| /** @file |
| |
| Copyright (c) 2020, Intel Corporation. All rights reserved.<BR> |
| |
| Redistribution and use in source and binary forms, with or without modification, |
| are permitted provided that the following conditions are met: |
| |
| * Redistributions of source code must retain the above copyright notice, this |
| list of conditions and the following disclaimer. |
| * Redistributions in binary form must reproduce the above copyright notice, this |
| list of conditions and the following disclaimer in the documentation and/or |
| other materials provided with the distribution. |
| * Neither the name of Intel Corporation nor the names of its contributors may |
| be used to endorse or promote products derived from this software without |
| specific prior written permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF |
| THE POSSIBILITY OF SUCH DAMAGE. |
| |
| This file is automatically generated. Please do NOT modify !!! |
| |
| **/ |
| |
| #ifndef __FSPMUPD_H__ |
| #define __FSPMUPD_H__ |
| |
| #include <FspUpd.h> |
| |
| #pragma pack(1) |
| |
| |
| #include <MemInfoHob.h> |
| |
| /// |
| /// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. |
| /// |
| typedef struct { |
| UINT8 Revision; ///< Chipset Init Info Revision |
| UINT8 Rsvd[3]; ///< Reserved |
| UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table |
| UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table |
| } CHIPSET_INIT_INFO; |
| |
| |
| /** Fsp M Configuration |
| **/ |
| typedef struct { |
| |
| /** Offset 0x0040 - Platform Reserved Memory Size |
| The minimum platform memory size required to pass control into DXE |
| **/ |
| UINT64 PlatformMemorySize; |
| |
| /** Offset 0x0048 - SPD Data Length |
| Length of SPD Data |
| 0x100:256 Bytes, 0x200:512 Bytes |
| **/ |
| UINT16 MemorySpdDataLen; |
| |
| /** Offset 0x004A - Enable above 4GB MMIO resource support |
| Enable/disable above 4GB MMIO resource support |
| $EN_DIS |
| **/ |
| UINT8 EnableAbove4GBMmio; |
| |
| /** Offset 0x004B - Enable/Disable CrashLog Device 10 |
| Enable(Default): Enable CPU CrashLog Device 10, Disable: Disable CPU CrashLog |
| $EN_DIS |
| **/ |
| UINT8 CpuCrashLogDevice; |
| |
| /** Offset 0x004C - Memory SPD Pointer Channel 0 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr00; |
| |
| /** Offset 0x0050 - Memory SPD Pointer Channel 0 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr01; |
| |
| /** Offset 0x0054 - Memory SPD Pointer Channel 1 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr10; |
| |
| /** Offset 0x0058 - Memory SPD Pointer Channel 1 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr11; |
| |
| /** Offset 0x005C - Dq Byte Map CH0 |
| Dq byte mapping between CPU and DRAM, Channel 0: board-dependent |
| **/ |
| UINT8 DqByteMapCh0[12]; |
| |
| /** Offset 0x0068 - Dq Byte Map CH1 |
| Dq byte mapping between CPU and DRAM, Channel 1: board-dependent |
| **/ |
| UINT8 DqByteMapCh1[12]; |
| |
| /** Offset 0x0074 - Dqs Map CPU to DRAM CH 0 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramCh0[8]; |
| |
| /** Offset 0x007C - Dqs Map CPU to DRAM CH 1 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramCh1[8]; |
| |
| /** Offset 0x0084 - RcompResister settings |
| Indicates RcompReister settings: Board-dependent |
| **/ |
| UINT16 RcompResistor[3]; |
| |
| /** Offset 0x008A - RcompTarget settings |
| RcompTarget settings: board-dependent |
| **/ |
| UINT16 RcompTarget[5]; |
| |
| /** Offset 0x0094 - VREF_CA |
| CA Vref routing: board-dependent |
| 0:VREF_CA goes to both CH_A and CH_B, 1: VREF_CA to CH_A and VREF_DQ_A to CH_B, |
| 2:VREF_CA to CH_A and VREF_DQ_B to CH_B |
| **/ |
| UINT8 CaVrefConfig; |
| |
| /** Offset 0x0095 - Smram Mask |
| The SMM Regions AB-SEG and/or H-SEG reserved |
| 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both |
| **/ |
| UINT8 SmramMask; |
| |
| /** Offset 0x0096 - Dqs Pins Interleaved Setting |
| Indicates DqPinsInterleaved setting: board-dependent |
| $EN_DIS |
| **/ |
| UINT8 DqPinsInterleaved; |
| |
| /** Offset 0x0097 - LPDDR4 Write DQ/DQS Retraining |
| Enables/Disable LPDDR4 Write DQ/DQS Retraining |
| $EN_DIS |
| **/ |
| UINT8 Lp4DqsOscEn; |
| |
| /** Offset 0x0098 - Ibecc |
| Enables/Disable Ibecc |
| $EN_DIS |
| **/ |
| UINT8 Ibecc; |
| |
| /** Offset 0x0099 - IbeccParity |
| In-Band ECC Parity Control |
| $EN_DIS |
| **/ |
| UINT8 IbeccParity; |
| |
| /** Offset 0x009A - IbeccOperationMode |
| In-Band ECC Operation Mode |
| 0:Protect base on address range, 1: Non-protected, 2: All protected |
| **/ |
| UINT8 IbeccOperationMode; |
| |
| /** Offset 0x009B - IbeccErrorInj Note: Modification accepts the disclaimer shown in the Help text |
| Disclaimer: Warning: This must NOT be enabled for production!!! Enabling Error Injection |
| allows attackers who have access to the Host Operating System to inject IBECC errors |
| that can cause unintended memory corruption and enable the leak of security data |
| in the BIOS stolen memory regions. |
| $EN_DIS |
| **/ |
| UINT8 IbeccErrorInj; |
| |
| /** Offset 0x009C - IbeccProtectedRegionEnable |
| In-Band ECC Protected Region Enable |
| $EN_DIS |
| **/ |
| UINT8 IbeccProtectedRegionEnable[8]; |
| |
| /** Offset 0x00A4 - IbeccProtectedRegionBases |
| IBECC Protected Region Bases |
| **/ |
| UINT16 IbeccProtectedRegionBase[8]; |
| |
| /** Offset 0x00B4 - IbeccProtectedRegionMasks |
| IBECC Protected Region Masks |
| **/ |
| UINT16 IbeccProtectedRegionMask[8]; |
| |
| /** Offset 0x00C4 - MrcTaskDebugPrintEnable |
| Mrc Task Debug Print Enable. 0(Default)=Disable, non-Zero=Enable Task Debug print |
| **/ |
| UINT8 MrcTaskDebugEnable; |
| |
| /** Offset 0x00C5 - Rank Margin Tool per Task |
| This option enables the user to execute Rank Margin Tool per major training step |
| in the MRC. |
| $EN_DIS |
| **/ |
| UINT8 RmtPerTask; |
| |
| /** Offset 0x00C6 - Training Trace |
| This option enables the trained state tracing feature in MRC. This feature will |
| print out the key training parameters state across major training steps. |
| $EN_DIS |
| **/ |
| UINT8 TrainTrace; |
| |
| /** Offset 0x00C7 |
| **/ |
| UINT8 UnusedUpdSpace0; |
| |
| /** Offset 0x00C8 - Intel Enhanced Debug |
| Intel Enhanced Debug (IED): 0=Disabled, 0x400000=Enabled and 4MB SMRAM occupied |
| 0 : Disable, 0x400000 : Enable |
| **/ |
| UINT32 IedSize; |
| |
| /** Offset 0x00CC - Tseg Size |
| Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build |
| 0x0400000:4MB, 0x01000000:16MB |
| **/ |
| UINT32 TsegSize; |
| |
| /** Offset 0x00D0 - MMIO Size |
| Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB |
| **/ |
| UINT16 MmioSize; |
| |
| /** Offset 0x00D2 - LowSupplyEnData |
| Enable: Enable Low Supply for LPDDR4 Data, Disable(Default) |
| $EN_DIS |
| **/ |
| UINT8 LowSupplyEnData; |
| |
| /** Offset 0x00D3 - LowSupplyEnCcc |
| Enable: Enable Low Supply for LPDDR4 Clock/Command/Control, Disable(Default) |
| $EN_DIS |
| **/ |
| UINT8 LowSupplyEnCcc; |
| |
| /** Offset 0x00D4 - Memory Test on Warm Boot |
| Run Base Memory Test on Warm Boot |
| 0:Disable, 1:Enable |
| **/ |
| UINT8 MemTestOnWarmBoot; |
| |
| /** Offset 0x00D5 - Probeless Trace |
| Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB. |
| This also requires IED to be enabled. |
| $EN_DIS |
| **/ |
| UINT8 ProbelessTrace; |
| |
| /** Offset 0x00D6 - Enable SMBus |
| Enable/disable SMBus controller. |
| $EN_DIS |
| **/ |
| UINT8 SmbusEnable; |
| |
| /** Offset 0x00D7 - Spd Address Tabl |
| Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used |
| if SPD Address is 00 |
| **/ |
| UINT8 SpdAddressTable[4]; |
| |
| /** Offset 0x00DB - Platform Debug Consent |
| To 'opt-in' for debug, please select 'Enabled' with the desired debug probe type. |
| Enabling this BIOS option may alter the default value of other debug-related BIOS |
| options.\Manual: Do not use Platform Debug Consent to override other debug-relevant |
| policies, but the user must set each debug option manually, aimed at advanced users.\n |
| Note: DCI OOB (aka BSSB) uses CCA probe;[DCI OOB+DbC] and [USB2 DbC] have the same setting. |
| 0:Disabled, 1:Enabled (DCI OOB+[DbC]), 2:Enabled (DCI OOB), 3:Enabled (USB3 DbC), |
| 4:Enabled (XDP/MIPI60), 5:Enabled (USB2 DbC), 6:Enable (2-wire DCI OOB), 7:Manual |
| **/ |
| UINT8 PlatformDebugConsent; |
| |
| /** Offset 0x00DC - DCI Enable |
| Determine if to enable DCI debug from host |
| $EN_DIS |
| **/ |
| UINT8 DciEn; |
| |
| /** Offset 0x00DD - DCI DbC Mode |
| Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both: |
| Set both USB2/3DBCEN; No Change: Comply with HW value |
| 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change |
| **/ |
| UINT8 DciDbcMode; |
| |
| /** Offset 0x00DE - Enable DCI ModPHY Pwoer Gate |
| Enable ModPHY Pwoer Gate when DCI is enabled |
| $EN_DIS |
| **/ |
| UINT8 DciModphyPg; |
| |
| /** Offset 0x00DF - USB3 Type-C UFP2DFP Kernel/Platform Debug Support |
| This BIOS option enables kernel and platform debug for USB3 interface over a UFP |
| Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting. |
| 0:Disabled, 1:Enabled, 2:No Change |
| **/ |
| UINT8 DciUsb3TypecUfpDbg; |
| |
| /** Offset 0x00E0 - PCH Trace Hub Mode |
| Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' |
| if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. |
| 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode |
| **/ |
| UINT8 PchTraceHubMode; |
| |
| /** Offset 0x00E1 - PCH Trace Hub Memory Region 0 buffer Size |
| Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB, |
| 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. |
| 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB |
| **/ |
| UINT8 PchTraceHubMemReg0Size; |
| |
| /** Offset 0x00E2 - PCH Trace Hub Memory Region 1 buffer Size |
| Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB, |
| 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. |
| 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB |
| **/ |
| UINT8 PchTraceHubMemReg1Size; |
| |
| /** Offset 0x00E3 - PchPreMemRsvd |
| Reserved for PCH Pre-Mem Reserved |
| $EN_DIS |
| **/ |
| UINT8 PchPreMemRsvd[7]; |
| |
| /** Offset 0x00EA - State of X2APIC_OPT_OUT bit in the DMAR table |
| 0=Disable/Clear, 1=Enable/Set |
| $EN_DIS |
| **/ |
| UINT8 X2ApicOptOut; |
| |
| /** Offset 0x00EB - State of DMA_CONTROL_GUARANTEE bit in the DMAR table |
| 0=Disable/Clear, 1=Enable/Set |
| $EN_DIS |
| **/ |
| UINT8 DmaControlGuarantee; |
| |
| /** Offset 0x00EC - Base addresses for VT-d function MMIO access |
| Base addresses for VT-d MMIO access per VT-d engine |
| **/ |
| UINT32 VtdBaseAddress[9]; |
| |
| /** Offset 0x0110 - Disable VT-d |
