src/mainboard/asus/p3b-f/romstage.c

/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 */

#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <arch/hlt.h>
#include <stdlib.h>
#include <console/console.h>
#include "lib/ramtest.c"
#include "southbridge/intel/i82371eb/i82371eb_enable_rom.c"
#include "southbridge/intel/i82371eb/i82371eb_early_smbus.c"
#include "southbridge/intel/i82371eb/i82371eb_early_pm.c"
#include "northbridge/intel/i440bx/raminit.h"
#include "lib/debug.c"
#include "pc80/udelay_io.c"
#include "lib/delay.c"
#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
/* FIXME: The ASUS P3B-F has a Winbond W83977EF, actually. */
#include "superio/winbond/w83977tf/w83977tf_early_serial.c"

/* FIXME: The ASUS P3B-F has a Winbond W83977EF, actually. */
#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1)

static inline int spd_read_byte(unsigned int device, unsigned int address)
{
	return smbus_read_byte(device, address);
}

#include "northbridge/intel/i440bx/raminit.c"
#include "northbridge/intel/i440bx/debug.c"

/*
 * ASUS P3B-F specific SPD enable magic.
 *
 * Setting the byte at offset 0x37 in the PM I/O space to 0x6f will make the
 * board DIMMs accessible at SMBus/SPD offsets 0x50-0x53. Per default the SPD
 * offsets 0x50-0x53 are _not_ readable (all SPD reads will return 0xff) which
 * will make RAM init fail.
 *
 * Tested values for PM I/O offset 0x37:
 * 0x67: 11 00 111: Only SMBus/I2C offsets 0x48/0x49/0x2d accessible
 * 0x6f: 11 01 111: Only SMBus/I2C offsets 0x50-0x53 (SPD) accessible
 * 0x77: 11 10 111: Only SMBus/I2C offset 0x69 accessible
 *
 * PM I/O space offset 0x37 is GPOREG[31:24], i.e. it controls the GPIOs
 * 24-30 of the PIIX4E (bit 31 is reserved). Thus, GPIOs 27 and 28
 * control which SMBus/I2C offsets can be accessed.
 */
static void enable_spd(void)
{
	outb(0x6f, PM_IO_BASE + 0x37);
}

/*
 * Disable SPD access after RAM init to allow access to SMBus/I2C offsets
 * 0x48/0x49/0x2d, which is required e.g. by lm-sensors.
 */
static void disable_spd(void)
{
	outb(0x67, PM_IO_BASE + 0x37);
}

static void main(unsigned long bist)
{
	if (bist == 0)
		early_mtrr_init();

	/* FIXME: The ASUS P3B-F has a Winbond W83977EF, actually. */
	w83977tf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
	uart_init();
	console_init();
	report_bist_failure(bist);

	/* Enable access to the full ROM chip, needed very early by CBFS. */
	i82371eb_enable_rom(PCI_DEV(0, 4, 0)); /* ISA bridge is 00:04.0. */

	enable_smbus();
	enable_pm();

	enable_spd();

	/* dump_spd_registers(); */
	sdram_set_registers();
	sdram_set_spd_registers();
	sdram_enable();
	/* ram_check(0, 640 * 1024); */

	disable_spd();
}