| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* This file is part of the coreboot project. */ |
| |
| #include <assert.h> |
| #include <bootmode.h> |
| #include <cbfs.h> |
| #include <console/console.h> |
| #include <ip_checksum.h> |
| #include <security/vboot/vboot_common.h> |
| #include <soc/dramc_param.h> |
| #include <soc/dramc_pi_api.h> |
| #include <soc/emi.h> |
| #include <soc/mt6358.h> |
| #include <symbols.h> |
| |
| static int mt_mem_test(void) |
| { |
| u64 rank_size[RANK_MAX]; |
| |
| if (CONFIG(MEMORY_TEST)) { |
| size_t r; |
| u8 *addr = _dram; |
| |
| dramc_get_rank_size(rank_size); |
| |
| for (r = RANK_0; r < RANK_MAX; r++) { |
| int i; |
| |
| if (rank_size[r] == 0) |
| break; |
| |
| i = complex_mem_test(addr, 0x2000); |
| |
| printk(BIOS_DEBUG, "[MEM] complex R/W mem test %s : %d\n", |
| (i == 0) ? "pass" : "fail", i); |
| |
| if (i != 0) { |
| printk(BIOS_ERR, "DRAM memory test failed\n"); |
| return -1; |
| } |
| |
| addr += rank_size[r]; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void dump_param_header(const struct dramc_param *dparam) |
| { |
| const struct dramc_param_header *header = &dparam->header; |
| |
| printk(BIOS_DEBUG, "header.status = %#x\n", header->status); |
| printk(BIOS_DEBUG, "header.magic = %#x (expected: %#x)\n", |
| header->magic, DRAMC_PARAM_HEADER_MAGIC); |
| printk(BIOS_DEBUG, "header.version = %#x (expected: %#x)\n", |
| header->version, DRAMC_PARAM_HEADER_VERSION); |
| printk(BIOS_DEBUG, "header.size = %#x (expected: %#lx)\n", |
| header->size, sizeof(*dparam)); |
| printk(BIOS_DEBUG, "header.config = %#x\n", header->config); |
| printk(BIOS_DEBUG, "header.flags = %#x\n", header->flags); |
| printk(BIOS_DEBUG, "header.checksum = %#x\n", header->checksum); |
| } |
| |
| static u32 compute_checksum(const struct dramc_param *dparam) |
| { |
| return (u32)compute_ip_checksum(dparam->freq_params, |
| sizeof(dparam->freq_params)); |
| } |
| |
| static int dram_run_fast_calibration(const struct dramc_param *dparam, |
| u16 config) |
| { |
| if (!is_valid_dramc_param(dparam)) { |
| printk(BIOS_WARNING, |
| "Invalid DRAM calibration data from flash\n"); |
| dump_param_header(dparam); |
| return -1; |
| } |
| |
| if (dparam->header.config != config) { |
| printk(BIOS_WARNING, |
| "Incompatible config for calibration data from flash " |
| "(expected: %#x, saved: %#x)\n", |
| config, dparam->header.config); |
| return -1; |
| } |
| |
| const u32 checksum = compute_checksum(dparam); |
| if (dparam->header.checksum != checksum) { |
| printk(BIOS_ERR, |
| "Invalid DRAM calibration checksum from flash " |
| "(expected: %#x, saved: %#x)\n", |
| checksum, dparam->header.checksum); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int dram_run_full_calibration(struct dramc_param *dparam, u16 config) |
| { |
| initialize_dramc_param(dparam, config); |
| |
| /* Load and run the provided blob for full-calibration if available */ |
| struct prog dram = PROG_INIT(PROG_REFCODE, CONFIG_CBFS_PREFIX "/dram"); |
| |
| if (prog_locate(&dram)) |
| return -1; |
| |
| if (cbfs_prog_stage_load(&dram)) |
| return -2; |
| |
| dparam->do_putc = do_putchar; |
| prog_set_entry(&dram, prog_entry(&dram), dparam); |
| prog_run(&dram); |
| |
| if (dparam->header.status != DRAMC_SUCCESS) { |
| printk(BIOS_ERR, "Full calibration failed: status = %d\n", |
| dparam->header.status); |
| return -3; |
| } |
| |
| if (!(dparam->header.flags & DRAMC_FLAG_HAS_SAVED_DATA)) { |