| 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) |
| $EN_DIS |
| **/ |
| UINT8 VtdDisable; |
| |
| /** Offset 0x0111 - Vtd Programming for Igd |
| 1=Enable/TRUE (Igd VT-d Bar programming enabled), 0=Disable/FLASE (Igd VT-d Bar |
| programming disabled) |
| $EN_DIS |
| **/ |
| UINT8 VtdIgdEnable; |
| |
| /** Offset 0x0112 - Vtd Programming for Ipu |
| 1=Enable/TRUE (Ipu VT-d Bar programming enabled), 0=Disable/FLASE (Ipu VT-d Bar |
| programming disabled) |
| $EN_DIS |
| **/ |
| UINT8 VtdIpuEnable; |
| |
| /** Offset 0x0113 - Vtd Programming for Iop |
| 1=Enable/TRUE (Iop VT-d Bar programming enabled), 0=Disable/FLASE (Iop VT-d Bar |
| programming disabled) |
| $EN_DIS |
| **/ |
| UINT8 VtdIopEnable; |
| |
| /** Offset 0x0114 - Vtd Programming for ITbt |
| 1=Enable/TRUE (ITbt VT-d Bar programming enabled), 0=Disable/FLASE (ITbt VT-d Bar |
| programming disabled) |
| $EN_DIS |
| **/ |
| UINT8 VtdItbtEnable; |
| |
| /** Offset 0x0115 - Disable Te Igd |
| 0=Enable/FALSE(Te Igd enabled), 1=Disable/TRUE (Te Igd disabled) |
| $EN_DIS |
| **/ |
| UINT8 DisableTeIgd; |
| |
| /** Offset 0x0116 - Internal Graphics Pre-allocated Memory |
| Size of memory preallocated for internal graphics. |
| 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0x05:160MB, 0xF0:4MB, 0xF1:8MB, |
| 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB, |
| 0xFA:44MB, 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB |
| **/ |
| UINT8 IgdDvmt50PreAlloc; |
| |
| /** Offset 0x0117 - Internal Graphics |
| Enable/disable internal graphics. |
| $EN_DIS |
| **/ |
| UINT8 InternalGfx; |
| |
| /** Offset 0x0118 - Aperture Size |
| Select the Aperture Size. |
| 0:128 MB, 1:256 MB, 2:512 MB |
| **/ |
| UINT8 ApertureSize; |
| |
| /** Offset 0x0119 - Board Type |
| MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile |
| Halo, 7=UP Server |
| 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server |
| **/ |
| UINT8 UserBd; |
| |
| /** Offset 0x011A - DDR Frequency Limit |
| Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, |
| 2133, 2400, 2667, 2933 and 0 for Auto. |
| 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto |
| **/ |
| UINT16 DdrFreqLimit; |
| |
| /** Offset 0x011C - SA GV |
| System Agent dynamic frequency support and when enabled memory will be training |
| at three different frequencies. |
| 0:Disabled, 1:FixedLow, 2:FixedMid, 3:FixedHigh, 4:Enabled |
| **/ |
| UINT8 SaGv; |
| |
| /** Offset 0x011D - DDR Speed Control |
| DDR Frequency and Gear control for all SAGV points. |
| 0:Auto, 1:Manual |
| **/ |
| UINT8 DdrSpeedControl; |
| |
| /** Offset 0x011E - Low Frequency |
| SAGV Low Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133, |
| 2400, 2667, 2933 and 0 for Auto. |
| 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto |
| **/ |
| UINT16 FreqSaGvLow; |
| |
| /** Offset 0x0120 - Mid Frequency |
| SAGV Mid Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133, |
| 2400, 2667, 2933 and 0 for Auto. |
| 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto |
| **/ |
| UINT16 FreqSaGvMid; |
| |
| /** Offset 0x0122 - Channel A DIMM Control |
| Channel A DIMM Control Support - Enable or Disable Dimms on Channel A. |
| 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs |
| **/ |
| UINT8 DisableDimmChannel0; |
| |
| /** Offset 0x0123 - Channel B DIMM Control |
| Channel B DIMM Control Support - Enable or Disable Dimms on Channel B. |
| 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs |
| **/ |
| UINT8 DisableDimmChannel1; |
| |
| /** Offset 0x0124 - Scrambler Support |
| This option enables data scrambling in memory. |
| $EN_DIS |
| **/ |
| UINT8 ScramblerSupport; |
| |
| /** Offset 0x0125 - Ddr4OneDpc |
| DDR4 1DPC performance feature for 2R DIMMs. Can be enabled on DIMM0 or DIMM1 only, |
| or on both (default) |
| 0: Disabled, 1: Enabled on DIMM0 only, 2: Enabled on DIMM1 only, 3: Enabled |
| **/ |
| UINT8 Ddr4OneDpc; |
| |
| /** Offset 0x0126 |
| **/ |
| UINT8 UnusedUpdSpace1[2]; |
| |
| /** Offset 0x0128 - MMA Test Content Pointer |
| Pointer to MMA Test Content in Memory |
| **/ |
| UINT32 MmaTestContentPtr; |
| |
| /** Offset 0x012C - MMA Test Content Size |
| Size of MMA Test Content in Memory |
| **/ |
| UINT32 MmaTestContentSize; |
| |
| /** Offset 0x0130 - MMA Test Config Pointer |
| Pointer to MMA Test Config in Memory |
| **/ |
| UINT32 MmaTestConfigPtr; |
| |
| /** Offset 0x0134 - MMA Test Config Size |
| Size of MMA Test Config in Memory |
| **/ |
| UINT32 MmaTestConfigSize; |
| |
| /** Offset 0x0138 - SPD Profile Selected |
| Select DIMM timing profile. Options are 0=Default profile, 1=Custom profile, 2=XMP |
| Profile 1, 3=XMP Profile 2 |
| 0:Default profile, 1:Custom profile, 2:XMP profile 1, 3:XMP profile 2 |
| **/ |
| UINT8 SpdProfileSelected; |
| |
| /** Offset 0x0139 |
| **/ |
| UINT8 UnusedUpdSpace2; |
| |
| /** Offset 0x013A - Memory Voltage |
| Memory Voltage Override (Vddq). Default = no override |
| 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40 |
| Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts |
| **/ |
| UINT16 VddVoltage; |
| |
| /** Offset 0x013C - Memory Reference Clock |
| 100MHz, 133MHz. |
| 0:133MHz, 1:100MHz |
| **/ |
| UINT8 RefClk; |
| |
| /** Offset 0x013D - Memory Ratio |
| Automatic or the frequency will equal ratio times reference clock. Set to Auto to |
| recalculate memory timings listed below. |
| 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 |
| **/ |
| UINT8 Ratio; |
| |
| /** Offset 0x013E - tCL |
| CAS Latency, 0: AUTO, max: 31 |
| **/ |
| UINT8 tCL; |
| |
| /** Offset 0x013F - tCWL |
| Min CAS Write Latency Delay Time, 0: AUTO, max: 34 |
| **/ |
| UINT8 tCWL; |
| |
| /** Offset 0x0140 - tFAW |
| Min Four Activate Window Delay Time, 0: AUTO, max: 63 |
| **/ |
| UINT16 tFAW; |
| |
| /** Offset 0x0142 - tRAS |
| RAS Active Time, 0: AUTO, max: 64 |
| **/ |
| UINT16 tRAS; |
| |
| /** Offset 0x0144 - tRCD/tRP |
| RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63 |
| **/ |
| UINT8 tRCDtRP; |
| |
| /** Offset 0x0145 |
| **/ |
| UINT8 UnusedUpdSpace3; |
| |
| /** Offset 0x0146 - tREFI |
| Refresh Interval, 0: AUTO, max: 65535 |
| **/ |
| UINT16 tREFI; |
| |
| /** Offset 0x0148 - tRFC |
| Min Refresh Recovery Delay Time, 0: AUTO, max: 1023 |
| **/ |
| UINT16 tRFC; |
| |
| /** Offset 0x014A - tRRD |
| Min Row Active to Row Active Delay Time, 0: AUTO, max: 15 |
| **/ |
| UINT8 tRRD; |
| |
| /** Offset 0x014B - tRTP |
| Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal |
| values: 5, 6, 7, 8, 9, 10, 12 |
| **/ |
| UINT8 tRTP; |
| |
| /** Offset 0x014C - tWR |
| Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, |
| 20, 24, 30, 34, 40 |
| 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30, |
| 34:34, 40:40 |
| **/ |
| UINT8 tWR; |
| |
| /** Offset 0x014D - tWTR |
| Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28 |
| **/ |
| UINT8 tWTR; |
| |
| /** Offset 0x014E - NMode |
| System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N |
| **/ |
| UINT8 NModeSupport; |
| |
| /** Offset 0x014F - DllBwEn[0] |
| DllBwEn[0], for 1067 (0..7) |
| **/ |
| UINT8 DllBwEn0; |
| |
| /** Offset 0x0150 - DllBwEn[1] |
| DllBwEn[1], for 1333 (0..7) |
| **/ |
| UINT8 DllBwEn1; |
| |
| /** Offset 0x0151 - DllBwEn[2] |
| DllBwEn[2], for 1600 (0..7) |
| **/ |
| UINT8 DllBwEn2; |
| |
| /** Offset 0x0152 - DllBwEn[3] |
| DllBwEn[3], for 1867 and up (0..7) |
| **/ |
| UINT8 DllBwEn3; |
| |
| /** Offset 0x0153 - ISVT IO Port Address |
| ISVT IO Port Address. 0=Minimal, 0xFF=Maximum, 0x99=Default |
| **/ |
| UINT8 IsvtIoPort; |
| |
| /** Offset 0x0154 - Enable Intel HD Audio (Azalia) |
| 0: Disable, 1: Enable (Default) Azalia controller |
| $EN_DIS |
| **/ |
| UINT8 PchHdaEnable; |
| |
| /** Offset 0x0155 - Enable PSE Controller |
| 0: Disable; 1: Enable (Default) PSE controller |
| $EN_DIS |
| **/ |
| UINT8 PchPseEnable; |
| |
| /** Offset 0x0156 - CPU Trace Hub Mode |
| Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' |
| if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. |
| 0: Disable, 1:Target Debugger Mode, 2:Host Debugger Mode |
| **/ |
| UINT8 CpuTraceHubMode; |
| |
| /** Offset 0x0157 - CPU Trace Hub Memory Region 0 |
| CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, |
| 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. |
| 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB |
| **/ |
| UINT8 CpuTraceHubMemReg0Size; |
| |
| /** Offset 0x0158 - CPU Trace Hub Memory Region 1 |
| CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, |
| 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. |
| 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB |
| **/ |
| UINT8 CpuTraceHubMemReg1Size; |
| |
| /** Offset 0x0159 - SA GV Low Gear |
| Gear Selection for SAGV Low point |
| 0:Gear1, 1:Gear2 |
| **/ |
| UINT8 SaGvLowGear2; |
| |
| /** Offset 0x015A - SA GV Mid Gear |
| Gear Selection for SAGV Mid point |
| 0:Gear1, 1:Gear2 |
| **/ |
| UINT8 SaGvMidGear2; |
| |
| /** Offset 0x015B - SA GV High Gear |
| Gear Selection for SAGV High point, or when SAGV is disabled |
| 0:Gear1, 1:Gear2 |
| **/ |
| UINT8 SaGvHighGear2; |
| |
| /** Offset 0x015C - HECI Timeouts |
| 0: Disable, 1: Enable (Default) timeout check for HECI |
| $EN_DIS |
| **/ |
| UINT8 HeciTimeouts; |
| |
| /** Offset 0x015D |
| **/ |
| UINT8 UnusedUpdSpace4[3]; |
| |
| /** Offset 0x0160 - HECI1 BAR address |
| BAR address of HECI1 |
| **/ |
| UINT32 Heci1BarAddress; |
| |
| /** Offset 0x0164 - HECI2 BAR address |
| BAR address of HECI2 |
| **/ |
| UINT32 Heci2BarAddress; |
| |
| /** Offset 0x0168 - HECI3 BAR address |
| BAR address of HECI3 |
| **/ |
| UINT32 Heci3BarAddress; |
| |
| /** Offset 0x016C - HG dGPU Power Delay |
| HG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is |
| 300=300 microseconds |
| **/ |
| UINT16 HgDelayAfterPwrEn; |
| |
| /** Offset 0x016E - HG dGPU Reset Delay |
| HG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100 |
| microseconds |
| **/ |
| UINT16 HgDelayAfterHoldReset; |
| |
| /** Offset 0x0170 - MMIO size adjustment for AUTO mode |
| Positive number means increasing MMIO size, Negative value means decreasing MMIO |
| size: 0 (Default)=no change to AUTO mode MMIO size |
| **/ |
| UINT16 MmioSizeAdjustment; |
| |
| /** Offset 0x0172 - PCIe ASPM programming will happen in relation to the Oprom |
| Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default): |
| Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after |
| Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume |
| 0:Before, 1:After |
| **/ |
| UINT8 InitPcieAspmAfterOprom; |
| |
| /** Offset 0x0173 - Selection of the primary display device |
