Gitiles
Code Review Sign In
review.coreboot.org / board-status / fbdf212247eecd8b6578982391bbb694f060245a / . / emulation / qemu-q35 / 4.0-9670-ge7db9dd / 2015-05-13T20:55:50Z / kernel_log.txt
blob: 2fd63aa72cfe338ce2439ad549209093182c7a50 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand1ea0aa92015-05-14 00:24:04 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffaffff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000001ffb0000-0x000000001fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
Raptor Engineering Automated Coreboot Test Stande5322d92015-05-14 03:03:10 +0000[diff] [blame]15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9670-ge7db9dd-dirty 05/13/2015
Raptor Engineering Automated Coreboot Test Stand1ea0aa92015-05-14 00:24:04 +0000[diff] [blame]16[ 0.000000] Hypervisor detected: KVM
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x1ffb0 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges disabled:
23[ 0.000000] 00000-FFFFF uncachable
24[ 0.000000] MTRR variable ranges disabled:
25[ 0.000000] 0 disabled
26[ 0.000000] 1 disabled
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
34[ 0.000000] CPU MTRRs all blank - virtualized system.
35[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
36[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
37[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
38[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
39[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
40[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
41[ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1f5fffff]
42[ 0.000000] [mem 0x1f400000-0x1f5fffff] page 2M
43[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1f3fffff]
44[ 0.000000] [mem 0x1c000000-0x1f3fffff] page 2M
45[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
46[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
47[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
48[ 0.000000] init_memory_mapping: [mem 0x1f600000-0x1ffaffff]
49[ 0.000000] [mem 0x1f600000-0x1fdfffff] page 2M
50[ 0.000000] [mem 0x1fe00000-0x1ffaffff] page 4k
51[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
52[ 0.000000] RAMDISK: [mem 0x1f602000-0x1fe8bfff]
53[ 0.000000] ACPI: Early table checksum verification disabled
54[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
55[ 0.000000] ACPI: XSDT 0x000000001FFB90E0 000044 (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: FACP 0x000000001FFBAD90 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: DSDT 0x000000001FFB9250 001B37 (v01 CORE COREBOOT 00000002 INTL 20150204)
58[ 0.000000] ACPI: FACS 0x000000001FFB9210 000040
59[ 0.000000] ACPI: MCFG 0x000000001FFBAE90 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: APIC 0x000000001FFBAED0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: HPET 0x000000001FFBAF30 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: Local APIC address 0xfee00000
63[ 0.000000] No NUMA configuration found
64[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffaffff]
65[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ffaffff]
66[ 0.000000] NODE_DATA [mem 0x1ffab000-0x1ffaffff]
67[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
68[ 0.000000] kvm-clock: cpu 0, msr 0:1ffa3001, primary cpu clock
69[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e600000-ffff88001edfffff] on node 0
70[ 0.000000] Zone ranges:
71[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
72[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
73[ 0.000000] Normal empty
74[ 0.000000] Movable zone start for each node
75[ 0.000000] Early memory node ranges
76[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
77[ 0.000000] node 0: [mem 0x00100000-0x1ffaffff]
78[ 0.000000] On node 0 totalpages: 130894
79[ 0.000000] DMA zone: 56 pages used for memmap
80[ 0.000000] DMA zone: 21 pages reserved
81[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
82[ 0.000000] DMA32 zone: 1735 pages used for memmap
83[ 0.000000] DMA32 zone: 126896 pages, LIFO batch:31
84[ 0.000000] ACPI: PM-Timer IO Port: 0x608
85[ 0.000000] ACPI: Local APIC address 0xfee00000
86[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
87[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
88[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
89[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
90[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
91[ 0.000000] ACPI: IRQ0 used by override.
92[ 0.000000] ACPI: IRQ2 used by override.
93[ 0.000000] ACPI: IRQ9 used by override.
