blob: 1248801f956e6f1abe8b19c8fd5694dc4709a343 [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +02001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.11.0-13-generic (root@amd-desktop) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu9) ) #20 SMP Wed Nov 27 05:54:32 EST 2013 (Ubuntu 3.11.0-13.20-generic 3.11.6)
5[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=39bae622-efc7-4a51-9545-aa6bd5df8382 ro crashkernel=384M-2G:64M,2G-:128M quiet splash
6[ 0.000000] KERNEL supported cpus:
7[ 0.000000] Intel GenuineIntel
8[ 0.000000] AMD AuthenticAMD
9[ 0.000000] Centaur CentaurHauls
10[ 0.000000] e820: BIOS-provided physical RAM map:
11[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
12[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffbdfff] usable
15[ 0.000000] BIOS-e820: [mem 0x00000000bffbe000-0x00000000dfffffff] reserved
16[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
17[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
18[ 0.000000] NX (Execute Disable) protection: active
19[ 0.000000] SMBIOS 2.7 present.
20[ 0.000000] DMI: AMD DB-FT3b/DB-FT3b, BIOS 4.0-6942-g4177db5 09/24/2014
21[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
22[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
23[ 0.000000] No AGP bridge found
24[ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
25[ 0.000000] MTRR default type: uncachable
26[ 0.000000] MTRR fixed ranges enabled:
27[ 0.000000] 00000-9FFFF write-back
28[ 0.000000] A0000-BFFFF uncachable
29[ 0.000000] C0000-FFFFF write-back
30[ 0.000000] MTRR variable ranges enabled:
31[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
32[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
33[ 0.000000] 2 disabled
34[ 0.000000] 3 disabled
35[ 0.000000] 4 disabled
36[ 0.000000] 5 disabled
37[ 0.000000] 6 base 00FF800000 mask FFFF800000 write-protect
38[ 0.000000] 7 disabled
39[ 0.000000] TOM2: 000000011f000000 aka 4592M
40[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
41[ 0.000000] e820: last_pfn = 0xbffbe max_arch_pfn = 0x400000000
42[ 0.000000] found SMP MP-table at [mem 0x000f1a60-0x000f1a6f] mapped at [ffff8800000f1a60]
43[ 0.000000] Scanning 1 areas for low memory corruption
44[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
45[ 0.000000] Using GB pages for direct mapping
46[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
47[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
48[ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
49[ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
50[ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
51[ 0.000000] init_memory_mapping: [mem 0x11ee00000-0x11effffff]
52[ 0.000000] [mem 0x11ee00000-0x11effffff] page 2M
53[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
54[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11edfffff]
55[ 0.000000] [mem 0x11c000000-0x11edfffff] page 2M
56[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
57[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
58[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbffbdfff]
59[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
60[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
61[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
62[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
63[ 0.000000] [mem 0xbfe00000-0xbffbdfff] page 4k
64[ 0.000000] RAMDISK: [mem 0x35eaa000-0x36f4cfff]
65[ 0.000000] Reserving 128MB of memory at 720MB for crashkernel (System RAM: 3567MB)
66[ 0.000000] ACPI: RSDP 00000000000f1a40 00014 (v00 CORE )
67[ 0.000000] ACPI: RSDT 00000000bffe2424 00040 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: FACP 00000000bffe3b88 000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: DSDT 00000000bffe24c8 0167A (v02 AMD COREBOOT 00010001 INTL 20130626)
70[ 0.000000] ACPI: FACS 00000000bffe3b48 00040
71[ 0.000000] ACPI: HPET 00000000bffe3c80 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: APIC 00000000bffe3cb8 0007E (v01 CORE COREBOOT 00000000 CORE 00000000)
73[ 0.000000] ACPI: HEST 00000000bffe3d38 001D0 (v01 CORE COREBOOT 00000000 CORE 00000000)
74[ 0.000000] ACPI: SSDT 00000000bffe3f10 0487A (v02 AMD AGESA 00000002 MSFT 04000000)
75[ 0.000000] ACPI: SSDT 00000000bffe8790 00624 (v01 AMD AGESA 00000001 AMD 00000001)
76[ 0.000000] ACPI: SSDT 00000000bffe8db4 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
77[ 0.000000] ACPI: Local APIC address 0xfee00000
78[ 0.000000] No NUMA configuration found
79[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
80[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11effffff]
81[ 0.000000] NODE_DATA [mem 0x11eff9000-0x11effdfff]
82[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ae00000-ffff88011e5fffff] on node 0
83[ 0.000000] Zone ranges:
84[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
85[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
86[ 0.000000] Normal [mem 0x100000000-0x11effffff]
87[ 0.000000] Movable zone start for each node
88[ 0.000000] Early memory node ranges
89[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
90[ 0.000000] node 0: [mem 0x00100000-0xbffbdfff]
91[ 0.000000] node 0: [mem 0x100000000-0x11effffff]
92[ 0.000000] On node 0 totalpages: 913244
93[ 0.000000] DMA zone: 64 pages used for memmap
94[ 0.000000] DMA zone: 21 pages reserved
95[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
96[ 0.000000] DMA32 zone: 12223 pages used for memmap
97[ 0.000000] DMA32 zone: 782270 pages, LIFO batch:31
98[ 0.000000] Normal zone: 1984 pages used for memmap
99[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
100[ 0.000000] ACPI: PM-Timer IO Port: 0x818
101[ 0.000000] ACPI: Local APIC address 0xfee00000
102[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
103[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
104[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
105[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
106[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
107[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
108[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
109[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec20000] gsi_base[24])
110[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
111[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
112[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
113[ 0.000000] ACPI: IRQ0 used by override.
