| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright 2012 Google Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <arch/io.h> |
| #include <console/console.h> |
| #include <bootmode.h> |
| #include <delay.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_ids.h> |
| #include <drivers/intel/gma/i915_reg.h> |
| #include <cpu/intel/haswell/haswell.h> |
| |
| #include "chip.h" |
| #include "haswell.h" |
| |
| struct gt_reg { |
| u32 reg; |
| u32 andmask; |
| u32 ormask; |
| }; |
| |
| static const struct gt_reg haswell_gt_setup[] = { |
| /* Enable Counters */ |
| { 0x0a248, 0x00000000, 0x00000016 }, |
| { 0x0a000, 0x00000000, 0x00070020 }, |
| { 0x0a180, 0xff3fffff, 0x15000000 }, |
| /* Enable DOP Clock Gating */ |
| { 0x09424, 0x00000000, 0x000003fd }, |
| /* Enable Unit Level Clock Gating */ |
| { 0x09400, 0x00000000, 0x00000080 }, |
| { 0x09404, 0x00000000, 0x40401000 }, |
| { 0x09408, 0x00000000, 0x00000000 }, |
| { 0x0940c, 0x00000000, 0x02000001 }, |
| { 0x0a008, 0x00000000, 0x08000000 }, |
| /* Wake Rate Limits */ |
| { 0x0a090, 0xffffffff, 0x00000000 }, |
| { 0x0a098, 0xffffffff, 0x03e80000 }, |
| { 0x0a09c, 0xffffffff, 0x00280000 }, |
| { 0x0a0a8, 0xffffffff, 0x0001e848 }, |
| { 0x0a0ac, 0xffffffff, 0x00000019 }, |
| /* Render/Video/Blitter Idle Max Count */ |
| { 0x02054, 0x00000000, 0x0000000a }, |
| { 0x12054, 0x00000000, 0x0000000a }, |
| { 0x22054, 0x00000000, 0x0000000a }, |
| /* RC Sleep / RCx Thresholds */ |
| { 0x0a0b0, 0xffffffff, 0x00000000 }, |
| { 0x0a0b4, 0xffffffff, 0x000003e8 }, |
| { 0x0a0b8, 0xffffffff, 0x0000c350 }, |
| /* RP Settings */ |
| { 0x0a010, 0xffffffff, 0x000f4240 }, |
| { 0x0a014, 0xffffffff, 0x12060000 }, |
| { 0x0a02c, 0xffffffff, 0x0000e808 }, |
| { 0x0a030, 0xffffffff, 0x0003bd08 }, |
| { 0x0a068, 0xffffffff, 0x000101d0 }, |
| { 0x0a06c, 0xffffffff, 0x00055730 }, |
| { 0x0a070, 0xffffffff, 0x0000000a }, |
| /* RP Control */ |
| { 0x0a024, 0x00000000, 0x00000b92 }, |
| /* HW RC6 Control */ |
| { 0x0a090, 0x00000000, 0x88040000 }, |
| /* Video Frequency Request */ |
| { 0x0a00c, 0x00000000, 0x08000000 }, |
| { 0 }, |
| }; |
| |
| static const struct gt_reg haswell_gt_lock[] = { |
| { 0x0a248, 0xffffffff, 0x80000000 }, |
| { 0x0a004, 0xffffffff, 0x00000010 }, |
| { 0x0a080, 0xffffffff, 0x00000004 }, |
| { 0x0a180, 0xffffffff, 0x80000000 }, |
| { 0 }, |
| }; |
| |
| /* some vga option roms are used for several chipsets but they only have one |
| * PCI ID in their header. If we encounter such an option rom, we need to do |
| * the mapping ourselfes |
| */ |
| |
| u32 map_oprom_vendev(u32 vendev) |
| { |
| u32 new_vendev=vendev; |
| |
| switch (vendev) { |
| case 0x80860402: /* GT1 Desktop */ |
| case 0x80860406: /* GT1 Mobile */ |
| case 0x8086040a: /* GT1 Server */ |
