| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| /** |
| * @file |
| * |
| * AMD User options selection for a Brazos platform solution system |
| * |
| * This file is placed in the user's platform directory and contains the |
| * build option selections desired for that platform. |
| * |
| * For Information about this file, see @ref platforminstall. |
| */ |
| |
| /* Select the CPU family. */ |
| #define INSTALL_FAMILY_14_SUPPORT TRUE |
| |
| /* Select the CPU socket type. */ |
| #define INSTALL_FT1_SOCKET_SUPPORT TRUE |
| |
| /* |
| * Agesa optional capabilities selection. |
| * Uncomment and mark FALSE those features you wish to include in the build. |
| * Comment out or mark TRUE those features you want to REMOVE from the build. |
| */ |
| |
| #define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE |
| #define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE |
| #define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE |
| #define BLDOPT_REMOVE_ECC_SUPPORT FALSE |
| //#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE |
| #define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE |
| #define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE |
| #define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE |
| #define BLDOPT_REMOVE_DQS_TRAINING FALSE |
| #define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE |
| #define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE |
| #define BLDOPT_REMOVE_ACPI_PSTATES FALSE |
| #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE |
| #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE |
| #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE |
| #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE |
| #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE |
| #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE |
| #define BLDOPT_REMOVE_SRAT FALSE |
| #define BLDOPT_REMOVE_SLIT FALSE |
| #define BLDOPT_REMOVE_WHEA FALSE |
| #define BLDOPT_REMOVE_DMI FALSE |
| #define BLDOPT_REMOVE_HT_ASSIST TRUE |
| #define BLDOPT_REMOVE_ATM_MODE TRUE |
| //#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE |
| //#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE |
| #define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE |
| //#define BLDOPT_REMOVE_C6_STATE TRUE |
| #define BLDOPT_REMOVE_GFX_RECOVERY TRUE |
| #define BLDOPT_REMOVE_EARLY_SAMPLES TRUE |
| |
| #define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS |
| #define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER |
| |
| #define BLDCFG_VRM_CURRENT_LIMIT 24000 |
| //#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 |
| #define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000 |
| #define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 |
| #define BLDCFG_VRM_SLEW_RATE 5000 |
| //#define BLDCFG_VRM_NB_SLEW_RATE 5000 |
| //#define BLDCFG_VRM_ADDITIONAL_DELAY 0 |
| //#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 |
| #define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE |
| //#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE |
| #define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000 |
| //#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 |
| |
| //#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C' |
| //#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' |
| //#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE |
| #define BLDCFG_PLAT_NUM_IO_APICS 3 |
| //#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled |
| //#define BLDCFG_PLATFORM_C1E_OPDATA 0 |
| //#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0 |
| //#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0 |
| #define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 |
| #define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840 |
| #define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840 |
| //#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto |
| #define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST |
| #define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList |
| #define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE |
| //#define BLDCFG_STARTING_BUSNUM 0 |
| //#define BLDCFG_MAXIMUM_BUSNUM 0xf8 |
| //#define BLDCFG_ALLOCATED_BUSNUMS 0x20 |
| //#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0 |
| //#define BLDCFG_BUID_SWAP_LIST 0 |
| //#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0 |
| //#define BLDCFG_HTFABRIC_LIMITS_LIST 0 |
| //#define BLDCFG_HTCHAIN_LIMITS_LIST 0 |
| //#define BLDCFG_BUS_NUMBERS_LIST 0 |
| //#define BLDCFG_IGNORE_LINK_LIST 0 |
| //#define BLDCFG_LINK_SKIP_REGANG_LIST 0 |
| //#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0 |
| //#define BLDCFG_USE_HT_ASSIST TRUE |
| //#define BLDCFG_USE_ATM_MODE TRUE |
| //#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm |
| #define BLDCFG_S3_LATE_RESTORE TRUE |
| //#define BLDCFG_USE_32_BYTE_REFRESH FALSE |
| //#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE |
| //#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance |
| //#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE |
| //#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE |
| //#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0 |
| #define BLDCFG_CFG_GNB_HD_AUDIO FALSE |
