| menu "Console" |
| # TODO: Rename to SERIAL_CONSOLE once Kconfig transition is complete. |
| config CONSOLE_SERIAL8250 |
| bool "Serial port console output" |
| depends on HAVE_UART_IO_MAPPED |
| default y |
| help |
| Send coreboot debug output to an I/O mapped serial port console. |
| |
| config CONSOLE_SERIAL8250MEM |
| bool "Serial port console output (memory mapped)" |
| depends on HAVE_UART_MEMORY_MAPPED |
| help |
| Send coreboot debug output to a memory mapped serial port console. |
| |
| choice |
| prompt "Serial port" |
| default CONSOLE_SERIAL_COM1 |
| depends on CONSOLE_SERIAL8250 |
| |
| config CONSOLE_SERIAL_COM1 |
| bool "COM1/ttyS0, I/O port 0x3f8" |
| help |
| Serial console on COM1/ttyS0 at I/O port 0x3f8. |
| config CONSOLE_SERIAL_COM2 |
| bool "COM2/ttyS1, I/O port 0x2f8" |
| help |
| Serial console on COM2/ttyS1 at I/O port 0x2f8. |
| config CONSOLE_SERIAL_COM3 |
| bool "COM3/ttyS2, I/O port 0x3e8" |
| help |
| Serial console on COM3/ttyS2 at I/O port 0x3e8. |
| config CONSOLE_SERIAL_COM4 |
| bool "COM4/ttyS3, I/O port 0x2e8" |
| help |
| Serial console on COM4/ttyS3 at I/O port 0x2e8. |
| |
| endchoice |
| |
| config TTYS0_BASE |
| hex |
| depends on CONSOLE_SERIAL8250 |
| default 0x3f8 if CONSOLE_SERIAL_COM1 |
| default 0x2f8 if CONSOLE_SERIAL_COM2 |
| default 0x3e8 if CONSOLE_SERIAL_COM3 |
| default 0x2e8 if CONSOLE_SERIAL_COM4 |
| help |
| Map the COM port names to the respective I/O port. |
| |
| choice |
| prompt "Baud rate" |
| default CONSOLE_SERIAL_115200 |
| depends on CONSOLE_SERIAL8250 || CONSOLE_SERIAL8250MEM |
| |
| config CONSOLE_SERIAL_115200 |
| bool "115200" |
| help |
| Set serial port Baud rate to 115200. |
| config CONSOLE_SERIAL_57600 |
| bool "57600" |
| help |
| Set serial port Baud rate to 57600. |
| config CONSOLE_SERIAL_38400 |
| bool "38400" |
| help |
| Set serial port Baud rate to 38400. |
| config CONSOLE_SERIAL_19200 |
| bool "19200" |
| help |
| Set serial port Baud rate to 19200. |
| config CONSOLE_SERIAL_9600 |
| bool "9600" |
| help |
| Set serial port Baud rate to 9600. |
| |
| endchoice |
| |
| config TTYS0_BAUD |
| int |
| default 115200 if CONSOLE_SERIAL_115200 |
| default 57600 if CONSOLE_SERIAL_57600 |
| default 38400 if CONSOLE_SERIAL_38400 |
| default 19200 if CONSOLE_SERIAL_19200 |
| default 9600 if CONSOLE_SERIAL_9600 |
| help |
| Map the Baud rates to an integer. |
| |
| # TODO: Allow user-friendly selection of settings other than 8n1. |
| config TTYS0_LCS |
| int |
| default 3 |
| depends on CONSOLE_SERIAL8250 || CONSOLE_SERIAL8250MEM |
| |
| # Use "select HAVE_USBDEBUG" on southbridges which have Debug Port code. |
| config HAVE_USBDEBUG |
| def_bool n |
| |
| config USBDEBUG |
| def_bool n |
| |
| config USBDEBUG |
| bool "USB 2.0 EHCI debug dongle support" |
| default n |
| depends on HAVE_USBDEBUG |
| help |
| This option allows you to use a so-called USB EHCI Debug device |
| (such as the Ajays NET20DC, AMIDebug RX, or a system using the |
| Linux "EHCI Debug Device gadget" driver found in recent kernel) |
| to retrieve the coreboot debug messages (instead, or in addition |
| to, a serial port). |
| |
| This feature is NOT supported on all chipsets in coreboot! |
| |
| It also requires a USB2 controller which supports the EHCI |
| Debug Port capability. |
| |
| See http://www.coreboot.org/EHCI_Debug_Port for an up-to-date list |
| of supported controllers. |
