| ## |
| ## This file is part of the coreboot project. |
| ## |
| ## Copyright (C) 2012 Ricardo Martins <rasmartins@gmail.com> |
| ## |
| ## This program is free software; you can redistribute it and/or |
| ## modify it under the terms of the GNU General Public License as |
| ## published by the Free Software Foundation; version 2 of |
| ## the License. |
| ## |
| ## This program is distributed in the hope that it will be useful, |
| ## but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ## GNU General Public License for more details. |
| ## |
| ## You should have received a copy of the GNU General Public License |
| ## along with this program; if not, write to the Free Software |
| ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| ## MA 02110-1301 USA |
| ## |
| |
| chip northbridge/amd/lx |
| device pci_domain 0 on |
| device pci 1.0 on end # Northbridge |
| device pci 1.1 on end # Video Adapter |
| device pci 1.2 on end # AES Security Block |
| chip southbridge/amd/cs5536 |
| register "lpc_serirq_enable" = "0x0000115a" |
| register "lpc_serirq_polarity" = "0x0000eea5" |
| register "lpc_serirq_mode" = "1" |
| register "enable_gpio_int_route" = "0x0d0c0700" |
| register "enable_ide_nand_flash" = "0" |
| register "enable_USBP4_device" = "0" # 0:host, 1:device |
| register "enable_USBP4_overcurrent" = "0" |
| register "com1_enable" = "1" # CN10 (RS422/486 COM3) |
| register "com1_address" = "0x3e8" |
| register "com1_irq" = "5" |
| register "com2_enable" = "0" |
| register "unwanted_vpci[0]" = "0" # End of list has a zero |
| device pci e.0 on end # RTL8100C |
| device pci f.0 on # ISA Bridge |
| chip superio/winbond/w83627ehg # Winbond W83627EHG |
| device pnp 2e.0 on # Floppy |
| io 0x60 = 0x3f0 |
| irq 0x70 = 6 |
| drq 0x74 = 2 |
| end |
| |
| device pnp 2e.1 on # Parallel port |
| io 0x60 = 0x378 |
| irq 0x70 = 7 |
| drq 0x74 = 3 |
| end |
| |
| device pnp 2e.2 on # COM1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| |
| device pnp 2e.3 on # COM2 |
| io 0x60 = 0x2f8 |
| irq 0x70 = 3 |
| end |
| |
| device pnp 2e.5 on # PS/2 keyboard/mouse |
| io 0x60 = 0x60 |
| io 0x62 = 0x64 |
| irq 0x70 = 1 # Keyboard |
| irq 0x72 = 12 # Mouse |
| end |
| |
| device pnp 2e.b on # HW Monitor |
| io 0x60 = 0x290 |
| irq 0x70 = 0 |
| end |
| |
| device pnp 2e.6 off end # Serial Flash Interface |
| device pnp 2e.7 off end # GPIO1, GPIO6, Game Port & MIDI Port |
| device pnp 2e.8 off end # WDTO# & PLED |
| device pnp 2e.9 off end # GPIO2,GPIO3, GPIO4, GPIO5 & SUSLED |
| device pnp 2e.a off end # ACPI |
| device pnp 2e.106 off end # |
| device pnp 2e.107 off end # |
| device pnp 2e.207 off end # |
| |
| end |
| end |
| device pci f.2 on end # IDE Controller |
| device pci f.3 off end # Audio (N/A) |
| device pci f.4 on end # OHCI |
| device pci f.5 on end # EHCI |
| end |
| end |
| |
| # APIC cluster is late CPU init. |
| device lapic_cluster 0 on |
| chip cpu/amd/geode_lx |
| device lapic 0 on end |
| end |
| end |
| end |