Gitiles
Code Review Sign In
review.coreboot.org / board-status / fbdf212247eecd8b6578982391bbb694f060245a / . / emulation / qemu-q35 / 4.3-67-g5ea87ff / 2016-02-03T17_54_21Z / kernel_log.txt
blob: 4646dbd2849b1f2dcca785e6bf30e25e1c96c08f [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand16fc34b2016-02-03 18:08:36 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
BSI coreboot laba9cb8412016-02-03 18:10:30 +0000[diff] [blame]5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
Raptor Engineering Automated Coreboot Test Stand16fc34b2016-02-03 18:08:36 +0000[diff] [blame]6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
BSI coreboot laba9cb8412016-02-03 18:10:30 +0000[diff] [blame]15[ 0.000000] DMI: Qemu q35/q35, BIOS RAPTOR-NORMAL 12/01/2015
Raptor Engineering Automated Coreboot Test Stand16fc34b2016-02-03 18:08:36 +0000[diff] [blame]16[ 0.000000] Hypervisor detected: KVM
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges disabled:
23[ 0.000000] 00000-FFFFF uncachable
24[ 0.000000] MTRR variable ranges disabled:
25[ 0.000000] 0 disabled
26[ 0.000000] 1 disabled
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
BSI coreboot laba9cb8412016-02-03 18:10:30 +0000[diff] [blame]33[ 0.000000] PAT not supported by CPU.
Raptor Engineering Automated Coreboot Test Stand16fc34b2016-02-03 18:08:36 +0000[diff] [blame]34[ 0.000000] CPU MTRRs all blank - virtualized system.
35[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
36[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
37[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
38[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
39[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
40[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
41[ 0.000000] init_memory_mapping: [mem 0x1f200000-0x1f3fffff]
42[ 0.000000] [mem 0x1f200000-0x1f3fffff] page 2M
43[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1f1fffff]
44[ 0.000000] [mem 0x1c000000-0x1f1fffff] page 2M
45[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
46[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
47[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
48[ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1ff9ffff]
49[ 0.000000] [mem 0x1f400000-0x1fdfffff] page 2M
50[ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k
51[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
BSI coreboot laba9cb8412016-02-03 18:10:30 +0000[diff] [blame]52[ 0.000000] RAMDISK: [mem 0x1f5f2000-0x1fe7bfff]
Raptor Engineering Automated Coreboot Test Stand16fc34b2016-02-03 18:08:36 +0000[diff] [blame]53[ 0.000000] ACPI: Early table checksum verification disabled
BSI coreboot laba9cb8412016-02-03 18:10:30 +0000[diff] [blame]54[ 0.000000] ACPI: RSDP 0x00000000000F1900 000024 (v02 CORE )
Raptor Engineering Automated Coreboot Test Stand16fc34b2016-02-03 18:08:36 +0000[diff] [blame]55[ 0.000000] ACPI: XSDT 0x000000001FFB90E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: FACP 0x000000001FFBADC0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
BSI coreboot laba9cb8412016-02-03 18:10:30 +0000[diff] [blame]57[ 0.000000] ACPI: DSDT 0x000000001FFB9280 001B38 (v01 CORE COREBOOT 00000002 INTL 20150204)
Raptor Engineering Automated Coreboot Test Stand16fc34b2016-02-03 18:08:36 +0000[diff] [blame]58[ 0.000000] ACPI: FACS 0x000000001FFB9240 000040
59[ 0.000000] ACPI: MCFG 0x000000001FFBAEC0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: TCPA 0x000000001FFBAF00 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: APIC 0x000000001FFBAF40 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: HPET 0x000000001FFBAFA0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: Local APIC address 0xfee00000
64[ 0.000000] No NUMA configuration found
65[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff]
66[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff]
67[ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff]
68[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
69[ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock
70[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e400000-ffff88001ebfffff] on node 0
71[ 0.000000] Zone ranges:
72[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
73[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
74[ 0.000000] Normal empty
75[ 0.000000] Movable zone start for each node
76[ 0.000000] Early memory node ranges
77[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
78[ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff]
79[ 0.000000] On node 0 totalpages: 130878
80[ 0.000000] DMA zone: 56 pages used for memmap
81[ 0.000000] DMA zone: 21 pages reserved
82[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
83[ 0.000000] DMA32 zone: 1735 pages used for memmap
84[ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31
85[ 0.000000] ACPI: PM-Timer IO Port: 0x608
86[ 0.000000] ACPI: Local APIC address 0xfee00000
87[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
88[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
89[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
90[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
91[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
92[ 0.000000] ACPI: IRQ0 used by override.