| case 0x80860a06: /* GT1 ULT */ |
| |
| case 0x80860412: /* GT2 Desktop */ |
| case 0x80860416: /* GT2 Mobile */ |
| case 0x8086041a: /* GT2 Server */ |
| case 0x80860a16: /* GT2 ULT */ |
| |
| case 0x80860422: /* GT3 Desktop */ |
| case 0x80860426: /* GT3 Mobile */ |
| case 0x8086042a: /* GT3 Server */ |
| case 0x80860a26: /* GT3 ULT */ |
| |
| new_vendev=0x80860406; /* GT1 Mobile */ |
| break; |
| } |
| |
| return new_vendev; |
| } |
| |
| static struct resource *gtt_res = NULL; |
| |
| static inline u32 gtt_read(u32 reg) |
| { |
| return read32(gtt_res->base + reg); |
| } |
| |
| static inline void gtt_write(u32 reg, u32 data) |
| { |
| write32(gtt_res->base + reg, data); |
| } |
| |
| static inline void gtt_rmw(u32 reg, u32 andmask, u32 ormask) |
| { |
| u32 val = gtt_read(reg); |
| val &= andmask; |
| val |= ormask; |
| gtt_write(reg, val); |
| } |
| |
| static inline void gtt_write_regs(const struct gt_reg *gt) |
| { |
| for (; gt && gt->reg; gt++) { |
| if (gt->andmask) |
| gtt_rmw(gt->reg, gt->andmask, gt->ormask); |
| else |
| gtt_write(gt->reg, gt->ormask); |
| } |
| } |
| |
| #define GTT_RETRY 1000 |
| static int gtt_poll(u32 reg, u32 mask, u32 value) |
| { |
| unsigned try = GTT_RETRY; |
| u32 data; |
| |
| while (try--) { |
| data = gtt_read(reg); |
| if ((data & mask) == value) |
| return 1; |
| udelay(10); |
| } |
| |
| printk(BIOS_ERR, "GT init timeout\n"); |
| return 0; |
| } |
| |
| static void power_well_enable(void) |
| { |
| gtt_write(HSW_PWR_WELL_CTL1, HSW_PWR_WELL_ENABLE); |
| gtt_poll(HSW_PWR_WELL_CTL1, HSW_PWR_WELL_STATE, HSW_PWR_WELL_STATE); |
| } |
| |
| static void gma_pm_init_pre_vbios(struct device *dev) |
| { |
| printk(BIOS_DEBUG, "GT Power Management Init\n"); |
| |
| gtt_res = find_resource(dev, PCI_BASE_ADDRESS_0); |
| if (!gtt_res || !gtt_res->base) |
| return; |
| |
| power_well_enable(); |
| |
| /* |
| * Enable RC6 |
| */ |
| |
| /* Enable Force Wake */ |
| gtt_write(0x0a180, 1 << 5); |
| gtt_write(0x0a188, 0x00010001); |
| gtt_poll(0x130044, 1 << 0, 1 << 0); |
| |
| /* GT Settings */ |
| gtt_write_regs(haswell_gt_setup); |
| |
| /* Wait for Mailbox Ready */ |
| gtt_poll(0x138124, (1 << 31), (0 << 31)); |
| /* Mailbox Data - RC6 VIDS */ |
| gtt_write(0x138128, 0x00000000); |
| /* Mailbox Command */ |
| gtt_write(0x138124, 0x80000004); |
| /* Wait for Mailbox Ready */ |
| gtt_poll(0x138124, (1 << 31), (0 << 31)); |
| |
| /* Enable PM Interrupts */ |
| gtt_write(0x4402c, 0x03000076); |
| |
| /* Enable RC6 in idle */ |
| gtt_write(0x0a094, 0x00040000); |
| |
| /* PM Lock Settings */ |
| gtt_write_regs(haswell_gt_lock); |
| } |
| |
| static void gma_setup_panel(struct device *dev) |
| { |
| struct northbridge_intel_haswell_config *conf = dev->chip_info; |
| u32 reg32; |
