| ## This file is part of the coreboot project. |
| ## |
| ## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. |
| ## |
| ## This program is free software; you can redistribute it and/or modify |
| ## it under the terms of the GNU General Public License as published by |
| ## the Free Software Foundation; version 2 of the License. |
| ## |
| ## This program is distributed in the hope that it will be useful, |
| ## but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ## GNU General Public License for more details. |
| ## |
| ## You should have received a copy of the GNU General Public License |
| ## along with this program; if not, write to the Free Software |
| ## Foundation, Inc. |
| ## |
| |
| config MAINBOARD_HAS_CHROMEOS |
| def_bool n |
| |
| menu "ChromeOS" |
| depends on MAINBOARD_HAS_CHROMEOS |
| |
| config CHROMEOS |
| bool "Build for ChromeOS" |
| default n |
| select TPM |
| select TPM_INIT_FAILURE_IS_FATAL |
| select SKIP_TPM_STARTUP_ON_NORMAL_BOOT |
| select BOOTMODE_STRAPS |
| select ELOG |
| help |
| Enable ChromeOS specific features like the GPIO sub table in |
| the coreboot table. NOTE: Enabling this option on an unsupported |
| board will most likely break your build. |
| |
| if CHROMEOS |
| |
| config VBNV_OFFSET |
| hex |
| default 0x26 |
| depends on PC80_SYSTEM |
| help |
| CMOS offset for VbNv data. This value must match cmos.layout |
| in the mainboard directory, minus 14 bytes for the RTC. |
| |
| config VBNV_SIZE |
| hex |
| default 0x10 |
| depends on PC80_SYSTEM |
| help |
| CMOS storage size for VbNv data. This value must match cmos.layout |
| in the mainboard directory. |
| |
| config CHROMEOS_VBNV_CMOS |
| bool "Vboot non-volatile storage in CMOS." |
| default n |
| help |
| VBNV is stored in CMOS |
| |
| config CHROMEOS_VBNV_EC |
| bool "Vboot non-volatile storage in EC." |
| default n |
| help |
| VBNV is stored in EC |
| |
| config CHROMEOS_VBNV_FLASH |
| def_bool n |
| help |
| VBNV is stored in flash storage |
| |
| config CHROMEOS_RAMOOPS |
| bool "Reserve space for Chrome OS ramoops" |
| default y |
| |
| config CHROMEOS_RAMOOPS_DYNAMIC |
| bool "Allocate RAM oops buffer in cbmem" |
| default n |
| depends on CHROMEOS_RAMOOPS && HAVE_ACPI_TABLES |
| |
| config CHROMEOS_RAMOOPS_NON_ACPI |
| bool "Allocate RAM oops buffer in cbmem passed through cb tables to payload" |
| default n |
| depends on CHROMEOS_RAMOOPS && !HAVE_ACPI_TABLES |
| |
| config CHROMEOS_RAMOOPS_RAM_START |
| hex "Physical address of preserved RAM" |
| default 0x00f00000 |
| depends on CHROMEOS_RAMOOPS && !CHROMEOS_RAMOOPS_DYNAMIC |
| |
| config CHROMEOS_RAMOOPS_RAM_SIZE |
| hex "Size of preserved RAM" |
| default 0x00100000 |
| depends on CHROMEOS_RAMOOPS |
| |
| config EC_SOFTWARE_SYNC |
| bool "Enable EC software sync" |
| default n |
| depends on VBOOT_VERIFY_FIRMWARE |
| help |
| EC software sync is a mechanism where the AP helps the EC verify its |
| firmware similar to how vboot verifies the main system firmware. This |
| option selects whether depthcharge should support EC software sync. |
| |
| config VBOOT_EC_SLOW_UPDATE |
| bool "EC is slow to update" |
| default n |
| depends on EC_SOFTWARE_SYNC |
| help |
| Whether the EC (or PD) is slow to update and needs to display a |
| screen that informs the user the update is happening. |
| |
| config VBOOT_OPROM_MATTERS |
| bool "Video option ROM matters" |
| default n |
| depends on VBOOT_VERIFY_FIRMWARE |
| help |
| Whether the video option ROM has run matters on this platform. |
| |
| config VIRTUAL_DEV_SWITCH |
| bool "Virtual developer switch support" |
| default n |
| depends on VBOOT_VERIFY_FIRMWARE |
| help |
| Whether this platform has a virtual developer switch. |
| |
| config VBOOT_VERIFY_FIRMWARE |
| bool "Verify firmware with vboot." |
| default n |
| depends on CHROMEOS && HAVE_HARD_RESET |
| help |
| Enabling VBOOT_VERIFY_FIRMWARE will use vboot to verify the components |
| of the firmware (stages, payload, etc). |
| |
| config NO_TPM_RESUME |
| bool |
| default n |
| help |
| On some boards the TPM stays powered up in S3. On those |
| boards, booting Windows will break if the TPM resume command |
| is sent during an S3 resume. |
| |
| config PHYSICAL_REC_SWITCH |
| bool "Physical recovery switch is present" |
| default n |
| help |
| Whether this platform has a physical recovery switch |
| |
| config WIPEOUT_SUPPORTED |
| bool "User is able to request factory reset" |
| default n |
| help |
| When this option is enabled, the firmware provides the ability to |
| signal the application the need for factory reset (a.k.a. wipe |
| out) of the device |
| |
| source src/vendorcode/google/chromeos/vboot2/Kconfig |
| |
| endif # CHROMEOS |
| if !CHROMEOS |
| config VIRTUAL_DEV_SWITCH |
| bool |
| default n |
| depends on MAINBOARD_HAS_CHROMEOS |
| help |
| Whether this platform has a virtual developer switch. |
| endif |
| endmenu |