93[ 0.000000] ACPI: IRQ2 used by override.
94[ 0.000000] ACPI: IRQ9 used by override.
95[ 0.000000] Using ACPI (MADT) for SMP configuration information
96[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
97[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
98[ 0.000000] nr_irqs_gsi: 40
99[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
100[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
101[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
102[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
103[ 0.000000] Booting paravirtualized kernel on KVM
104[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
105[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f200000 s80896 r8192 d21504 u2097152
106[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
107[ 0.000000] pcpu-alloc: [0] 0
108[ 0.000000] KVM setup async PF for cpu 0
109[ 0.000000] kvm-stealtime: cpu 0, msr 1f20d080
110[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066
111[ 0.000000] Policy zone: DMA32
BSI coreboot laba9cb8412016-02-03 18:10:30 +0000[diff] [blame]112[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
Raptor Engineering Automated Coreboot Test Stand16fc34b2016-02-03 18:08:36 +0000[diff] [blame]113[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
114[ 0.000000] AGP: Checking aperture...
115[ 0.000000] AGP: No AGP bridge found
116[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
117[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
118[ 0.000000] Memory: 494868K/523512K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 28644K reserved)
119[ 0.000000] Hierarchical RCU implementation.
120[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
121[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
122[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
123[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
124[ 0.000000] Console: colour VGA+ 80x25
125[ 0.000000] console [ttyS0] enabled
126[ 0.000000] hpet clockevent registered
BSI coreboot laba9cb8412016-02-03 18:10:30 +0000[diff] [blame]127[ 0.000000] tsc: Detected 2393.998 MHz processor
128[ 0.008000] Calibrating delay loop (skipped) preset value.. 4787.99 BogoMIPS (lpj=9575992)
Raptor Engineering Automated Coreboot Test Stand16fc34b2016-02-03 18:08:36 +0000[diff] [blame]129[ 0.008000] pid_max: default: 32768 minimum: 301
BSI coreboot laba9cb8412016-02-03 18:10:30 +0000[diff] [blame]130[ 0.008012] ACPI: Core revision 20140424
131[ 0.009954] ACPI: All ACPI Tables successfully acquired
132[ 0.011288] Security Framework initialized
133[ 0.012011] AppArmor: AppArmor disabled by boot time parameter
134[ 0.013419] Yama: disabled by default; enable with sysctl kernel.yama.*
135[ 0.015051] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
136[ 0.016103] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
137[ 0.017817] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
138[ 0.020007] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
139[ 0.021882] Initializing cgroup subsys memory
140[ 0.022960] Initializing cgroup subsys devices
141[ 0.024013] Initializing cgroup subsys freezer
142[ 0.025105] Initializing cgroup subsys net_cls
143[ 0.026188] Initializing cgroup subsys blkio
144[ 0.028009] Initializing cgroup subsys perf_event
145[ 0.029170] Initializing cgroup subsys net_prio
146[ 0.030334] mce: CPU supports 10 MCE banks
147[ 0.031372] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Raptor Engineering Automated Coreboot Test Stand16fc34b2016-02-03 18:08:36 +0000[diff] [blame]148Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
BSI coreboot laba9cb8412016-02-03 18:10:30 +0000[diff] [blame]149tlb_flushall_shift: 6
150[ 0.043313] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
151[ 0.048235] ftrace: allocating 21601 entries in 85 pages
152[ 0.056967] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
153[ 0.058343] smpboot: CPU0: Intel QEMU Virtual CPU version 2.0.0 (fam: 06, model: 02, stepping: 03)
154[ 0.064000] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.
