src/mainboard/amd/mandolin/Kconfig

# SPDX-License-Identifier: GPL-2.0-only

if BOARD_AMD_MANDOLIN || BOARD_AMD_CEREME

config BOARD_SPECIFIC_OPTIONS
	def_bool y
	select SOC_AMD_COMMON_BLOCK_USE_ESPI
	select SOC_AMD_PICASSO
	select HAVE_ACPI_TABLES
	select BOARD_ROMSIZE_KB_8192 if BOARD_AMD_MANDOLIN
	select BOARD_ROMSIZE_KB_16384 if BOARD_AMD_CEREME
	select AZALIA_PLUGIN_SUPPORT
	select HAVE_ACPI_RESUME
	select DRIVERS_UART_ACPI
	select PICASSO_CONSOLE_UART if !AMD_LPC_DEBUG_CARD

config FMDFILE
	string
	default "src/mainboard/amd/mandolin/variants/\$(CONFIG_VARIANT_DIR)/board.fmd"

config AMD_LPC_DEBUG_CARD
	bool "Enable LPC-Serial debug card on the debug header"
	default n
	select PICASSO_LPC_IOMUX
	select SUPERIO_SMSC_SIO1036
	help
	  AMD's debug card contains an SMSC SIO1036 device which provides
	  an I/O-based UART in the system.  This feature is not compatible with
	  CONFIG_HUDSON_UART enabling the memory-mapped UART in the chipset.
	  Note that Kconfig does not currently enforce this restriction.

config CBFS_SIZE
	hex
	default 0x7cf000 if BOARD_AMD_MANDOLIN # Maximum size for the Mandolin FMAP
	default 0xfcf000 if BOARD_AMD_CEREME # Maximum size for the Cereme FMAP

config MAINBOARD_DIR
	string
	default "amd/mandolin"

config VARIANT_DIR
	string
	default "mandolin" if BOARD_AMD_MANDOLIN
	default "cereme" if BOARD_AMD_CEREME

config MAINBOARD_PART_NUMBER
	string
	default "MANDOLIN" if BOARD_AMD_MANDOLIN
	default "CEREME" if BOARD_AMD_CEREME

config DEVICETREE
	string
	default "variants/\$(CONFIG_VARIANT_DIR)/devicetree.cb"

config ONBOARD_VGA_IS_PRIMARY
	bool
	default y

config AMD_FWM_POSITION_INDEX
	int
	default 3 if BOARD_AMD_MANDOLIN
	default 4 if BOARD_AMD_CEREME
	help
	  TODO: might need to be adapted for better placement of files in cbfs

config MANDOLIN_HAVE_MCHP_FW
	bool "Have Microchip EC firmware?"
	default n

config MANDOLIN_MCHP_FW_FILE
	string
	depends on MANDOLIN_HAVE_MCHP_FW
	default "3rdparty/blobs/mainboard/amd/mandolin/EC_mandolin.bin" if BOARD_AMD_MANDOLIN
	default "3rdparty/blobs/mainboard/amd/mandolin/EC_cereme.bin" if BOARD_AMD_CEREME

if !AMD_LPC_DEBUG_CARD
choice
	prompt "State of IOMux for LPC/eMMC signals"
	default MANDOLIN_IOMUX_USE_EMMC
	help
	  Mandolin is designed to use either LPC or eMMC signals.  Use this
	  selection to determine which are configured for this image.

config MANDOLIN_IOMUX_USE_LPC
	bool "LPC signals"

config MANDOLIN_IOMUX_USE_EMMC
	bool "eMMC signals"

endchoice
endif # !AMD_LPC_DEBUG_CARD

config PICASSO_LPC_IOMUX
	bool
	default y if MANDOLIN_IOMUX_USE_LPC
	help
	  Picasso's LPC bus signals are MUXed with some of the EMMC signals.
	  Select this option if LPC signals are required.

#TODO: remove this hack to not break graphics in combination with SeaBIOS
config VGA_BIOS_DGPU_ID
	string
	default "1002,15d8"
	help
	  The default VGA BIOS PCI vendor/device ID should be set to the
	  result of the map_oprom_vendev() function in northbridge.c.

config VGA_BIOS_DGPU_FILE
	string
	default "3rdparty/amd_blobs/picasso/PicassoGenericVbios.bin" if BOARD_AMD_MANDOLIN
	default "3rdparty/amd_blobs/picasso/Raven2GenericVbios.bin" if BOARD_AMD_CEREME

config EFS_SPI_READ_MODE
	int
	default 0 if EM100
	default 0 if BOARD_AMD_CEREME
	default 3

config EFS_SPI_SPEED
	int
	default 3 if EM100
	default 1 if BOARD_AMD_CEREME
	default 0

config EFS_SPI_MICRON_FLAG
	int
	default 0

endif # BOARD_AMD_MANDOLIN || BOARD_AMD_CEREME