| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| External(\_SB.DTTB, MethodObj) |
| External(\_SB.DTTC, MethodObj) |
| External(\_SB.DTTD, MethodObj) |
| External(\_SB.DTTE, MethodObj) |
| External(\_SB.DTTF, MethodObj) |
| |
| Scope (\_SB) |
| { |
| //--------------------------------------------- |
| // Table | A | B | C | D | E | F | First boot | |
| //--------------------------------------------- |
| // PRTN | 0 | 1 | 2 | 3 | 4 | 5 | 7 | |
| //--------------------------------------------- |
| Name (PRTN, 7) |
| |
| Method (DTTS, 0, Serialized) |
| { |
| // Set table A as default table after power on device |
| If (\_SB.PRTN == 7) |
| { |
| \_SB.DDEF() |
| \_SB.PRTN = 0 |
| Return (Zero) |
| } |
| |
| If (\_SB.PCI0.LPCB.EC0.STTB == 0) { // Desktop |
| If (\_SB.PCI0.LPCB.EC0.LIDS == 1) { // Lid-open |
| // Table A/B |
| If ((\_SB.PRTN == 0) || (\_SB.PRTN == 1)) { |
| // AMB sensor trigger point |
| // 50C will store 123(0x7B) in mapped memory |
| // 50C=323K, 323-200(offset)=123(0x7B) |
| If (\_SB.PCI0.LPCB.EC0.TIN4 >= 123) { |
| \_SB.DTTB() |
| \_SB.PRTN = 1 |
| Return (Zero) |
| } |
| // AMB sensor release point |
| If ((\_SB.PCI0.LPCB.EC0.TIN4 <= 118)) { |
| \_SB.DDEF() |
| \_SB.PRTN = 0 |
| Return (Zero) |
| } |
| // Keep tht previous thermal table |
| Return (Zero) |
| } Else { |
| If (\_SB.PRTN == 3 || \_SB.PRTN == 5) { |
| \_SB.DTTB() |
| \_SB.PRTN = 1 |
| Return (Zero) |
| } Else { |
| \_SB.DDEF() |
| \_SB.PRTN = 0 |
| Return (Zero) |
| } |
| } |
| } Else { // Lid-close |
| // Table C/D |
| If (\_SB.PRTN == 2 || \_SB.PRTN == 3) { |
| If (\_SB.PCI0.LPCB.EC0.TIN4 >= 128) { |
| \_SB.DTTD() |
| \_SB.PRTN = 3 |
| Return (Zero) |
| } |
| If(\_SB.PCI0.LPCB.EC0.TIN4 <= 123) { |
| \_SB.DTTC() |
| \_SB.PRTN = 2 |
| Return (Zero) |
| } |
| // Keep tht previous thermal table |
| Return (Zero) |
| } Else { |
| If (\_SB.PRTN == 1 || \_SB.PRTN == 5) { |
| \_SB.DTTD() |
| \_SB.PRTN = 3 |
| Return (Zero) |
| } Else { |
| \_SB.DTTC() |
| \_SB.PRTN = 2 |
| Return (Zero) |
| } |
| } |
| } |
| } Else { // Laptop |
| // Table E/F |
| If (\_SB.PRTN == 4 || \_SB.PRTN == 5) { |
| // AMB sensor trigger point |
| If (\_SB.PCI0.LPCB.EC0.TIN4 >= 118) { |
| \_SB.DTTF() |
| \_SB.PRTN = 5 |
| Return (Zero) |
| } |
| // AMB sensor release point |
| If ((\_SB.PCI0.LPCB.EC0.TIN4 <= 113)) { |
| \_SB.DTTE() |
| \_SB.PRTN = 4 |
| Return (Zero) |
| } |
| // Keep tht previous thermal table |
| Return (Zero) |
| } Else { |
| If (\_SB.PRTN == 1 || \_SB.PRTN == 3) { |
| \_SB.DTTF() |
| \_SB.PRTN = 5 |
| Return (Zero) |
| } Else { |
| \_SB.DTTE() |
| \_SB.PRTN = 4 |
| Return (Zero) |
| } |
| } |
| } // Desktop/Laptop End |
| } |
| } |