| 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Hybrid Graphics |
| 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Hybrid Graphics |
| **/ |
| UINT8 PrimaryDisplay; |
| |
| /** Offset 0x0174 - Selection of PSMI Region size |
| 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0 |
| 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB |
| **/ |
| UINT8 PsmiRegionSize; |
| |
| /** Offset 0x0175 |
| **/ |
| UINT8 UnusedUpdSpace5[3]; |
| |
| /** Offset 0x0178 - Temporary MMIO address for GMADR |
| The reference code will use this as Temporary MMIO address space to access GMADR |
| Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to |
| (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress |
| - 0x1) (Where ApertureSize = 256MB) |
| **/ |
| UINT32 GmAdr; |
| |
| /** Offset 0x017C - Temporary MMIO address for GTTMMADR |
| The reference code will use this as Temporary MMIO address space to access GTTMMADR |
| Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr |
| to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO |
| + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB) |
| **/ |
| UINT32 GttMmAdr; |
| |
| /** Offset 0x0180 - Selection of iGFX GTT Memory size |
| 1=2MB, 2=4MB, 3=8MB, Default is 3 |
| 1:2MB, 2:4MB, 3:8MB |
| **/ |
| UINT16 GttSize; |
| |
| /** Offset 0x0182 - Hybrid Graphics GPIO information for PEG 0 |
| Hybrid Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs |
| **/ |
| UINT8 CpuPcie0Rtd3Gpio[24]; |
| |
| /** Offset 0x019A - Enable/Disable MRC TXT dependency |
| When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default): |
| MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization |
| $EN_DIS |
| **/ |
| UINT8 TxtImplemented; |
| |
| /** Offset 0x019B - Enable/Disable SA OcSupport |
| Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport |
| $EN_DIS |
| **/ |
| UINT8 SaOcSupport; |
| |
| /** Offset 0x019C - GT slice Voltage Mode |
| 0(Default): Adaptive, 1: Override |
| 0: Adaptive, 1: Override |
| **/ |
| UINT8 GtVoltageMode; |
| |
| /** Offset 0x019D - Maximum GTs turbo ratio override |
| 0(Default)=Minimal/Auto, 60=Maximum |
| **/ |
| UINT8 GtMaxOcRatio; |
| |
| /** Offset 0x019E - The voltage offset applied to GT slice |
| 0(Default)=Minimal, 1000=Maximum |
| **/ |
| UINT16 GtVoltageOffset; |
| |
| /** Offset 0x01A0 - The GT slice voltage override which is applied to the entire range of GT frequencies |
| 0(Default)=Minimal, 2000=Maximum |
| **/ |
| UINT16 GtVoltageOverride; |
| |
| /** Offset 0x01A2 - adaptive voltage applied during turbo frequencies |
| 0(Default)=Minimal, 2000=Maximum |
| **/ |
| UINT16 GtExtraTurboVoltage; |
| |
| /** Offset 0x01A4 - voltage offset applied to the SA |
| 0(Default)=Minimal, 1000=Maximum |
| **/ |
| UINT16 SaVoltageOffset; |
| |
| /** Offset 0x01A6 - PCIe root port Function number for Hybrid Graphics dGPU |
| Root port Index number to indicate which PCIe root port has dGPU |
| **/ |
| UINT8 RootPortIndex; |
| |
| /** Offset 0x01A7 - Realtime Memory Timing |
| 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform |
| realtime memory timing changes after MRC_DONE. |
| 0: Disabled, 1: Enabled |
| **/ |
| UINT8 RealtimeMemoryTiming; |
| |
| /** Offset 0x01A8 - This is policy to control iTBT PCIe Multiple Segment setting. |
| When Disabled all the TBT PCIe RP are located at Segment0, When Enabled all the |
| TBT PCIe RP are located at Segment1. <b>0: Disable</b>; 1: Enable. |
| $EN_DIS |
| **/ |
| UINT8 PcieMultipleSegmentEnabled; |
| |
| /** Offset 0x01A9 - Enable/Disable SA IPU |
| Enable(Default): Enable SA IPU, Disable: Disable SA IPU |
| $EN_DIS |
| **/ |
| UINT8 SaIpuEnable; |
| |
| /** Offset 0x01AA - IPU IMR Configuration |
| 0:IPU Camera, 1:IPU Gen Default is 0 |
| 0:IPU Camera, 1:IPU Gen |
| **/ |
| UINT8 SaIpuImrConfiguration; |
| |
| /** Offset 0x01AB - IMGU CLKOUT Configuration |
| The configuration of IMGU CLKOUT, 0: Disable;<b>1: Enable</b>. |
| $EN_DIS |
| **/ |
| UINT8 ImguClkOutEn[5]; |
| |
| /** Offset 0x01B0 - IPU FUSA Configuration |
| 0:FUSA Disable, 1:FUSA Enable Default is 0 |
| 0:FUSA Disable, 1:FUSA Enable |
| **/ |
| UINT8 SaIpuFusaConfigEnable; |
| |
| /** Offset 0x01B1 |
| **/ |
| UINT8 UnusedUpdSpace6[3]; |
| |
| /** Offset 0x01B4 - Enable PCIE RP Mask |
| Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 |
| for port1, bit1 for port2, and so on. |
| **/ |
| UINT32 CpuPcieRpEnableMask; |
| |
| /** Offset 0x01B8 - Assertion on Link Down GPIOs |
| GPIO Assertion on Link Down. Disabled(0x0)(Default): Disable assertion on Link Down |
| GPIOs, Enabled(0x1): Enable assertion on Link Down GPIOs |
| 0:Disable, 1:Enable |
| **/ |
| UINT8 CpuPcieRpLinkDownGpios; |
| |
| /** Offset 0x01B9 - Enable ClockReq Messaging |
| ClockReq Messaging. Disabled(0x0): Disable ClockReq Messaging, Enabled(0x1)(Default): |
| Enable ClockReq Messaging |
| 0:Disable, 1:Enable |
| **/ |
| UINT8 CpuPcieRpClockReqMsgEnable; |
| |
| /** Offset 0x01BA - PCIE RP Pcie Speed |
| Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3; |
| 4: Gen4 (see: CPU_PCIE_SPEED). |
| **/ |
| UINT8 CpuPcieRpPcieSpeed[4]; |
| |
| /** Offset 0x01BE - Selection of PSMI Support On/Off |
| 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support |
| $EN_DIS |
| **/ |
| UINT8 GtPsmiSupport; |
| |
| /** Offset 0x01BF - Selection of DiSM Region Size |
| DiSM Size to be allocated for 2LM Sku Default is 0 |
| 0:0GB, 1:1GB, 2:2GB, 3:3GB, 4:4GB, 5:5GB, 6:6GB, 7:7GB |
| **/ |
| UINT8 DismSize; |
| |
| /** Offset 0x01C0 - Pram Size |
| Persisted Ram Size. Default is Disabled |
| 0x30:Disable, 0x31:4MB, 0x32:16MB, 0x33:64MB |
| **/ |
| UINT8 PramSize; |
| |
| /** Offset 0x01C1 - SaPreMemProductionRsvd |
| Reserved for SA Pre-Mem Production |
| $EN_DIS |
| **/ |
| UINT8 SaPreMemProductionRsvd[138]; |
| |
| /** Offset 0x024B - DMI Max Link Speed |
| Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 |
| Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed |
| 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 |
| **/ |
| UINT8 DmiMaxLinkSpeed; |
| |
| /** Offset 0x024C - DMI Equalization Phase 2 |
| DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): |
| AUTO - Use the current default method |
| 0:Disable phase2, 1:Enable phase2, 2:Auto |
| **/ |
| UINT8 DmiGen3EqPh2Enable; |
| |
| /** Offset 0x024D - DMI Gen3 Equalization Phase3 |
| DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, |
| HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software |
| Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static |
| EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just |
| Phase1), Disabled(0x4): Bypass Equalization Phase 3 |
| 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 |
| **/ |
| UINT8 DmiGen3EqPh3Method; |
| |
| /** Offset 0x024E - Enable/Disable DMI GEN3 Static EQ Phase1 programming |
| Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static |
| Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming |
| $EN_DIS |
| **/ |
| UINT8 DmiGen3ProgramStaticEq; |
| |
| /** Offset 0x024F - DeEmphasis control for DMI |
| DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB |
| 0: -6dB, 1: -3.5dB |
| **/ |
| UINT8 DmiDeEmphasis; |
| |
| /** Offset 0x0250 - DMI Gen3 Root port preset values per lane |
| Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane |
| **/ |
| UINT8 DmiGen3RootPortPreset[8]; |
| |
| /** Offset 0x0258 - DMI Gen3 End port preset values per lane |
| Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane |
| **/ |
| UINT8 DmiGen3EndPointPreset[8]; |
| |
| /** Offset 0x0260 - DMI Gen3 End port Hint values per lane |
| Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane |
| **/ |
| UINT8 DmiGen3EndPointHint[8]; |
| |
| /** Offset 0x0268 - DMI Gen3 RxCTLEp per-Bundle control |
| Range: 0-15, 0 is default for each bundle, must be specified based upon platform design |
| **/ |
| UINT8 DmiGen3RxCtlePeaking[4]; |
| |
| /** Offset 0x026C - BIST on Reset |
| Enable or Disable BIST on Reset; <b>0: Disable</b>; 1: Enable. |
| $EN_DIS |
| **/ |
| UINT8 BistOnReset; |
| |
| /** Offset 0x026D - Skip Stop PBET Timer Enable/Disable |
| Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable |
| $EN_DIS |
| **/ |
| UINT8 SkipStopPbet; |
| |
| /** Offset 0x026E - Over clocking support |
| Over clocking support; <b>0: Disable</b>; 1: Enable |
| $EN_DIS |
| **/ |
| UINT8 OcSupport; |
| |
| /** Offset 0x026F - Over clocking Lock |
| Over clocking Lock Enable/Disable; <b>0: Disable</b>; 1: Enable. |
| $EN_DIS |
| **/ |
| UINT8 OcLock; |
| |
| /** Offset 0x0270 - Maximum Core Turbo Ratio Override |
| Maximum core turbo ratio override allows to increase CPU core frequency beyond the |
| fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85 |
| **/ |
| UINT8 CoreMaxOcRatio; |
| |
| /** Offset 0x0271 - Core voltage mode |
| Core voltage mode; <b>0: Adaptive</b>; 1: Override. |
| $EN_DIS |
| **/ |
| UINT8 CoreVoltageMode; |
| |
| /** Offset 0x0272 - Maximum clr turbo ratio override |
| Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the |
| fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85 |
| **/ |
| UINT8 RingMaxOcRatio; |
| |
| /** Offset 0x0273 - Hyper Threading Enable/Disable |
| Enable or Disable Hyper Threading; 0: Disable; <b>1: Enable</b> |
| $EN_DIS |
| **/ |
| UINT8 HyperThreading; |
| |
| /** Offset 0x0274 - Enable or Disable CPU Ratio Override |
| Enable or Disable CPU Ratio Override; <b>0: Disable</b>; 1: Enable. |
| $EN_DIS |
| **/ |
| UINT8 CpuRatioOverride; |
| |
| /** Offset 0x0275 - CPU ratio value |
| CPU ratio value. Valid Range 0 to 63 |
| **/ |
| UINT8 CpuRatio; |
| |
| /** Offset 0x0276 - Boot frequency |
| Sets the boot frequency starting from reset vector.- 0: Maximum battery performance.- |
| <b>1: Maximum non-turbo performance</b>.- 2: Turbo performance. @note If Turbo |
| is selected BIOS will start in max non-turbo mode and switch to Turbo mode. |
| 0:0, 1:1, 2:2 |
| **/ |
| UINT8 BootFrequency; |
| |
| /** Offset 0x0277 - Number of active cores |
| Number of active cores(Depends on Number of cores). <b>0: All</b>;<b>1: 1 </b>;<b>2: |
| 2 </b>;<b>3: 3 </b> |
| 0:All, 1:1, 2:2, 3:3 |
| **/ |
| UINT8 ActiveCoreCount; |
| |
| /** Offset 0x0278 - Processor Early Power On Configuration FCLK setting |
| <b>0: 800 MHz (ULT/ULX)</b>. <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.- |
| 2: 400 MHz. - 3: Reserved |
| 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved |
| **/ |
| UINT8 FClkFrequency; |
| |
| /** Offset 0x0279 - Set JTAG power in C10 and deeper power states |
| False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10 |
