| chip soc/intel/icelake |
| |
| device cpu_cluster 0 on |
| device lapic 0 on end |
| end |
| |
| # GPE configuration |
| # Note that GPE events called out in ASL code rely on this |
| # route. i.e. If this route changes then the affected GPE |
| # offset bits also need to be changed. |
| register "gpe0_dw0" = "GPP_B" |
| register "gpe0_dw1" = "GPP_D" |
| register "gpe0_dw2" = "GPP_E" |
| |
| # FSP configuration |
| register "SaGv" = "SaGv_Enabled" |
| register "SmbusEnable" = "1" |
| register "ScsEmmcHs400Enabled" = "1" |
| register "SdCardPowerEnableActiveHigh" = "1" |
| |
| register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" # USB3/2 Type A port1 |
| register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # USB3/2 Type A port2 |
| register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth |
| register "usb2_ports[3]" = "USB2_PORT_MID(OC0)" # Type-C Port1 |
| register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-C Port2 |
| register "usb2_ports[5]" = "USB2_PORT_MID(OC3)" # Type-C Port3 |
| register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # UNUSED |
| register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # UNUSED |
| register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # USB2 Type A port1 |
| register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # USB2 Type A port2 |
| |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port1 |
| register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port2 |
| register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3 WLAN |
| register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # UNUSED |
| register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC_SKIP)" # UNUSED |
| register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # UNUSED |
| |
| # Enable Pch iSCLK |
| register "pch_isclk" = "1" |
| |
| # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f |
| register "gen1_dec" = "0x00fc0801" |
| register "gen2_dec" = "0x000c0201" |
| # EC memory map range is 0x900-0x9ff |
| register "gen3_dec" = "0x00fc0901" |
| |
| register "PchHdaDspEnable" = "1" |
| register "PchHdaAudioLinkHda" = "1" |
| |
| register "PcieRpEnable[0]" = "1" |
| register "PcieRpEnable[1]" = "1" |
| register "PcieRpEnable[2]" = "1" |
| register "PcieRpEnable[3]" = "1" |
| register "PcieRpEnable[4]" = "1" |
| register "PcieRpEnable[5]" = "1" |
| register "PcieRpEnable[6]" = "1" |
| register "PcieRpEnable[7]" = "1" |
| register "PcieRpEnable[8]" = "1" |
| register "PcieRpEnable[9]" = "1" |
| register "PcieRpEnable[10]" = "1" |
| register "PcieRpEnable[11]" = "1" |
| register "PcieRpEnable[12]" = "1" |
| register "PcieRpEnable[13]" = "1" |
| register "PcieRpEnable[14]" = "1" |
| register "PcieRpEnable[15]" = "1" |
| |
| register "PcieClkSrcUsage[0]" = "0x80" |
| register "PcieClkSrcUsage[1]" = "8" |
| register "PcieClkSrcUsage[2]" = "0xC" |
| register "PcieClkSrcUsage[3]" = "0x70" |
| register "PcieClkSrcUsage[4]" = "4" |
| register "PcieClkSrcUsage[5]" = "2" |
| register "PcieClkSrcUsage[6]" = "0x80" |
| register "PcieClkSrcUsage[7]" = "0x80" |
| register "PcieClkSrcUsage[8]" = "0x80" |
| register "PcieClkSrcUsage[9]" = "0x80" |
| register "PcieClkSrcUsage[10]" = "0x80" |
| register "PcieClkSrcUsage[11]" = "0x80" |
| register "PcieClkSrcUsage[12]" = "0x80" |
| register "PcieClkSrcUsage[13]" = "0x80" |
| register "PcieClkSrcUsage[14]" = "0x80" |
| register "PcieClkSrcUsage[15]" = "0x80" |
| |
| register "PcieClkSrcClkReq[0]" = "0" |
| register "PcieClkSrcClkReq[1]" = "1" |
| register "PcieClkSrcClkReq[2]" = "2" |
| register "PcieClkSrcClkReq[3]" = "3" |
| register "PcieClkSrcClkReq[4]" = "4" |
| register "PcieClkSrcClkReq[5]" = "5" |
| register "PcieClkSrcClkReq[6]" = "6" |
| register "PcieClkSrcClkReq[7]" = "7" |
| register "PcieClkSrcClkReq[8]" = "8" |
| register "PcieClkSrcClkReq[9]" = "9" |
| register "PcieClkSrcClkReq[10]" = "10" |
| register "PcieClkSrcClkReq[11]" = "11" |
