| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2006 AMD |
| * Written by Yinghai Lu <yinghailu@amd.com> for AMD. |
| * |
| * Copyright (C) 2006 MSI |
| * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #define ASSEMBLY 1 |
| #define __PRE_RAM__ |
| |
| #define RAMINIT_SYSINFO 1 |
| #define CACHE_AS_RAM_ADDRESS_DEBUG 0 |
| |
| #define SET_NB_CFG_54 1 |
| |
| //used by raminit |
| #define QRANK_DIMM_SUPPORT 1 |
| |
| //used by init_cpus and fidvid |
| #define K8_SET_FIDVID 1 |
| //if we want to wait for core1 done before DQS training, set it to 0 |
| #define K8_SET_FIDVID_CORE0_ONLY 1 |
| |
| #include <stdint.h> |
| #include <string.h> |
| #include <device/pci_def.h> |
| #include <arch/io.h> |
| #include <device/pnp_def.h> |
| #include <arch/romcc_io.h> |
| #include <cpu/x86/lapic.h> |
| #include "option_table.h" |
| #include "pc80/mc146818rtc_early.c" |
| #include "pc80/serial.c" |
| #include "arch/i386/lib/console.c" |
| |
| #include <cpu/amd/model_fxx_rev.h> |
| #include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" |
| #include "northbridge/amd/amdk8/raminit.h" |
| #include "cpu/amd/model_fxx/apic_timer.c" |
| #include "lib/delay.c" |
| |
| #include "cpu/x86/lapic/boot_cpu.c" |
| #include "northbridge/amd/amdk8/reset_test.c" |
| #include "northbridge/amd/amdk8/debug.c" |
| #include "superio/winbond/w83627ehg/w83627ehg_early_serial.c" |
| |
| #include "cpu/amd/mtrr/amd_earlymtrr.c" |
| #include "cpu/x86/bist.h" |
| |
| #include "northbridge/amd/amdk8/setup_resource_map.c" |
| |
| #define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) |
| #define RTC_DEV PNP_DEV(0x2e, W83627EHG_RTC) |
| |
| #include <device/pci_ids.h> |
| #include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c" |
| static void memreset_setup(void) |
| { |
| } |
| |
| static void memreset(int controllers, const struct mem_controller *ctrl) |
| { |
| } |
| |
| static inline void activate_spd_rom(const struct mem_controller *ctrl) |
| { |
| #define SMBUS_SWITCH1 0x70 |
| #define SMBUS_SWITCH2 0x72 |
| unsigned device=(ctrl->channel0[0])>>8; |
| smbus_send_byte(SMBUS_SWITCH1, device); |
| smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f); |
| } |
| |
| #if 0 |
| static inline void change_i2c_mux(unsigned device) |
| { |
| #define SMBUS_SWITCH1 0x70 |
| #define SMBUS_SWITHC2 0x72 |
| smbus_send_byte(SMBUS_SWITCH1, device & 0x0f); |
| smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f); |
| } |
| #endif |
| |
| static inline int spd_read_byte(unsigned device, unsigned address) |
| { |
| return smbus_read_byte(device, address); |
| } |
| |
| //#define K8_4RANK_DIMM_SUPPORT 1 |
| |
| #include "northbridge/amd/amdk8/amdk8_f.h" |
| #include "northbridge/amd/amdk8/raminit_f.c" |
| #include "northbridge/amd/amdk8/coherent_ht.c" |
| #include "northbridge/amd/amdk8/incoherent_ht.c" |
| #include "lib/generic_sdram.c" |
| |
| /* msi does not want the default */ |
| #include "resourcemap.c" |
| #include "cpu/amd/dualcore/dualcore.c" |
| |
| #define MCP55_NUM 1 |
| #include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h" |
| //set GPIO to input mode |
| #define MCP55_MB_SETUP \ |
| RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \ |
| RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ |
| RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ |
| RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \ |
| |
| #include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c" |
| |
| #include "cpu/amd/car/copy_and_run.c" |
| |
| #include "cpu/amd/car/post_cache_as_ram.c" |
| |
| #include "cpu/amd/model_fxx/init_cpus.c" |
| #include "cpu/amd/model_fxx/fidvid.c" |
| |
| #if CONFIG_USE_FALLBACK_IMAGE == 1 |
| |
| #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" |
| #include "northbridge/amd/amdk8/early_ht.c" |