114[ 0.000000] ACPI: IRQ2 used by override.
115[ 0.000000] ACPI: IRQ9 used by override.
116[ 0.000000] Using ACPI (MADT) for SMP configuration information
117[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
118[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
119[ 0.000000] nr_irqs_gsi: 72
120[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
121[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
122[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
123[ 0.000000] PM: Registered nosave memory: [mem 0xbffbe000-0xdfffffff]
124[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
125[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
126[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
127[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
128[ 0.000000] Booting paravirtualized kernel on bare hardware
129[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
130[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011ec00000 s86720 r8192 d23872 u524288
131[ 0.000000] pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
132[ 0.000000] pcpu-alloc: [0] 0 1 2 3
133[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 898952
134[ 0.000000] Policy zone: Normal
135[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=39bae622-efc7-4a51-9545-aa6bd5df8382 ro crashkernel=384M-2G:64M,2G-:128M quiet splash
136[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
137[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
138[ 0.000000] Checking aperture...
139[ 0.000000] No AGP bridge found
140[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
141[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
142[ 0.000000] Memory: 3364428K/3652976K available (7141K kernel code, 1081K rwdata, 3260K rodata, 1364K init, 1420K bss, 288548K reserved)
143[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
144[ 0.000000] Hierarchical RCU implementation.
145[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
146[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
147[ 0.000000] Offload RCU callbacks from all CPUs
148[ 0.000000] Offload RCU callbacks from CPUs: 0-255.
149[ 0.000000] NR_IRQS:16640 nr_irqs:1024 16
150[ 0.000000] spurious 8259A interrupt: IRQ7.
151[ 0.000000] Console: colour VGA+ 80x25
152[ 0.000000] console [tty0] enabled
153[ 0.000000] allocated 14680064 bytes of page_cgroup
154[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
155[ 0.000000] hpet clockevent registered
156[ 0.000000] tsc: Fast TSC calibration using PIT
157[ 0.004000] tsc: Detected 1197.792 MHz processor
158[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2395.58 BogoMIPS (lpj=4791168)
159[ 0.000013] pid_max: default: 32768 minimum: 301
160[ 0.000077] Security Framework initialized
161[ 0.000114] AppArmor: AppArmor initialized
162[ 0.000118] Yama: becoming mindful.
163[ 0.000943] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
164[ 0.003679] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
165[ 0.004781] Mount-cache hash table entries: 256
166[ 0.005233] Initializing cgroup subsys memory
167[ 0.005257] Initializing cgroup subsys devices
168[ 0.005261] Initializing cgroup subsys freezer
169[ 0.005266] Initializing cgroup subsys blkio
170[ 0.005270] Initializing cgroup subsys perf_event
171[ 0.005277] Initializing cgroup subsys hugetlb
172[ 0.005326] tseg: 0000000000
173[ 0.005339] CPU: Physical Processor ID: 0
174[ 0.005342] CPU: Processor Core ID: 0
175[ 0.005346] mce: CPU supports 6 MCE banks
176[ 0.005359] LVT offset 1 assigned for vector 0xf9
177[ 0.005370] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
178[ 0.005370] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128
179[ 0.005370] tlb_flushall_shift: 5
180[ 0.005612] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
181[ 0.010470] ACPI: Core revision 20130517
182[ 0.019219] ACPI: All ACPI Tables successfully acquired
183[ 0.019232] ftrace: allocating 27803 entries in 109 pages
184[ 0.046199] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
185[ 0.085903] smpboot: CPU0: AMD Eng Sample: ZT12F004J4469_22/12/07/06_9855 (fam: 16, model: 30, stepping: 00)
186[ 0.191677] Performance Events: AMD PMU driver.
