Reserved |
| * [09:08] Idle/Pipeline DRAM Leadoff Timing (IPDLT) |
| * 00 = Illegal |
| * 01 = Add a clock delay to the lead-off clock count |
| * 10 = Illegal |
| * 11 = Illegal |
| * [07:05] SDRAM Mode Select (SMS) |
| * 000 = Normal SDRAM Operation (default) |
| * 001 = NOP Command Enable |
| * 010 = All Banks Precharge Enable |
| * 011 = Mode Register Set Enable |
| * 100 = CBR Enable |
| * 101 = Reserved |
| * 110 = Reserved |
| * 111 = Reserved |
| * [04:04] SDRAMPWR |
| * 0 = 3 DIMM configuration |
| * 1 = 4 DIMM configuration |
| * [03:03] Leadoff Command Timing (LCT) |
| * 0 = 4 CS# Clock |
| * 1 = 3 CS# Clock |
| * [02:02] CAS# Latency (CL) |
| * 0 = 3 DCLK CAS# latency |
| * 1 = 2 DCLK CAS# latency |
| * [01:01] SDRAM RAS# to CAS# Delay (SRCD) |
| * 0 = 3 clocks between a row activate and a read or write cmd. |
| * 1 = 2 clocks between a row activate and a read or write cmd. |
| * [00:00] SDRAM RAS# Precharge (SRP) |
| * 0 = 3 clocks of RAS# precharge |
| * 1 = 2 clocks of RAS# precharge |
| */ |
| SDRAMC + 0, 0x00, 0x00, |
| SDRAMC + 1, 0x00, 0x00, |
| |
| /* PGPOL - Paging Policy Register |
| * 0x78 - 0x79 |
| * |
| * [15:08] Banks per Row (BPR) |
| * TODO |
| * 0 = 2 banks |
| * 1 = 4 banks |
| * [07:05] Reserved |
| * [04:04] Intel Reserved |
| * [03:00] DRAM Idle Timer (DIT) |
| * 0000 = 0 clocks |
| * 0001 = 2 clocks |
| * 0010 = 4 clocks |
| * 0011 = 8 clocks |
| * 0100 = 10 clocks |
| * 0101 = 12 clocks |
| * 0110 = 16 clocks |
| * 0111 = 32 clocks |
| * 1xxx = Infinite (pages are not closed for idle condition) |
| */ |
| // TODO |
| PGPOL + 0, 0x00, 0x00, |
| PGPOL + 1, 0x00, 0xff, |
| |
| /* PMCR - Power Management Control Register |
| * 0x7a |
| * |
| * [07:07] Power Down SDRAM Enable (PDSE) |
| * 1 = Enable |
| * 0 = Disable |
| * [06:06] ACPI Control Register Enable (SCRE) |
| * 1 = Enable |
| * 0 = Disable (default) |
| * [05:05] Suspend Refresh Type (SRT) |
| * 1 = Self refresh mode |
| * 0 = CBR fresh mode |
| * [04:04] Normal Refresh Enable (NREF_EN) |
| * 1 = Enable |
| * 0 = Disable |
| * [03:03] Quick Start Mode (QSTART) |
| * 1 = Quick start mode for the processor is enabled |
| * [02:02] Gated Clock Enable (GCLKEN) |
| * 1 = Enable |
| * 0 = Disable |
| * [01:01] AGP Disable (AGP_DIS) |
| * 1 = Disable |
| * 0 = Enable |
| * [00:00] CPU reset without PCIRST enable (CRst_En) |
| * 1 = Enable |
| * 0 = Disable |
| */ |
| /* Enable normal refresh and the gated clock. */ |
| // TODO: Only do this later? |
| // PMCR, 0x00, 0x14, |
| // PMCR, 0x00, 0x10, |
| PMCR, 0x00, 0x00, |
| }; |
| |
| /*----------------------------------------------------------------------------- |
| SDRAM configuration functions. |
| -----------------------------------------------------------------------------*/ |
| |
| /** |
| * Send the specified RAM command to all DIMMs. |
| * |
| * @param TODO |
