| config SOC_INTEL_COMMON_SKYLAKE_BASE |
| bool |
| |
| config SOC_INTEL_SKYLAKE |
| bool |
| select SOC_INTEL_COMMON_SKYLAKE_BASE |
| help |
| Intel Skylake support |
| |
| config SOC_INTEL_KABYLAKE |
| bool |
| select SOC_INTEL_COMMON_SKYLAKE_BASE |
| help |
| Intel Kabylake support |
| |
| if SOC_INTEL_COMMON_SKYLAKE_BASE |
| |
| config CPU_SPECIFIC_OPTIONS |
| def_bool y |
| select ACPI_INTEL_HARDWARE_SLEEP_VALUES |
| select ACPI_NHLT |
| select ARCH_BOOTBLOCK_X86_32 |
| select ARCH_RAMSTAGE_X86_32 |
| select ARCH_ROMSTAGE_X86_32 |
| select ARCH_VERSTAGE_X86_32 |
| select BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY if BOOT_DEVICE_SPI_FLASH |
| select BOOT_DEVICE_SUPPORTS_WRITES |
| select CACHE_MRC_SETTINGS |
| select COMMON_FADT |
| select CPU_INTEL_COMMON |
| select CPU_INTEL_FIRMWARE_INTERFACE_TABLE |
| select CPU_INTEL_COMMON_HYPERTHREADING |
| select FSP_M_XIP |
| select GENERIC_GPIO_LIB |
| select HAVE_FSP_GOP |
| select INTEL_DESCRIPTOR_MODE_CAPABLE |
| select HAVE_SMI_HANDLER |
| select INTEL_CAR_NEM_ENHANCED |
| select INTEL_GMA_ACPI |
| select INTEL_GMA_ADD_VBT if RUN_FSP_GOP |
| select IOAPIC |
| select MRC_SETTINGS_PROTECT |
| select NO_FIXED_XIP_ROM_SIZE |
| select PARALLEL_MP |
| select PARALLEL_MP_AP_WORK |
| select PCIEX_LENGTH_64MB |
| select PLATFORM_USES_FSP2_0 |
| select REG_SCRIPT |
| select SA_ENABLE_DPR |
| select SMP |
| select PMC_GLOBAL_RESET_ENABLE_LOCK |
| select SOC_INTEL_COMMON |
| select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE |
| select SOC_INTEL_COMMON_BLOCK |
| select SOC_INTEL_COMMON_BLOCK_CAR |
| select SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG |
| select SOC_INTEL_COMMON_BLOCK_CPU |
| select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT |
| select SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT |
| select SOC_INTEL_COMMON_BLOCK_GPIO_LEGACY_MACROS |
| select SOC_INTEL_COMMON_BLOCK_GPIO_PADCFG_PADTOL |
| select SOC_INTEL_COMMON_BLOCK_GSPI |
| select SOC_INTEL_COMMON_BLOCK_HDA |
| select SOC_INTEL_COMMON_BLOCK_SA |
| select SOC_INTEL_COMMON_BLOCK_SGX |
| select SOC_INTEL_COMMON_BLOCK_SGX_LOCK_MEMORY |
| select SOC_INTEL_COMMON_BLOCK_SMM |
| select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP |
| select SOC_INTEL_COMMON_BLOCK_UART |
| select SOC_INTEL_COMMON_BLOCK_XHCI_ELOG |
| select SOC_INTEL_COMMON_PCH_BASE |
| select SOC_INTEL_COMMON_NHLT |
| select SOC_INTEL_COMMON_RESET |
| select SSE2 |
| select SUPPORT_CPU_UCODE_IN_CBFS |
| select TSC_MONOTONIC_TIMER |
| select TSC_SYNC_MFENCE |
| select UDELAY_TSC |
| select UDK_2015_BINDING |
| |
| config FSP_HYPERTHREADING |
| bool "Enable Hyper-Threading" |
| default y |
| |
| config CPU_INTEL_NUM_FIT_ENTRIES |
| int |
| default 10 |
| |
| config CHROMEOS |
| select CHROMEOS_RAMOOPS_DYNAMIC |
| |
| config VBOOT |
| select VBOOT_SEPARATE_VERSTAGE |
| select VBOOT_MUST_REQUEST_DISPLAY |
| select VBOOT_SAVE_RECOVERY_REASON_ON_REBOOT |
| select VBOOT_STARTS_IN_BOOTBLOCK |
| select VBOOT_VBNV_CMOS |
| select VBOOT_VBNV_CMOS_BACKUP_TO_FLASH |
| |
| config CBFS_SIZE |
| hex |
| default 0x200000 |
| |
| config DCACHE_RAM_BASE |
| hex |
| default 0xfef00000 |
| |
| config DCACHE_RAM_SIZE |
| hex |
| default 0x40000 |
| help |
| The size of the cache-as-ram region required during bootblock |
| and/or romstage. |
| |
| config DCACHE_BSP_STACK_SIZE |
| hex |
| default 0x4000 |
| help |
| The amount of anticipated stack usage in CAR by bootblock and |
| other stages. |
| |