| |
| printk(BIOS_DEBUG, "GT Power Management Init (post VBIOS)\n"); |
| |
| /* Setup Digital Port Hotplug */ |
| reg32 = gtt_read(0xc4030); |
| if (!reg32) { |
| reg32 = (conf->gpu_dp_b_hotplug & 0x7) << 2; |
| reg32 |= (conf->gpu_dp_c_hotplug & 0x7) << 10; |
| reg32 |= (conf->gpu_dp_d_hotplug & 0x7) << 18; |
| gtt_write(0xc4030, reg32); |
| } |
| |
| /* Setup Panel Power On Delays */ |
| reg32 = gtt_read(0xc7208); |
| if (!reg32) { |
| reg32 = (conf->gpu_panel_port_select & 0x3) << 30; |
| reg32 |= (conf->gpu_panel_power_up_delay & 0x1fff) << 16; |
| reg32 |= (conf->gpu_panel_power_backlight_on_delay & 0x1fff); |
| gtt_write(0xc7208, reg32); |
| } |
| |
| /* Setup Panel Power Off Delays */ |
| reg32 = gtt_read(0xc720c); |
| if (!reg32) { |
| reg32 = (conf->gpu_panel_power_down_delay & 0x1fff) << 16; |
| reg32 |= (conf->gpu_panel_power_backlight_off_delay & 0x1fff); |
| gtt_write(0xc720c, reg32); |
| } |
| |
| /* Setup Panel Power Cycle Delay */ |
| if (conf->gpu_panel_power_cycle_delay) { |
| reg32 = gtt_read(0xc7210); |
| reg32 &= ~0xff; |
| reg32 |= conf->gpu_panel_power_cycle_delay & 0xff; |
| gtt_write(0xc7210, reg32); |
| } |
| |
| /* Enable Backlight if needed */ |
| if (conf->gpu_cpu_backlight) { |
| gtt_write(0x48250, (1 << 31)); |
| gtt_write(0x48254, conf->gpu_cpu_backlight); |
| } |
| if (conf->gpu_pch_backlight) { |
| gtt_write(0xc8250, (1 << 31)); |
| gtt_write(0xc8254, conf->gpu_pch_backlight); |
| } |
| |
| /* Get display,pipeline,and DDI registers into a basic sane state */ |
| /* not all these have documented names. */ |
| gtt_write(0x45400, 0x80000000); |
| gtt_poll( 0x00045400, 0xc0000000, 0xc0000000); |
| gtt_write(_CURACNTR, 0x00000000); |
| gtt_write(_DSPACNTR, (/* DISPPLANE_SEL_PIPE(0=A,1=B) */0x0<<24)|0x00000000); |
| gtt_write(_DSPBCNTR, 0x00000000); |
| gtt_write(CPU_VGACNTRL, 0x8000298e); |
| gtt_write(_DSPASIZE+0xc, 0x00000000); |
| gtt_write(_DSPBSURF, 0x00000000); |
| gtt_write(0x4f008, 0x00000000); |
| gtt_write(0x4f008, 0x00000000); |
| gtt_write(0x4f008, 0x00000000); |
| gtt_write(0x4f040, 0x01000001); |
| gtt_write(0x4f044, 0x00000000); |
| gtt_write(0x4f048, 0x00000000); |
| gtt_write(0x4f04c, 0x03030000); |
| gtt_write(0x4f050, 0x00000000); |
| gtt_write(0x4f054, 0x00000001); |
| gtt_write(0x4f058, 0x00000000); |
| gtt_write(0x4f04c, 0x03450000); |
| gtt_write(0x4f04c, 0x45450000); |
| gtt_write(0x4f000, 0x03000400); |
| gtt_write(DP_A, 0x00000091); /* DDI-A enable */ |
| gtt_write(_FDI_RXA_MISC, 0x00200090); |
| gtt_write(_FDI_RXA_MISC, 0x0a000000); |
| gtt_write(0x46408, 0x00000070); |
| gtt_write(0x42090, 0x04000000); |
| gtt_write(0x4f050, 0xc0000000); |
| gtt_write(0x9840, 0x00000000); |
| gtt_write(0x42090, 0xa4000000); |
| gtt_write(SOUTH_DSPCLK_GATE_D, 0x00001000); |
