Kconfig!
Works on Kontron, qemu, and serengeti.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
tested on abuild only.
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/mainboard/via/Kconfig b/src/mainboard/via/Kconfig
new file mode 100644
index 0000000..ba0f11b
--- /dev/null
+++ b/src/mainboard/via/Kconfig
@@ -0,0 +1,37 @@
+choice
+ prompt "Mainboard model"
+ depends on VENDOR_VIA
+
+config BOARD_VIA_VT8454C
+ bool "vt8454c"
+ select ARCH_X86
+ select CPU_VIA_C7
+ select NORTHBRIDGE_VIA_CX700
+# select SOUTHBRIDGE_INTEL_I82801GX
+ select SUPERIO_VIA_VT1211
+ select PIRQ_TABLE
+# select MMCONF_SUPPORT
+ select USE_PRINTK_IN_CAR
+ help
+ Kontron 986LCD-M Series mainboards
+endchoice
+
+config MAINBOARD_DIR
+ string
+ default via/vt8454c
+ depends on BOARD_VIA_VT8454C
+
+config DCACHE_RAM_BASE
+ hex
+ default 0xffef0000
+ depends on BOARD_VIA_VT8454C
+
+config DCACHE_RAM_SIZE
+ hex
+ default 0x8000
+ depends on BOARD_VIA_VT8454C
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "VT8454C"
+ depends on BOARD_VIA_VT8454C
diff --git a/src/mainboard/via/epia-cn/devicetree.cb b/src/mainboard/via/epia-cn/devicetree.cb
new file mode 100644
index 0000000..6425239
--- /dev/null
+++ b/src/mainboard/via/epia-cn/devicetree.cb
@@ -0,0 +1,61 @@
+chip northbridge/via/cn700 # Northbridge
+ device pci_domain 0 on # PCI domain
+ device pci 0.0 on end # AGP Bridge
+ device pci 0.1 on end # Error Reporting
+ device pci 0.2 on end # Host Bus Control
+ device pci 0.3 on end # Memory Controller
+ device pci 0.4 on end # Power Management
+ device pci 0.7 on end # V-Link Controller
+ device pci 1.0 on end # PCI Bridge
+ chip southbridge/via/vt8237r # Southbridge
+ # Enable both IDE channels.
+ register "ide0_enable" = "1"
+ register "ide1_enable" = "1"
+ # Both cables are 40pin.
+ register "ide0_80pin_cable" = "0"
+ register "ide1_80pin_cable" = "0"
+ device pci f.0 on end # IDE
+ register "fn_ctrl_lo" = "0x80"
+ register "fn_ctrl_hi" = "0x1d"
+ device pci 10.0 on end # OHCI
+ device pci 10.1 on end # OHCI
+ device pci 10.2 on end # OHCI
+ device pci 10.3 on end # OHCI
+ device pci 10.4 on end # EHCI
+ device pci 10.5 on end # UDCI
+ device pci 11.0 on # Southbridge LPC
+ chip superio/via/vt1211 # Super I/O
+ device pnp 2e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 on # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ drq 0x74 = 3
+ end
+ device pnp 2e.2 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 on # COM2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.b on # HWM
+ io 0x60 = 0xec00
+ end
+ end
+ end
+ device pci 11.5 on end # AC'97 audio
+ # device pci 11.6 off end # AC'97 Modem
+ device pci 12.0 on end # Ethernet
+ end
+ end
+ device apic_cluster 0 on # APIC cluster
+ chip cpu/via/model_c7 # VIA C7
+ device apic 0 on end # APIC
+ end
+ end
+end
diff --git a/src/mainboard/via/epia-m/devicetree.cb b/src/mainboard/via/epia-m/devicetree.cb
new file mode 100644
index 0000000..2b9abec
--- /dev/null
+++ b/src/mainboard/via/epia-m/devicetree.cb
@@ -0,0 +1,57 @@
+chip northbridge/via/vt8623
+
+ device apic_cluster 0 on
+ chip cpu/via/model_c3
+ device apic 0 on end
+ end
+ end
+
+ device pci_domain 0 on
+ chip southbridge/via/vt8235
+
+ device pci 10.0 on end # USB 1.1
+ device pci 10.1 on end # USB 1.1
+ device pci 10.2 on end # USB 1.1
+ device pci 10.3 on end # USB 2
+
+ device pci 11.0 on # Southbridge
+ chip superio/via/vt1211
+ device pnp 2e.0 on # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 on # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ drq 0x74 = 3
+ end
+ device pnp 2e.2 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 on # COM2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.b on # HWM
+ io 0x60 = 0xec00
+ end
+
+ end
+ end
+
+ device pci 11.1 on end # IDE
+ # 2-4 non existant?
+ device pci 11.5 on end # AC97 Audio
+ device pci 11.6 off end # AC97 Modem
+ device pci 12.0 on end # Ethernet
+ end
+# This is on the EPIA MII, not the M.