| //#define BLDCFG_CFG_ABM_SUPPORT FALSE |
| //#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0 |
| //#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0 |
| //#define BLDCFG_MEM_INIT_PSTATE 0 |
| //#define BLDCFG_AMD_PSTATE_CAP_VALUE 0 |
| #define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY |
| #define BLDCFG_MEMORY_MODE_UNGANGED TRUE |
| //#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE |
| //#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED |
| #define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE |
| #define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE |
| #define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE |
| #define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE |
| #define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE |
| #define BLDCFG_MEMORY_POWER_DOWN TRUE |
| #define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT |
| //#define BLDCFG_ONLINE_SPARE FALSE |
| //#define BLDCFG_MEMORY_PARITY_ENABLE FALSE |
| #define BLDCFG_BANK_SWIZZLE TRUE |
| #define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO |
| #define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY |
| #define BLDCFG_DQS_TRAINING_CONTROL TRUE |
| #define BLDCFG_IGNORE_SPD_CHECKSUM FALSE |
| #define BLDCFG_USE_BURST_MODE FALSE |
| #define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE |
| //#define BLDCFG_ENABLE_ECC_FEATURE TRUE |
| //#define BLDCFG_ECC_REDIRECTION FALSE |
| //#define BLDCFG_SCRUB_DRAM_RATE 0 |
| //#define BLDCFG_SCRUB_L2_RATE 0 |
| //#define BLDCFG_SCRUB_L3_RATE 0 |
| //#define BLDCFG_SCRUB_IC_RATE 0 |
| //#define BLDCFG_SCRUB_DC_RATE 0 |
| //#define BLDCFG_ECC_SYNC_FLOOD 0 |
| //#define BLDCFG_ECC_SYMBOL_SIZE 0 |
| //#define BLDCFG_1GB_ALIGN FALSE |
| #define BLDCFG_UMA_ALLOCATION_MODE UMA_NONE |
| #define BLDCFG_UMA_ALLOCATION_SIZE 0 |
| #define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE |
| #define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED |
| #define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 |
| #define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000 |
| |
| /* |
| * Agesa configuration values selection. |
| * Uncomment and specify the value for the configuration options |
| * needed by the system. |
| */ |
| #include <AGESA.h> |
| |
| /* The fixed MTRR values to be set after memory initialization. */ |
| CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = |
| { |
| { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull }, |
| { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull }, |
| { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull }, |
| { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull }, |
| { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull }, |
| { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull }, |
| { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull }, |
| { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull }, |
| { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull }, |
| { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull }, |
| { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull }, |
| { CPU_LIST_TERMINAL } |
| }; |
| |
| /* Include the files that instantiate the configuration definitions. */ |
| |
| #include "cpuRegisters.h" |
| #include "cpuFamRegisters.h" |
| #include "cpuFamilyTranslation.h" |
| #include "AdvancedApi.h" |
| #include "heapManager.h" |
| #include "CreateStruct.h" |
| #include "cpuFeatures.h" |
| #include "Table.h" |
| #include "cpuEarlyInit.h" |
| #include "cpuLateInit.h" |
| #include "GnbInterface.h" |
| |
| /* MEMORY_BUS_SPEED */ |
| #define DDR400_FREQUENCY 200 ///< DDR 400 |
| #define DDR533_FREQUENCY 266 ///< DDR 533 |
| #define DDR667_FREQUENCY 333 ///< DDR 667 |
| #define DDR800_FREQUENCY 400 ///< DDR 800 |
| #define DDR1066_FREQUENCY 533 ///< DDR 1066 |
| #define DDR1333_FREQUENCY 667 ///< DDR 1333 |
| #define DDR1600_FREQUENCY 800 ///< DDR 1600 |
| #define DDR1866_FREQUENCY 933 ///< DDR 1866 |
| #define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency |
| |
| /* QUANDRANK_TYPE */ |
| #define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM |
| #define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM |
| |
| /* USER_MEMORY_TIMING_MODE */ |
| #define TIMING_MODE_AUTO 0 ///< Use best rate possible |
| #define TIMING_MODE_LIMITED 1 ///< Set user top limit |
| #define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed |
| |
| /* POWER_DOWN_MODE */ |
| #define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode |
| #define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode |
| |
| // The following definitions specify the default values for various parameters in which there are |
| // no clearly defined defaults to be used in the common file. The values below are based on product |
| // and BKDG content, please consult the AGESA Memory team for consultation. |
| #define DFLT_SCRUB_DRAM_RATE (0) |
| #define DFLT_SCRUB_L2_RATE (0) |
| #define DFLT_SCRUB_L3_RATE (0) |
| #define DFLT_SCRUB_IC_RATE (0) |
| #define DFLT_SCRUB_DC_RATE (0) |
| #define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED |
| #define DFLT_VRM_SLEW_RATE (5000) |
| |
| // Instantiate all solution relevant data. |
| #include <PlatformInstall.h> |