187[ 0.191687] ... version: 0
188[ 0.191690] ... bit width: 48
189[ 0.191693] ... generic registers: 4
190[ 0.191697] ... value mask: 0000ffffffffffff
191[ 0.191700] ... max period: 00007fffffffffff
192[ 0.191703] ... fixed-purpose events: 0
193[ 0.191706] ... event mask: 000000000000000f
194[ 0.196006] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
195[ 0.196232] smpboot: Booting Node 0, Processors #1 #2 #3 OK
196[ 0.236199] Brought up 4 CPUs
197[ 0.236210] smpboot: Total of 4 processors activated (9582.33 BogoMIPS)
198[ 0.237717] devtmpfs: initialized
199[ 0.240968] EVM: security.selinux
200[ 0.240972] EVM: security.SMACK64
201[ 0.240976] EVM: security.capability
202[ 0.243648] regulator-dummy: no parameters
203[ 0.243708] RTC time: 21:38:08, date: 09/21/14
204[ 0.243804] NET: Registered protocol family 16
205[ 0.244261] ACPI: bus type PCI registered
206[ 0.244268] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
207[ 0.244384] PCI: Using configuration type 1 for base access
208[ 0.244388] PCI: Using configuration type 1 for extended access
209[ 0.244834] mtrr: your CPUs had inconsistent variable MTRR settings
210[ 0.244838] mtrr: probably your BIOS does not setup all CPUs.
211[ 0.244840] mtrr: corrected configuration.
212[ 0.246948] bio: create slab <bio-0> at 0
213[ 0.247398] ACPI: Added _OSI(Module Device)
214[ 0.247403] ACPI: Added _OSI(Processor Device)
215[ 0.247407] ACPI: Added _OSI(3.0 _SCP Extensions)
216[ 0.247411] ACPI: Added _OSI(Processor Aggregator Device)
217[ 0.249108] ACPI: EC: Look up EC in DSDT
218[ 0.250965] ACPI: Executed 1 blocks of module-level executable AML code
219[ 0.259600] ACPI: Interpreter enabled
220[ 0.259654] ACPI: (supports S0 S1 S2 S3 S4 S5)
221[ 0.259666] ACPI: Using IOAPIC for interrupt routing
222[ 0.259698] HEST: Table parsing has been initialized.
223[ 0.259706] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
224[ 0.259864] ACPI: No dock devices found.
225[ 0.267046] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
226[ 0.267201] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
227[ 0.267340] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
228[ 0.267542] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
229[ 0.267810] PCI host bridge to bus 0000:00
230[ 0.267819] pci_bus 0000:00: root bus resource [bus 00-ff]
231[ 0.267826] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
232[ 0.267837] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
233[ 0.267844] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
234[ 0.267849] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
235[ 0.267855] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
236[ 0.267873] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
237[ 0.268080] pci 0000:00:01.0: [1002:9855] type 00 class 0x030000
238[ 0.268102] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
239[ 0.268118] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
240[ 0.268129] pci 0000:00:01.0: reg 0x20: [io 0x2000-0x20ff]
241[ 0.268141] pci 0000:00:01.0: reg 0x24: [mem 0xf0c00000-0xf0c3ffff]
242[ 0.268152] pci 0000:00:01.0: reg 0x30: [mem 0xf0c40000-0xf0c5ffff pref]
243[ 0.268199] pci 0000:00:01.0: supports D1 D2
244[ 0.268205] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
245[ 0.268388] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
246[ 0.268407] pci 0000:00:01.1: reg 0x10: [mem 0xf0c80000-0xf0c83fff 64bit]
247[ 0.268481] pci 0000:00:01.1: supports D1 D2
248[ 0.268642] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
249[ 0.268829] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
250[ 0.268911] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
251[ 0.269026] pci 0000:00:02.3: System wakeup disabled by ACPI
252[ 0.269114] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
253[ 0.269137] pci 0000:00:08.0: reg 0x10: [mem 0xf0c60000-0xf0c7ffff 64bit pref]
254[ 0.269148] pci 0000:00:08.0: reg 0x18: [mem 0xf0a00000-0xf0afffff]
255[ 0.269159] pci 0000:00:08.0: reg 0x1c: [mem 0xf0c8c000-0xf0c8cfff]
256[ 0.269169] pci 0000:00:08.0: reg 0x20: [mem 0xf0b00000-0xf0bfffff]
257[ 0.269180] pci 0000:00:08.0: reg 0x24: [mem 0xf0c88000-0xf0c89fff]
258[ 0.269391] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
259[ 0.269417] pci 0000:00:10.0: reg 0x10: [mem 0xf0c8a000-0xf0c8bfff 64bit]
260[ 0.269524] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
261[ 0.269641] pci 0000:00:10.0: System wakeup disabled by ACPI
262[ 0.269722] pci 0000:00:11.0: [1022:7800] type 00 class 0x01018f
263[ 0.269746] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
264[ 0.269759] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
