| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2012 secunet Security Networks AG |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; version 2 of |
| * the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <arch/io.h> |
| #include "i82801ix.h" |
| |
| void i82801ix_early_init(void) |
| { |
| const device_t d31f0 = PCI_DEV(0, 0x1f, 0); |
| |
| /* Set up RCBA. */ |
| pci_write_config32(d31f0, D31F0_RCBA, DEFAULT_RCBA | 1); |
| |
| /* Set up PMBASE. */ |
| pci_write_config32(d31f0, D31F0_PMBASE, DEFAULT_PMBASE | 1); |
| /* Enable PMBASE. */ |
| pci_write_config8(d31f0, D31F0_ACPI_CNTL, 0x80); |
| |
| /* Set up GPIOBASE. */ |
| pci_write_config32(d31f0, D31F0_GPIO_BASE, DEFAULT_GPIOBASE); |
| /* Enable GPIO. */ |
| pci_write_config8(d31f0, D31F0_GPIO_CNTL, |
| pci_read_config8(d31f0, D31F0_GPIO_CNTL) | 0x10); |
| |
| /* Reset watchdog. */ |
| outw(0x0008, DEFAULT_TCOBASE + 0x04); /* R/WC, clear TCO caused SMI. */ |
| outw(0x0002, DEFAULT_TCOBASE + 0x06); /* R/WC, clear second timeout. */ |
| |
| /* Enable upper 128bytes of CMOS. */ |
| RCBA32(0x3400) = (1 << 2); |
| |
| /* Initialize power manangement initialization |
| register early as it affects reboot behavior. */ |
| /* Bit 20 activates global reset of host and ME on cf9 writes of 0x6 |
| and 0xe (required if ME is disabled but present), bit 31 locks it. |
| The other bits are 'must write'. */ |
| u8 reg8 = pci_read_config8(d31f0, 0xac); |
| reg8 |= (1 << 31) | (1 << 30) | (1 << 20) | (3 << 8); |
| pci_write_config8(d31f0, 0xac, reg8); |
| |
| /* TODO: If RTC power failed, reset RTC state machine |
| (set, then reset RTC 0x0b bit7) */ |
| |
| /* TODO: Check power state bits in GEN_PMCON_2 (D31F0 0xa2) |
| before they get cleared. */ |
| } |