blob: 692fd8b7005d87ed80adf3b08113b9c56a657fb5 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-or-later */
#include <stdint.h>
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ops.h>
#include <device/pci_ids.h>
#include <pc80/isa-dma.h>
#include <pc80/mc146818rtc.h>
#include <arch/ioapic.h>
#if CONFIG(HAVE_ACPI_TABLES)
#include <acpi/acpi.h>
#include <acpi/acpigen.h>
#endif
#include "i82371eb.h"
#include "chip.h"
static void isa_init(struct device *dev)
{
u32 reg32;
struct southbridge_intel_i82371eb_config *sb = dev->chip_info;
/* Initialize the real time clock (RTC). */
cmos_init(0);
/*
* Enable special cycles, needed for soft poweroff.
*/
pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_SPECIAL);
/*
* The PIIX4 can support the full ISA bus, or the Extended I/O (EIO)
* bus, which is a subset of ISA. We select the full ISA bus here.
*/
reg32 = pci_read_config32(dev, GENCFG);
reg32 |= ISA; /* Select ISA, not EIO. */
/* Some boards use GPO22/23. Select it if configured. */
reg32 = ONOFF(sb->gpo22_enable, reg32, GPO2223);
pci_write_config32(dev, GENCFG, reg32);
/* Initialize ISA DMA. */
isa_dma_init();
/*
* Unlike most other southbridges the 82371EB doesn't have a built-in
* IOAPIC. Instead, 82371EB-based boards that support multiple CPUs
* have a discrete IOAPIC (Intel 82093AA) soldered onto the board.
*
* Thus, we can/must only enable the IOAPIC if it actually exists,
* i.e. the respective mainboard does "select IOAPIC".
*/
if (CONFIG(IOAPIC)) {
u16 reg16;
const u8 ioapic_id = 2;
/* Enable IOAPIC. */
reg16 = pci_read_config16(dev, XBCS);
reg16 |= (1 << 8); /* APIC Chip Select */
pci_write_config16(dev, XBCS, reg16);
/* Set and verify the IOAPIC ID. */
setup_ioapic(IO_APIC_ADDR, ioapic_id);
if (ioapic_id != get_ioapic_id(IO_APIC_ADDR))
die("IOAPIC error!\n");
}
}
#define ACPI_SCI_IRQ 9
void ioapic_get_sci_pin(u8 *gsi, u8 *irq, u8 *flags)
{
*gsi = ACPI_SCI_IRQ;
*irq = ACPI_SCI_IRQ;
*flags = MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH;
}
static void sb_read_resources(struct device *dev)
{
struct resource *res;
pci_dev_read_resources(dev);
res = new_resource(dev, 1);
res->base = 0x0UL;
res->size = 0x1000UL;
res->limit = 0xffffUL;
res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
res = new_resource(dev, 2);
res->base = 0xff800000UL;
res->size = 0x00800000UL; /* 8 MB for flash */
res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED |
IORESOURCE_RESERVE;
res = new_resource(dev, 3); /* IOAPIC */
res->base = IO_APIC_ADDR;
res->size = 0x00001000;
res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED |
IORESOURCE_RESERVE;
}
static const struct device_operations isa_ops = {
.read_resources = sb_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
#if CONFIG(HAVE_ACPI_TABLES)
.write_acpi_tables = acpi_write_hpet,
.acpi_fill_ssdt = generate_cpu_entries,
#endif
.init = isa_init,
.scan_bus = scan_static_bus,
.ops_pci = 0, /* No subsystem IDs on 82371EB! */
};
static const struct pci_driver isa_driver __pci_driver = {
.ops = &isa_ops,
.vendor = PCI_VID_INTEL,
.device = PCI_DID_INTEL_82371AB_ISA,
};
static const struct pci_driver isa_SB_driver __pci_driver = {
.ops = &isa_ops,
.vendor = PCI_VID_INTEL,
.device = PCI_DID_INTEL_82371SB_ISA,
};