94[ 0.000000] Using ACPI (MADT) for SMP configuration information
95[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
96[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
97[ 0.000000] nr_irqs_gsi: 40
98[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
99[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
100[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
101[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
102[ 0.000000] Booting paravirtualized kernel on KVM
103[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
104[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f400000 s80896 r8192 d21504 u2097152
105[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
106[ 0.000000] pcpu-alloc: [0] 0
107[ 0.000000] KVM setup async PF for cpu 0
108[ 0.000000] kvm-stealtime: cpu 0, msr 1f40d080
109[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129082
110[ 0.000000] Policy zone: DMA32
111[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
112[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
113[ 0.000000] AGP: Checking aperture...
114[ 0.000000] AGP: No AGP bridge found
115[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
116[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
117[ 0.000000] Memory: 494932K/523576K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 28644K reserved)
118[ 0.000000] Hierarchical RCU implementation.
119[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
120[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
121[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
122[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
123[ 0.000000] Console: colour VGA+ 80x25
124[ 0.000000] console [tty0] enabled
125[ 0.000000] console [ttyS0] enabled
126[ 0.000000] hpet clockevent registered
127[ 0.000000] tsc: Detected 2311.846 MHz processor
128[ 0.008000] Calibrating delay loop (skipped) preset value.. 4623.69 BogoMIPS (lpj=9247384)
129[ 0.008000] pid_max: default: 32768 minimum: 301
Raptor Engineering Automated Coreboot Test Stande5322d92015-05-14 03:03:10 +0000[diff] [blame]130[ 0.008017] ACPI: Core revision 20140424
131[ 0.010718] ACPI: All ACPI Tables successfully acquired
132[ 0.013426] Security Framework initialized
133[ 0.014860] AppArmor: AppArmor disabled by boot time parameter
134[ 0.016009] Yama: disabled by default; enable with sysctl kernel.yama.*
135[ 0.017658] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
136[ 0.019468] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
137[ 0.020118] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
138[ 0.021607] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
139[ 0.024299] Initializing cgroup subsys memory
140[ 0.025503] Initializing cgroup subsys devices
141[ 0.026686] Initializing cgroup subsys freezer
Raptor Engineering Automated Coreboot Test Stand1ea0aa92015-05-14 00:24:04 +0000[diff] [blame]142[ 0.028007] Initializing cgroup subsys net_cls
Raptor Engineering Automated Coreboot Test Stande5322d92015-05-14 03:03:10 +0000[diff] [blame]143[ 0.029193] Initializing cgroup subsys blkio
144[ 0.030318] Initializing cgroup subsys perf_event
145[ 0.032013] Initializing cgroup subsys net_prio
146[ 0.033327] mce: CPU supports 10 MCE banks
147[ 0.034575] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Raptor Engineering Automated Coreboot Test Stand1ea0aa92015-05-14 00:24:04 +0000[diff] [blame]148Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
149tlb_flushall_shift: -1
Raptor Engineering Automated Coreboot Test Stande5322d92015-05-14 03:03:10 +0000[diff] [blame]150[ 0.047679] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
151[ 0.054256] ftrace: allocating 21601 entries in 85 pages
152[ 0.064263] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
153[ 0.065719] smpboot: CPU0: AMD QEMU Virtual CPU version 2.1.2 (fam: 06, model: 02, stepping: 03)
154[ 0.072000] Performance Events: Broken PMU hardware detected, using software events only.