| and deeper power states for debug purpose. <b>0: False</b>; 1: True. |
| 0: False, 1: True |
| **/ |
| UINT8 JtagC10PowerGateDisable; |
| |
| /** Offset 0x027A - Enable or Disable VMX |
| Enable or Disable VMX; 0: Disable; <b>1: Enable</b>. |
| $EN_DIS |
| **/ |
| UINT8 VmxEnable; |
| |
| /** Offset 0x027B - AVX2 Ratio Offset |
| 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio |
| vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. |
| **/ |
| UINT8 Avx2RatioOffset; |
| |
| /** Offset 0x027C - AVX3 Ratio Offset |
| 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio |
| vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. |
| **/ |
| UINT8 Avx3RatioOffset; |
| |
| /** Offset 0x027D - BCLK Adaptive Voltage Enable |
| When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0: |
| Disable;<b> 1: Enable |
| $EN_DIS |
| **/ |
| UINT8 BclkAdaptiveVoltage; |
| |
| /** Offset 0x027E - core voltage override |
| The core voltage override which is applied to the entire range of cpu core frequencies. |
| Valid Range 0 to 2000 |
| **/ |
| UINT16 CoreVoltageOverride; |
| |
| /** Offset 0x0280 - Core Turbo voltage Adaptive |
| Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode. |
| Valid Range 0 to 2000 |
| **/ |
| UINT16 CoreVoltageAdaptive; |
| |
| /** Offset 0x0282 - Core Turbo voltage Offset |
| The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 |
| **/ |
| UINT16 CoreVoltageOffset; |
| |
| /** Offset 0x0284 - Core PLL voltage offset |
| Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 |
| **/ |
| UINT8 CorePllVoltageOffset; |
| |
| /** Offset 0x0285 - Ring Downbin |
| Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always |
| lower than the core ratio.0: Disable; <b>1: Enable.</b> |
| $EN_DIS |
| **/ |
| UINT8 RingDownBin; |
| |
| /** Offset 0x0286 - Ring voltage mode |
| Ring voltage mode; <b>0: Adaptive</b>; 1: Override. |
| $EN_DIS |
| **/ |
| UINT8 RingVoltageMode; |
| |
| /** Offset 0x0287 - TjMax Offset |
| TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support |
| TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 |
| **/ |
| UINT8 TjMaxOffset; |
| |
| /** Offset 0x0288 - Ring voltage override |
| The ring voltage override which is applied to the entire range of cpu ring frequencies. |
| Valid Range 0 to 2000 |
| **/ |
| UINT16 RingVoltageOverride; |
| |
| /** Offset 0x028A - Ring Turbo voltage Adaptive |
| Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode. |
| Valid Range 0 to 2000 |
| **/ |
| UINT16 RingVoltageAdaptive; |
| |
| /** Offset 0x028C - Ring Turbo voltage Offset |
| The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000 |
| **/ |
| UINT16 RingVoltageOffset; |
| |
| /** Offset 0x028E |
| **/ |
| UINT8 UnusedUpdSpace7[2]; |
| |
| /** Offset 0x0290 - ElixirSpringsPatchAddr |
| Address of Elixir Springs Patches |
| **/ |
| UINT32 ElixirSpringsPatchAddr; |
| |
| /** Offset 0x0294 - ElixirSpringsPatchSize |
| Size of Elixir Springs Patches |
| **/ |
| UINT32 ElixirSpringsPatchSize; |
| |
| /** Offset 0x0298 - CPU Run Control |
| Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; <b>2: |
| No Change</b> |
| 0:Disabled, 1:Enabled, 2:No Change |
| **/ |
| UINT8 DebugInterfaceEnable; |
| |
| /** Offset 0x0299 - CPU Run Control Lock |
| Lock or Unlock CPU Run Control; 0: Disable; <b>1: Enable</b>. |
| $EN_DIS |
| **/ |
| UINT8 DebugInterfaceLockEnable; |
| |
| /** Offset 0x029A - BiosGuard |
| Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable |
| $EN_DIS |
| **/ |
| UINT8 BiosGuard; |
| |
| /** Offset 0x029B |
| **/ |
| UINT8 BiosGuardToolsInterface; |
| |
| /** Offset 0x029C - EnableSgx |
| Enable/Disable. 0: Disable, Enable/Disable SGX feature, 1: enable, 2: Software Control |
| 0: Disable, 1: Enable, 2: Software Control |
| **/ |
| UINT8 EnableSgx; |
| |
| /** Offset 0x029D - Txt |
| Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable |
| $EN_DIS |
| **/ |
| UINT8 Txt; |
| |
| /** Offset 0x029E |
| **/ |
| UINT8 UnusedUpdSpace8[2]; |
| |
| /** Offset 0x02A0 - PrmrrSize |
| Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable |
| **/ |
| UINT32 PrmrrSize; |
| |
| /** Offset 0x02A4 - SinitMemorySize |
| Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable |
| **/ |
| UINT32 SinitMemorySize; |
| |
| /** Offset 0x02A8 - TxtDprMemoryBase |
| Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable |
| **/ |
| UINT64 TxtDprMemoryBase; |
| |
| /** Offset 0x02B0 - TxtHeapMemorySize |
| Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable |
| **/ |
| UINT32 TxtHeapMemorySize; |
| |
| /** Offset 0x02B4 - TxtDprMemorySize |
| Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable |
| **/ |
| UINT32 TxtDprMemorySize; |
| |
| /** Offset 0x02B8 - BiosAcmBase |
| Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable |
| **/ |
| UINT32 BiosAcmBase; |
| |
| /** Offset 0x02BC - BiosAcmSize |
| Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable |
| **/ |
| UINT32 BiosAcmSize; |
| |
| /** Offset 0x02C0 - ApStartupBase |
| Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable |
| **/ |
| UINT32 ApStartupBase; |
| |
| /** Offset 0x02C4 - TgaSize |
| Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable |
| **/ |
| UINT32 TgaSize; |
| |
| /** Offset 0x02C8 - TxtLcpPdBase |
| Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable |
| **/ |
| UINT64 TxtLcpPdBase; |
| |
| /** Offset 0x02D0 - TxtLcpPdSize |
| Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable |
| **/ |
| UINT64 TxtLcpPdSize; |
| |
| /** Offset 0x02D8 - IsTPMPresence |
| IsTPMPresence default values |
| **/ |
| UINT8 IsTPMPresence; |
| |
| /** Offset 0x02D9 - ReservedSecurityPreMem |
| Reserved for Security Pre-Mem |
| $EN_DIS |
| **/ |
| UINT8 ReservedSecurityPreMem[6]; |
| |
| /** Offset 0x02DF - PCH Master Clock Gating Control |
| Provide a master control for clock gating for all PCH devices, 0: Disabled; 1: Default |
| $EN_DIS |
| **/ |
| UINT8 PchMasterClockGating; |
| |
| /** Offset 0x02E0 - PCH Master Power Gating Control |
| Provide a master control for pwoer gating for all PCH devices, 0: Disabled; 1: Default |
| $EN_DIS |
| **/ |
| UINT8 PchMasterPowerGating; |
| |
| /** Offset 0x02E1 |
| **/ |
| UINT8 UnusedUpdSpace9; |
| |
| /** Offset 0x02E2 - FIA Lane Reversal Enable/Disable config mask |
| Enable/Disable. 0: Disable, 1: enable, Enable or disable Lane Reversal. If Enabled, |
| the x2 FIA Lane will be flipped |
| **/ |
| UINT16 FiaLaneReversalEnable; |
| |
| /** Offset 0x02E4 - Enable PCH HSIO PCIE Rx Set Ctle |
| Enable PCH PCIe Gen 3 Set CTLE Value. |
| **/ |
| UINT8 PchPcieHsioRxSetCtleEnable[24]; |
| |
| /** Offset 0x02FC - PCH HSIO PCIE Rx Set Ctle Value |
| PCH PCIe Gen 3 Set CTLE Value. |
| **/ |
| UINT8 PchPcieHsioRxSetCtle[24]; |
| |
| /** Offset 0x0314 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[24]; |
| |
| /** Offset 0x032C - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value |
| PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchPcieHsioTxGen1DownscaleAmp[24]; |
| |
| /** Offset 0x0344 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[24]; |
| |
| /** Offset 0x035C - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value |
| PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchPcieHsioTxGen2DownscaleAmp[24]; |
| |
| /** Offset 0x0374 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[24]; |
| |
| /** Offset 0x038C - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value |
| PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchPcieHsioTxGen3DownscaleAmp[24]; |
| |
| /** Offset 0x03A4 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen1DeEmphEnable[24]; |
| |
| /** Offset 0x03BC - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value |
| PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchPcieHsioTxGen1DeEmph[24]; |
| |
| /** Offset 0x03D4 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[24]; |
| |
| /** Offset 0x03EC - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value |
| PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchPcieHsioTxGen2DeEmph3p5[24]; |
| |
| /** Offset 0x0404 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[24]; |
| |
| /** Offset 0x041C - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value |
| PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchPcieHsioTxGen2DeEmph6p0[24]; |
| |
| /** Offset 0x0434 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioRxGen1EqBoostMagEnable[8]; |
| |
| /** Offset 0x043C - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value |
| PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioRxGen1EqBoostMag[8]; |
| |
| /** Offset 0x0444 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioRxGen2EqBoostMagEnable[8]; |
| |
| /** Offset 0x044C - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value |
| PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioRxGen2EqBoostMag[8]; |
| |
| /** Offset 0x0454 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioRxGen3EqBoostMagEnable[8]; |
| |
| /** Offset 0x045C - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value |
| PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioRxGen3EqBoostMag[8]; |
| |
| /** Offset 0x0464 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8]; |
| |
| /** Offset 0x046C - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value |
| PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioTxGen1DownscaleAmp[8]; |
| |
| /** Offset 0x0474 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8]; |
| |
| /** Offset 0x047C - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value |
| PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioTxGen2DownscaleAmp[8]; |
| |
| /** Offset 0x0484 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8]; |
| |
| /** Offset 0x048C - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value |
| PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioTxGen3DownscaleAmp[8]; |
| |
| /** Offset 0x0494 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen1DeEmphEnable[8]; |
| |
| /** Offset 0x049C - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting |
| PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchSataHsioTxGen1DeEmph[8]; |
| |
| /** Offset 0x04A4 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen2DeEmphEnable[8]; |
| |
| /** Offset 0x04AC - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting |
| PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchSataHsioTxGen2DeEmph[8]; |
| |
| /** Offset 0x04B4 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen3DeEmphEnable[8]; |
| |
| /** Offset 0x04BC - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting |
| PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchSataHsioTxGen3DeEmph[8]; |
| |
| /** Offset 0x04C4 - PCH LPC Enhance the port 8xh decoding |
| Original LPC only decodes one byte of port 80h. |
| $EN_DIS |
| **/ |
| UINT8 PchLpcEnhancePort8xhDecoding; |
| |
| /** Offset 0x04C5 - PCH Port80 Route |
| Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. |
| $EN_DIS |
| **/ |
| UINT8 PchPort80Route; |
| |
| /** Offset 0x04C6 - Enable SMBus ARP support |
| Enable SMBus ARP support. |
| $EN_DIS |
| **/ |
| UINT8 SmbusArpEnable; |
| |
| /** Offset 0x04C7 - Number of RsvdSmbusAddressTable. |
| The number of elements in the RsvdSmbusAddressTable. |
| **/ |
| UINT8 PchNumRsvdSmbusAddresses; |
| |
| /** Offset 0x04C8 - SMBUS Base Address |
| SMBUS Base Address (IO space). |
| **/ |
| UINT16 PchSmbusIoBase; |
| |
| /** Offset 0x04CA - Enable SMBus Alert Pin |
| Enable SMBus Alert Pin. |
| $EN_DIS |
| **/ |
| UINT8 PchSmbAlertEnable; |
| |
| /** Offset 0x04CB - Usage type for ClkSrc |
| 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use |
| (free running), 0xFF: not used |
| **/ |
| UINT8 PcieClkSrcUsage[16]; |
| |
| /** Offset 0x04DB - ClkReq-to-ClkSrc mapping |
| Number of ClkReq signal assigned to ClkSrc |
| **/ |
| UINT8 PcieClkSrcClkReq[16]; |
| |
| /** Offset 0x04EB |
| **/ |
| UINT8 UnusedUpdSpace10; |
| |
| /** Offset 0x04EC - Point of RsvdSmbusAddressTable |
| Array of addresses reserved for non-ARP-capable SMBus devices. |
| **/ |
| UINT32 RsvdSmbusAddressTablePtr; |
| |
| /** Offset 0x04F0 - Enable PCIE RP Mask |
| Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 |
| for port1, bit1 for port2, and so on. |
| **/ |
| UINT32 PcieRpEnableMask; |
| |
| /** Offset 0x04F4 - Debug Interfaces |
| Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, |
| BIT2 - Not used. |
| **/ |
| UINT8 PcdDebugInterfaceFlags; |
| |
| /** Offset 0x04F5 - Serial Io Uart Debug Controller Number |
| Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT |
| Core interface, it cannot be used for debug purpose. |
| 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 |
| **/ |
| UINT8 SerialIoUartDebugControllerNumber; |
| |
| /** Offset 0x04F6 - Serial Io Uart Debug Auto Flow |
| Enables UART hardware flow control, CTS and RTS lines. |
| $EN_DIS |
| **/ |
| UINT8 SerialIoUartDebugAutoFlow; |
| |
| /** Offset 0x04F7 |
| **/ |
| UINT8 UnusedUpdSpace11; |
| |
| /** Offset 0x04F8 - Serial Io Uart Debug BaudRate |
| Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600, |
| 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000 |
| **/ |
| UINT32 SerialIoUartDebugBaudRate; |
| |
| /** Offset 0x04FC - Serial Io Uart Debug Parity |
| Set default Parity. |
| 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity |
| **/ |
| UINT8 SerialIoUartDebugParity; |
| |
| /** Offset 0x04FD - Serial Io Uart Debug Stop Bits |
| Set default stop bits. |
| 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits |
| **/ |
| UINT8 SerialIoUartDebugStopBits; |
| |
| /** Offset 0x04FE - Serial Io Uart Debug Data Bits |
| Set default word length. 0: Default, 5,6,7,8 |
| 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS |
| **/ |
| UINT8 SerialIoUartDebugDataBits; |
| |
| /** Offset 0x04FF |
| **/ |
| UINT8 UnusedUpdSpace12; |
| |
| /** Offset 0x0500 - Serial Io Uart Debug Mmio Base |
| Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode |
| = SerialIoUartPci. |
| **/ |
| UINT32 SerialIoUartDebugMmioBase; |
| |
| /** Offset 0x0504 - ISA Serial Base selection |
| Select ISA Serial Base address. Default is 0x3F8. |
| 0:0x3F8, 1:0x2F8 |
| **/ |
| UINT8 PcdIsaSerialUartBase; |
| |
| /** Offset 0x0505 - GT PLL voltage offset |
| Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 |
| **/ |
| UINT8 GtPllVoltageOffset; |
| |
| /** Offset 0x0506 - Ring PLL voltage offset |
| Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 |
| **/ |
| UINT8 RingPllVoltageOffset; |
| |
| /** Offset 0x0507 - System Agent PLL voltage offset |
| Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 |
| **/ |
| UINT8 SaPllVoltageOffset; |
| |
| /** Offset 0x0508 - Memory Controller PLL voltage offset |
| Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 |
| **/ |
| UINT8 McPllVoltageOffset; |
| |
| /** Offset 0x0509 - MRC Safe Config |
| Enables/Disable MRC Safe Config |
| $EN_DIS |
| **/ |
| UINT8 MrcSafeConfig; |
| |
| /** Offset 0x050A - TCSS Thunderbolt PCIE Root Port 0 Enable |
| Set TCSS Thunderbolt PCIE Root Port 0. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssItbtPcie0En; |
| |
| /** Offset 0x050B - TCSS Thunderbolt PCIE Root Port 1 Enable |
| Set TCSS Thunderbolt PCIE Root Port 1. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssItbtPcie1En; |
| |
| /** Offset 0x050C - TCSS Thunderbolt PCIE Root Port 2 Enable |
| Set TCSS Thunderbolt PCIE Root Port 2. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssItbtPcie2En; |
| |
| /** Offset 0x050D - TCSS Thunderbolt PCIE Root Port 3 Enable |
| Set TCSS Thunderbolt PCIE Root Port 3. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssItbtPcie3En; |
| |
| /** Offset 0x050E - TCSS USB HOST (xHCI) Enable |
| Set TCSS XHCI. 0:Disabled 1:Enabled - Must be enabled if xDCI is enabled below |
| $EN_DIS |
| **/ |
| UINT8 TcssXhciEn; |
| |
| /** Offset 0x050F - TCSS USB DEVICE (xDCI) Enable |
| Set TCSS XDCI. 0:Disabled 1:Enabled - xHCI must be enabled if xDCI is enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssXdciEn; |
| |
| /** Offset 0x0510 - TCSS DMA0 Enable |
| Set TCSS DMA0. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssDma0En; |
| |
| /** Offset 0x0511 - TCSS DMA1 Enable |
| Set TCSS DMA1. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssDma1En; |
| |
| /** Offset 0x0512 - PcdSerialDebugBaudRate |
| Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. |
| 3:9600, 4:19200, 6:56700, 7:115200 |
| **/ |
| UINT8 PcdSerialDebugBaudRate; |
| |
| /** Offset 0x0513 - HobBufferSize |
| Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB |
| total HOB size). |
| 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value |
| **/ |
| UINT8 HobBufferSize; |
| |
| /** Offset 0x0514 - Early Command Training |
| Enables/Disable Early Command Training |
| $EN_DIS |
| **/ |
| UINT8 ECT; |
| |
| /** Offset 0x0515 - SenseAmp Offset Training |
| Enables/Disable SenseAmp Offset Training |
| $EN_DIS |
| **/ |
| UINT8 SOT; |
| |
| /** Offset 0x0516 - Early ReadMPR Timing Centering 2D |
| Enables/Disable Early ReadMPR Timing Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 ERDMPRTC2D; |
| |
| /** Offset 0x0517 - Read MPR Training |
| Enables/Disable Read MPR Training |
| $EN_DIS |
| **/ |
| UINT8 RDMPRT; |
| |
| /** Offset 0x0518 - Receive Enable Training |
| Enables/Disable Receive Enable Training |
| $EN_DIS |
| **/ |
| UINT8 RCVET; |
| |
| /** Offset 0x0519 - Jedec Write Leveling |
| Enables/Disable Jedec Write Leveling |
| $EN_DIS |
| **/ |
| UINT8 JWRL; |
| |
| /** Offset 0x051A - Early Write Time Centering 2D |
| Enables/Disable Early Write Time Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 EWRTC2D; |
| |
| /** Offset 0x051B - Early Read Time Centering 2D |
| Enables/Disable Early Read Time Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 ERDTC2D; |
| |
| /** Offset 0x051C - Write Timing Centering 1D |
| Enables/Disable Write Timing Centering 1D |
| $EN_DIS |
| **/ |
| UINT8 WRTC1D; |
| |
| /** Offset 0x051D - Write Voltage Centering 1D |
| Enables/Disable Write Voltage Centering 1D |
| $EN_DIS |
| **/ |
| UINT8 WRVC1D; |
| |
| /** Offset 0x051E - Read Timing Centering 1D |
| Enables/Disable Read Timing Centering 1D |
| $EN_DIS |
| **/ |
| UINT8 RDTC1D; |
| |
| /** Offset 0x051F - Dimm ODT Training |
| Enables/Disable Dimm ODT Training |
| $EN_DIS |
| **/ |
| UINT8 DIMMODTT; |
| |
| /** Offset 0x0520 - DIMM RON Training |
| Enables/Disable DIMM RON Training |
| $EN_DIS |
| **/ |
| UINT8 DIMMRONT; |
| |
| /** Offset 0x0521 - Write Drive Strength/Equalization 2D |
| Enables/Disable Write Drive Strength/Equalization 2D |
| $EN_DIS |
| **/ |
| UINT8 WRDSEQT; |
| |
| /** Offset 0x0522 - Write Slew Rate Training |
| Enables/Disable Write Slew Rate Training |
| $EN_DIS |
| **/ |
| UINT8 WRSRT; |
| |
| /** Offset 0x0523 - Read ODT Training |
| Enables/Disable Read ODT Training |
| $EN_DIS |
| **/ |
| UINT8 RDODTT; |
| |
| /** Offset 0x0524 - Read Equalization Training |
| Enables/Disable Read Equalization Training |
| $EN_DIS |
| **/ |
| UINT8 RDEQT; |
| |
| /** Offset 0x0525 - Read Amplifier Training |
| Enables/Disable Read Amplifier Training |
| $EN_DIS |
| **/ |
| UINT8 RDAPT; |
| |
| /** Offset 0x0526 - Write Timing Centering 2D |
| Enables/Disable Write Timing Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 WRTC2D; |
| |
| /** Offset 0x0527 - Read Timing Centering 2D |
| Enables/Disable Read Timing Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 RDTC2D; |
| |
| /** Offset 0x0528 - Write Voltage Centering 2D |
| Enables/Disable Write Voltage Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 WRVC2D; |
| |
| /** Offset 0x0529 - Read Voltage Centering 2D |
| Enables/Disable Read Voltage Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 RDVC2D; |
| |
| /** Offset 0x052A - Command Voltage Centering |
| Enables/Disable Command Voltage Centering |
| $EN_DIS |
| **/ |
| UINT8 CMDVC; |
| |
| /** Offset 0x052B - Late Command Training |
| Enables/Disable Late Command Training |
| $EN_DIS |
| **/ |
| UINT8 LCT; |
| |
| /** Offset 0x052C - Round Trip Latency Training |
| Enables/Disable Round Trip Latency Training |
| $EN_DIS |
| **/ |
| UINT8 RTL; |
| |
| /** Offset 0x052D - Turn Around Timing Training |
| Enables/Disable Turn Around Timing Training |
| $EN_DIS |
| **/ |
| UINT8 TAT; |
| |
| /** Offset 0x052E - Receive Enable Centering 1D |
| Enables/Disable Receive Enable Centering 1D |
| $EN_DIS |
| **/ |
| UINT8 RCVENC1D; |
| |
| /** Offset 0x052F - Rank Margin Tool |
| Enable/disable Rank Margin Tool. |
| $EN_DIS |
| **/ |
| UINT8 RMT; |
| |
| /** Offset 0x0530 - Margin Limit Check |
| Margin Limit Check. Choose level of margin check |
| 0:Disable, 1:L1, 2:L2, 3:Both |
| **/ |
| UINT8 MarginLimitCheck; |
| |
| /** Offset 0x0531 |
| **/ |
| UINT8 UnusedUpdSpace13; |
| |
| /** Offset 0x0532 - Margin Limit L2 |
| % of L1 check for margin limit check |
| **/ |
| UINT16 MarginLimitL2; |
| |
| /** Offset 0x0534 - Memory Test |
| Enables/Disable Memory Test |
| $EN_DIS |
| **/ |
| UINT8 MEMTST; |
| |
| /** Offset 0x0535 - DIMM SPD Alias Test |
| Enables/Disable DIMM SPD Alias Test |
| $EN_DIS |
| **/ |
| UINT8 ALIASCHK; |
| |