+ chip southbridge/ricoh/rl5c476
+ register "enable_cf" = "1"
+ device pci 0a.0 on end
+ device pci 0a.1 on end
+ end
+ end
+end
diff --git a/src/mainboard/via/epia-m700/devicetree.cb b/src/mainboard/via/epia-m700/devicetree.cb
new file mode 100644
index 0000000..008399a
--- /dev/null
+++ b/src/mainboard/via/epia-m700/devicetree.cb
@@ -0,0 +1,24 @@
+chip northbridge/via/vx800 # Northbridge
+ device pci_domain 0 on
+ device pci 0.0 on end # AGP Bridge
+ device pci 0.1 on end # Error Reporting
+ device pci 0.2 on end # Host Bus Control
+ device pci 0.3 on end # Memory Controller
+ device pci 0.4 on end # Power Management
+ device pci 0.7 on end # V-Link Controller
+ device pci 1.0 on end # PCI Bridge
+ # device pci f.0 on end # IDE/SATA
+ # device pci f.1 on end # IDE
+ # device pci 10.0 on end # USB 1.1
+ # device pci 10.1 on end # USB 1.1
+ # device pci 10.2 on end # USB 1.1
+ # device pci 10.4 on end # USB 2.0
+ # device pci 11.0 on # Southbridge LPC
+ # end
+ end
+ device apic_cluster 0 on # APIC cluster
+ chip cpu/via/model_c7 # VIA C7
+ device apic 0 on end # APIC
+ end
+ end
+end
diff --git a/src/mainboard/via/epia/devicetree.cb b/src/mainboard/via/epia/devicetree.cb
new file mode 100644
index 0000000..b75ee58
--- /dev/null
+++ b/src/mainboard/via/epia/devicetree.cb
@@ -0,0 +1,65 @@
+chip northbridge/via/vt8601
+ device pci_domain 0 on
+ device pci 0.0 on end # Northbridge
+# device pci 0.1 on # AGP bridge
+ # chip drivers/pci/onboard # Integrated VGA
+ # device pci 0.0 on end
+ # register "rom_adress" = "0xfff80000"
+ # end
+# end
+ chip southbridge/via/vt8231
+ register "enable_native_ide" = "0"
+ register "enable_com_ports" = "1"
+ register "enable_keyboard" = "0"
+ device pci 11.0 on # Southbrdge
+ chip superio/winbond/w83627hf
+ device pnp 2e.0 on # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.2 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ register "com1" = "{CONFIG_TTYS0_BAUD}"
+ end
+ device pnp 2e.6 off end # CIR
+ device pnp 2e.7 off end # GAME_MIDI_GIPO1
+ device pnp 2e.8 off end # GPIO2
+ device pnp 2e.9 off end # GPIO3
+ device pnp 2e.a off end # ACPI
+ device pnp 2e.b on # HW Monitor
+ io 0x60 = 0x290
+ end
+ end
+ device pci 11.1 on end # Ide
+ device pci 11.2 off end # Usb port 0-1
+ device pci 11.3 off end # Usb port 2-3
+ device pci 11.4 off end # ACPI
+ device pci 11.5 off end # AC97 Audio
+ device pci 11.6 on end # AC97 Modem
+ device pci 12.0 on end # Ethernet
+ end
+ end
+
+ device apic_cluster 0 on
+ chip cpu/via/model_c3
+ device apic 0 on end
+ end
+ end
+end
diff --git a/src/mainboard/via/pc2500e/devicetree.cb b/src/mainboard/via/pc2500e/devicetree.cb
new file mode 100644
index 0000000..c03d000
--- /dev/null
+++ b/src/mainboard/via/pc2500e/devicetree.cb
@@ -0,0 +1,88 @@
+chip northbridge/via/cn700 # Northbridge
+ device pci_domain 0 on # PCI domain
+ device pci 0.0 on end # AGP Bridge
+ device pci 0.1 on end # Error Reporting
+ device pci 0.2 on end # Host Bus Control
+ device pci 0.3 on end # Memory Controller
+ device pci 0.4 on end # Power Management
+ device pci 0.7 on end # V-Link Controller
+ device pci 1.0 on end # PCI Bridge
+ chip southbridge/via/vt8237r # Southbridge
+ # Enable both IDE channels.
+ register "ide0_enable" = "1"
+ register "ide1_enable" = "1"
+ # Both cables are 40pin.