| gtt_write(0x42080, 0x00004000); |
| gtt_write(0x64f80, 0x00ffffff); |
| gtt_write(0x64f84, 0x0007000e); |
| gtt_write(0x64f88, 0x00d75fff); |
| gtt_write(0x64f8c, 0x000f000a); |
| gtt_write(0x64f90, 0x00c30fff); |
| gtt_write(0x64f94, 0x00060006); |
| gtt_write(0x64f98, 0x00aaafff); |
| gtt_write(0x64f9c, 0x001e0000); |
| gtt_write(0x64fa0, 0x00ffffff); |
| gtt_write(0x64fa4, 0x000f000a); |
| gtt_write(0x64fa8, 0x00d75fff); |
| gtt_write(0x64fac, 0x00160004); |
| gtt_write(0x64fb0, 0x00c30fff); |
| gtt_write(0x64fb4, 0x001e0000); |
| gtt_write(0x64fb8, 0x00ffffff); |
| gtt_write(0x64fbc, 0x00060006); |
| gtt_write(0x64fc0, 0x00d75fff); |
| gtt_write(0x64fc4, 0x001e0000); |
| gtt_write(DDI_BUF_TRANS_A, 0x00ffffff); |
| gtt_write(DDI_BUF_TRANS_A+0x4, 0x0006000e); |
| gtt_write(DDI_BUF_TRANS_A+0x8, 0x00d75fff); |
| gtt_write(DDI_BUF_TRANS_A+0xc, 0x0005000a); |
| gtt_write(DDI_BUF_TRANS_A+0x10, 0x00c30fff); |
| gtt_write(DDI_BUF_TRANS_A+0x14, 0x00040006); |
| gtt_write(DDI_BUF_TRANS_A+0x18, 0x80aaafff); |
| gtt_write(DDI_BUF_TRANS_A+0x1c, 0x000b0000); |
| gtt_write(DDI_BUF_TRANS_A+0x20, 0x00ffffff); |
| gtt_write(DDI_BUF_TRANS_A+0x24, 0x0005000a); |
| gtt_write(DDI_BUF_TRANS_A+0x28, 0x00d75fff); |
| gtt_write(DDI_BUF_TRANS_A+0x2c, 0x000c0004); |
| gtt_write(DDI_BUF_TRANS_A+0x30, 0x80c30fff); |
| gtt_write(DDI_BUF_TRANS_A+0x34, 0x000b0000); |
| gtt_write(DDI_BUF_TRANS_A+0x38, 0x00ffffff); |
| gtt_write(DDI_BUF_TRANS_A+0x3c, 0x00040006); |
| gtt_write(DDI_BUF_TRANS_A+0x40, 0x80d75fff); |
| gtt_write(DDI_BUF_TRANS_A+0x44, 0x000b0000); |
| gtt_write(DIGITAL_PORT_HOTPLUG_CNTRL, |
| DIGITAL_PORTA_HOTPLUG_ENABLE |0x00000010); |
| gtt_write(SDEISR+0x30, |
| PORTD_HOTPLUG_ENABLE | PORTB_HOTPLUG_ENABLE |0x10100010); |
| gtt_write(PCH_PP_DIVISOR, 0x0004af06); |
| } |
| |
| static void gma_pm_init_post_vbios(struct device *dev) |
| { |
| int cdclk = 0; |
| int devid = pci_read_config16(dev, PCI_DEVICE_ID); |
| int gpu_is_ulx = 0; |
| |
| if (devid == 0x0a0e || devid == 0x0a1e) |
| gpu_is_ulx = 1; |
| |
| /* CD Frequency */ |
| if ((gtt_read(0x42014) & 0x1000000) || gpu_is_ulx || haswell_is_ult()) |
| cdclk = 0; /* fixed frequency */ |
| else |
| cdclk = 2; /* variable frequency */ |
| |
| if (gpu_is_ulx || cdclk != 0) |
| gtt_rmw(0x130040, 0xf7ffffff, 0x04000000); |
| else |
| gtt_rmw(0x130040, 0xf3ffffff, 0x00000000); |
| |
| /* More magic */ |
| if (haswell_is_ult() || gpu_is_ulx) { |
| if (!gpu_is_ulx) |
| gtt_write(0x138128, 0x00000000); |
| else |
| gtt_write(0x138128, 0x00000001); |
| gtt_write(0x13812c, 0x00000000); |
| gtt_write(0x138124, 0x80000017); |
| } |
| |
| /* Disable Force Wake */ |
| gtt_write(0x0a188, 0x00010000); |
| gtt_poll(0x130044, 1 << 0, 0 << 0); |
| gtt_write(0x0a188, 0x00000001); |