155[ 0.072000] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
156[ 0.074169] x86: Booted up 1 node, 1 CPUs
157[ 0.075317] smpboot: Total of 1 processors activated (4623.69 BogoMIPS)
158[ 0.076597] NMI watchdog: disabled (cpu0): hardware events not enabled
159[ 0.078246] devtmpfs: initialized
160[ 0.086612] pinctrl core: initialized pinctrl subsystem
161[ 0.087989] NET: Registered protocol family 16
162[ 0.088181] cpuidle: using governor ladder
163[ 0.089347] cpuidle: using governor menu
164[ 0.090559] ACPI: bus type PCI registered
165[ 0.092003] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
166[ 0.093658] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
167[ 0.096013] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
168[ 0.098070] PCI: Using configuration type 1 for base access
169[ 0.101059] ACPI: Added _OSI(Module Device)
170[ 0.102248] ACPI: Added _OSI(Processor Device)
171[ 0.103422] ACPI: Added _OSI(3.0 _SCP Extensions)
172[ 0.104002] ACPI: Added _OSI(Processor Aggregator Device)
173[ 0.110323] ACPI: Interpreter enabled
174[ 0.111410] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
175[ 0.113801] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
176[ 0.116012] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
177[ 0.118512] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
178[ 0.120804] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
179[ 0.123300] ACPI: (supports S0)
180[ 0.124012] ACPI: Using IOAPIC for interrupt routing
181[ 0.125307] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
182[ 0.130751] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
183[ 0.132009] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
184[ 0.134390] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
185[ 0.136127] PCI host bridge to bus 0000:00
186[ 0.137313] pci_bus 0000:00: root bus resource [bus 00-ff]
187[ 0.138623] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
188[ 0.140012] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
189[ 0.141448] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
190[ 0.144012] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
191[ 0.145600] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
192[ 0.146058] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
193[ 0.149590] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
194[ 0.152007] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
195[ 0.173351] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
196[ 0.173593] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
197[ 0.176010] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
198[ 0.178432] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
199[ 0.191620] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
200[ 0.192481] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
201[ 0.192913] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
202[ 0.195153] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
203[ 0.196259] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
204[ 0.208007] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
205[ 0.210361] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
206[ 0.213608] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
207[ 0.213836] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
208[ 0.214457] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
209[ 0.216971] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
210[ 0.220135] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
211[ 0.225143] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
212[ 0.227018] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
213[ 0.229230] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
214[ 0.231307] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
215[ 0.233199] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
216[ 0.235094] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
217[ 0.236811] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
218[ 0.238414] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
219[ 0.240019] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
220[ 0.241638] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
221[ 0.243273] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
222[ 0.244814] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
223[ 0.246404] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
224[ 0.248291] ACPI: Enabled 16 GPEs in block 00 to 3F
225[ 0.249970] vgaarb: setting as boot device: PCI:0000:00:01.0
226[ 0.251345] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
227[ 0.252003] vgaarb: loaded
228[ 0.253101] vgaarb: bridge control possible 0000:00:01.0
229[ 0.256076] PCI: Using ACPI for IRQ routing
230[ 0.311439] PCI: pci_cache_line_size set to 64 bytes
231[ 0.311544] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
232[ 0.311548] e820: reserve RAM buffer [mem 0x1ffb0000-0x1fffffff]
233[ 0.311754] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
234[ 0.312022] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
235[ 0.313707] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
236[ 0.320022] Switched to clocksource kvm-clock
237[ 0.332126] pnp: PnP ACPI init
238[ 0.333193] ACPI: bus type PNP registered
239[ 0.334788] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
240[ 0.334872] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
241[ 0.334936] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
242[ 0.335075] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
243[ 0.335161] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
244[ 0.335541] pnp: PnP ACPI: found 5 devices
245[ 0.336702] ACPI: bus type PNP unregistered
246[ 0.345347] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
247[ 0.346919] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
248[ 0.346922] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
249[ 0.346924] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
250[ 0.346926] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
251[ 0.346965] NET: Registered protocol family 2
252[ 0.348382] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
253[ 0.350023] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
254[ 0.351485] TCP: Hash tables configured (established 4096 bind 4096)
255[ 0.352996] TCP: reno registered
256[ 0.354031] UDP hash table entries: 256 (order: 1, 8192 bytes)
257[ 0.355373] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
258[ 0.356864] NET: Registered protocol family 1
259[ 0.358073] pci 0000:00:01.0: Video device with shadowed ROM
260[ 0.358133] PCI: CLS 64 bytes, default 64
261[ 0.358198] Unpacking initramfs...