| config C_ENV_BOOTBLOCK_SIZE |
| hex |
| default 0xC000 |
| |
| config EXCLUDE_NATIVE_SD_INTERFACE |
| bool |
| default n |
| help |
| If you set this option to n, will not use native SD controller. |
| |
| config HEAP_SIZE |
| hex |
| default 0x80000 |
| |
| config IED_REGION_SIZE |
| hex |
| default 0x400000 |
| |
| config PCR_BASE_ADDRESS |
| hex |
| default 0xfd000000 |
| help |
| This option allows you to select MMIO Base Address of sideband bus. |
| |
| config SMM_RESERVED_SIZE |
| hex |
| default 0x200000 |
| |
| config SMM_TSEG_SIZE |
| hex |
| default 0x800000 |
| |
| config VGA_BIOS_ID |
| string |
| default "8086,0406" |
| |
| config SKYLAKE_SOC_PCH_H |
| bool |
| default n |
| help |
| Choose this option if you have a PCH-H chipset. |
| |
| config NHLT_DMIC_2CH |
| bool |
| default n |
| help |
| Include DSP firmware settings for 2 channel DMIC array. |
| |
| config NHLT_DMIC_4CH |
| bool |
| default n |
| help |
| Include DSP firmware settings for 4 channel DMIC array. |
| |
| config NHLT_NAU88L25 |
| bool |
| default n |
| help |
| Include DSP firmware settings for nau88l25 headset codec. |
| |
| config NHLT_MAX98357 |
| bool |
| default n |
| help |
| Include DSP firmware settings for max98357 amplifier. |
| |
| config NHLT_MAX98373 |
| bool |
| default n |
| help |
| Include DSP firmware settings for max98373 amplifier. |
| |
| config NHLT_SSM4567 |
| bool |
| default n |
| help |
| Include DSP firmware settings for ssm4567 smart amplifier. |
| |
| config NHLT_RT5514 |
| bool |
| default n |
| help |
| Include DSP firmware settings for rt5514 DSP. |
| |
| config NHLT_RT5663 |
| bool |
| default n |
| help |
| Include DSP firmware settings for rt5663 headset codec. |
| |
| config NHLT_MAX98927 |
| bool |
| default n |
| help |
| Include DSP firmware settings for max98927 amplifier. |
| |
| config NHLT_DA7219 |
| bool |
| default n |
| help |
| Include DSP firmware settings for DA7219 headset codec. |
| |
| config FSP_HEADER_PATH |
| string "Location of FSP headers" |
| # Use KabylakeFsp for both Skylake and Kabylake as it supports both. |
| # SkylakeFsp is FSP 1.1 and therefore incompatible. |
| default "3rdparty/fsp/KabylakeFspBinPkg/Include/" |
| |
| config FSP_FD_PATH |
| string |
| depends on FSP_USE_REPO |
| default "3rdparty/fsp/KabylakeFspBinPkg/Fsp.fd" |
| |
| config SPI_FLASH_INCLUDE_ALL_DRIVERS |
| bool |
| default n |
| |
| config MAX_ROOT_PORTS |
| int |
| default 24 |
| |
| config NO_FADT_8042 |
| bool |
| default n |
| help |
| Choose this option if you want to disable 8042 Keyboard |
| |
| config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ |
| int |
| default 120 |
| |
| config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ |
| int |
| default SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ |
| |
| config SOC_INTEL_COMMON_BLOCK_GSPI_MAX |
| int |
| default 2 |
| |
| config SOC_INTEL_I2C_DEV_MAX |
| int |
| default 6 |
| |
| config CPU_BCLK_MHZ |
| int |
| default 100 |
| |
| config CONSOLE_UART_BASE_ADDRESS |
| hex |
| default 0xfe030000 |
| depends on INTEL_LPSS_UART_FOR_CONSOLE |
| |
| # Clock divider parameters for 115200 baud rate |
| config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL |
| hex |
| default 0x30 |
| |
| config SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL |
| hex |
| default 0xc35 |
| |
| config IFD_CHIPSET |
| string |
| default "sklkbl" |
| |
| config INTEL_TXT_BIOSACM_ALIGNMENT |
| hex |
| default 0x40000 # 256KB |
| |
| endif |