| * @param TODO |
| */ |
| static void do_ram_command(uint32_t command, uint32_t addr_offset) |
| { |
| int i; |
| uint16_t reg; |
| |
| /* TODO: Support for multiple DIMMs. */ |
| |
| /* Configure the RAM command. */ |
| reg = pci_read_config16(NB, SDRAMC); |
| reg &= 0xff1f; /* Clear bits 7-5. */ |
| reg |= (uint16_t) (command << 5); |
| pci_write_config16(NB, SDRAMC, reg); |
| |
| /* RAM_COMMAND_NORMAL affects only the memory controller and |
| doesn't need to be "sent" to the DIMMs. */ |
| /* if (command == RAM_COMMAND_NORMAL) return; */ |
| |
| PRINT_DEBUG(" Sending RAM command 0x"); |
| PRINT_DEBUG_HEX16(reg); |
| PRINT_DEBUG(" to 0x"); |
| PRINT_DEBUG_HEX32(0 + addr_offset); // FIXME |
| PRINT_DEBUG("\r\n"); |
| |
| /* Read from (DIMM start address + addr_offset). */ |
| read32(0 + addr_offset); // FIXME |
| } |
| |
| /*----------------------------------------------------------------------------- |
| DIMM-independant configuration functions. |
| -----------------------------------------------------------------------------*/ |
| |
| static void spd_enable_refresh(void) |
| { |
| int i, value; |
| uint8_t reg; |
| |
| reg = pci_read_config8(NB, DRAMC); |
| |
| for (i = 0; i < DIMM_SOCKETS; i++) { |
| value = spd_read_byte(DIMM_SPD_BASE + i, SPD_REFRESH); |
| if (value < 0) |
| continue; |
| reg = (reg & 0xf8) | refresh_rate_map[(value & 0x7f)]; |
| |
| PRINT_DEBUG(" Enabling refresh (DRAMC = 0x"); |
| PRINT_DEBUG_HEX8(reg); |
| PRINT_DEBUG(") for DIMM "); |
| PRINT_DEBUG_HEX8(i); |
| PRINT_DEBUG("\r\n"); |
| } |
| |
| pci_write_config8(NB, DRAMC, reg); |
| } |
| |
| /*----------------------------------------------------------------------------- |
| Public interface. |
| -----------------------------------------------------------------------------*/ |
| |
| static void sdram_set_registers(void) |
| { |
| int i, max; |
| uint8_t reg; |
| |
| PRINT_DEBUG("Northbridge prior to SDRAM init:\r\n"); |
| DUMPNORTH(); |
| |
| max = ARRAY_SIZE(register_values); |
| |
| /* Set registers as specified in the register_values[] array. */ |
| for (i = 0; i < max; i += 3) { |
| reg = pci_read_config8(NB, register_values[i]); |
| reg &= register_values[i + 1]; |
| reg |= register_values[i + 2] & ~(register_values[i + 1]); |
| pci_write_config8(NB, register_values[i], reg); |
| |
| PRINT_DEBUG(" Set register 0x"); |
| PRINT_DEBUG_HEX8(register_values[i]); |
| PRINT_DEBUG(" to 0x"); |
| PRINT_DEBUG_HEX8(reg); |
| PRINT_DEBUG("\r\n"); |
| } |
| } |
| |
| static void sdram_set_spd_registers(void) |
| { |
| /* TODO: Don't hardcode the values here, get info via SPD. */ |
| |
| /* Map all legacy regions to RAM (read/write). This is required if |
| * you want to use the RAM area from 768 KB - 1 MB. If the PAM |
| * registers are not set here appropriately, the RAM in that region |
| * will not be accessible, thus a RAM check of it will also fail. |