| /** Offset 0x0536 - Retrain Margin Check |
| Enables/Disable Retrain Margin Check |
| $EN_DIS |
| **/ |
| UINT8 RMC; |
| |
| /** Offset 0x0537 - Write Drive Strength Up/Dn independently |
| Enables/Disable Write Drive Strength Up/Dn independently |
| $EN_DIS |
| **/ |
| UINT8 WRDSUDT; |
| |
| /** Offset 0x0538 - Command Slew Rate Training |
| Enables/Disable Command Slew Rate Training |
| $EN_DIS |
| **/ |
| UINT8 CMDSR; |
| |
| /** Offset 0x0539 - Command Drive Strength and Equalization 2D |
| Enables/Disable Command Drive Strength and Equalization 2D |
| $EN_DIS |
| **/ |
| UINT8 CMDDSEQ; |
| |
| /** Offset 0x053A - Command Normalization |
| Enables/Disable Command Normalization |
| $EN_DIS |
| **/ |
| UINT8 CMDNORM; |
| |
| /** Offset 0x053B - Early DQ Write Drive Strength and Equalization Training |
| Enables/Disable Early DQ Write Drive Strength and Equalization Training |
| $EN_DIS |
| **/ |
| UINT8 EWRDSEQ; |
| |
| /** Offset 0x053C - Read Voltage Centering |
| Enables/Disable Read Voltage Centering |
| $EN_DIS |
| **/ |
| UINT8 RDVC1D; |
| |
| /** Offset 0x053D - Write TCO Comp Training |
| Enables/Disable Write TCO Comp Training |
| $EN_DIS |
| **/ |
| UINT8 TXTCO; |
| |
| /** Offset 0x053E - Clock TCO Comp Training |
| Enables/Disable Clock TCO Comp Training |
| $EN_DIS |
| **/ |
| UINT8 CLKTCO; |
| |
| /** Offset 0x053F - Dimm ODT CA Training |
| Enables/Disable Dimm ODT CA Training |
| $EN_DIS |
| **/ |
| UINT8 DIMMODTCA; |
| |
| /** Offset 0x0540 - Write TCO Dqs Training |
| Enables/Disable Write TCO Dqs Training |
| $EN_DIS |
| **/ |
| UINT8 TXTCODQS; |
| |
| /** Offset 0x0541 - Duty Cycle Correction |
| Enables/Disable Duty Cycle Correction |
| $EN_DIS |
| **/ |
| UINT8 DCC; |
| |
| /** Offset 0x0542 - DQ DFE Training |
| Enable/Disable DQ DFE Training |
| $EN_DIS |
| **/ |
| UINT8 DQDFE; |
| |
| /** Offset 0x0543 - Sense Amplifier Correction Training |
| Enable/Disable Sense Amplifier Correction Training |
| $EN_DIS |
| **/ |
| UINT8 SOTC; |
| |
| /** Offset 0x0544 - ECC Support |
| Enables/Disable ECC Support |
| $EN_DIS |
| **/ |
| UINT8 EccSupport; |
| |
| /** Offset 0x0545 - Memory Remap |
| Enables/Disable Memory Remap |
| $EN_DIS |
| **/ |
| UINT8 RemapEnable; |
| |
| /** Offset 0x0546 - MRC Time Measure |
| Enable/Disable MRC Time Measure |
| $EN_DIS |
| **/ |
| UINT8 MrcTimeMeasure; |
| |
| /** Offset 0x0547 - MRC Fast Boot |
| Enable/Disable MRC Fast flow |
| $EN_DIS |
| **/ |
| UINT8 MrcFastBoot; |
| |
| /** Offset 0x0548 - MRC Force Training on Warm |
| Enables/Disable the MRC training on warm boot |
| $EN_DIS |
| **/ |
| UINT8 MrcTrainOnWarm; |
| |
| /** Offset 0x0549 - Rank Interleave support |
| Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at |
| the same time. |
| $EN_DIS |
| **/ |
| UINT8 RankInterleave; |
| |
| /** Offset 0x054A - Enhanced Interleave support |
| Enables/Disable Enhanced Interleave support |
| $EN_DIS |
| **/ |
| UINT8 EnhancedInterleave; |
| |
| /** Offset 0x054B - Memory Trace |
| Enable Memory Trace of Ch 0 to Ch 1 using Stacked Mode. Both channels must be of |
| equal size. This option may change TOLUD and REMAP values as needed. |
| $EN_DIS |
| **/ |
| UINT8 MemoryTrace; |
| |
| /** Offset 0x054C - Ch Hash Support |
| Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode |
| $EN_DIS |
| **/ |
| UINT8 ChHashEnable; |
| |
| /** Offset 0x054D - Extern Therm Status |
| Enables/Disable Extern Therm Status |
| $EN_DIS |
| **/ |
| UINT8 EnableExtts; |
| |
| /** Offset 0x054E - Closed Loop Therm Manage |
| Enables/Disable Closed Loop Therm Manage |
| $EN_DIS |
| **/ |
| UINT8 EnableCltm; |
| |
| /** Offset 0x054F - Open Loop Therm Manage |
| Enables/Disable Open Loop Therm Manage |
| $EN_DIS |
| **/ |
| UINT8 EnableOltm; |
| |
| /** Offset 0x0550 - DDR PowerDown and idle counter |
| Enables/Disable DDR PowerDown and idle counter |
| $EN_DIS |
| **/ |
| UINT8 EnablePwrDn; |
| |
| /** Offset 0x0551 - DDR PowerDown and idle counter - LPDDR |
| Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) |
| $EN_DIS |
| **/ |
| UINT8 EnablePwrDnLpddr; |
| |
| /** Offset 0x0552 - Use user provided power weights, scale factor, and channel power floor values |
| Enables/Disable Use user provided power weights, scale factor, and channel power |
| floor values |
| $EN_DIS |
| **/ |
| UINT8 UserPowerWeightsEn; |
| |
| /** Offset 0x0553 - RAPL PL Lock |
| Enables/Disable RAPL PL Lock |
| $EN_DIS |
| **/ |
| UINT8 RaplLim2Lock; |
| |
| /** Offset 0x0554 - RAPL PL 2 enable |
| Enables/Disable RAPL PL 2 enable |
| $EN_DIS |
| **/ |
| UINT8 RaplLim2Ena; |
| |
| /** Offset 0x0555 - RAPL PL 1 enable |
| Enables/Disable RAPL PL 1 enable |
| $EN_DIS |
| **/ |
| UINT8 RaplLim1Ena; |
| |
| /** Offset 0x0556 - SelfRefresh Enable |
| Enables/Disable SelfRefresh Enable |
| $EN_DIS |
| **/ |
| UINT8 SrefCfgEna; |
| |
| /** Offset 0x0557 - Throttler CKEMin Defeature - LPDDR |
| Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) |
| $EN_DIS |
| **/ |
| UINT8 ThrtCkeMinDefeatLpddr; |
| |
| /** Offset 0x0558 - Throttler CKEMin Defeature |
| Enables/Disable Throttler CKEMin Defeature |
| $EN_DIS |
| **/ |
| UINT8 ThrtCkeMinDefeat; |
| |
| /** Offset 0x0559 - Enable RH Prevention |
| Enables/Disable RH Prevention |
| $EN_DIS |
| **/ |
| UINT8 RhPrevention; |
| |
| /** Offset 0x055A - Exit On Failure (MRC) |
| Enables/Disable Exit On Failure (MRC) |
| $EN_DIS |
| **/ |
| UINT8 ExitOnFailure; |
| |
| /** Offset 0x055B - LPDDR Thermal Sensor |
| Enables/Disable LPDDR Thermal Sensor |
| $EN_DIS |
| **/ |
| UINT8 DdrThermalSensor; |
| |
| /** Offset 0x055C - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP |
| Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP |
| $EN_DIS |
| **/ |
| UINT8 Ddr4DdpSharedClock; |
| |
| /** Offset 0x055D - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP |
| ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP |
| $EN_DIS |
| **/ |
| UINT8 Ddr4DdpSharedZq; |
| |
| /** Offset 0x055E |
| **/ |
| UINT8 UnusedUpdSpace14[2]; |
| |
| /** Offset 0x0560 - Base reference clock value |
| Base reference clock value, in Hertz(Default is 125Hz) |
| 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz |
| **/ |
| UINT32 BClkFrequency; |
| |
| /** Offset 0x0564 - Ch Hash Interleaved Bit |
| Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave |
| the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 |
| 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 |
| **/ |
| UINT8 ChHashInterleaveBit; |
| |
| /** Offset 0x0565 |
| **/ |
| UINT8 UnusedUpdSpace15; |
| |
| /** Offset 0x0566 - Ch Hash Mask |
| Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to |
| BITS [19:6] Default is 0x30CC |
| **/ |
| UINT16 ChHashMask; |
| |
| /** Offset 0x0568 - Extended Bank Hashing |
| Eanble/Disable ExtendedBankHashing |
| $EN_DIS |
| **/ |
| UINT8 ExtendedBankHashing; |
| |
| /** Offset 0x0569 - Energy Scale Factor |
| Energy Scale Factor, Default is 4 |
| **/ |
| UINT8 EnergyScaleFact; |
| |
| /** Offset 0x056A - EPG DIMM Idd3N |
| Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on |
| a per DIMM basis. Default is 26 |
| **/ |
| UINT16 Idd3n; |
| |
| /** Offset 0x056C - EPG DIMM Idd3P |
| Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated |
| on a per DIMM basis. Default is 11 |
| **/ |
| UINT16 Idd3p; |
| |
| /** Offset 0x056E - RH Activation Probability |
| RH Activation Probability, Probability value is 1/2^(inputvalue) |
| **/ |
| UINT8 RhActProbability; |
| |
| /** Offset 0x056F - RAPL PL 2 WindowX |
| Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) |
| **/ |
| UINT8 RaplLim2WindX; |
| |
| /** Offset 0x0570 - RAPL PL 2 WindowY |
| Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) |
| **/ |
| UINT8 RaplLim2WindY; |
| |
| /** Offset 0x0571 - RAPL PL 1 WindowX |
| Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) |
| **/ |
| UINT8 RaplLim1WindX; |
| |
| /** Offset 0x0572 - RAPL PL 1 WindowY |
| Power PL 1 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) |
| **/ |
| UINT8 RaplLim1WindY; |
| |
| /** Offset 0x0573 |
| **/ |
| UINT8 UnusedUpdSpace16; |
| |
| /** Offset 0x0574 - RAPL PL 2 Power |
| range[0;2^14-1]= [2047.875;0]in W, (224= Def) |
| **/ |
| UINT16 RaplLim2Pwr; |
| |
| /** Offset 0x0576 - RAPL PL 1 Power |
| range[0;2^14-1]= [2047.875;0]in W, (224= Def) |
| **/ |
| UINT16 RaplLim1Pwr; |
| |
| /** Offset 0x0578 - Warm Threshold Ch0 Dimm0 |
| range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 |
| **/ |
| UINT8 WarmThresholdCh0Dimm0; |
| |
| /** Offset 0x0579 - Warm Threshold Ch0 Dimm1 |
| range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 |
| **/ |
| UINT8 WarmThresholdCh0Dimm1; |
| |
| /** Offset 0x057A - Warm Threshold Ch1 Dimm0 |
| range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 |
| **/ |
| UINT8 WarmThresholdCh1Dimm0; |
| |
| /** Offset 0x057B - Warm Threshold Ch1 Dimm1 |
| range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 |
| **/ |
| UINT8 WarmThresholdCh1Dimm1; |
| |
| /** Offset 0x057C - Hot Threshold Ch0 Dimm0 |
| range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 |
| **/ |
| UINT8 HotThresholdCh0Dimm0; |
| |
| /** Offset 0x057D - Hot Threshold Ch0 Dimm1 |
| range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 |
| **/ |
| UINT8 HotThresholdCh0Dimm1; |
| |
| /** Offset 0x057E - Hot Threshold Ch1 Dimm0 |
| range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 |
| **/ |
| UINT8 HotThresholdCh1Dimm0; |
| |
| /** Offset 0x057F - Hot Threshold Ch1 Dimm1 |
| range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 |
| **/ |
| UINT8 HotThresholdCh1Dimm1; |
| |
| /** Offset 0x0580 - Warm Budget Ch0 Dimm0 |
| range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM |
| **/ |
| UINT8 WarmBudgetCh0Dimm0; |
| |
| /** Offset 0x0581 - Warm Budget Ch0 Dimm1 |
| range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM |
| **/ |
| UINT8 WarmBudgetCh0Dimm1; |
| |
| /** Offset 0x0582 - Warm Budget Ch1 Dimm0 |
| range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM |
| **/ |
| UINT8 WarmBudgetCh1Dimm0; |
| |
| /** Offset 0x0583 - Warm Budget Ch1 Dimm1 |
| range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM |
| **/ |
| UINT8 WarmBudgetCh1Dimm1; |
| |
| /** Offset 0x0584 - Hot Budget Ch0 Dimm0 |
| range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM |
| **/ |
| UINT8 HotBudgetCh0Dimm0; |
| |
| /** Offset 0x0585 - Hot Budget Ch0 Dimm1 |
| range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM |
| **/ |
| UINT8 HotBudgetCh0Dimm1; |
| |
| /** Offset 0x0586 - Hot Budget Ch1 Dimm0 |
| range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM |
| **/ |
