| ## SPDX-License-Identifier: GPL-2.0-only |
| |
| chip northbridge/intel/sandybridge |
| # All MRC-capable boards in family (P8Z77-M[ PRO]) lists supported |
| # DIMMs down to 1.25v |
| register "ddr3lv_support" = "1" |
| # FIXME: Nothing can run native at 800MHz on p8z77-m, others may have same problem |
| register "max_mem_clock_mhz" = "CONFIG(USE_NATIVE_RAMINIT) ? 666 : 800" |
| register "spd_addresses" = "{0x50, 0x51, 0x52, 0x53}" |
| |
| register "usb_port_config" = "{ |
| {1, 0, 0x0080}, {1, 0, 0x0080}, {1, 1, 0x0080}, {1, 1, 0x0080}, {1, 2, 0x0080}, |
| {1, 2, 0x0080}, {1, 3, 0x0080}, {1, 3, 0x0080}, {1, 4, 0x0080}, {1, 4, 0x0080}, |
| {1, 6, 0x0080}, {1, 5, 0x0080}, {1, 5, 0x0080}, {1, 6, 0x0080} |
| }" |
| # 4 bit switch mask. 0=not switchable, 1=switchable |
| # Means once it's loaded the OS, it can swap ports |
| # from/to EHCI/xHCI. Z77 has four USB3 ports, so 0xf |
| register "usb3.hs_port_switch_mask" = "0xf" |
| # (The other 3 usb3.* settings can be set from nvram options, and so are set |
| # from runtime code) |
| |
| device domain 0 on |
| device ref host_bridge on end |
| device ref peg10 on end # PCIEX16_1 |
| device ref igd on end |
| |
| chip southbridge/intel/bd82x6x |
| register "sata_interface_speed_support" = "0x3" |
| register "sata_port_map" = "0x3f" |
| register "spi_lvscc" = "0x2005" |
| register "spi_uvscc" = "0x2005" |
| register "superspeed_capable_ports" = "0x0000000f" |
| register "xhci_overcurrent_mapping" = "0x00000c03" |
| register "xhci_switchable_ports" = "0x0000000f" |
| |
| device ref xhci on end |
| device ref mei1 on end |
| device ref mei2 off end |
| device ref me_ide_r off end |
| device ref me_kt off end |
| device ref gbe off end |
| device ref ehci2 on end |
| device ref hda on end |
| |
| device ref pcie_rp1 off end |
| device ref pcie_rp2 off end |
| device ref pcie_rp3 off end |
| device ref pcie_rp4 off end |
| device ref pcie_rp5 off end |
| device ref pcie_rp6 off end |
| device ref pcie_rp7 off end |
| device ref pcie_rp8 off end |
| |
| device ref ehci1 on end |
| device ref pci_bridge off end |
| device ref lpc on end |
| device ref sata1 on end # SATA (AHCI) |
| device ref smbus on end |
| device ref sata2 off end # SATA (Legacy) |
| device ref thermal off end |
| end |
| end |
| end |