155[ 0.064000] x86: Booted up 1 node, 1 CPUs
156[ 0.064003] smpboot: Total of 1 processors activated (4787.99 BogoMIPS)
157[ 0.065870] NMI watchdog: disabled (cpu0): hardware events not enabled
158[ 0.067481] devtmpfs: initialized
159[ 0.073064] pinctrl core: initialized pinctrl subsystem
160[ 0.074368] NET: Registered protocol family 16
161[ 0.075531] cpuidle: using governor ladder
162[ 0.076012] cpuidle: using governor menu
163[ 0.077005] ACPI: bus type PCI registered
164[ 0.077954] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
165[ 0.080100] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
166[ 0.082285] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
167[ 0.084345] PCI: Using configuration type 1 for base access
168[ 0.086398] ACPI: Added _OSI(Module Device)
169[ 0.087403] ACPI: Added _OSI(Processor Device)
170[ 0.088003] ACPI: Added _OSI(3.0 _SCP Extensions)
171[ 0.089205] ACPI: Added _OSI(Processor Aggregator Device)
172[ 0.093236] ACPI: Interpreter enabled
173[ 0.094117] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
174[ 0.096004] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
175[ 0.098207] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
176[ 0.100549] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
177[ 0.102746] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
178[ 0.104531] ACPI: (supports S0)
179[ 0.105270] ACPI: Using IOAPIC for interrupt routing
180[ 0.106453] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
181[ 0.109766] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
182[ 0.112006] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
183[ 0.114121] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
184[ 0.116102] PCI host bridge to bus 0000:00
185[ 0.117075] pci_bus 0000:00: root bus resource [bus 00-ff]
186[ 0.118359] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
187[ 0.120004] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
188[ 0.121456] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
189[ 0.123055] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
190[ 0.124035] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
191[ 0.124316] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
192[ 0.126587] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
193[ 0.129064] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
194[ 0.140004] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
195[ 0.140140] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
196[ 0.142112] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
197[ 0.144004] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
198[ 0.153982] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
199[ 0.154268] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
200[ 0.154554] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
201[ 0.156020] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
202[ 0.157872] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
203[ 0.168004] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
204[ 0.169956] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
205[ 0.172304] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
206[ 0.172456] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
207[ 0.172877] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
208[ 0.174417] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
209[ 0.176151] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
210[ 0.177694] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
211[ 0.179227] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
212[ 0.180499] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
213[ 0.182035] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
214[ 0.183568] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
215[ 0.184426] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
216[ 0.185684] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
217[ 0.186944] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
218[ 0.188206] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
219[ 0.189466] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
220[ 0.190729] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
221[ 0.192205] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
222[ 0.193459] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
223[ 0.194890] ACPI: Enabled 16 GPEs in block 00 to 3F
224[ 0.196101] vgaarb: setting as boot device: PCI:0000:00:01.0
225[ 0.197421] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
226[ 0.200003] vgaarb: loaded
227[ 0.200655] vgaarb: bridge control possible 0000:00:01.0
228[ 0.201946] PCI: Using ACPI for IRQ routing
229[ 0.249178] PCI: pci_cache_line_size set to 64 bytes
230[ 0.249253] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
231[ 0.249255] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff]
232[ 0.249393] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
233[ 0.250156] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
234[ 0.250685] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
235[ 0.255150] Switched to clocksource kvm-clock
236[ 0.257624] pnp: PnP ACPI init
237[ 0.258143] ACPI: bus type PNP registered
238[ 0.258834] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
239[ 0.258887] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
240[ 0.258933] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
241[ 0.259031] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
242[ 0.259101] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
243[ 0.259366] pnp: PnP ACPI: found 5 devices
244[ 0.260042] ACPI: bus type PNP unregistered
245[ 0.266918] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
246[ 0.267891] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
247[ 0.267893] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
248[ 0.267895] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
249[ 0.267896] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
250[ 0.267920] NET: Registered protocol family 2
251[ 0.268777] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
252[ 0.269901] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
253[ 0.270905] TCP: Hash tables configured (established 4096 bind 4096)
254[ 0.271896] TCP: reno registered
255[ 0.272427] UDP hash table entries: 256 (order: 1, 8192 bytes)
256[ 0.273344] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
257[ 0.274348] NET: Registered protocol family 1
258[ 0.275059] pci 0000:00:01.0: Video device with shadowed ROM
259[ 0.275096] PCI: CLS 64 bytes, default 64
260[ 0.275134] Unpacking initramfs...