| register "PcieClkSrcClkReq[12]" = "12" |
| register "PcieClkSrcClkReq[13]" = "13" |
| register "PcieClkSrcClkReq[14]" = "14" |
| register "PcieClkSrcClkReq[15]" = "15" |
| |
| register "SataEnable" = "1" |
| register "SataSalpSupport" = "1" |
| register "SataPortsEnable[0]" = "1" |
| register "SataPortsEnable[1]" = "1" |
| register "SataPortsEnable[2]" = "1" |
| register "SataPortsEnable[3]" = "1" |
| register "SataPortsEnable[4]" = "1" |
| register "SataPortsEnable[5]" = "1" |
| register "SataPortsEnable[6]" = "1" |
| register "SataPortsEnable[7]" = "1" |
| |
| register "SataPortsDevSlp[0]" = "1" |
| register "SataPortsDevSlp[1]" = "1" |
| register "SataPortsDevSlp[2]" = "1" |
| register "SataPortsDevSlp[3]" = "1" |
| register "SataPortsDevSlp[4]" = "1" |
| register "SataPortsDevSlp[5]" = "1" |
| register "SataPortsDevSlp[6]" = "1" |
| register "SataPortsDevSlp[7]" = "1" |
| |
| register "SerialIoI2cMode" = "{ |
| [PchSerialIoIndexI2C0] = PchSerialIoPci, |
| [PchSerialIoIndexI2C1] = PchSerialIoPci, |
| [PchSerialIoIndexI2C2] = PchSerialIoPci, |
| [PchSerialIoIndexI2C3] = PchSerialIoPci, |
| [PchSerialIoIndexI2C4] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C5] = PchSerialIoPci, |
| }" |
| |
| register "SerialIoGSpiMode" = "{ |
| [PchSerialIoIndexGSPI0] = PchSerialIoDisabled, |
| [PchSerialIoIndexGSPI1] = PchSerialIoPci, |
| [PchSerialIoIndexGSPI2] = PchSerialIoDisabled, |
| }" |
| |
| register "SerialIoGSpiCsMode" = "{ |
| [PchSerialIoIndexGSPI0] = 1, |
| [PchSerialIoIndexGSPI1] = 1, |
| [PchSerialIoIndexGSPI2] = 1, |
| }" |
| |
| register "SerialIoGSpiCsState" = "{ |
| [PchSerialIoIndexGSPI0] = 0, |
| [PchSerialIoIndexGSPI1] = 0, |
| [PchSerialIoIndexGSPI2] = 0, |
| }" |
| |
| register "SerialIoUartMode" = "{ |
| [PchSerialIoIndexUART0] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART1] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART2] = PchSerialIoSkipInit, |
| }" |
| |
| # Enable DPTF |
| register "dptf_enable" = "1" |
| |
| # GPIO for SD card detect |
| register "sdcard_cd_gpio" = "GPP_G5" |
| |
| # Enable S0ix |
| register "s0ix_enable" = "0" |
| |
| # Intel Common SoC Config |
| #+-------------------+---------------------------+ |
| #| Field | Value | |
| #+-------------------+---------------------------+ |
| #| GSPI1 | cr50 TPM. Early init is | |
| #| | required to set up a BAR | |
| #| | for TPM communication | |
| #| | before memory is up | |
| #+-------------------+---------------------------+ |
| |
| register "common_soc_config" = "{ |
| .gspi[1] = { |
| .speed_mhz = 1, |
| .early_init = 1, |
| }, |
| }" |
| |
| device domain 0 on |
| device pci 00.0 on end # Host Bridge |
| device pci 02.0 on end # Integrated Graphics Device |
| device pci 04.0 off end # SA Thermal device |
| device pci 12.0 off end # Thermal Subsystem |
| device pci 12.5 off end # UFS SCS |
| device pci 12.6 off end # GSPI #2 |
| device pci 14.0 on |
| chip drivers/usb/acpi |
| register "desc" = ""Root Hub"" |
| register "type" = "UPC_TYPE_HUB" |
| device usb 0.0 on |
| chip drivers/usb/acpi |
| register "desc" = ""USB3-2 Type-A Left Lower"" |
| register "type" = "UPC_TYPE_A" |
| device usb 2.0 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3-2 Type-A Left Upper"" |
| register "type" = "UPC_TYPE_A" |
| device usb 2.1 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Bluetooth"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| device usb 2.2 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB C Connector 1"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| device usb 2.3 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB C Connector 2"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| device usb 2.4 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB C Connector 3"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| device usb 2.5 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Port Unused 1"" |