| UINT8 HotBudgetCh1Dimm0; |
| |
| /** Offset 0x0587 - Hot Budget Ch1 Dimm1 |
| range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM |
| **/ |
| UINT8 HotBudgetCh1Dimm1; |
| |
| /** Offset 0x0588 - Idle Energy Ch0Dimm0 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyCh0Dimm0; |
| |
| /** Offset 0x0589 - Idle Energy Ch0Dimm1 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyCh0Dimm1; |
| |
| /** Offset 0x058A - Idle Energy Ch1Dimm0 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyCh1Dimm0; |
| |
| /** Offset 0x058B - Idle Energy Ch1Dimm1 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyCh1Dimm1; |
| |
| /** Offset 0x058C - PowerDown Energy Ch0Dimm0 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) |
| **/ |
| UINT8 PdEnergyCh0Dimm0; |
| |
| /** Offset 0x058D - PowerDown Energy Ch0Dimm1 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) |
| **/ |
| UINT8 PdEnergyCh0Dimm1; |
| |
| /** Offset 0x058E - PowerDown Energy Ch1Dimm0 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) |
| **/ |
| UINT8 PdEnergyCh1Dimm0; |
| |
| /** Offset 0x058F - PowerDown Energy Ch1Dimm1 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) |
| **/ |
| UINT8 PdEnergyCh1Dimm1; |
| |
| /** Offset 0x0590 - Activate Energy Ch0Dimm0 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyCh0Dimm0; |
| |
| /** Offset 0x0591 - Activate Energy Ch0Dimm1 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyCh0Dimm1; |
| |
| /** Offset 0x0592 - Activate Energy Ch1Dimm0 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyCh1Dimm0; |
| |
| /** Offset 0x0593 - Activate Energy Ch1Dimm1 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyCh1Dimm1; |
| |
| /** Offset 0x0594 - Read Energy Ch0Dimm0 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyCh0Dimm0; |
| |
| /** Offset 0x0595 - Read Energy Ch0Dimm1 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyCh0Dimm1; |
| |
| /** Offset 0x0596 - Read Energy Ch1Dimm0 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyCh1Dimm0; |
| |
| /** Offset 0x0597 - Read Energy Ch1Dimm1 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyCh1Dimm1; |
| |
| /** Offset 0x0598 - Write Energy Ch0Dimm0 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyCh0Dimm0; |
| |
| /** Offset 0x0599 - Write Energy Ch0Dimm1 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyCh0Dimm1; |
| |
| /** Offset 0x059A - Write Energy Ch1Dimm0 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyCh1Dimm0; |
| |
| /** Offset 0x059B - Write Energy Ch1Dimm1 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyCh1Dimm1; |
| |
| /** Offset 0x059C - Throttler CKEMin Timer |
| Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). |
| Dfault is 0x30 |
| **/ |
| UINT8 ThrtCkeMinTmr; |
| |
| /** Offset 0x059D - Cke Rank Mapping |
| Bits [7:4] - Channel 1, bits [3:0] - Channel 0. <b>0xAA=Default</b> Bit [i] specifies |
| which rank CKE[i] goes to. |
| **/ |
| UINT8 CkeRankMapping; |
| |
| /** Offset 0x059E - Rapl Power Floor Ch0 |
| Power budget ,range[255;0],(0= 5.3W Def) |
| **/ |
| UINT8 RaplPwrFlCh0; |
| |
| /** Offset 0x059F - Rapl Power Floor Ch1 |
| Power budget ,range[255;0],(0= 5.3W Def) |
| **/ |
| UINT8 RaplPwrFlCh1; |
| |
| /** Offset 0x05A0 - Command Rate Support |
| CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs |
| 0:Disable, 1:1 CMD, 2:2 CMDS, 3:3 CMDS, 4:4 CMDS, 5:5 CMDS, 6:6 CMDS, 7:7 CMDS |
| **/ |
| UINT8 EnCmdRate; |
| |
| /** Offset 0x05A1 - REFRESH_2X_MODE |
| 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot |
| 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only |
| **/ |
| UINT8 Refresh2X; |
| |
| /** Offset 0x05A2 - Energy Performance Gain |
| Enable/disable(default) Energy Performance Gain. |
| $EN_DIS |
| **/ |
| UINT8 EpgEnable; |
| |
| /** Offset 0x05A3 - Row Hammer Solution |
| Type of method used to prevent Row Hammer. Default is 2x Refresh |
| 0:Hardware RHP, 1:2x Refresh |
| **/ |
| UINT8 RhSolution; |
| |
| /** Offset 0x05A4 - User Manual Threshold |
| Disabled: Predefined threshold will be used.\n |
| Enabled: User Input will be used. |
| $EN_DIS |
| **/ |
| UINT8 UserThresholdEnable; |
| |
| /** Offset 0x05A5 - User Manual Budget |
| Disabled: Configuration of memories will defined the Budget value.\n |
| Enabled: User Input will be used. |
| $EN_DIS |
| **/ |
| UINT8 UserBudgetEnable; |
| |
| /** Offset 0x05A6 - Power Down Mode |
| This option controls command bus tristating during idle periods |
| 0x0:No Power Down, 0x1:APD, 0x6:PPD DLL OFF, 0xFF:Auto |
| **/ |
| UINT8 PowerDownMode; |
| |
| /** Offset 0x05A7 - TcritMax |
| Maximum Critical Temperature in Centigrade of the On-DIMM Thermal Sensor. TCRITMax |
| has to be greater than THIGHMax .\n |
| Critical temperature will be TcritMax |
| **/ |
| UINT8 TsodTcritMax; |
| |
| /** Offset 0x05A8 - Event mode |
| Disable:Comparator mode.\n |
| Enable:Interrupt mode |
| $EN_DIS |
| **/ |
| UINT8 TsodEventMode; |
| |
| /** Offset 0x05A9 - EVENT polarity |
| Disable:Active LOW.\n |
| Enable:Active HIGH |
| $EN_DIS |
| **/ |
| UINT8 TsodEventPolarity; |
| |
| /** Offset 0x05AA - Critical event only |
| Disable:Trips on alarm or critical.\n |
| Enable:Trips only if criticaal temperature is reached |
| $EN_DIS |
| **/ |
| UINT8 TsodCriticalEventOnly; |
| |
| /** Offset 0x05AB - Event output control |
| Disable:Event output disable.\n |
| Enable:Event output enabled |
| $EN_DIS |
| **/ |
| UINT8 TsodEventOutputControl; |
| |
| /** Offset 0x05AC - Alarm window lock bit |
| Disable:Alarm trips are not locked and can be changed.\n |
| Enable:Alarm trips are locked and cannot be changed |
| $EN_DIS |
| **/ |
| UINT8 TsodAlarmwindowLockBit; |
| |
| /** Offset 0x05AD - Critical trip lock bit |
| Disable:Critical trip is not locked and can be changed.\n |
| Enable:Critical trip is locked and cannot be changed |
| $EN_DIS |
| **/ |
| UINT8 TsodCriticaltripLockBit; |
| |
| /** Offset 0x05AE - Shutdown mode |
| Disable:Temperature sensor enable.\n |
| Enable:Temperature sensor disable |
| $EN_DIS |
| **/ |
| UINT8 TsodShutdownMode; |
| |
| /** Offset 0x05AF - ThighMax |
| Thigh = ThighMax (Default is 93) |
| **/ |
| UINT8 TsodThigMax; |
| |
| /** Offset 0x05B0 - User Manual Thig and Tcrit |
| Disabled(Default): Temperature will be given by the configuration of memories and |
| 1x or 2xrefresh rate.\n |
| Enabled: User Input will define for Thigh and Tcrit. |
| $EN_DIS |
| **/ |
| UINT8 TsodManualEnable; |
| |
| /** Offset 0x05B1 - Force OLTM or 2X Refresh when needed |
| Disabled(Default): = Force OLTM.\n |
| Enabled: = Force 2x Refresh. |
| $EN_DIS |
| **/ |
| UINT8 ForceOltmOrRefresh2x; |
| |
| /** Offset 0x05B2 - Pwr Down Idle Timer |
| The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means |
| AUTO: 64 for ULX/ULT, 128 for DT/Halo |
| **/ |
| UINT8 PwdwnIdleCounter; |
| |
| /** Offset 0x05B3 - Page Close Idle Timeout |
| This option controls Page Close Idle Timeout |
| 0:Enabled, 1:Disabled |
| **/ |
| UINT8 DisPgCloseIdleTimeout; |
| |
| /** Offset 0x05B4 - Bitmask of ranks that have CA bus terminated |
| Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default, |
| Rank0 is terminating and Rank1 is non-terminating</b> |
| **/ |
| UINT8 CmdRanksTerminated; |
| |
| /** Offset 0x05B5 - RMTLoopCount |
| Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO |
| **/ |
| UINT8 RMTLoopCount; |
| |
| /** Offset 0x05B6 - Throttler CKEMin Timer for LPDDR |
| LPDDR Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH |
| (4). Dfault is 0x40 |
| **/ |
| UINT8 ThrtCkeMinTmrLpddr; |
| |
| /** Offset 0x05B7 - Retrain on Fast Fail |
| Restart MRC in Cold mode if SW MemTest fails during Fast flow. Default = Enabled |
| $EN_DIS |
| **/ |
| UINT8 RetrainOnFastFail; |
| |
| /** Offset 0x05B8 - Rank Margin Tool Per Bit |
| Enable/disable Rank Margin Tool Per Bit. |
| $EN_DIS |
| **/ |
| UINT8 RMTBIT; |
| |
| /** Offset 0x05B9 - Read Timing Optimization |
| Enables/Disable Read Timing Optimization |
| $EN_DIS |
| **/ |
| UINT8 RDTOPT; |
| |
| /** Offset 0x05BA - REFRESH_PANIC_WM |
| Refresh Panic Watermark, range 1-9, Default is 9 |
| **/ |
| UINT8 RefreshPanicWm; |
| |
| /** Offset 0x05BB - REFRESH_HP_WM |
| Refresh High Priority Watermark, range 1-9, Default is 8 |
| **/ |
| UINT8 RefreshHpWm; |
| |
| /** Offset 0x05BC - PcdSerialDebugLevel |
| Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, |
| Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, |
| Info & Verbose. |
| 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load |
| Error Warnings and Info, 5:Load Error Warnings Info and Verbose |
| **/ |
| UINT8 PcdSerialDebugLevel; |
| |
| /** Offset 0x05BD - Fivr Faults |
| Fivr Faults; 0: Disabled; <b>1: Enabled.</b> |
| $EN_DIS |
| **/ |
| UINT8 FivrFaults; |
| |
| /** Offset 0x05BE - Fivr Efficiency |
| Fivr Efficiency Management; 0: Disabled; <b>1: Enabled.</b> |
| $EN_DIS |
| **/ |
| UINT8 FivrEfficiency; |
| |
| /** Offset 0x05BF - Safe Mode Support |
| This option configures the varous items in the IO and MC to be more conservative.(def=Disable) |
| $EN_DIS |
| **/ |
| UINT8 SafeMode; |
| |
| /** Offset 0x05C0 - Ask MRC to clear memory content |
| Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory. |
| $EN_DIS |
| **/ |
| UINT8 CleanMemory; |
| |
| /** Offset 0x05C1 - TCSS USB Port Enable |
| Bitmap for per port enabling |
| **/ |
| UINT8 UsbTcPortEnPreMem; |
| |
| /** Offset 0x05C2 - Post Code Output Port |
| This option configures Post Code Output Port |
| **/ |
| UINT16 PostCodeOutputPort; |
| |
| /** Offset 0x05C4 - Enable/Disable SA CRID |
| Enable: SA CRID, Disable (Default): SA CRID |
| $EN_DIS |
| **/ |
| UINT8 CridEnable; |
| |
| /** Offset 0x05C5 |
| **/ |
| UINT8 UnusedUpdSpace17[3]; |
| |
| /** Offset 0x05C8 - BCLK RFI Frequency |
| Bclk RFI Frequency for each SAGV point in Hz units. 98000000Hz = 98MHz <b>0 - No |
| RFI Tuning</b>. Range is 98Mhz-100Mhz. |
| **/ |
| UINT32 BclkRfiFreq[4]; |
| |
| /** Offset 0x05D8 - Size of PCIe IMR. |
| Size of PCIe IMR in megabytes |
| **/ |
| UINT16 PcieImrSize; |
| |
| /** Offset 0x05DA - Enable PCIe IMR |
| 0: Disable(AUTO), 1: Enable |
| $EN_DIS |
| **/ |
| UINT8 PcieImrEnabled; |
| |
| /** Offset 0x05DB - Enable PCIe IMR |
| 1: PCH PCIE, 2: SA PCIE. If PCIeImrEnabled is TRUE then this will use to select |
| the Root port location from PCH PCIe or SA PCIe |
| $EN_DIS |
| **/ |
| UINT8 PcieImrRpLocation; |
| |
| /** Offset 0x05DC - Root port number for IMR. |
| Root port number for IMR.If PCieImrRpLocation is PCH PCIe then select root port |
| from 0 to 23 and if it is SA PCIe then select root port from 0 to 3 |
| **/ |