| |
| If unsure, say N. |
| |
| # Note: This option doesn't make sense on Intel ICH / AMD SB600 southbridges |
| # as those hardcode the physical USB port to be used as Debug Port to 1. |
| # It cannot be changed by coreboot. |
| config USBDEBUG_DEFAULT_PORT |
| int "Default USB port to use as Debug Port" |
| default 1 |
| depends on USBDEBUG && !SOUTHBRIDGE_INTEL_I82801GX && !SOUTHBRIDGE_AMD_SB600 |
| help |
| This option selects which physical USB port coreboot will try to |
| use as EHCI Debug Port first (valid values are: 1-15). |
| |
| If coreboot doesn't detect an EHCI Debug Port dongle on this port, |
| it will try all the other ports one after the other. This will take |
| a few seconds of time though, and thus slow down the booting process. |
| |
| Hence, if you select the correct port here, you can speed up |
| your boot time. Which USB port number (1-15) refers to which |
| actual port on your mainboard (potentially also USB pin headers |
| on your mainboard) is highly board-specific, and you'll likely |
| have to find out by trial-and-error. |
| |
| # TODO: Deps? |
| # TODO: Improve description. |
| config ONBOARD_VGA_IS_PRIMARY |
| bool "Use onboard VGA as primary video device" |
| default n |
| help |
| If not selected, the last adapter found will be used. |
| |
| config CONSOLE_NE2K |
| bool "Network console over NE2000 compatible Ethernet adapter" |
| default n |
| help |
| Send coreboot debug output to a Ethernet console, it works |
| same way as Linux netconsole, packets are received to UDP |
| port 6666 on IP/MAC specified with options bellow. |
| Use following netcat command: nc -u -l -p 6666 |
| |
| config CONSOLE_NE2K_DST_MAC |
| depends on CONSOLE_NE2K |
| string "Destination MAC address of remote system" |
| default "00:13:d4:76:a2:ac" |
| help |
| Type in either MAC address of logging system or MAC address |
| of the router. |
| |
| config CONSOLE_NE2K_DST_IP |
| depends on CONSOLE_NE2K |
| string "Destination IP of logging system" |
| default "10.0.1.27" |
| help |
| This is IP adress of the system running for example |
| netcat command to dump the packets. |
| |
| config CONSOLE_NE2K_SRC_IP |
| depends on CONSOLE_NE2K |
| string "IP address of coreboot system" |
| default "10.0.1.253" |
| help |
| This is the IP of the coreboot system |
| |
| config CONSOLE_NE2K_IO_PORT |
| depends on CONSOLE_NE2K |
| hex "NE2000 adapter fixed IO port address" |
| default 0xe00 |
| help |
| This is the IO port address for the IO port |
| on the card, please select some non-conflicting region, |
| 32 bytes of IO spaces will be used (and align on 32 bytes |
| boundary, qemu needs broader align) |
| |
| |
| choice |
| prompt "Maximum console log level" |
| default MAXIMUM_CONSOLE_LOGLEVEL_8 |
| |
| config MAXIMUM_CONSOLE_LOGLEVEL_8 |
| bool "8: SPEW" |
| help |
| Way too many details. |
| config MAXIMUM_CONSOLE_LOGLEVEL_7 |
| bool "7: DEBUG" |
| help |
| Debug-level messages. |
| config MAXIMUM_CONSOLE_LOGLEVEL_6 |
| bool "6: INFO" |
| help |
| Informational messages. |
| config MAXIMUM_CONSOLE_LOGLEVEL_5 |
| bool "5: NOTICE" |
| help |
| Normal but significant conditions. |
| config MAXIMUM_CONSOLE_LOGLEVEL_4 |
| bool "4: WARNING" |
| help |
| Warning conditions. |
| config MAXIMUM_CONSOLE_LOGLEVEL_3 |
| bool "3: ERR" |
| help |
| Error conditions. |
| config MAXIMUM_CONSOLE_LOGLEVEL_2 |
| bool "2: CRIT" |