| printk(BIOS_ERR, |
| "Full calibration executed without saving parameters. " |
| "Please ensure the blob is built properly.\n"); |
| return -4; |
| } |
| |
| return 0; |
| } |
| |
| static void set_source_to_flash(struct sdram_params *freq_params) |
| { |
| for (u8 shuffle = DRAM_DFS_SHUFFLE_1; shuffle < DRAM_DFS_SHUFFLE_MAX; |
| shuffle++) |
| freq_params[shuffle].source = DRAMC_PARAM_SOURCE_FLASH; |
| } |
| |
| static void init_sdram_params(struct sdram_params *dst, |
| const struct sdram_params *src) |
| { |
| for (u8 shuffle = DRAM_DFS_SHUFFLE_1; shuffle < DRAM_DFS_SHUFFLE_MAX; |
| shuffle++) |
| memcpy(&dst[shuffle], src, sizeof(*dst)); |
| } |
| |
| static void mt_mem_init_run(struct dramc_param_ops *dparam_ops) |
| { |
| struct dramc_param *dparam = dparam_ops->param; |
| |
| u16 config = 0; |
| if (CONFIG(MT8183_DRAM_EMCP)) |
| config |= DRAMC_CONFIG_EMCP; |
| |
| const bool recovery_mode = vboot_recovery_mode_enabled(); |
| |
| /* DRAM DVFS is disabled in recovery mode */ |
| if (CONFIG(MT8183_DRAM_DVFS) && !recovery_mode) |
| config |= DRAMC_CONFIG_DVFS; |
| |
| /* Load calibration params from flash and run fast calibration */ |
| if (recovery_mode) { |
| printk(BIOS_WARNING, "Skip loading cached calibration data\n"); |
| if (get_recovery_mode_retrain_switch()) { |
| printk(BIOS_WARNING, "Retrain memory in next boot\n"); |
| /* Use 0xFF as erased flash data. */ |
| memset(dparam, 0xff, sizeof(*dparam)); |
| dparam_ops->write_to_flash(dparam); |
| } |
| } else if (dparam_ops->read_from_flash(dparam)) { |
| printk(BIOS_INFO, "DRAM-K: Fast Calibration\n"); |
| if (dram_run_fast_calibration(dparam, config) == 0) { |
| printk(BIOS_INFO, |
| "Calibration params loaded from flash\n"); |
| if (mt_set_emi(dparam) == 0 && mt_mem_test() == 0) |
| return; |
| } else { |
| printk(BIOS_ERR, |
| "Failed to apply cached calibration data\n"); |
| } |
| } else { |
| printk(BIOS_WARNING, |
| "Failed to read calibration data from flash\n"); |
| } |
| |
| /* Run full calibration */ |
| printk(BIOS_INFO, "DRAM-K: Full Calibration\n"); |
| int err = dram_run_full_calibration(dparam, config); |
| if (err == 0) { |
| printk(BIOS_INFO, "Successfully loaded DRAM blobs and " |
| "ran DRAM calibration\n"); |
| |
| /* |
| * In recovery mode the system boots in RO but the flash params |
| * should be calibrated for RW so we can't mix them up. |
| */ |
| if (!recovery_mode) { |
| set_source_to_flash(dparam->freq_params); |
| dparam->header.checksum = compute_checksum(dparam); |
| dparam_ops->write_to_flash(dparam); |
| printk(BIOS_DEBUG, "Calibration params saved to flash: " |
| "version=%#x, size=%#x\n", |
| dparam->header.version, dparam->header.size); |
| } |
| return; |
| } |
| |
| printk(BIOS_ERR, "Failed to do full calibration (%d), " |
| "falling back to load default sdram param\n", err); |
| |
| /* Init params from sdram configs and run partial calibration */ |
| printk(BIOS_INFO, "DRAM-K: Partial Calibration\n"); |
| init_sdram_params(dparam->freq_params, get_sdram_config()); |
| if (mt_set_emi(dparam) != 0) |
| die("Set emi failed with params from sdram config\n"); |
| if (mt_mem_test() != 0) |
| die("Memory test failed with params from sdram config\n"); |
| } |
| |
| void mt_mem_init(struct dramc_param_ops *dparam_ops) |
| { |
| mt_mem_init_run(dparam_ops); |
| |
| /* After DRAM calibration, restore vcore voltage to default setting */ |
| pmic_set_vcore_vol(800000); |
| } |