| UINT8 PcieImrRpSelection; |
| |
| /** Offset 0x05DD - Mem Boot Mode |
| 0: BOOT_MODE_1LM(Default), 1: BOOT_MODE_2LM, 2: BOOT_MODE_PROVISION |
| 0: BOOT_MODE_1LM, 1: BOOT_MODE_2LM, 2: BOOT_MODE_PROVISION |
| **/ |
| UINT8 MemBootMode; |
| |
| /** Offset 0x05DE - PCIe ASPM programming will happen in relation to the Oprom |
| This option is specifically needed for ASPM configuration in 2LM feature |
| 0:Disabled, 1:L0, 2:L1, 3:L0L1, 4:Auto |
| **/ |
| UINT8 Peg3Aspm; |
| |
| /** Offset 0x05DF - MFVC WRR VC Arbitration |
| 0: DEFAULT_PHASES(Default), 1: PROGRAM_128PHASES |
| 0: DEFAULT_PHASES, 1: PROGRAM_128PHASES |
| **/ |
| UINT8 MfvcWrrArb; |
| |
| /** Offset 0x05E0 - VcId_7_0 values |
| Select VC ID for arbitration |
| **/ |
| UINT8 VcId_7_0[16]; |
| |
| /** Offset 0x05F0 - Set Hw Parameters enable/disable |
| 1: enable, 0: disable, Enable/disable setting of HW parameters |
| $EN_DIS |
| **/ |
| UINT8 SetHwParameters; |
| |
| /** Offset 0x05F1 |
| **/ |
| UINT8 UnusedUpdSpace18; |
| |
| /** Offset 0x05F2 - LTR L1.2 Threshold Value |
| LTR L1.2 Threshold Value |
| **/ |
| UINT16 Ltr_L1D2_ThVal; |
| |
| /** Offset 0x05F4 - LTR L1.2 Threshold Scale |
| LTR L1.2 Threshold Scale |
| **/ |
| UINT8 Ltr_L1D2_ThScale; |
| |
| /** Offset 0x05F5 - system power state |
| system power state indicates the platform power state |
| **/ |
| UINT8 SysPwrState; |
| |
| /** Offset 0x05F6 - Media Death Notification Enable/Disable |
| 1: enable, 0: disable, Enable/disable for Media Death Notification |
| $EN_DIS |
| **/ |
| UINT8 MediaDeathNotification; |
| |
| /** Offset 0x05F7 - Health Log Notification Enable/Disable |
| 1: enable, 0: disable, Enable/disable for Health Log Notification |
| $EN_DIS |
| **/ |
| UINT8 HealthLogNotification; |
| |
| /** Offset 0x05F8 - Temp crosses below TempThrottle Notification Enable/Disable |
| 1: enable, 0: disable, Enable/disable for Temp crosses below TempThrottle Notification |
| $EN_DIS |
| **/ |
| UINT8 TempBelowThrottleNotification; |
| |
| /** Offset 0x05F9 - Temp crosses above TempThrottle Notification Enable/Disable |
| 1: enable, 0: disable, Enable/disable for Temp crosses above TempThrottle Notification |
| $EN_DIS |
| **/ |
| UINT8 TempAboveThrottleNotification; |
| |
| /** Offset 0x05FA - Missing Commit Bit Notification Enable/Disable |
| 1: enable, 0: disable, Enable/disable for Missing Commit Bit Notification |
| $EN_DIS |
| **/ |
| UINT8 MissingCommitBitNotification; |
| |
| /** Offset 0x05FB - NVMeHoldDisableBit |
| 1: enable, 0: disable, Enable/disable for NVMeHoldDisableBit |
| $EN_DIS |
| **/ |
| UINT8 NVMeHoldDisableBit; |
| |
| /** Offset 0x05FC - PreMemRsvd |
| Reserved for Pre-Mem |
| $EN_DIS |
| **/ |
| UINT8 ReservedFspmUpd[18]; |
| |
| /** Offset 0x060E - Skip external display device scanning |
| Enable: Do not scan for external display device, Disable (Default): Scan external |
| display devices |
| $EN_DIS |
| **/ |
| UINT8 SkipExtGfxScan; |
| |
| /** Offset 0x060F - Generate BIOS Data ACPI Table |
| Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it |
| $EN_DIS |
| **/ |
| UINT8 BdatEnable; |
| |
| /** Offset 0x0610 - Detect External Graphics device for LegacyOpROM |
| Detect and report if external graphics device only support LegacyOpROM or not (to |
| support CSM auto-enable). Enable(Default)=1, Disable=0 |
| $EN_DIS |
| **/ |
| UINT8 ScanExtGfxForLegacyOpRom; |
| |
| /** Offset 0x0611 - Lock PCU Thermal Management registers |
| Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 |
| $EN_DIS |
| **/ |
| UINT8 LockPTMregs; |
| |
| /** Offset 0x0612 - Rsvd |
| Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): |
| Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE |
| peak values unmodified |
| $EN_DIS |
| **/ |
| UINT8 PegGen3Rsvd; |
| |
| /** Offset 0x0613 - Panel Power Enable |
| Control for enabling/disabling VDD force bit (Required only for early enabling of |
| eDP panel). 0=Disable, 1(Default)=Enable |
| $EN_DIS |
| **/ |
| UINT8 PanelPowerEnable; |
| |
| /** Offset 0x0614 - BdatTestType |
| Indicates the type of Memory Training data to populate into the BDAT ACPI table. |
| 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D |
| **/ |
| UINT8 BdatTestType; |
| |
| /** Offset 0x0615 - SaPreMemTestRsvd |
| Reserved for SA Pre-Mem Test |
| $EN_DIS |
| **/ |
| UINT8 SaPreMemTestRsvd[98]; |
| |
| /** Offset 0x0677 |
| **/ |
| UINT8 UnusedUpdSpace19; |
| |
| /** Offset 0x0678 - TotalFlashSize |
| Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable |
| **/ |
| UINT16 TotalFlashSize; |
| |
| /** Offset 0x067A - BiosSize |
| Enable/Disable. 0: Disable, define default value of BiosSize , 1: enable |
| **/ |
| UINT16 BiosSize; |
| |
| /** Offset 0x067C - TxtAcheckRequest |
| Enable/Disable. When Enabled, it will forcing calling TXT Acheck once. |
| $EN_DIS |
| **/ |
| UINT8 TxtAcheckRequest; |
| |
| /** Offset 0x067D - SecurityTestRsvd |
| Reserved for SA Pre-Mem Test |
| $EN_DIS |
| **/ |
| UINT8 SecurityTestRsvd[11]; |
| |
| /** Offset 0x0688 - Smbus dynamic power gating |
| Disable or Enable Smbus dynamic power gating. |
| $EN_DIS |
| **/ |
| UINT8 SmbusDynamicPowerGating; |
| |
| /** Offset 0x0689 - Disable and Lock Watch Dog Register |
| Set 1 to clear WDT status, then disable and lock WDT registers. |
| $EN_DIS |
| **/ |
| UINT8 WdtDisableAndLock; |
| |
| /** Offset 0x068A - SMBUS SPD Write Disable |
| Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write |
| Disable bit. For security recommendations, SPD write disable bit must be set. |
| $EN_DIS |
| **/ |
| UINT8 SmbusSpdWriteDisable; |
| |
| /** Offset 0x068B - VC Type |
| Virtual Channel Type Select: 0: VC0, 1: VC1. |
| 0: VC0, 1: VC1 |
| **/ |
| UINT8 PchHdaVcType; |
| |
| /** Offset 0x068C - Universal Audio Architecture compliance for DSP enabled system |
| 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox |
| driver or SST driver supported). |
| $EN_DIS |
| **/ |
| UINT8 PchHdaDspUaaCompliance; |
| |
| /** Offset 0x068D - Enable HD Audio Link |
| Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. |
| $EN_DIS |
| **/ |
| UINT8 PchHdaAudioLinkHdaEnable; |
| |
| /** Offset 0x068E - Enable HDA SDI lanes |
| Enable/disable HDA SDI lanes. |
| **/ |
| UINT8 PchHdaSdiEnable[2]; |
| |
| /** Offset 0x0690 - HDA Power/Clock Gating (PGD/CGD) |
| Enable/Disable HD Audio Power and Clock Gating(POR: Enable). 0: PLATFORM_POR, 1: |
| FORCE_ENABLE, 2: FORCE_DISABLE. |
| 0: POR, 1: Force Enable, 2: Force Disable |
| **/ |
| UINT8 PchHdaTestPowerClockGating; |
| |
| /** Offset 0x0691 - Enable HD Audio DMIC_N Link |
| Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. |
| **/ |
| UINT8 PchHdaAudioLinkDmicEnable[2]; |
| |
| /** Offset 0x0693 |
| **/ |
| UINT8 UnusedUpdSpace20[1]; |
| |
| /** Offset 0x0694 - DMIC<N> ClkA Pin Muxing (N - DMIC number) |
| Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKA_* |
| **/ |
| UINT32 PchHdaAudioLinkDmicClkAPinMux[2]; |
| |
| /** Offset 0x069C - DMIC<N> ClkB Pin Muxing |
| Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKB_* |
| **/ |
| UINT32 PchHdaAudioLinkDmicClkBPinMux[2]; |
| |
| /** Offset 0x06A4 - Enable HD Audio DSP |
| Enable/disable HD Audio DSP feature. |
| $EN_DIS |
| **/ |
| UINT8 PchHdaDspEnable; |
| |
| /** Offset 0x06A5 |
| **/ |
| UINT8 UnusedUpdSpace21[3]; |
| |
| /** Offset 0x06A8 - DMIC<N> Data Pin Muxing |
| Determines DMIC<N> Data Pin muxing. See GPIO_*_MUXING_DMIC<N>_DATA_* |
| **/ |
| UINT32 PchHdaAudioLinkDmicDataPinMux[2]; |
| |
| /** Offset 0x06B0 - Enable HD Audio SSP0 Link |
| Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5 |
| **/ |
| UINT8 PchHdaAudioLinkSspEnable[6]; |
| |
| /** Offset 0x06B6 - Enable HD Audio SoundWire#N Link |
| Enable/disable HD Audio SNDW#N link. Muxed with HDA. |
| **/ |
| UINT8 PchHdaAudioLinkSndwEnable[4]; |
| |
| /** Offset 0x06BA - iDisp-Link Frequency |
| iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz. |
| 4: 96MHz, 3: 48MHz |
| **/ |
| UINT8 PchHdaIDispLinkFrequency; |
| |
| /** Offset 0x06BB - iDisp-Link T-mode |
| iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T, 4: 16T |
| 0: 2T, 2: 4T, 3: 8T, 4: 16T |
| **/ |
| UINT8 PchHdaIDispLinkTmode; |
| |
| /** Offset 0x06BC - iDisplay Audio Codec disconnection |
| 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. |
| $EN_DIS |
| **/ |
| UINT8 PchHdaIDispCodecDisconnect; |
| |
| /** Offset 0x06BD - Tcc Tuning enable/disable |
| Tcc (Time Coordinated Computing) Tuning Enabled |
| $EN_DIS |
| **/ |
| UINT8 TccTuningEnable; |
| |
| /** Offset 0x06BE |
| **/ |
| UINT8 UnusedUpdSpace22[2]; |
| |
| /** Offset 0x06C0 - Tcc Register File Base Address |
| Tcc (Time Coordinated Computing) Register File Base Address |
| **/ |
| UINT32 TccConfigBase; |
| |
| /** Offset 0x06C4 - Tcc Register File Size |
| Tcc (Time Coordinated Computing) Register File Size |
| **/ |
| UINT32 TccConfigSize; |
| |
| /** Offset 0x06C8 - Force ME DID Init Status |
| Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set |
| ME DID init stat value |
| $EN_DIS |
| **/ |
| UINT8 DidInitStat; |
| |
| /** Offset 0x06C9 - CPU Replaced Polling Disable |
| Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop |
| $EN_DIS |
| **/ |
| UINT8 DisableCpuReplacedPolling; |
| |
| /** Offset 0x06CA - ME DID Message |
| Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable will prevent |
| the DID message from being sent) |
| $EN_DIS |
| **/ |
| UINT8 SendDidMsg; |
| |
| /** Offset 0x06CB - Check HECI message before send |
| Test, 0: disable, 1: enable, Enable/Disable message check. |
| $EN_DIS |
| **/ |
| UINT8 DisableMessageCheck; |
| |
| /** Offset 0x06CC - Skip MBP HOB |
| Test, 0: disable, 1: enable, Enable/Disable MOB HOB. |
| $EN_DIS |
| **/ |
| UINT8 SkipMbpHob; |
| |
| /** Offset 0x06CD - HECI2 Interface Communication |
| Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. |
| $EN_DIS |
| **/ |
| UINT8 HeciCommunication2; |
| |
| /** Offset 0x06CE - Enable KT device |
| Test, 0: disable, 1: enable, Enable or Disable KT device. |
| $EN_DIS |
| **/ |
| UINT8 KtDeviceEnable; |
| |
| /** Offset 0x06CF |
| **/ |
| UINT8 UnusedUpdSpace23[5]; |
| |
| /** Offset 0x06D4 |
| **/ |
| UINT8 ReservedFspmUpd2[20]; |
| } FSP_M_CONFIG; |
| |
| /** Fsp M UPD Configuration |
| **/ |
| typedef struct { |
| |
| /** Offset 0x0000 |
| **/ |
| FSP_UPD_HEADER FspUpdHeader; |
| |
| /** Offset 0x0020 |
| **/ |
| FSPM_ARCH_UPD FspmArchUpd; |
| |
| /** Offset 0x0040 |
| **/ |
| FSP_M_CONFIG FspmConfig; |
| |
| /** Offset 0x06E8 |
| **/ |
| UINT8 UnusedUpdSpace24[6]; |
| |
| /** Offset 0x06EE |
| **/ |
| UINT16 UpdTerminator; |
| } FSPM_UPD; |
| |
| #pragma pack() |
| |
| #endif |