| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2012 secunet Security Networks AG |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <stdint.h> |
| #include <stdlib.h> |
| #include <arch/io.h> |
| //#include <pc80/mc146818rtc.h> |
| #include <device/device.h> |
| #include <console/console.h> |
| #include <drivers/intel/gma/int15.h> |
| #include <pc80/keyboard.h> |
| #include <ec/acpi/ec.h> |
| |
| #if CONFIG_GENERATE_ACPI_TABLES |
| #include "cstates.c" /* Include it, as the linker won't find |
| the overloaded weak function in there. */ |
| #endif |
| |
| static void ec_setup(void) |
| { |
| /* Thermal limits? Values are from ectool's ram dump. */ |
| ec_write(0xd1, 0x57); /* CPUH */ |
| ec_write(0xd2, 0xc9); /* CPUL */ |
| ec_write(0xd4, 0x64); /* SYSH */ |
| ec_write(0xd5, 0xc9); /* SYSL */ |
| |
| send_ec_command(0x04); /* Set_SMI_Enable */ |
| send_ec_command(0xab); /* Set_ACPI_Disable */ |
| send_ec_command(0xac); /* Clr_SYS_Flag? well, why not? */ |
| send_ec_command(0xad); /* Set_Thml_Value */ |
| } |
| |
| static void mainboard_enable(device_t dev) |
| { |
| ec_setup(); |
| /* LCD panel type is SIO GPIO40-43. |
| It's controlled by a DIP switch but was always |
| set to 4 while only values of 5 and 6 worked. */ |
| install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, (inb(0x60f) & 0x0f) + 1); |
| |
| /* We have no driver for the embedded controller since the firmware |
| does most of the job. Hence, initialize keyboards here. */ |
| pc_keyboard_init(); |
| } |
| |
| struct chip_operations mainboard_ops = { |
| .enable_dev = mainboard_enable, |
| }; |