| |
| |
| static void sio_setup(void) |
| { |
| |
| unsigned value; |
| uint32_t dword; |
| uint8_t byte; |
| |
| byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); |
| byte |= 0x20; |
| pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); |
| |
| dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); |
| dword |= (1<<0); |
| pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); |
| |
| |
| } |
| void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) |
| { |
| unsigned last_boot_normal_x = last_boot_normal(); |
| |
| /* Is this a cpu only reset? or Is this a secondary cpu? */ |
| if ((cpu_init_detectedx) || (!boot_cpu())) { |
| if (last_boot_normal_x) { |
| goto normal_image; |
| } else { |
| goto fallback_image; |
| } |
| } |
| |
| /* Nothing special needs to be done to find bus 0 */ |
| /* Allow the HT devices to be found */ |
| |
| enumerate_ht_chain(); |
| |
| sio_setup(); |
| |
| /* Setup the mcp55 */ |
| mcp55_enable_rom(); |
| |
| /* Is this a deliberate reset by the bios */ |
| if (bios_reset_detected() && last_boot_normal_x) { |
| goto normal_image; |
| } |
| /* This is the primary cpu how should I boot? */ |
| else if (do_normal_boot()) { |
| goto normal_image; |
| } |
| else { |
| goto fallback_image; |
| } |
| normal_image: |
| __asm__ volatile ("jmp __normal_image" |
| : /* outputs */ |
| : "a" (bist), "b"(cpu_init_detectedx) /* inputs */ |
| ); |
| |
| fallback_image: |
| ; |
| } |
| #endif |
| |
| void real_main(unsigned long bist, unsigned long cpu_init_detectedx); |
| |
| void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) |
| { |
| |
| #if CONFIG_USE_FALLBACK_IMAGE == 1 |
| failover_process(bist, cpu_init_detectedx); |
| #endif |
| real_main(bist, cpu_init_detectedx); |
| |
| } |
| |
| //CPU 1 mem is on SMBUS_HUB channel 2, and CPU 2 mem is on channel 1. |
| #define RC0 (2<<8) |
| #define RC1 (1<<8) |
| |
| void real_main(unsigned long bist, unsigned long cpu_init_detectedx) |
| { |
| static const uint16_t spd_addr [] = { |
| RC0|(0xa<<3)|0, RC0|(0xa<<3)|2, RC0|(0xa<<3)|4, RC0|(0xa<<3)|6, |
| RC0|(0xa<<3)|1, RC0|(0xa<<3)|3, RC0|(0xa<<3)|5, RC0|(0xa<<3)|7, |
| #if CONFIG_MAX_PHYSICAL_CPUS > 1 |
| RC1|(0xa<<3)|0, RC1|(0xa<<3)|2, RC1|(0xa<<3)|4, RC1|(0xa<<3)|6, |
| RC1|(0xa<<3)|1, RC1|(0xa<<3)|3, RC1|(0xa<<3)|5, RC1|(0xa<<3)|7, |
| #endif |
| }; |
| |
| unsigned bsp_apicid = 0; |
| int needs_reset; |
| struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); |
| char *p ; |
| |
| if (bist == 0) { |
| //init_cpus(cpu_init_detectedx); |
| bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); |
| } |
| |
| w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); |
| uart_init(); |
| console_init(); |
| |
| /* Halt if there was a built in self test failure */ |
| report_bist_failure(bist); |
| |
| setup_ms9282_resource_map(); |
| |
| setup_coherent_ht_domain(); |
| |
| wait_all_core0_started(); |
| |
| #if CONFIG_LOGICAL_CPUS==1 |
| // It is said that we should start core1 after all core0 launched |
| start_other_cores(); |
| //wait_all_other_cores_started(bsp_apicid); |
| #endif |
| ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn |
| |
| needs_reset = optimize_link_coherent_ht(); |
| |
| needs_reset |= optimize_link_incoherent_ht(sysinfo); |
| |
| needs_reset |= mcp55_early_setup_x(); |
| |
| if (needs_reset) { |
| print_info("ht reset -\r\n"); |
| soft_reset(); |
| } |
| |
| //It's the time to set ctrl now; |
| fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); |
| |
| enable_smbus(); |
| |
| #if 0 |
| int i; |
| for(i=4;i<8;i++) { |
| change_i2c_mux(i); |
| dump_smbus_registers(); |
| } |
| #endif |
| |
| memreset_setup(); |
| |
| sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); |
| |
| post_cache_as_ram(); |
| |
| } |