| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <arch/io.h> |
| #include <bootblock_common.h> |
| #include <build.h> |
| #include <console/console.h> |
| #include <device/pci_ops.h> |
| #include <fsp/util.h> |
| #include <pc80/mc146818rtc.h> |
| #include <soc/gpio.h> |
| #include <soc/iomap.h> |
| #include <soc/iosf.h> |
| #include <soc/lpc.h> |
| #include <soc/msr.h> |
| #include <soc/pm.h> |
| #include <soc/spi.h> |
| |
| asmlinkage void bootblock_c_entry(uint64_t base_timestamp) |
| { |
| /* Call lib/bootblock.c main */ |
| bootblock_main_with_basetime(base_timestamp); |
| } |
| |
| static void program_base_addresses(void) |
| { |
| uint32_t reg; |
| const uint32_t lpc_dev = PCI_DEV(0, LPC_DEV, LPC_FUNC); |
| |
| /* Memory Mapped IO registers. */ |
| reg = PMC_BASE_ADDRESS | 2; |
| pci_write_config32(lpc_dev, PBASE, reg); |
| reg = IO_BASE_ADDRESS | 2; |
| pci_write_config32(lpc_dev, IOBASE, reg); |
| reg = ILB_BASE_ADDRESS | 2; |
| pci_write_config32(lpc_dev, IBASE, reg); |
| reg = SPI_BASE_ADDRESS | 2; |
| pci_write_config32(lpc_dev, SBASE, reg); |
| reg = MPHY_BASE_ADDRESS | 2; |
| pci_write_config32(lpc_dev, MPBASE, reg); |
| reg = PUNIT_BASE_ADDRESS | 2; |
| pci_write_config32(lpc_dev, PUBASE, reg); |
| reg = RCBA_BASE_ADDRESS | 1; |
| pci_write_config32(lpc_dev, RCBA, reg); |
| |
| /* IO Port Registers. */ |
| reg = ACPI_BASE_ADDRESS | 2; |
| pci_write_config32(lpc_dev, ABASE, reg); |
| reg = GPIO_BASE_ADDRESS | 2; |
| pci_write_config32(lpc_dev, GBASE, reg); |
| } |
| |
| static void tco_disable(void) |
| { |
| uint32_t reg; |
| |
| reg = inl(ACPI_BASE_ADDRESS + TCO1_CNT); |
| reg |= TCO_TMR_HALT; |
| outl(reg, ACPI_BASE_ADDRESS + TCO1_CNT); |
| } |
| |
| static void spi_init(void) |
| { |
| void *scs = (void *)(SPI_BASE_ADDRESS + SCS); |
| void *bcr = (void *)(SPI_BASE_ADDRESS + BCR); |
| uint32_t reg; |
| |
| /* Disable generating SMI when setting WPD bit. */ |
| write32(scs, read32(scs) & ~SMIWPEN); |
| /* |
| * Enable caching and prefetching in the SPI controller. Disable |
| * the SMM-only BIOS write and set WPD bit. |
| */ |
| reg = (read32(bcr) & ~SRC_MASK) | SRC_CACHE_PREFETCH | BCR_WPD; |
| reg &= ~EISS; |
| write32(bcr, reg); |
| } |
| |
| static void soc_rtc_init(void) |
| { |
| int rtc_failed = rtc_failure(); |
| |
| if (rtc_failed) { |
| printk(BIOS_ERR, "RTC Failure detected. Resetting date to %x/%x/%x%x\n", |
| COREBOOT_BUILD_MONTH_BCD, COREBOOT_BUILD_DAY_BCD, 0x20, |
| COREBOOT_BUILD_YEAR_BCD); |
| } |
| |
| cmos_init(rtc_failed); |
| } |
| |
| static void setup_mmconfig(void) |
| { |
| uint32_t reg; |
| |
| /* |
| * Set up the MMCONF range. The register lives in the BUNIT. The IO variant of the |
| * config access needs to be used initially to properly configure as the IOSF access |
| * registers live in PCI config space. |
| */ |
| reg = 0; |
| /* Clear the extended register. */ |
| pci_io_write_config32(IOSF_PCI_DEV, MCRX_REG, reg); |
| reg = CONFIG_MMCONF_BASE_ADDRESS | 1; |
| pci_io_write_config32(IOSF_PCI_DEV, MDR_REG, reg); |
| reg = IOSF_OPCODE(IOSF_OP_WRITE_BUNIT) | IOSF_PORT(IOSF_PORT_BUNIT) | |
| IOSF_REG(BUNIT_MMCONF_REG) | IOSF_BYTE_EN; |
| pci_io_write_config32(IOSF_PCI_DEV, MCR_REG, reg); |
| } |
| |
| void bootblock_soc_early_init(void) |
| { |
| /* Allow memory-mapped PCI config access */ |
| setup_mmconfig(); |
| |
| /* Early chipset initialization */ |
| program_base_addresses(); |
| tco_disable(); |
| } |
| void bootblock_soc_init(void) |
| { |
| report_fsp_output(); |
| |
| /* Continue chipset initialization */ |
| soc_rtc_init(); |
| set_max_freq(); |
| spi_init(); |
| |
| lpc_init(); |
| } |