265[ 0.269771] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
266[ 0.269784] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
267[ 0.269797] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
268[ 0.269810] pci 0000:00:11.0: reg 0x24: [mem 0xf0c8d000-0xf0c8d3ff]
269[ 0.269834] pci 0000:00:11.0: set SATA to AHCI mode
270[ 0.269871] pci 0000:00:11.0: PME# supported from D3hot
271[ 0.270042] pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
272[ 0.270066] pci 0000:00:12.0: reg 0x10: [mem 0xf0c8d400-0xf0c8d4ff]
273[ 0.270150] pci 0000:00:12.0: supports D1 D2
274[ 0.270155] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
275[ 0.270263] pci 0000:00:12.0: System wakeup disabled by ACPI
276[ 0.270341] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
277[ 0.270364] pci 0000:00:13.0: reg 0x10: [mem 0xf0c8d500-0xf0c8d5ff]
278[ 0.270448] pci 0000:00:13.0: supports D1 D2
279[ 0.270453] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
280[ 0.270561] pci 0000:00:13.0: System wakeup disabled by ACPI
281[ 0.270639] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
282[ 0.270854] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
283[ 0.271075] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
284[ 0.271098] pci 0000:00:14.7: reg 0x10: [mem 0xf0c8d600-0xf0c8d6ff 64bit]
285[ 0.271295] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
286[ 0.271467] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
287[ 0.271640] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
288[ 0.271819] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
289[ 0.271997] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
290[ 0.272164] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
291[ 0.272439] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
292[ 0.272461] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
293[ 0.272493] pci 0000:01:00.0: reg 0x18: [mem 0xf090c000-0xf090cfff 64bit]
294[ 0.272515] pci 0000:01:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
295[ 0.272596] pci 0000:01:00.0: supports D1 D2
296[ 0.272602] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
297[ 0.272715] pci 0000:01:00.1: [10ec:816a] type 00 class 0x070002
298[ 0.272737] pci 0000:01:00.1: reg 0x10: [io 0x1400-0x14ff]
299[ 0.272768] pci 0000:01:00.1: reg 0x18: [mem 0xf090d000-0xf090dfff 64bit]
300[ 0.272790] pci 0000:01:00.1: reg 0x20: [mem 0xf0900000-0xf0903fff 64bit]
301[ 0.272871] pci 0000:01:00.1: supports D1 D2
302[ 0.272876] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
303[ 0.272982] pci 0000:01:00.2: [10ec:816b] type 00 class 0x070002
304[ 0.273004] pci 0000:01:00.2: reg 0x10: [io 0x1800-0x18ff]
305[ 0.273035] pci 0000:01:00.2: reg 0x18: [mem 0xf090e000-0xf090efff 64bit]
306[ 0.273056] pci 0000:01:00.2: reg 0x20: [mem 0xf0904000-0xf0907fff 64bit]
307[ 0.273137] pci 0000:01:00.2: supports D1 D2
308[ 0.273143] pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot D3cold
309[ 0.273252] pci 0000:01:00.3: [10ec:816c] type 00 class 0x0c0701
310[ 0.273273] pci 0000:01:00.3: reg 0x10: [io 0x1c00-0x1cff]
311[ 0.273305] pci 0000:01:00.3: reg 0x18: [mem 0xf090f000-0xf090f0ff 64bit]
312[ 0.273326] pci 0000:01:00.3: reg 0x20: [mem 0xf0908000-0xf090bfff 64bit]
313[ 0.273407] pci 0000:01:00.3: supports D1 D2
314[ 0.273412] pci 0000:01:00.3: PME# supported from D0 D1 D2 D3hot D3cold
315[ 0.279699] pci 0000:00:02.3: PCI bridge to [bus 01]
316[ 0.279709] pci 0000:00:02.3: bridge window [io 0x1000-0x1fff]
317[ 0.279716] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff]
318[ 0.279725] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
319[ 0.280034] ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15)
320[ 0.280171] ACPI: PCI Interrupt Link [INTB] (IRQs 3 *4 5 7 10 11 12 15)
321[ 0.280304] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15)
322[ 0.280436] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15)
323[ 0.280567] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15)
324[ 0.280698] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10
325[ 0.280823] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
326[ 0.280954] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
327[ 0.281403] ACPI: Enabled 5 GPEs in block 00 to 1F
328[ 0.281421] ACPI: \_SB_.PCI0: notify handler is installed
329[ 0.281481] Found 1 acpi root devices
330[ 0.281709] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
331[ 0.281719] vgaarb: loaded
332[ 0.281722] vgaarb: bridge control possible 0000:00:01.0
333[ 0.282182] SCSI subsystem initialized
334[ 0.282188] ACPI: bus type ATA registered
335[ 0.282305] libata version 3.00 loaded.