262[ 0.561287] Freeing initrd memory: 8744K (ffff88001f602000 - ffff88001fe8c000)
263[ 0.563646] microcode: AMD CPU family 0x6 not supported
264[ 0.565350] futex hash table entries: 256 (order: 2, 16384 bytes)
265[ 0.567237] audit: initializing netlink subsys (disabled)
266[ 0.568665] audit: type=2000 audit(1431572039.237:1): initialized
267[ 0.570517] HugeTLB registered 2 MB page size, pre-allocated 0 pages
268[ 0.572571] zbud: loaded
269[ 0.573610] VFS: Disk quotas dquot_6.5.2
270[ 0.574763] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
271[ 0.576334] msgmni has been set to 983
272[ 0.578050] alg: No test for stdrng (krng)
273[ 0.579262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
274[ 0.581384] io scheduler noop registered
275[ 0.582535] io scheduler deadline registered
276[ 0.583701] io scheduler cfq registered (default)
277[ 0.585042] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
278[ 0.586865] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
279[ 0.588979] GHES: HEST is not enabled!
280[ 0.590451] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
281[ 0.897454] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
282[ 0.900181] Linux agpgart interface v0.103
283[ 0.901466] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
284[ 0.904612] serio: i8042 KBD port at 0x60,0x64 irq 1
285[ 0.905907] serio: i8042 AUX port at 0x60,0x64 irq 12
286[ 0.907280] mousedev: PS/2 mouse device common for all mice
287[ 0.909404] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
288[ 0.911838] rtc_cmos 00:00: RTC can wake from S4
289[ 0.913455] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
290[ 0.915128] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
291[ 0.917263] ledtrig-cpu: registered to indicate activity on CPUs
292[ 0.918793] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
293[ 0.920292] AMD IOMMUv2 functionality not available on this system
294[ 0.921874] TCP: cubic registered
295[ 0.922868] NET: Registered protocol family 10
296[ 0.924307] mip6: Mobile IPv6
297[ 0.925307] NET: Registered protocol family 17
298[ 0.926483] mpls_gso: MPLS GSO support
299[ 0.927799] registered taskstats version 1
300[ 0.929326] rtc_cmos 00:00: setting system clock to 2015-05-14 02:53:59 UTC (1431572039)
301[ 0.931608] PM: Hibernation image not present or could not be loaded.
302[ 0.933405] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
303[ 0.935539] Write protecting the kernel read-only data: 8192k
304[ 0.939781] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
305[ 0.942643] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
306[ 0.956278] systemd-udevd[52]: starting version 215
307[ 0.957982] random: systemd-udevd urandom read with 2 bits of entropy available
308[ 0.970952] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
309[ 0.972689] e1000: Copyright (c) 1999-2006 Intel Corporation.
310[ 0.982514] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
311[ 1.372197] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
312[ 1.373858] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
313[ 1.382341] FS-Cache: Loaded
314[ 1.387063] RPC: Registered named UNIX socket transport module.
315[ 1.388601] RPC: Registered udp transport module.
316[ 1.389829] RPC: Registered tcp transport module.
317[ 1.390993] RPC: Registered tcp NFSv4.1 backchannel transport module.
318[ 1.396984] FS-Cache: Netfs 'nfs' registered for caching
319[ 1.408092] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
320[ 1.560067] tsc: Refined TSC clocksource calibration: 2312.026 MHz
321[ 3.412871] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
322[ 3.417296] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
323[ 13.432574] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
324[ 13.439357] systemd[1]: Detected virtualization 'kvm'.
325[ 13.441959] systemd[1]: Detected architecture 'x86-64'.
326[ 14.604152] random: nonblocking pool is initialized
327[ 15.670606] systemd[1]: Inserted module 'autofs4'
328[ 15.677498] systemd[1]: Set hostname to <cb-test-tgt>.
329[ 18.980313] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
330[ 18.985372] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
331[ 18.989695] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
332[ 18.991825] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
333[ 18.993993] systemd[1]: Expecting device dev-ttyS0.device...
334[ 18.996743] systemd[1]: Starting Remote File Systems (Pre).