| help |
| Critical conditions. |
| config MAXIMUM_CONSOLE_LOGLEVEL_1 |
| bool "1: ALERT" |
| help |
| Action must be taken immediately. |
| config MAXIMUM_CONSOLE_LOGLEVEL_0 |
| bool "0: EMERG" |
| help |
| System is unusable. |
| |
| endchoice |
| |
| config MAXIMUM_CONSOLE_LOGLEVEL |
| int |
| default 0 if MAXIMUM_CONSOLE_LOGLEVEL_0 |
| default 1 if MAXIMUM_CONSOLE_LOGLEVEL_1 |
| default 2 if MAXIMUM_CONSOLE_LOGLEVEL_2 |
| default 3 if MAXIMUM_CONSOLE_LOGLEVEL_3 |
| default 4 if MAXIMUM_CONSOLE_LOGLEVEL_4 |
| default 5 if MAXIMUM_CONSOLE_LOGLEVEL_5 |
| default 6 if MAXIMUM_CONSOLE_LOGLEVEL_6 |
| default 7 if MAXIMUM_CONSOLE_LOGLEVEL_7 |
| default 8 if MAXIMUM_CONSOLE_LOGLEVEL_8 |
| help |
| Map the log level config names to an integer. |
| |
| choice |
| prompt "Default console log level" |
| default DEFAULT_CONSOLE_LOGLEVEL_8 |
| |
| config DEFAULT_CONSOLE_LOGLEVEL_8 |
| bool "8: SPEW" |
| depends on (MAXIMUM_CONSOLE_LOGLEVEL_8) |
| help |
| Way too many details. |
| config DEFAULT_CONSOLE_LOGLEVEL_7 |
| bool "7: DEBUG" |
| depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7) |
| help |
| Debug-level messages. |
| config DEFAULT_CONSOLE_LOGLEVEL_6 |
| bool "6: INFO" |
| depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_6) |
| help |
| Informational messages. |
| config DEFAULT_CONSOLE_LOGLEVEL_5 |
| bool "5: NOTICE" |
| depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5) |
| help |
| Normal but significant conditions. |
| config DEFAULT_CONSOLE_LOGLEVEL_4 |
| bool "4: WARNING" |
| depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_4) |
| help |
| Warning conditions. |
| config DEFAULT_CONSOLE_LOGLEVEL_3 |
| bool "3: ERR" |
| depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_4 || MAXIMUM_CONSOLE_LOGLEVEL_3) |
| help |
| Error conditions. |
| config DEFAULT_CONSOLE_LOGLEVEL_2 |
| bool "2: CRIT" |
| depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_4 || MAXIMUM_CONSOLE_LOGLEVEL_3 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_2) |
| help |
| Critical conditions. |
| config DEFAULT_CONSOLE_LOGLEVEL_1 |
| bool "1: ALERT" |
| depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_4 || MAXIMUM_CONSOLE_LOGLEVEL_3 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_2 || MAXIMUM_CONSOLE_LOGLEVEL_1) |
| help |
| Action must be taken immediately. |
| config DEFAULT_CONSOLE_LOGLEVEL_0 |
| bool "0: EMERG" |
| help |
| System is unusable. |
| |
| endchoice |
| |
| config DEFAULT_CONSOLE_LOGLEVEL |
| int |
| default 0 if DEFAULT_CONSOLE_LOGLEVEL_0 |
| default 1 if DEFAULT_CONSOLE_LOGLEVEL_1 |
| default 2 if DEFAULT_CONSOLE_LOGLEVEL_2 |
| default 3 if DEFAULT_CONSOLE_LOGLEVEL_3 |
| default 4 if DEFAULT_CONSOLE_LOGLEVEL_4 |
| default 5 if DEFAULT_CONSOLE_LOGLEVEL_5 |
| default 6 if DEFAULT_CONSOLE_LOGLEVEL_6 |
| default 7 if DEFAULT_CONSOLE_LOGLEVEL_7 |
| default 8 if DEFAULT_CONSOLE_LOGLEVEL_8 |
| help |
| Map the log level config names to an integer. |
| |
| config CONSOLE_LOGBUF |
| bool |
| default n |
| |
| config NO_POST |
| bool "Don't show any POST codes" |
| default n |
| |
| config CONSOLE_POST |
| bool "Show POST codes on the debug console" |
| depends on !NO_POST |
| default n |
| help |
| If enabled, coreboot will additionally print POST codes (which are |
| usually displayed using a so-called "POST card" ISA/PCI/PCI-E |
| device) on the debug console. |
| |
| endmenu |
| |