| } |
| |
| static void gma_func0_init(struct device *dev) |
| { |
| int lightup_ok = 0; |
| u32 reg32; |
| u32 graphics_base; //, graphics_size; |
| /* IGD needs to be Bus Master */ |
| reg32 = pci_read_config32(dev, PCI_COMMAND); |
| reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO; |
| pci_write_config32(dev, PCI_COMMAND, reg32); |
| |
| |
| /* the BAR for graphics space is a well known number for |
| * sandy and ivy. And the resource code renumbers it. |
| * So it's almost like having two hardcodes. |
| */ |
| graphics_base = dev->resource_list[1].base; |
| |
| /* Init graphics power management */ |
| gma_pm_init_pre_vbios(dev); |
| |
| /* Post VBIOS init */ |
| gma_setup_panel(dev); |
| |
| #if CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT |
| printk(BIOS_SPEW, "NATIVE graphics, run native enable\n"); |
| u32 iobase, mmiobase, physbase; |
| iobase = dev->resource_list[2].base; |
| mmiobase = dev->resource_list[0].base; |
| physbase = pci_read_config32(dev, 0x5c) & ~0xf; |
| |
| int i915lightup(u32 physbase, u32 iobase, u32 mmiobase, u32 gfx); |
| lightup_ok = i915lightup(physbase, iobase, mmiobase, graphics_base); |
| if (lightup_ok) |
| gfx_set_init_done(1); |
| #endif |
| if (! lightup_ok) { |
| printk(BIOS_SPEW, "FUI did not run; using VBIOS\n"); |
| pci_dev_init(dev); |
| } |
| |
| /* Post VBIOS init */ |
| gma_pm_init_post_vbios(dev); |
| } |
| |
| static void gma_set_subsystem(device_t dev, unsigned vendor, unsigned device) |
| { |
| if (!vendor || !device) { |
| pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, |
| pci_read_config32(dev, PCI_VENDOR_ID)); |
| } else { |
| pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, |
| ((device & 0xffff) << 16) | (vendor & 0xffff)); |
| } |
| } |
| |
| static struct pci_operations gma_pci_ops = { |
| .set_subsystem = gma_set_subsystem, |
| }; |
| |
| static struct device_operations gma_func0_ops = { |
| .read_resources = pci_dev_read_resources, |
| .set_resources = pci_dev_set_resources, |
| .enable_resources = pci_dev_enable_resources, |
| .init = gma_func0_init, |
| .scan_bus = 0, |
| .enable = 0, |
| .ops_pci = &gma_pci_ops, |
| }; |
| |
| static const unsigned short pci_device_ids[] = { |
| 0x0402, /* Desktop GT1 */ |
| 0x0412, /* Desktop GT2 */ |
| 0x0422, /* Desktop GT3 */ |
| 0x0406, /* Mobile GT1 */ |
| 0x0416, /* Mobile GT2 */ |
| 0x0426, /* Mobile GT3 */ |
| 0x0d16, /* Mobile 4+3 GT1 */ |
| 0x0d26, /* Mobile 4+3 GT2 */ |
| 0x0d36, /* Mobile 4+3 GT3 */ |
| 0x0a06, /* ULT GT1 */ |
| 0x0a16, /* ULT GT2 */ |
| 0x0a26, /* ULT GT3 */ |
| 0, |
| }; |
| |
| static const struct pci_driver pch_lpc __pci_driver = { |
| .ops = &gma_func0_ops, |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .devices = pci_device_ids, |
| }; |