335[ 19.000057] systemd[1]: Reached target Remote File Systems (Pre).
336[ 19.001952] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
337[ 19.004708] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
338[ 19.007380] systemd[1]: Starting Paths.
339[ 19.010144] systemd[1]: Reached target Paths.
340[ 19.011602] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
341[ 19.016526] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
342[ 19.019464] systemd[1]: Starting Encrypted Volumes.
343[ 19.022508] systemd[1]: Reached target Encrypted Volumes.
344[ 19.024255] systemd[1]: Starting Swap.
345[ 19.026858] systemd[1]: Reached target Swap.
346[ 19.028343] systemd[1]: Starting Root Slice.
347[ 19.031256] systemd[1]: Created slice Root Slice.
348[ 19.032804] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
349[ 19.037842] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
350[ 19.039900] systemd[1]: Starting Delayed Shutdown Socket.
351[ 19.043047] systemd[1]: Listening on Delayed Shutdown Socket.
352[ 19.044850] systemd[1]: Starting Journal Socket (/dev/log).
353[ 19.049892] systemd[1]: Listening on Journal Socket (/dev/log).
354[ 19.051280] systemd[1]: Starting udev Control Socket.
355[ 19.053823] systemd[1]: Listening on udev Control Socket.
356[ 19.055111] systemd[1]: Starting udev Kernel Socket.
357[ 19.057794] systemd[1]: Listening on udev Kernel Socket.
358[ 19.059039] systemd[1]: Starting User and Session Slice.
359[ 19.061669] systemd[1]: Created slice User and Session Slice.
360[ 19.063944] systemd[1]: Starting Journal Socket.
361[ 19.068128] systemd[1]: Listening on Journal Socket.
362[ 19.070009] systemd[1]: Starting System Slice.
363[ 19.072569] systemd[1]: Created slice System Slice.
364[ 19.073884] systemd[1]: Starting Increase datagram queue length...
365[ 19.077162] systemd[1]: Mounting Huge Pages File System...
366[ 19.081357] systemd[1]: Mounting POSIX Message Queue File System...
367[ 19.103239] systemd[1]: Starting Create list of required static device nodes for the current kernel...
368[ 19.112285] systemd[1]: Mounting Debug File System...
369[ 19.497201] systemd[1]: Started Set Up Additional Binary Formats.
370[ 20.918711] systemd[1]: Starting Load Kernel Modules...
371[ 20.925761] systemd[1]: Starting udev Coldplug all Devices...
372[ 20.931622] systemd[1]: Starting system-getty.slice.
373[ 20.935037] systemd[1]: Created slice system-getty.slice.
374[ 20.936441] systemd[1]: Starting system-serial\x2dgetty.slice.
375[ 20.939361] systemd[1]: Created slice system-serial\x2dgetty.slice.
376[ 20.940876] systemd[1]: Starting Slices.
377[ 20.943341] systemd[1]: Reached target Slices.
378[ 20.944599] systemd[1]: Starting Remount Root and Kernel File Systems...
379[ 20.950652] systemd[1]: Started Create list of required static device nodes for the current kernel.
380[ 20.959096] systemd[1]: Starting Create Static Device Nodes in /dev...
381[ 21.683620] systemd[1]: Started Increase datagram queue length.
382[ 21.686586] systemd[1]: Starting Syslog Socket.
383[ 21.689985] systemd[1]: Listening on Syslog Socket.
384[ 21.691492] systemd[1]: Starting Sockets.
385[ 21.694565] systemd[1]: Reached target Sockets.
386[ 21.695804] systemd[1]: Starting Journal Service...
387[ 21.702422] systemd[1]: Started Journal Service.