336[ 0.282347] ACPI: bus type USB registered
337[ 0.282395] usbcore: registered new interface driver usbfs
338[ 0.282417] usbcore: registered new interface driver hub
339[ 0.282476] usbcore: registered new device driver usb
340[ 0.282757] PCI: Using ACPI for IRQ routing
341[ 0.282763] PCI: pci_cache_line_size set to 64 bytes
342[ 0.282836] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
343[ 0.282841] e820: reserve RAM buffer [mem 0xbffbe000-0xbfffffff]
344[ 0.282845] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
345[ 0.283046] NetLabel: Initializing
346[ 0.283051] NetLabel: domain hash size = 128
347[ 0.283054] NetLabel: protocols = UNLABELED CIPSOv4
348[ 0.283082] NetLabel: unlabeled traffic allowed by default
349[ 0.283227] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
350[ 0.283236] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
351[ 0.285293] Switched to clocksource hpet
352[ 0.297694] AppArmor: AppArmor Filesystem Enabled
353[ 0.297762] pnp: PnP ACPI init
354[ 0.297795] ACPI: bus type PNP registered
355[ 0.298144] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
356[ 0.298155] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
357[ 0.298244] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
358[ 0.298311] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
359[ 0.298341] pnp 00:03: [dma 4]
360[ 0.298402] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
361[ 0.298470] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
362[ 0.298764] pnp: PnP ACPI: found 5 devices
363[ 0.298768] ACPI: bus type PNP unregistered
364[ 0.308017] pci 0000:00:02.3: PCI bridge to [bus 01]
365[ 0.308026] pci 0000:00:02.3: bridge window [io 0x1000-0x1fff]
366[ 0.308034] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff]
367[ 0.308042] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
368[ 0.308200] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
369[ 0.308207] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
370[ 0.308213] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
371[ 0.308218] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
372[ 0.308224] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
373[ 0.308230] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
374[ 0.308235] pci_bus 0000:01: resource 1 [mem 0xf0900000-0xf09fffff]
375[ 0.308241] pci_bus 0000:01: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
376[ 0.308312] NET: Registered protocol family 2
377[ 0.308727] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
378[ 0.309028] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
379[ 0.309221] TCP: Hash tables configured (established 32768 bind 32768)
380[ 0.309281] TCP: reno registered
381[ 0.309319] UDP hash table entries: 2048 (order: 4, 65536 bytes)
382[ 0.309366] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
383[ 0.309534] NET: Registered protocol family 1
384[ 0.309565] pci 0000:00:01.0: Boot video device
385[ 0.310487] PCI: CLS 64 bytes, default 64
386[ 0.310595] Trying to unpack rootfs image as initramfs...
387[ 1.017086] Freeing initrd memory: 17036K (ffff880035eaa000 - ffff880036f4d000)
388[ 1.017100] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
389[ 1.017107] software IO TLB [mem 0xbbfbe000-0xbffbe000] (64MB) mapped at [ffff8800bbfbe000-ffff8800bffbdfff]
390[ 1.017496] perf: AMD NB counters detected
391[ 1.017511] perf: AMD L2I counters detected
392[ 1.017545] LVT offset 0 assigned for vector 0x400
393[ 1.017595] perf: AMD IBS detected (0x000000ff)
394[ 1.017659] Scanning for low memory corruption every 60 seconds
395[ 1.018280] Initialise module verification
396[ 1.018398] audit: initializing netlink socket (disabled)
397[ 1.018420] type=2000 audit(1411335488.904:1): initialized
398[ 1.089540] bounce pool size: 64 pages
399[ 1.089564] HugeTLB registered 2 MB page size, pre-allocated 0 pages
400[ 1.092537] zbud: loaded
401[ 1.092816] VFS: Disk quotas dquot_6.5.2
402[ 1.092921] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
403[ 1.094147] fuse init (API version 7.22)
404[ 1.094334] msgmni has been set to 6604
405[ 1.095339] Key type asymmetric registered
406[ 1.095344] Asymmetric key parser 'x509' registered
407[ 1.095426] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
408[ 1.095506] io scheduler noop registered
409[ 1.095511] io scheduler deadline registered (default)
410[ 1.095572] io scheduler cfq registered
411[ 1.095808] pcieport 0000:00:02.3: irq 72 for MSI/MSI-X
412[ 1.095960] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
413[ 1.095967] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
414[ 1.095972] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
415[ 1.095976] pci 0000:01:00.2: Signaling PME through PCIe PME interrupt
416[ 1.095981] pci 0000:01:00.3: Signaling PME through PCIe PME interrupt
417[ 1.095988] pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
418[ 1.096019] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
419[ 1.096056] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
420[ 1.096321] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
421[ 1.096333] ACPI: Power Button [PWRB]
422[ 1.096425] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
423[ 1.096432] ACPI: Power Button [PWRF]
424[ 1.096529] ACPI: acpi_idle registered with cpuidle
425[ 1.097051] GHES: Failed to enable APEI firmware first mode.
