| chip soc/intel/skylake |
| |
| # Enable deep Sx states |
| register "deep_s3_enable" = "1" |
| register "deep_s5_enable" = "1" |
| register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" |
| |
| # GPE configuration |
| # Note that GPE events called out in ASL code rely on this |
| # route. i.e. If this route changes then the affected GPE |
| # offset bits also need to be changed. |
| register "gpe0_dw0" = "GPP_C" |
| register "gpe0_dw1" = "GPP_D" |
| register "gpe0_dw2" = "GPP_E" |
| |
| # EC host command range is in 0x800-0x8ff |
| register "gen1_dec" = "0x00fc0801" |
| |
| # Enable DPTF |
| register "dptf_enable" = "1" |
| |
| # FSP Configuration |
| register "ProbelessTrace" = "0" |
| register "EnableLan" = "0" |
| register "EnableSata" = "0" |
| register "SataSalpSupport" = "0" |
| register "SataMode" = "0" |
| register "SataPortsEnable[0]" = "0" |
| register "EnableAzalia" = "1" |
| register "DspEnable" = "1" |
| register "IoBufferOwnership" = "3" |
| register "EnableTraceHub" = "0" |
| register "XdciEnable" = "0" |
| register "SsicPortEnable" = "0" |
| register "SmbusEnable" = "1" |
| register "Cio2Enable" = "0" |
| register "ScsEmmcEnabled" = "1" |
| register "ScsEmmcHs400Enabled" = "1" |
| register "ScsSdCardEnabled" = "2" |
| register "IshEnable" = "0" |
| register "PttSwitch" = "0" |
| register "InternalGfx" = "1" |
| register "SkipExtGfxScan" = "1" |
| register "Device4Enable" = "1" |
| |
| # Enable Root port 1 and 5. |
| register "PcieRpEnable[0]" = "1" |
| register "PcieRpEnable[4]" = "1" |
| # Enable CLKREQ# |
| register "PcieRpClkReqSupport[0]" = "1" |
| register "PcieRpClkReqSupport[4]" = "1" |
| # RP 1 uses SRCCLKREQ1# while RP 5 uses SRCCLKREQ2# |
| register "PcieRpClkReqNumber[0]" = "1" |
| register "PcieRpClkReqNumber[4]" = "2" |
| |
| register "PortUsb20Enable[0]" = "1" # Type-C Port 1 |
| register "PortUsb20Enable[1]" = "1" # Type-C Port 2 |
| register "PortUsb20Enable[2]" = "1" # Bluetooth |
| register "PortUsb20Enable[4]" = "1" # Type-A Port 1 |
| register "PortUsb20Enable[6]" = "1" # Camera |
| register "PortUsb20Enable[8]" = "1" # Type-A Port 2 |
| |
| register "PortUsb30Enable[0]" = "1" # Type-C Port 1 |
| register "PortUsb30Enable[1]" = "1" # Type-C Port 2 |
| register "PortUsb30Enable[2]" = "1" # Type-A Port 1 |
| register "PortUsb30Enable[3]" = "1" # Type-A Port 2 |
| |
| # Must leave UART0 enabled or SD/eMMC will not work as PCI |
| register "SerialIoDevMode" = "{ \ |
| [PchSerialIoIndexI2C0] = PchSerialIoPci, \ |
| [PchSerialIoIndexI2C1] = PchSerialIoPci, \ |
| [PchSerialIoIndexI2C2] = PchSerialIoDisabled, \ |
| [PchSerialIoIndexI2C3] = PchSerialIoDisabled, \ |
| [PchSerialIoIndexI2C4] = PchSerialIoPci, \ |
| [PchSerialIoIndexI2C5] = PchSerialIoDisabled, \ |
| [PchSerialIoIndexSpi0] = PchSerialIoDisabled, \ |
| [PchSerialIoIndexSpi1] = PchSerialIoDisabled, \ |
| [PchSerialIoIndexUart0] = PchSerialIoPci, \ |
| [PchSerialIoIndexUart1] = PchSerialIoDisabled, \ |
| [PchSerialIoIndexUart2] = PchSerialIoPci, \ |
| }" |
| |
| device cpu_cluster 0 on |
| device lapic 0 on end |
| end |
| device domain 0 on |
| device pci 00.0 on end # Host Bridge |
| device pci 02.0 on end # Integrated Graphics Device |
| device pci 14.0 on end # USB xHCI |
| device pci 14.1 off end # USB xDCI (OTG) |
| device pci 14.2 on end # Thermal Subsystem |
| device pci 15.0 on end # I2C #0 |
| device pci 15.1 on end # I2C #1 |
| device pci 15.2 off end # I2C #2 |
| device pci 15.3 off end # I2C #3 |
| device pci 16.0 on end # Management Engine Interface 1 |
| device pci 16.1 off end # Management Engine Interface 2 |
| device pci 16.2 off end # Management Engine IDE-R |
| device pci 16.3 off end # Management Engine KT Redirection |
| device pci 16.4 off end # Management Engine Interface 3 |
| device pci 17.0 off end # SATA |
| device pci 19.0 on end # UART #2 |
| device pci 19.1 off end # I2C #5 |
| device pci 19.2 on end # I2C #4 |
| device pci 1c.0 on end # PCI Express Port 1 |
| device pci 1c.1 off end # PCI Express Port 2 |
| device pci 1c.2 off end # PCI Express Port 3 |
| device pci 1c.3 off end # PCI Express Port 4 |
| device pci 1c.4 on end # PCI Express Port 5 |
| device pci 1c.5 off end # PCI Express Port 6 |
| device pci 1c.6 off end # PCI Express Port 7 |
| device pci 1c.7 off end # PCI Express Port 8 |
| device pci 1d.0 off end # PCI Express Port 9 |
| device pci 1d.1 off end # PCI Express Port 10 |
| device pci 1d.2 off end # PCI Express Port 11 |
| device pci 1d.3 off end # PCI Express Port 12 |
| device pci 1e.0 on end # UART #0 |
| device pci 1e.1 off end # UART #1 |
| device pci 1e.2 off end # GSPI #0 |
| device pci 1e.3 off end # GSPI #1 |
| device pci 1e.4 on end # eMMC |
| device pci 1e.5 off end # SDIO |
| device pci 1e.6 on end # SDCard |
| device pci 1f.0 on |
| chip drivers/pc80/tpm |
| device pnp 0c31.0 on end |
| end |
| chip ec/google/chromeec |
| device pnp 0c09.0 on end |
| end |
| end # LPC Interface |
| device pci 1f.2 on end # Power Management Controller |
| device pci 1f.3 on end # Intel HDA |
| device pci 1f.4 on end # SMBus |
| device pci 1f.5 on end # PCH SPI |
| device pci 1f.6 off end # GbE |
| end |
| end |