388[ 26.544214] systemd-udevd[125]: starting version 215
389[ 35.696087] nfs: server 10.100.1.1 not responding, still trying
390[ 35.706546] nfs: server 10.100.1.1 OK
391[ 36.656117] nfs: server 10.100.1.1 not responding, still trying
392[ 36.708177] nfs: server 10.100.1.1 not responding, still trying
393[ 36.711190] nfs: server 10.100.1.1 not responding, still trying
394[ 36.714238] nfs: server 10.100.1.1 not responding, still trying
395[ 36.717049] nfs: server 10.100.1.1 not responding, still trying
396[ 36.721227] nfs: server 10.100.1.1 not responding, still trying
397[ 36.723102] nfs: server 10.100.1.1 not responding, still trying
398[ 36.725036] nfs: server 10.100.1.1 not responding, still trying
399[ 36.726930] nfs: server 10.100.1.1 not responding, still trying
400[ 36.962611] nfs: server 10.100.1.1 OK
401[ 37.035063] nfs: server 10.100.1.1 OK
402[ 37.094625] nfs: server 10.100.1.1 OK
403[ 37.163803] nfs: server 10.100.1.1 OK
404[ 37.223714] nfs: server 10.100.1.1 OK
405[ 37.275042] nfs: server 10.100.1.1 OK
406[ 37.351253] nfs: server 10.100.1.1 OK
407[ 37.407472] nfs: server 10.100.1.1 OK
408[ 37.447517] nfs: server 10.100.1.1 OK
409[ 37.536085] nfs: server 10.100.1.1 not responding, still trying
410[ 37.592072] nfs: server 10.100.1.1 not responding, still trying
411[ 37.623567] nfs: server 10.100.1.1 OK
412[ 37.632788] nfs: server 10.100.1.1 OK
413[ 39.432103] nfs: server 10.100.1.1 not responding, still trying
414[ 39.434844] nfs: server 10.100.1.1 not responding, still trying
415[ 39.437735] nfs: server 10.100.1.1 not responding, still trying
416[ 39.441012] nfs: server 10.100.1.1 not responding, still trying
417[ 39.443551] nfs: server 10.100.1.1 not responding, still trying
418[ 39.446345] nfs: server 10.100.1.1 not responding, still trying
419[ 39.592100] nfs: server 10.100.1.1 not responding, still trying
420[ 39.594634] nfs: server 10.100.1.1 not responding, still trying
421[ 39.668105] nfs: server 10.100.1.1 not responding, still trying
422[ 39.728473] nfs: server 10.100.1.1 OK
423[ 39.740092] nfs: server 10.100.1.1 not responding, still trying
424[ 39.807113] nfs: server 10.100.1.1 OK
425[ 39.865546] nfs: server 10.100.1.1 OK
426[ 39.916961] nfs: server 10.100.1.1 OK
427[ 39.968514] nfs: server 10.100.1.1 OK
428[ 39.984185] nfs: server 10.100.1.1 OK
429[ 39.986784] nfs: server 10.100.1.1 OK
430[ 40.023401] nfs: server 10.100.1.1 OK
431[ 40.069980] nfs: server 10.100.1.1 OK
432[ 40.139976] nfs: server 10.100.1.1 OK
433[ 41.648077] nfs: server 10.100.1.1 not responding, still trying
434[ 41.665736] nfs: server 10.100.1.1 OK
435[ 43.218955] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
436[ 43.227138] ACPI: Power Button [PWRF]
437[ 43.498538] parport_pc 00:03: reported by Plug and Play ACPI
438[ 43.503363] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
439[ 43.681295] Floppy drive(s): fd0 is 1.44M
440[ 43.698456] input: PC Speaker as /devices/platform/pcspkr/input/input3
441[ 43.702388] FDC 0 is a S82078B
442[ 44.623370] SCSI subsystem initialized
443[ 44.770617] ppdev: user-space parallel port driver
444[ 45.087533] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
445[ 45.314750] [drm] Initialized drm 1.1.0 20060810
446[ 45.675579] libata version 3.00 loaded.
