| #include <console/console.h> |
| #include <arch/smp/mpspec.h> |
| #include <device/pci.h> |
| #include <string.h> |
| #include <stdint.h> |
| |
| void *smp_write_config_table(void *v) |
| { |
| static const char sig[4] = "PCMP"; |
| static const char oem[8] = "LNXI "; |
| static const char productid[12] = "X6DHE "; |
| struct mp_config_table *mc; |
| unsigned char bus_num; |
| unsigned char bus_isa; |
| unsigned char bus_pxhd_1; |
| unsigned char bus_pxhd_2; |
| unsigned char bus_esb6300_1; |
| unsigned char bus_esb6300_2; |
| |
| mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); |
| memset(mc, 0, sizeof(*mc)); |
| |
| memcpy(mc->mpc_signature, sig, sizeof(sig)); |
| mc->mpc_length = sizeof(*mc); /* initially just the header */ |
| mc->mpc_spec = 0x04; |
| mc->mpc_checksum = 0; /* not yet computed */ |
| memcpy(mc->mpc_oem, oem, sizeof(oem)); |
| memcpy(mc->mpc_productid, productid, sizeof(productid)); |
| mc->mpc_oemptr = 0; |
| mc->mpc_oemsize = 0; |
| mc->mpc_entry_count = 0; /* No entries yet... */ |
| mc->mpc_lapic = LAPIC_ADDR; |
| mc->mpe_length = 0; |
| mc->mpe_checksum = 0; |
| mc->reserved = 0; |
| |
| smp_write_processors(mc); |
| |
| { |
| device_t dev; |
| |
| /* esb6300_2 */ |
| dev = dev_find_slot(0, PCI_DEVFN(0x1c,0)); |
| if (dev) { |
| bus_esb6300_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| } |
| else { |
| printk_debug("ERROR - could not find PCI 0:1c.0, using defaults\n"); |
| |
| bus_esb6300_2 = 6; |
| } |
| /* esb6300_1 */ |
| dev = dev_find_slot(0, PCI_DEVFN(0x1e,0)); |
| if (dev) { |
| bus_esb6300_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); |
| bus_isa++; |
| } |
| else { |
| printk_debug("ERROR - could not find PCI 0:1e.0, using defaults\n"); |
| |
| bus_esb6300_1 = 7; |
| bus_isa = 8; |
| } |
| /* pxhd-1 */ |
| dev = dev_find_slot(1, PCI_DEVFN(0x0,0)); |
| if (dev) { |
| bus_pxhd_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| |
| } |
| else { |
| printk_debug("ERROR - could not find PCI 1:00.1, using defaults\n"); |
| |
| bus_pxhd_1 = 2; |
| } |
| /* pxhd-2 */ |
| dev = dev_find_slot(1, PCI_DEVFN(0x00,2)); |
| if (dev) { |
| bus_pxhd_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| |
| } |
| else { |
| printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); |
| |
| bus_pxhd_2 = 3; |
| } |
| } |
| |
| /* define bus and isa numbers */ |
| for(bus_num = 0; bus_num < bus_isa; bus_num++) { |
| smp_write_bus(mc, bus_num, "PCI "); |
| } |
| smp_write_bus(mc, bus_isa, "ISA "); |
| |
| /* IOAPIC handling */ |
| |
| smp_write_ioapic(mc, 2, 0x20, 0xfec00000); |
| smp_write_ioapic(mc, 3, 0x20, 0xfec10000); |
| { |
| struct resource *res; |
| device_t dev; |
| /* PXHd apic 4 */ |
| dev = dev_find_slot(1, PCI_DEVFN(0x00,1)); |
| if (dev) { |
| res = find_resource(dev, PCI_BASE_ADDRESS_0); |
| if (res) { |
| smp_write_ioapic(mc, 0x04, 0x20, res->base); |
| } |
| } |
| else { |
| printk_debug("ERROR - could not find IOAPIC PCI 1:00.1\n"); |
| printk_debug("DEBUG: Dev= %p\n", dev); |
| } |
| /* PXHd apic 5 */ |
| dev = dev_find_slot(1, PCI_DEVFN(0x00,3)); |
| if (dev) { |
| res = find_resource(dev, PCI_BASE_ADDRESS_0); |
| if (res) { |
| smp_write_ioapic(mc, 0x05, 0x20, res->base); |
| } |
| } |
| else { |
| printk_debug("ERROR - could not find IOAPIC PCI 1:00.3\n"); |
| printk_debug("DEBUG: Dev= %p\n", dev); |
| } |
| } |
| |
| |
| /* ISA backward compatibility interrupts */ |
| smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, |
| bus_isa, 0x00, 0x02, 0x00); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, |
| bus_isa, 0x01, 0x02, 0x01); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, |
| bus_isa, 0x00, 0x02, 0x02); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, |
| bus_isa, 0x03, 0x02, 0x03); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, |
| bus_isa, 0x04, 0x02, 0x04); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, |
| 0x00, 0x74, 0x02, 0x10); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, |
| bus_isa, 0x06, 0x02, 0x06); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, // added |
| bus_isa, 0x07, 0x02, 0x07); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, |
| bus_isa, 0x08, 0x02, 0x08); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, |
| bus_isa, 0x09, 0x02, 0x09); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, |
| 0x00, 0x77, 0x02, 0x17); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, |
| 0x00, 0x75, 0x02, 0x13); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, |
| bus_isa, 0x0c, 0x02, 0x0c); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, |
| bus_isa, 0x0d, 0x02, 0x0d); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, |
| bus_isa, 0x0e, 0x02, 0x0e); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, |
| bus_isa, 0x0f, 0x02, 0x0f); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, |
| 0x00, 0x7c, 0x02, 0x12); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, |
| 0x00, 0x7d, 0x02, 0x11); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, // -- added |
| 0x03, 0x08, 0x05, 0x00); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, // -- added |
| 0x03, 0x08, 0x05, 0x04); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, // -- added |
| bus_esb6300_1, 0x04, 0x03, 0x00); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, // -- added |
| bus_esb6300_1, 0x08, 0x03, 0x01); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, // -- added |
| bus_esb6300_2, 0x04, 0x02, 0x10); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, // -- added |
| bus_esb6300_2, 0x08, 0x02, 0x14); |
| |
| /* Standard local interrupt assignments */ |
| smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, |
| bus_isa, 0x00, MP_APIC_ALL, 0x00); |
| smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, |
| bus_isa, 0x00, MP_APIC_ALL, 0x01); |
| |
| #warning "FIXME verify I have the irqs handled for all of the risers" |
| |
| /* Compute the checksums */ |
| mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); |
| |
| mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); |
| printk_debug("Wrote the mp table end at: %p - %p\n", |
| mc, smp_next_mpe_entry(mc)); |
| return smp_next_mpe_entry(mc); |
| } |
| |
| unsigned long write_smp_table(unsigned long addr) |
| { |
| void *v; |
| v = smp_write_floating_table(addr); |
| return (unsigned long)smp_write_config_table(v); |
| } |
| |