| # SPDX-License-Identifier: GPL-2.0-only |
| |
| chip soc/intel/skylake |
| |
| register "SkipExtGfxScan" = "1" |
| |
| device domain 0 on |
| device pci 1c.0 off end # PCI Express Port 1 |
| device pci 1c.1 off end # PCI Express Port 2 |
| device pci 1c.2 off end # PCI Express Port 3 |
| device pci 1c.3 off end # PCI Express Port 4 |
| device pci 1d.3 off end # PCI Express Port 12 |
| device pci 1f.0 on |
| chip ec/kontron/kempld |
| device generic 1.0 on # I2C |
| chip drivers/i2c/lm96000 |
| register "vin[1].low" = "1140*100/116" |
| register "vin[1].high" = "1260*100/116" |
| register "vin[0].low" = "1810" |
| register "vin[0].high" = "2000" |
| register "vin[2].low" = "3140" |
| register "vin[2].high" = "3470" |
| register "vin[3].low" = "4750" |
| register "vin[3].high" = "5250" |
| register "vin[4].low" = "11400" |
| register "vin[4].high" = "12600" |
| |
| register "fan_in[0].low" = "3240" |
| register "fan_in[1].low" = "3240" |
| |
| register "fan[0].mode" = "LM96000_FAN_MANUAL" |
| register "fan[0].spinup" = "LM96000_SPINUP_250MS" |
| register "fan[0].freq" = "LM96000_PWM_25_7KHZ" |
| register "fan[0].duty_cycle" = "100" |
| |
| register "fan[1].mode" = "LM96000_FAN_MANUAL" |
| register "fan[1].spinup" = "LM96000_SPINUP_250MS" |
| register "fan[1].freq" = "LM96000_PWM_25_7KHZ" |
| register "fan[1].duty_cycle" = "100" |
| |
| device i2c 0x2c on end |
| end |
| chip drivers/secunet/dmi |
| device i2c 0x57 on end # Serial EEPROM |
| end |
| end |
| end |
| end # LPC Interface |
| device pci 1f.4 on |
| chip drivers/i2c/nct7802y |
| register "fan[1].mode" = "FAN_MANUAL" |
| register "fan[1].duty_cycle" = "100" |
| end |
| end # SMBus |
| device pci 1f.5 on end # PCH SPI |
| device pci 1f.6 on end # GbE # Debug |
| end |
| end |