261[ 0.435913] Freeing initrd memory: 8744K (ffff88001f5f2000 - ffff88001fe7c000)
262[ 0.437287] microcode: CPU0 sig=0x623, pf=0x0, revision=0x1
263[ 0.438205] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
264[ 0.439776] futex hash table entries: 256 (order: 2, 16384 bytes)
265[ 0.440769] audit: initializing netlink subsys (disabled)
266[ 0.441643] audit: type=2000 audit(1454522748.711:1): initialized
267[ 0.442843] HugeTLB registered 2 MB page size, pre-allocated 0 pages
268[ 0.443859] zbud: loaded
269[ 0.444428] VFS: Disk quotas dquot_6.5.2
270[ 0.445064] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
271[ 0.446120] msgmni has been set to 983
272[ 0.446958] alg: No test for stdrng (krng)
273[ 0.447633] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
274[ 0.448845] io scheduler noop registered
275[ 0.449478] io scheduler deadline registered
276[ 0.450168] io scheduler cfq registered (default)
277[ 0.450963] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
278[ 0.451857] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
279[ 0.452948] intel_idle: does not run on family 6 model 2
280[ 0.452972] GHES: HEST is not enabled!
281[ 0.453645] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
282[ 0.480969] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
283[ 0.482433] Linux agpgart interface v0.103
284[ 0.483184] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
285[ 0.485064] serio: i8042 KBD port at 0x60,0x64 irq 1
286[ 0.485847] serio: i8042 AUX port at 0x60,0x64 irq 12
287[ 0.486791] mousedev: PS/2 mouse device common for all mice
288[ 0.487915] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
289[ 0.489459] rtc_cmos 00:00: RTC can wake from S4
290[ 0.490414] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
291[ 0.491508] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
292[ 0.492739] ledtrig-cpu: registered to indicate activity on CPUs
293[ 0.493739] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
294[ 0.494743] AMD IOMMUv2 functionality not available on this system
295[ 0.495787] TCP: cubic registered
296[ 0.496349] NET: Registered protocol family 10
297[ 0.497205] mip6: Mobile IPv6
298[ 0.497688] NET: Registered protocol family 17
299[ 0.498386] mpls_gso: MPLS GSO support
300[ 0.499163] registered taskstats version 1
301[ 0.500080] rtc_cmos 00:00: setting system clock to 2016-02-03 18:05:48 UTC (1454522748)
302[ 0.501374] PM: Hibernation image not present or could not be loaded.
303[ 0.502395] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
304[ 0.503628] Write protecting the kernel read-only data: 8192k
305[ 0.506661] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
306[ 0.508439] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
307[ 0.516106] systemd-udevd[52]: starting version 215
308[ 0.517130] random: systemd-udevd urandom read with 2 bits of entropy available
309[ 0.524955] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
310[ 0.526075] e1000: Copyright (c) 1999-2006 Intel Corporation.
311[ 0.527252] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
312[ 0.868725] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
313[ 0.869861] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
314[ 0.876623] FS-Cache: Loaded
315[ 0.879592] RPC: Registered named UNIX socket transport module.
316[ 0.880601] RPC: Registered udp transport module.
317[ 0.881432] RPC: Registered tcp transport module.
318[ 0.882199] RPC: Registered tcp NFSv4.1 backchannel transport module.