+ register "ide0_80pin_cable" = "0"
+ register "ide1_80pin_cable" = "0"
+ device pci f.0 on end # SATA
+ device pci f.1 on end # IDE
+ register "fn_ctrl_lo" = "0x80"
+ register "fn_ctrl_hi" = "0x1d"
+ device pci 10.0 on end # UHCI
+ device pci 10.1 on end # UHCI
+ device pci 10.2 on end # UHCI
+ device pci 10.3 on end # UHCI
+ device pci 10.4 on end # EHCI
+ device pci 10.5 on end # UDCI
+ device pci 11.0 on # Southbridge LPC
+ chip superio/ite/it8716f # Super I/O
+ device pnp 2e.0 on # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.2 off # COM2 (N/A on this board)
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.3 on # Parallel port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ drq 0x74 = 3
+ end
+ device pnp 2e.4 on # Environment controller
+ io 0x60 = 0x290
+ io 0x62 = 0x0000
+ irq 0x70 = 9
+ end
+ device pnp 2e.5 off # PS/2 keyboard (not used)
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end
+ device pnp 2e.6 off # PS/2 mouse (not used)
+ irq 0x70 = 12
+ end
+ device pnp 2e.7 on # GPIO
+ io 0x60 = 0x0000
+ io 0x62 = 0x0800
+ io 0x64 = 0x0000
+ end
+ device pnp 2e.8 off # MIDI port (N/A)
+ io 0x60 = 0x300
+ irq 0x70 = 10
+ end
+ device pnp 2e.9 off # Game port (N/A)
+ io 0x60 = 0x201
+ end
+ device pnp 2e.a on # Consumer IR
+ io 0x60 = 0x310
+ irq 0x70 = 11
+ end
+ end
+ end
+ device pci 11.5 on end # AC'97 audio
+ # device pci 11.6 off end # AC'97 modem (N/A)
+ device pci 12.0 on end # Ethernet
+ end
+ end
+ device apic_cluster 0 on # APIC cluster
+ chip cpu/via/model_c7 # VIA C7
+ device apic 0 on end # APIC
+ end
+ end
+end
diff --git a/src/mainboard/via/vt8454c/Makefile.inc b/src/mainboard/via/vt8454c/Makefile.inc
new file mode 100644
index 0000000..d74c632
--- /dev/null
+++ b/src/mainboard/via/vt8454c/Makefile.inc
@@ -0,0 +1,64 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007-2009 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; version 2 of
+## the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+## MA 02110-1301 USA
+##
+
+##
+## This mainboard requires DCACHE_AS_RAM enabled. It won't work without.
+##
+
+driver-y += mainboard.o
+
+obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o
+obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o
+obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o
+obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o
+obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o
+
+initobj-y += crt0.o
+# FIXME in $(top)/Makefile
+crt0-y += ../../../../src/cpu/x86/16bit/entry16.inc
+crt0-y += ../../../../src/cpu/x86/32bit/entry32.inc
+crt0-y += ../../../../src/cpu/x86/16bit/reset16.inc
+crt0-y += ../../../../src/arch/i386/lib/id.inc
+crt0-y += ../../../../src/cpu/via/car/cache_as_ram.inc
+crt0-y += auto.inc
+
+ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb
+ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds
+ldscript-y += ../../../../src/cpu/x86/16bit/reset16.lds
+ldscript-y += ../../../../src/arch/i386/lib/id.lds
+ldscript-y += ../../../../src/arch/i386/lib/failover.lds
+
+ifdef POST_EVALUATION
+
+$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl
+ iasl -p dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl
+ mv dsdt.hex $@
+
+$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c
+ $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@
+
+$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/auto.c $(obj)/option_table.h
+ $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/auto.c -o $@
+ perl -e 's/\.rodata/.rom.data/g' -pi $@
+ perl -e 's/\.text/.section .rom.text/g' -pi $@
+
+endif
+
diff --git a/src/mainboard/via/vt8454c/devicetree.cb b/src/mainboard/via/vt8454c/devicetree.cb
new file mode 100644
index 0000000..02f9514
--- /dev/null
+++ b/src/mainboard/via/vt8454c/devicetree.cb
@@ -0,0 +1,59 @@
+chip northbridge/via/cx700
+ device apic_cluster 0 on
+ chip cpu/via/model_c7
+ device apic 0 on end
+ end
+ end
+ device pci_domain 0 on
+ device pci 0.0 on end # AGP Bridge
+ device pci 0.1 on end # Error Reporting
+ device pci 0.2 on end # Host Bus Control
+ device pci 0.3 on end # Memory Controller
+ device pci 0.4 on end # Power Management
+ device pci 0.7 on end # V-Link Controller
+ device pci 1.0 on # PCI Bridge
+ chip drivers/pci/onboard
+ device pci 0.0 on end
+ #register "rom_address" = "0xfffc0000" #256k image
+ register "rom_address" = "0xfff80000" #512k image
+ #register "rom_address" = "0xfff00000" #1024k image
+ end # Onboard Video
+ end # PCI Bridge
+ device pci f.0 on end # IDE/SATA
+ #device pci f.1 on end # IDE
+ device pci 10.0 on end # USB 1.1
+ device pci 10.1 on end # USB 1.1
+ device pci 10.2 on end # USB 1.1
+ device pci 10.4 on end # USB 2.0
+ device pci 11.0 on # Southbridge LPC
+ chip superio/via/vt1211
+ device pnp 2e.0 on # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 on # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ drq 0x74 = 3
+ end
+ device pnp 2e.2 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 on # COM2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.b on # HWM
+ io 0x60 = 0xec00
+ end
+ end # superio
+ end # pci 11.0
+ # 1-4 non existant
+ #device pci 11.5 on end # AC97 Audio
+ #device pci 11.6 off end # AC97 Modem
+ #device pci 12.0 on end # Ethernet
+ end # pci domain 0
+end # cx700
+