426[ 1.097206] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
427[ 1.100791] Linux agpgart interface v0.103
428[ 1.103955] brd: module loaded
429[ 1.105808] loop: module loaded
430[ 1.106711] libphy: Fixed MDIO Bus: probed
431[ 1.106936] tun: Universal TUN/TAP device driver, 1.6
432[ 1.106940] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
433[ 1.107041] PPP generic driver version 2.4.2
434[ 1.107132] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
435[ 1.107137] ehci-pci: EHCI PCI platform driver
436[ 1.107324] ehci-pci 0000:00:12.0: EHCI Host Controller
437[ 1.107340] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
438[ 1.107355] ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
439[ 1.107370] ehci-pci 0000:00:12.0: debug port 2
440[ 1.107442] ehci-pci 0000:00:12.0: irq 18, io mem 0xf0c8d400
441[ 1.117381] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
442[ 1.117425] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
443[ 1.117430] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
444[ 1.117435] usb usb1: Product: EHCI Host Controller
445[ 1.117440] usb usb1: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
446[ 1.117445] usb usb1: SerialNumber: 0000:00:12.0
447[ 1.117656] hub 1-0:1.0: USB hub found
448[ 1.117668] hub 1-0:1.0: 2 ports detected
449[ 1.117953] ehci-pci 0000:00:13.0: EHCI Host Controller
450[ 1.117967] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
451[ 1.117975] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
452[ 1.117989] ehci-pci 0000:00:13.0: debug port 2
453[ 1.118023] ehci-pci 0000:00:13.0: irq 18, io mem 0xf0c8d500
454[ 1.129381] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
455[ 1.129411] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
456[ 1.129416] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
457[ 1.129421] usb usb2: Product: EHCI Host Controller
458[ 1.129426] usb usb2: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
459[ 1.129431] usb usb2: SerialNumber: 0000:00:13.0
460[ 1.129618] hub 2-0:1.0: USB hub found
461[ 1.129628] hub 2-0:1.0: 2 ports detected
462[ 1.129774] ehci-platform: EHCI generic platform driver
463[ 1.129792] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
464[ 1.129795] ohci-platform: OHCI generic platform driver
465[ 1.129810] uhci_hcd: USB Universal Host Controller Interface driver
466[ 1.129982] xhci_hcd 0000:00:10.0: xHCI Host Controller
467[ 1.129996] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
468[ 1.130231] xhci_hcd 0000:00:10.0: irq 73 for MSI/MSI-X
469[ 1.130248] xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
470[ 1.130264] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
471[ 1.130280] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
472[ 1.130295] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
473[ 1.130450] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
474[ 1.130456] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
475[ 1.130461] usb usb3: Product: xHCI Host Controller
476[ 1.130466] usb usb3: Manufacturer: Linux 3.11.0-13-generic xhci_hcd
477[ 1.130470] usb usb3: SerialNumber: 0000:00:10.0
478[ 1.130610] xHCI xhci_add_endpoint called for root hub
479[ 1.130615] xHCI xhci_check_bandwidth called for root hub
480[ 1.130663] hub 3-0:1.0: USB hub found
481[ 1.130674] hub 3-0:1.0: 2 ports detected
482[ 1.130809] xhci_hcd 0000:00:10.0: xHCI Host Controller
483[ 1.130818] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
484[ 1.133592] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
485[ 1.133598] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
486[ 1.133603] usb usb4: Product: xHCI Host Controller
487[ 1.133607] usb usb4: Manufacturer: Linux 3.11.0-13-generic xhci_hcd
488[ 1.133612] usb usb4: SerialNumber: 0000:00:10.0
489[ 1.133761] xHCI xhci_add_endpoint called for root hub
490[ 1.133764] xHCI xhci_check_bandwidth called for root hub
491[ 1.133818] hub 4-0:1.0: USB hub found
492[ 1.133829] hub 4-0:1.0: 2 ports detected
493[ 1.141499] i8042: PNP: No PS/2 controller found. Probing ports directly.
494[ 2.013452] tsc: Refined TSC clocksource calibration: 1197.753 MHz
495[ 2.161199] i8042: No controller found
496[ 2.161381] mousedev: PS/2 mouse device common for all mice
497[ 2.161669] rtc_cmos 00:01: RTC can wake from S4
498[ 2.161828] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
499[ 2.161860] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
500[ 2.162010] device-mapper: uevent: version 1.0.3
501[ 2.162152] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
502[ 2.162278] cpuidle: using governor ladder
503[ 2.162433] cpuidle: using governor menu
504[ 2.162456] ledtrig-cpu: registered to indicate activity on CPUs
505[ 2.162661] TCP: cubic registered
506[ 2.162884] NET: Registered protocol family 10
507[ 2.163334] NET: Registered protocol family 17
508[ 2.163355] Key type dns_resolver registered
509[ 2.163960] PM: Hibernation image not present or could not be loaded.
510[ 2.163969] Loading module verification certificates
511[ 2.166660] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: f27c94f79b8e017f1b6771433b38db3e1a5f77e1'
512[ 2.166692] registered taskstats version 1
513[ 2.172126] Key type trusted registered
514[ 2.176737] Key type encrypted registered
515[ 2.181216] AppArmor: AppArmor sha1 policy hashing enabled
516[ 2.181792] Magic number: 14:406:652
517[ 2.181901] acpi LNXCPU:05: hash matches
518[ 2.181969] rtc_cmos 00:01: setting system clock to 2014-09-21 21:38:10 UTC (1411335490)
519[ 2.182238] acpi-cpufreq: overriding BIOS provided _PSD data
520[ 2.182619] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
521[ 2.182622] EDD information not available.