319[ 0.886329] FS-Cache: Netfs 'nfs' registered for caching
320[ 0.894290] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
321[ 1.436142] tsc: Refined TSC clocksource calibration: 2394.003 MHz
322[ 2.896535] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
323[ 2.898223] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
324[ 3.383578] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
325[ 3.385694] systemd[1]: Detected virtualization 'kvm'.
326[ 3.386511] systemd[1]: Detected architecture 'x86-64'.
327[ 3.592819] systemd[1]: Inserted module 'autofs4'
328[ 3.595324] systemd[1]: Set hostname to <cb-test-tgt>.
329[ 3.686952] random: nonblocking pool is initialized
330[ 4.087781] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
331[ 4.089818] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
332[ 4.092378] systemd[1]: Expecting device dev-ttyS0.device...
333[ 4.094485] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
334[ 4.095729] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
335[ 4.096944] systemd[1]: Starting Remote File Systems (Pre).
336[ 4.099159] systemd[1]: Reached target Remote File Systems (Pre).
337[ 4.100171] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
338[ 4.103189] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
339[ 4.104691] systemd[1]: Starting Encrypted Volumes.
340[ 4.106725] systemd[1]: Reached target Encrypted Volumes.
341[ 4.107604] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
342[ 4.108910] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
343[ 4.110166] systemd[1]: Starting Paths.
344[ 4.111882] systemd[1]: Reached target Paths.
345[ 4.112621] systemd[1]: Starting Swap.
346[ 4.114313] systemd[1]: Reached target Swap.
347[ 4.115010] systemd[1]: Starting Root Slice.
348[ 4.116847] systemd[1]: Created slice Root Slice.
349[ 4.117616] systemd[1]: Starting User and Session Slice.
350[ 4.119734] systemd[1]: Created slice User and Session Slice.
351[ 4.120691] systemd[1]: Starting Delayed Shutdown Socket.
352[ 4.122871] systemd[1]: Listening on Delayed Shutdown Socket.
353[ 4.123782] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
354[ 4.127026] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
355[ 4.128161] systemd[1]: Starting Journal Socket (/dev/log).
356[ 4.130994] systemd[1]: Listening on Journal Socket (/dev/log).
357[ 4.131956] systemd[1]: Starting udev Kernel Socket.
358[ 4.134039] systemd[1]: Listening on udev Kernel Socket.
359[ 4.134890] systemd[1]: Starting udev Control Socket.
360[ 4.136982] systemd[1]: Listening on udev Control Socket.
361[ 4.137856] systemd[1]: Starting Journal Socket.
362[ 4.139800] systemd[1]: Listening on Journal Socket.
363[ 4.140620] systemd[1]: Starting System Slice.
364[ 4.142530] systemd[1]: Created slice System Slice.
365[ 4.143314] systemd[1]: Starting system-getty.slice.
366[ 4.145381] systemd[1]: Created slice system-getty.slice.
367[ 4.146247] systemd[1]: Starting system-serial\x2dgetty.slice.
368[ 4.148542] systemd[1]: Created slice system-serial\x2dgetty.slice.
369[ 4.149570] systemd[1]: Starting Increase datagram queue length...
370[ 4.160186] systemd[1]: Starting Load Kernel Modules...
371[ 4.162429] systemd[1]: Mounting Huge Pages File System...
372[ 4.166757] systemd[1]: Mounting POSIX Message Queue File System...
373[ 4.379320] systemd[1]: Started Set Up Additional Binary Formats.
374[ 4.383804] systemd[1]: Starting Create list of required static device nodes for the current kernel...
375[ 4.402204] systemd[1]: Mounting Debug File System...
376[ 4.409553] systemd[1]: Starting udev Coldplug all Devices...
377[ 4.423544] systemd[1]: Starting Slices.
378[ 4.445020] systemd[1]: Reached target Slices.
379[ 4.453361] systemd[1]: Starting Remount Root and Kernel File Systems...
380[ 4.496718] systemd[1]: Started Increase datagram queue length.
381[ 4.505040] systemd[1]: Started Load Kernel Modules.
