| /* |
| * coreboot UEFI PEI wrapper |
| * |
| * Copyright (c) 2011, Google Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Google Inc. nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL GOOGLE INC BE LIABLE FOR ANY DIRECT, |
| * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef PEI_DATA_H |
| #define PEI_DATA_H |
| |
| #include <stdint.h> |
| |
| typedef void (*tx_byte_func)(unsigned char byte); |
| #define PEI_VERSION 15 |
| |
| #define MAX_USB2_PORTS 16 |
| #define MAX_USB3_PORTS 16 |
| #define USB_OC_PIN_SKIP 8 |
| |
| enum usb2_port_location { |
| USB_PORT_BACK_PANEL = 0, |
| USB_PORT_FRONT_PANEL, |
| USB_PORT_DOCK, |
| USB_PORT_MINI_PCIE, |
| USB_PORT_FLEX, |
| USB_PORT_INTERNAL, |
| USB_PORT_SKIP |
| }; |
| |
| /* Usb Port Length: |
| * [16:4] = length in inches in octal format |
| * [3:0] = decimal point |
| */ |
| struct usb2_port_setting { |
| uint16_t length; |
| uint8_t enable; |
| uint8_t over_current_pin; |
| uint8_t location; |
| } __packed; |
| |
| struct usb3_port_setting { |
| uint8_t enable; |
| uint8_t over_current_pin; |
| } __packed; |
| |
| struct pei_data |
| { |
| uint32_t pei_version; |
| uint32_t mchbar; |
| uint32_t dmibar; |
| uint32_t epbar; |
| uint32_t pciexbar; |
| uint16_t smbusbar; |
| /* Unused by HSW MRC, but changes to the memory layout of this struct break the ABI */ |
| uint32_t _unused_wdbbar; |
| uint32_t _unused_wdbsize; |
| uint32_t hpet_address; |
| uint32_t rcba; |
| uint32_t pmbase; |
| uint32_t gpiobase; |
| uint32_t temp_mmio_base; |
| uint32_t system_type; // 0 Mobile, 1 Desktop/Server |
| uint32_t tseg_size; |
| uint8_t spd_addresses[4]; |
| int boot_mode; |
| int ec_present; |
| int gbe_enable; |
| // 0 = leave channel enabled |
| // 1 = disable dimm 0 on channel |
| // 2 = disable dimm 1 on channel |
| // 3 = disable dimm 0+1 on channel |
| int dimm_channel0_disabled; |
| int dimm_channel1_disabled; |
| /* Enable 2x Refresh Mode */ |
| int ddr_refresh_2x; |
| int dq_pins_interleaved; |
| /* Data read from flash and passed into MRC */ |
| unsigned char *mrc_input; |
| unsigned int mrc_input_len; |
| /* Data from MRC that should be saved to flash */ |
| unsigned char *mrc_output; |
| unsigned int mrc_output_len; |
| /* Max frequency to run DDR3 at. Can be one of four values: 800, 1067, 1333, 1600 */ |
| uint32_t max_ddr3_freq; |
| /* Route all USB ports to XHCI controller in resume path */ |
| int usb_xhci_on_resume; |
| struct usb2_port_setting usb2_ports[MAX_USB2_PORTS]; |
| struct usb3_port_setting usb3_ports[MAX_USB3_PORTS]; |
| uint8_t spd_data[4][256]; |
| tx_byte_func tx_byte; |
| } __packed; |
| |
| #endif |