447[ 45.695838] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
448[ 45.699844] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
449[ 45.701686] i801_smbus 0000:00:1f.3: Enabling SMBus device
450[ 45.703783] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
451[ 47.044163] iTCO_vendor_support: vendor-support=0
452[ 47.140481] ahci 0000:00:1f.2: version 3.0
453[ 47.142411] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
454[ 47.143865] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
455[ 47.147934] ahci 0000:00:1f.2: flags: ncq only
456[ 47.153292] scsi0 : ahci
457[ 47.154433] scsi1 : ahci
458[ 47.155458] scsi2 : ahci
459[ 47.156722] scsi3 : ahci
460[ 47.157819] scsi4 : ahci
461[ 47.158848] scsi5 : ahci
462[ 47.159761] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
463[ 47.161873] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
464[ 47.164037] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
465[ 47.166046] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
466[ 47.168081] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
467[ 47.170289] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
468[ 47.492326] ata2: SATA link down (SStatus 0 SControl 300)
469[ 47.494946] ata3: SATA link down (SStatus 0 SControl 300)
470[ 47.497553] ata1: SATA link down (SStatus 0 SControl 300)
471[ 47.499111] ata6: SATA link down (SStatus 0 SControl 300)
472[ 47.500696] ata5: SATA link down (SStatus 0 SControl 300)
473[ 47.502291] ata4: SATA link down (SStatus 0 SControl 300)
474[ 47.968590] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
475[ 47.972317] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
476[ 47.975777] iTCO_wdt: timeout value out of range, using 30
477[ 47.978619] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
478[ 48.069951] kvm: Nested Virtualization enabled
479[ 55.393012] Key type dns_resolver registered
480[ 56.156019] NFS: Registering the id_resolver key type
481[ 56.158503] Key type id_resolver registered
482[ 56.160563] Key type id_legacy registered
483[ 59.689285] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
484[ 59.721347] systemd-journald[112]: Received request to flush runtime journal from PID 1
485[ 95.537313] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
486[ 110.112093] nfs: server 10.100.1.1 not responding, still trying
487[ 110.567343] nfs: server 10.100.1.1 OK
488[ 287.792169] nfs: server 10.100.1.1 not responding, still trying
489[ 287.794763] nfs: server 10.100.1.1 not responding, still trying
490[ 287.797783] nfs: server 10.100.1.1 not responding, still trying
491[ 287.799940] nfs: server 10.100.1.1 not responding, still trying
492[ 287.802559] nfs: server 10.100.1.1 not responding, still trying
493[ 287.804805] nfs: server 10.100.1.1 not responding, still trying
494[ 287.807174] nfs: server 10.100.1.1 not responding, still trying
495[ 287.808615] nfs: server 10.100.1.1 not responding, still trying
496[ 287.809969] nfs: server 10.100.1.1 not responding, still trying
497[ 287.811187] nfs: server 10.100.1.1 not responding, still trying
498[ 287.861802] nfs: server 10.100.1.1 OK
499[ 287.929275] nfs: server 10.100.1.1 OK
500[ 287.998115] nfs: server 10.100.1.1 OK
501[ 288.067670] nfs: server 10.100.1.1 OK
502[ 288.129595] nfs: server 10.100.1.1 OK
503[ 288.202869] nfs: server 10.100.1.1 OK
504[ 288.260611] nfs: server 10.100.1.1 OK
505[ 288.324337] nfs: server 10.100.1.1 OK
506[ 288.386762] nfs: server 10.100.1.1 OK
507[ 288.431165] nfs: server 10.100.1.1 OK
508[ 290.564068] nfs: server 10.100.1.1 not responding, still trying
509[ 290.567388] nfs: server 10.100.1.1 not responding, still trying
510[ 290.571361] nfs: server 10.100.1.1 not responding, still trying
511[ 290.574024] nfs: server 10.100.1.1 not responding, still trying
512[ 290.576688] nfs: server 10.100.1.1 not responding, still trying
513[ 290.820365] nfs: server 10.100.1.1 OK
514[ 290.879046] nfs: server 10.100.1.1 OK
515[ 290.929571] nfs: server 10.100.1.1 OK
516[ 290.987517] nfs: server 10.100.1.1 OK
517[ 290.999065] nfs: server 10.100.1.1 OK