382[ 4.520283] systemd[1]: Mounted POSIX Message Queue File System.
383[ 4.530153] systemd[1]: Mounted Huge Pages File System.
384[ 4.540502] systemd[1]: Mounted Debug File System.
385[ 4.546671] systemd[1]: Started Create list of required static device nodes for the current kernel.
386[ 4.553912] systemd[1]: Started Remount Root and Kernel File Systems.
387[ 4.574248] systemd[1]: Started udev Coldplug all Devices.
388[ 4.605502] systemd[1]: Started Various fixups to make systemd work better on Debian.
389[ 4.607469] systemd[1]: Starting Load/Save Random Seed...
390[ 4.610969] systemd[1]: Starting Create Static Device Nodes in /dev...
391[ 4.615464] systemd[1]: Starting Apply Kernel Variables...
392[ 4.623174] systemd[1]: Mounted Configuration File System.
393[ 4.625164] systemd[1]: Mounted FUSE Control File System.
394[ 4.629073] systemd[1]: Starting Syslog Socket.
395[ 4.642856] systemd[1]: Listening on Syslog Socket.
396[ 4.645725] systemd[1]: Starting Sockets.
397[ 4.652897] systemd[1]: Reached target Sockets.
398[ 4.654785] systemd[1]: Starting Journal Service...
399[ 4.666145] systemd[1]: Started Journal Service.
400[ 4.960817] systemd-udevd[124]: starting version 215
401[ 5.216314] systemd-journald[122]: Received request to flush runtime journal from PID 1
402[ 5.954335] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
403[ 5.962427] Floppy drive(s): fd0 is 1.44M
404[ 5.974298] ACPI: Power Button [PWRF]
405[ 5.990199] FDC 0 is a S82078B
406[ 6.037497] parport_pc 00:03: reported by Plug and Play ACPI
407[ 6.039622] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
408[ 6.044042] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
409[ 6.073974] SCSI subsystem initialized
410[ 6.089988] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
411[ 6.111225] [drm] Initialized drm 1.1.0 20060810
412[ 6.115822] i801_smbus 0000:00:1f.3: Enabling SMBus device
413[ 6.119825] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
414[ 6.122224] input: PC Speaker as /devices/platform/pcspkr/input/input4
415[ 6.188057] libata version 3.00 loaded.
416[ 6.238877] ahci 0000:00:1f.2: version 3.0
417[ 6.239468] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
418[ 6.239884] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
419[ 6.241664] ahci 0000:00:1f.2: flags: ncq only
420[ 6.263238] scsi0 : ahci
421[ 6.276970] scsi1 : ahci
422[ 6.289657] scsi2 : ahci
423[ 6.305774] scsi3 : ahci
424[ 6.330362] scsi4 : ahci
425[ 6.348766] scsi5 : ahci
426[ 6.350024] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
427[ 6.352401] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
428[ 6.354838] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
429[ 6.357033] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
430[ 6.359266] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
431[ 6.361069] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
432[ 6.388063] iTCO_vendor_support: vendor-support=0
433[ 6.389812] ppdev: user-space parallel port driver
434[ 6.397568] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
435[ 6.399141] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
436[ 6.400706] iTCO_wdt: timeout value out of range, using 30
437[ 6.408463] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
438[ 6.681267] ata1: SATA link down (SStatus 0 SControl 300)
439[ 6.697512] ata2: SATA link down (SStatus 0 SControl 300)
440[ 6.703440] ata3: SATA link down (SStatus 0 SControl 300)
441[ 6.712224] ata4: SATA link down (SStatus 0 SControl 300)
442[ 6.727590] ata5: SATA link down (SStatus 0 SControl 300)
443[ 6.729520] ata6: SATA link down (SStatus 0 SControl 300)
444[ 6.971860] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
445[ 7.680197] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
446[ 38.219146] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
447[ 195.464137] nfs: server 10.100.1.1 not responding, still trying
448[ 198.293429] nfs: server 10.100.1.1 OK