522[ 2.185732] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
523[ 2.185738] Write protecting the kernel read-only data: 12288k
524[ 2.192857] Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
525[ 2.198162] Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
526[ 2.223265] systemd-udevd[114]: starting version 204
527[ 2.257376] r8168: module verification failed: signature and/or required key missing - tainting kernel
528[ 2.258174] r8168 Gigabit Ethernet driver 8.038.00-NAPI loaded
529[ 2.258414] r8168 0000:01:00.0: irq 78 for MSI/MSI-X
530[ 2.265559] sdhci: Secure Digital Host Controller Interface driver
531[ 2.265567] sdhci: Copyright(c) Pierre Ossman
532[ 2.267214] ahci 0000:00:11.0: version 3.0
533[ 2.267475] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
534[ 2.267485] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
535[ 2.269385] scsi0 : ahci
536[ 2.269613] scsi1 : ahci
537[ 2.269717] ata1: SATA max UDMA/133 abar m1024@0xf0c8d000 port 0xf0c8d100 irq 19
538[ 2.269723] ata2: SATA max UDMA/133 abar m1024@0xf0c8d000 port 0xf0c8d180 irq 19
539[ 2.269828] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
540[ 2.270017] mmc0: no vqmmc regulator found
541[ 2.270022] mmc0: no vmmc regulator found
542[ 2.270163] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
543[ 2.283418] eth%d: 0xffffc90000748000, 00:00:1a:1b:58:4a, IRQ 78
544[ 2.283764] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
545[ 2.283780] r8168 Copyright (C) 2013 Realtek NIC software team <nicfae@realtek.com>
546[ 2.283780] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
547[ 2.283780] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
548[ 2.369492] usb 1-1: new high-speed USB device number 2 using ehci-pci
549[ 2.501907] usb 1-1: New USB device found, idVendor=0438, idProduct=7900
550[ 2.501915] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
551[ 2.502351] hub 1-1:1.0: USB hub found
552[ 2.502521] hub 1-1:1.0: 4 ports detected
553[ 2.589511] ata2: SATA link down (SStatus 0 SControl 300)
554[ 2.613508] usb 2-1: new high-speed USB device number 2 using ehci-pci
555[ 2.745845] usb 2-1: New USB device found, idVendor=0438, idProduct=7900
556[ 2.745852] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
557[ 2.746160] hub 2-1:1.0: USB hub found
558[ 2.746337] hub 2-1:1.0: 4 ports detected
559[ 2.761520] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
560[ 2.762697] ata1.00: ATA-8: ST3750525AS, JC45, max UDMA/133
561[ 2.762704] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
562[ 2.764079] ata1.00: configured for UDMA/133
563[ 2.764361] scsi 0:0:0:0: Direct-Access ATA ST3750525AS JC45 PQ: 0 ANSI: 5
564[ 2.764731] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
565[ 2.764737] sd 0:0:0:0: Attached scsi generic sg0 type 0
566[ 2.764948] sd 0:0:0:0: [sda] Write Protect is off
567[ 2.764956] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
568[ 2.765056] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
569[ 2.805423] sda: sda1 sda2 sda3 < sda5 sda6 > sda4
570[ 2.806611] sd 0:0:0:0: [sda] Attached SCSI disk
571[ 2.833643] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
572[ 2.944752] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52e
573[ 2.944761] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
574[ 2.944767] usb 1-1.1: Product: USB Receiver
575[ 2.944773] usb 1-1.1: Manufacturer: Logitech
576[ 2.953739] hidraw: raw HID events driver (C) Jiri Kosina
577[ 2.962971] usbcore: registered new interface driver usbhid
578[ 2.962977] usbhid: USB HID core driver
579[ 2.967113] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
580[ 2.967358] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-1.1/input0
581[ 2.968216] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input3
582[ 2.968648] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1.1/input1
583[ 3.013658] Switched to clocksource tsc
584[ 3.766555] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
585[ 10.038969] Adding 1757180k swap on /dev/sda6. Priority:-1 extents:1 across:1757180k FS
586[ 10.151447] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
587[ 10.229713] systemd-udevd[286]: starting version 204
588[ 10.368303] lp: driver loaded but no devices found
589[ 10.414128] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
590[ 10.414137] AMD IOMMUv2 functionality not available on this system
591[ 10.427062] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
592[ 10.427074] Disabling lock debugging due to kernel taint
593[ 10.448496] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
594[ 10.462324] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3154 MBytes.
