| chip northbridge/amd/gx2 |
| register "irqmap" = "0xaa5b" |
| register "setupflash" = "0" |
| device apic_cluster 0 on |
| chip cpu/amd/model_gx2 |
| device apic 0 on end |
| end |
| end |
| device pci_domain 0 on |
| device pci 1.0 on end |
| device pci 1.1 on end |
| chip southbridge/amd/cs5536 |
| # 0x51400025 (IRQ Mapper LPC Mask)= 0x00001002 |
| # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK |
| # 0x5140004E (LPC Serial IRQ Control) = 0xEFFD0080. |
| # Frame Pulse Width = 4clocks |
| # IRQ Data Frames = 17Frames |
| # SIRQ Mode = continous , It would be better if the EC could operate in |
| # Active(Quiet) mode. Save power.... |
| # SIRQ Enable = Enabled |
| # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK |
| #register "lpc_irq" = "0x00001002" |
| #register "lpc_serirq_enable" = "0xEFFD0080" |
| #register "enable_gpio0_inta" = "1" |
| #register "enable_ide_nand_flash" = "1" |
| #register "enable_uarta" = "1" |
| #register "enable_USBP4_host" = "1" |
| #register "audio_irq" = "5" |
| #register "usbf4_irq" = "10" |
| #register "usbf5_irq" = "10" |
| #register "usbf6_irq" = "0" |
| #register "usbf7_irq" = "0" |
| device pci d.0 on end # Realtek 8139 LAN |
| device pci f.0 on end # ISA Bridge |
| device pci f.2 on end # IDE Controller |
| device pci f.3 on end # Audio |
| device pci f.4 on end # OHCI |
| device pci f.5 on end # EHCI |
| register "unwanted_vpci[0]" = "0x80007E00" # USB/UDC |
| register "unwanted_vpci[1]" = "0x80007F00" # USB/OTG |
| register "unwanted_vpci[2]" = "0" # End of list has a zero |
| end |
| end |
| end |
| |