| register "type" = "UPC_TYPE_UNUSED" |
| device usb 2.6 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Port Unused 2"" |
| register "type" = "UPC_TYPE_UNUSED" |
| device usb 2.7 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Right Lower"" |
| register "type" = "UPC_TYPE_A" |
| device usb 2.8 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Right Upper"" |
| register "type" = "UPC_TYPE_A" |
| device usb 2.9 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3/2 Type-A Left Lower"" |
| register "type" = "UPC_TYPE_A" |
| device usb 3.0 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3/2 Type-A Left Upper"" |
| register "type" = "UPC_TYPE_A" |
| device usb 3.1 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""WLAN"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| device usb 3.2 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Port Unused1"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| device usb 3.3 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Port Unused2"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| device usb 3.4 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Port Unused3"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| device usb 3.5 on end |
| end |
| end |
| end |
| end # USB xHCI |
| device pci 14.1 off end # USB xDCI (OTG) |
| device pci 14.2 off end # PMC SRAM |
| device pci 14.3 on |
| chip drivers/wifi/generic |
| register "wake" = "GPE0_PME_B0" |
| device generic 0 on end |
| end |
| end # CNVi wifi |
| device pci 14.5 on end # SDCard |
| device pci 15.0 on |
| chip drivers/i2c/hid |
| register "generic.hid" = ""ALPS0000"" |
| register "generic.desc" = ""Touchpad"" |
| register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C8_IRQ)" |
| register "hid_desc_reg_offset" = "0x20" |
| device i2c 2c on end |
| end |
| end # I2C 0 |
| device pci 15.1 on end # I2C #1 |
| device pci 15.2 on end # I2C #2 |
| device pci 15.3 on end # I2C #3 |
| device pci 16.0 on end # Management Engine Interface 1 |
| device pci 16.1 off end # Management Engine Interface 2 |
| device pci 16.2 off end # Management Engine IDE-R |
| device pci 16.3 off end # Management Engine KT Redirection |
| device pci 16.4 off end # Management Engine Interface 3 |
| device pci 16.5 off end # Management Engine Interface 4 |
| device pci 17.0 on end # SATA |
| device pci 19.0 on end # I2C #4 |
| device pci 19.1 off end # I2C #5 |
| device pci 19.2 on end # UART #2 |
| device pci 1a.0 on end # eMMC |
| device pci 1c.0 on |
| chip drivers/wifi/generic |
| register "wake" = "GPE0_PCI_EXP" |
| device pci 00.0 on end |
| end |
| end # PCI Express Port 1 x4 SLOT1 |
| device pci 1c.4 on end # PCI Express Port 5 x1 SLOT2/LAN |
| device pci 1c.5 off end # PCI Express Port 6 |
| device pci 1c.6 off end # PCI Express Port 7 |
| device pci 1c.7 off end # PCI Express Port 8 |
| device pci 1d.0 on end # PCI Express Port 9 |
| device pci 1d.1 off end # PCI Express Port 10 |
| device pci 1d.2 off end # PCI Express Port 11 |
| device pci 1d.3 off end # PCI Express Port 12 |
| device pci 1d.4 off end # PCI Express Port 13 |
| device pci 1d.5 off end # PCI Express Port 14 |
| device pci 1d.6 off end # PCI Express Port 15 |
| device pci 1d.7 off end # PCI Express Port 16 |
| device pci 1e.0 on end # UART #0 |
| device pci 1e.1 off end # UART #1 |
| device pci 1e.2 off end # GSPI #0 |
| device pci 1e.3 on |
| chip drivers/spi/acpi |
| register "hid" = "ACPI_DT_NAMESPACE_HID" |
| register "compat_string" = ""google,cr50"" |
| register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)" |
| device spi 0 on end |
| end |
| end # GSPI #1 |
| device pci 1f.0 on end # eSPI Interface |
| device pci 1f.1 on end # P2SB |
| device pci 1f.2 on end # Power Management Controller |
| device pci 1f.3 on end # Intel HDA |
| device pci 1f.4 on end # SMBus |
| device pci 1f.5 on end # PCH SPI |
| device pci 1f.6 off end # GbE |
| end |
| end |