595[ 10.462439] <6>[fglrx] vendor: 1002 device: 9855 count: 1
596[ 10.463732] <6>[fglrx] ioport: bar 4, base 0x2000, size: 0x100
597[ 10.464546] <6>[fglrx] Kernel PAT support is enabled
598[ 10.464600] <6>[fglrx] module loaded - fglrx 13.30.1 [Nov 12 2013] with 1 minors
599[ 10.490657] microcode: CPU0: patch_level=0x07030006
600[ 10.495590] type=1400 audit(1411349898.811:2): apparmor="STATUS" operation="profile_load" parent=323 profile="unconfined" name="/sbin/dhclient" pid=328 comm="apparmor_parser"
601[ 10.495613] type=1400 audit(1411349898.811:3): apparmor="STATUS" operation="profile_load" parent=323 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=328 comm="apparmor_parser"
602[ 10.495626] type=1400 audit(1411349898.811:4): apparmor="STATUS" operation="profile_load" parent=323 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=328 comm="apparmor_parser"
603[ 10.497240] type=1400 audit(1411349898.811:5): apparmor="STATUS" operation="profile_replace" parent=323 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=328 comm="apparmor_parser"
604[ 10.497260] type=1400 audit(1411349898.811:6): apparmor="STATUS" operation="profile_replace" parent=323 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=328 comm="apparmor_parser"
605[ 10.498723] type=1400 audit(1411349898.815:7): apparmor="STATUS" operation="profile_replace" parent=323 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=328 comm="apparmor_parser"
606[ 10.597500] hda-intel 0000:00:01.1: Using LPIB position fix
607[ 10.597554] snd_hda_intel 0000:00:01.1: irq 79 for MSI/MSI-X
608[ 10.599986] hda-intel 0000:00:01.1: Enable sync_write for stable communication
609[ 10.610613] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
610[ 10.610801] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
611[ 10.741154] microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin
612[ 10.741221] microcode: CPU1: patch_level=0x07030006
613[ 10.741241] microcode: CPU2: patch_level=0x07030006
614[ 10.741260] microcode: CPU3: patch_level=0x07030006
615[ 10.741390] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
616[ 10.846227] kvm: Nested Virtualization enabled
617[ 10.846239] kvm: Nested Paging enabled
618[ 11.596919] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
619[ 11.986547] init: failsafe main process (558) killed by TERM signal
620[ 12.234365] type=1400 audit(1411349900.551:8): apparmor="STATUS" operation="profile_load" parent=627 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=632 comm="apparmor_parser"
621[ 12.234387] type=1400 audit(1411349900.551:9): apparmor="STATUS" operation="profile_load" parent=627 profile="unconfined" name="chromium_browser" pid=632 comm="apparmor_parser"
622[ 12.234446] type=1400 audit(1411349900.551:10): apparmor="STATUS" operation="profile_load" parent=627 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=633 comm="apparmor_parser"
623[ 12.234463] type=1400 audit(1411349900.551:11): apparmor="STATUS" operation="profile_load" parent=627 profile="unconfined" name="chromium_browser" pid=633 comm="apparmor_parser"
624[ 12.553030] Bluetooth: Core ver 2.16
625[ 12.553083] NET: Registered protocol family 31
626[ 12.553088] Bluetooth: HCI device and connection manager initialized
627[ 12.553278] Bluetooth: HCI socket layer initialized
628[ 12.553286] Bluetooth: L2CAP socket layer initialized
629[ 12.553301] Bluetooth: SCO socket layer initialized
630[ 12.563546] Bluetooth: RFCOMM TTY layer initialized
631[ 12.563574] Bluetooth: RFCOMM socket layer initialized
632[ 12.563579] Bluetooth: RFCOMM ver 1.11
633[ 12.581901] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
634[ 12.581911] Bluetooth: BNEP filters: protocol multicast
635[ 12.581929] Bluetooth: BNEP socket layer initialized
636[ 12.954541] ppdev: user-space parallel port driver
637[ 13.060040] init: avahi-cups-reload main process (796) terminated with status 1
638[ 13.768443] init: udev-fallback-graphics main process (948) terminated with status 1
639[ 14.005542] IPv6: ADDRCONF(NETDEV_UP): eth12: link is not ready
640[ 14.006211] IPv6: ADDRCONF(NETDEV_UP): eth12: link is not ready
641[ 15.261974] fglrx_pci 0000:00:01.0: irq 80 for MSI/MSI-X
642[ 15.264772] <6>[fglrx] Firegl kernel thread PID: 1038
643[ 15.264990] <6>[fglrx] Firegl kernel thread PID: 1039
644[ 15.265205] <6>[fglrx] Firegl kernel thread PID: 1040
645[ 15.265472] <6>[fglrx] IRQ 80 Enabled
646[ 15.281199] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
647[ 15.281206] <6>[fglrx] Reserved FB block: Unshared offset:fc57000, size:3000
648[ 15.281211] <6>[fglrx] Reserved FB block: Unshared offset:fc5a000, size:3a6000
649[ 15.281216] <6>[fglrx] Reserved FB block: Unshared offset:1ffc8000, size:38000
650[ 16.002909] r8168: eth12: link up
651[ 16.002951] IPv6: ADDRCONF(NETDEV_CHANGE): eth12: link becomes ready