| */ |
| pci_write_config8(NB, PAM0, 0x30); |
| pci_write_config8(NB, PAM1, 0x33); |
| pci_write_config8(NB, PAM2, 0x33); |
| pci_write_config8(NB, PAM3, 0x33); |
| pci_write_config8(NB, PAM4, 0x33); |
| pci_write_config8(NB, PAM5, 0x33); |
| pci_write_config8(NB, PAM6, 0x33); |
| |
| /* TODO: Set DRB0-DRB7. */ |
| /* Currently this is hardcoded to one 64 MB DIMM in slot 0. */ |
| pci_write_config8(NB, DRB0, 0x08); |
| pci_write_config8(NB, DRB1, 0x08); |
| pci_write_config8(NB, DRB2, 0x08); |
| pci_write_config8(NB, DRB3, 0x08); |
| pci_write_config8(NB, DRB4, 0x08); |
| pci_write_config8(NB, DRB5, 0x08); |
| pci_write_config8(NB, DRB6, 0x08); |
| pci_write_config8(NB, DRB7, 0x08); |
| |
| /* TODO: Set DRAMC. Don't enable refresh for now. */ |
| pci_write_config8(NB, DRAMC, 0x08); |
| |
| /* TODO: Set RPS. */ |
| pci_write_config16(NB, RPS, 0x0001); |
| |
| /* TODO: Set SDRAMC. */ |
| // pci_write_config16(NB, SDRAMC, 0x010f); // FIXME? |
| pci_write_config16(NB, SDRAMC, 0x0003); // FIXME? |
| |
| /* TODO: Set PGPOL. */ |
| // pci_write_config16(NB, PGPOL, 0x0107); |
| pci_write_config16(NB, PGPOL, 0x0123); |
| |
| /* TODO: Set NBXCFG. */ |
| // pci_write_config32(NB, NBXCFG, 0x0100220c); // FIXME? |
| pci_write_config32(NB, NBXCFG, 0xff00800c); |
| |
| /* TODO: Set PMCR? */ |
| // pci_write_config8(NB, PMCR, 0x14); |
| pci_write_config8(NB, PMCR, 0x10); |
| |
| /* TODO? */ |
| pci_write_config8(NB, PCI_LATENCY_TIMER, 0x40); |
| pci_write_config8(NB, DRAMT, 0x03); |
| pci_write_config8(NB, MBSC, 0x03); |
| pci_write_config8(NB, SCRR, 0x38); |
| } |
| |
| static void sdram_enable(void) |
| { |
| int i; |
| |
| /* 0. Wait until power/voltages and clocks are stable (200us). */ |
| udelay(200); |
| |
| /* 1. Apply NOP. Wait 200 clock cycles (200us should do). */ |
| PRINT_DEBUG("RAM Enable 1: Apply NOP\r\n"); |
| do_ram_command(RAM_COMMAND_NOP, 0); |
| udelay(200); |
| |
| /* 2. Precharge all. Wait tRP. */ |
| PRINT_DEBUG("RAM Enable 2: Precharge all\r\n"); |
| do_ram_command(RAM_COMMAND_PRECHARGE, 0); |
| udelay(1); |
| |
| /* 3. Perform 8 refresh cycles. Wait tRC each time. */ |
| PRINT_DEBUG("RAM Enable 3: CBR\r\n"); |
| for (i = 0; i < 8; i++) { |
| do_ram_command(RAM_COMMAND_CBR, 0); |
| udelay(1); |
| } |
| |
| /* 4. Mode register set. Wait two memory cycles. */ |
| PRINT_DEBUG("RAM Enable 4: Mode register set\r\n"); |
| do_ram_command(RAM_COMMAND_MRS, 0x1d0); |
| udelay(2); |
| |
| /* 5. Normal operation. */ |
| PRINT_DEBUG("RAM Enable 5: Normal operation\r\n"); |
| do_ram_command(RAM_COMMAND_NORMAL, 0); |
| udelay(1); |
| |
| /* 6. Finally enable refresh. */ |
| PRINT_DEBUG("RAM Enable 6: Enable refresh\r\n"); |
| // pci_write_config8(NB, PMCR, 0x10); |
| spd_enable_refresh(); |
| udelay(1); |
| |
| PRINT_DEBUG("Northbridge following SDRAM init:\r\n"); |
| DUMPNORTH(); |
| } |