persmule | f818d0a | 2017-10-10 02:16:39 +0800 | [diff] [blame] | 1 | [ 0.000000] Linux version 4.12.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170915 (Debian 6.4.0-6) ) #1 SMP Debian 4.12.13-1 (2017-09-19) |
| 2 | [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.12.0-2-amd64 root=UUID=77460594-bbda-42b7-a1d9-13c1e52e356e ro i8042.nomux=1 i8042.reset quiet iomem=relaxed |
| 3 | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| 4 | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| 5 | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| 6 | [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| 7 | [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| 8 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 9 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| 10 | [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| 11 | [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved |
| 12 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff00fff] usable |
| 13 | [ 0.000000] BIOS-e820: [mem 0x000000007ff01000-0x000000007fffffff] type 16 |
| 14 | [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000829fffff] reserved |
| 15 | [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| 16 | [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| 17 | [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| 18 | [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027d5fffff] usable |
| 19 | [ 0.000000] NX (Execute Disable) protection: active |
| 20 | [ 0.000000] SMBIOS 2.7 present. |
| 21 | [ 0.000000] DMI: LENOVO 33476LU/33476LU, BIOS CBET4000 4.6-1718-g22579596ff 10/09/2017 |
| 22 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 23 | [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 24 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 25 | [ 0.000000] e820: last_pfn = 0x27d600 max_arch_pfn = 0x400000000 |
| 26 | [ 0.000000] MTRR default type: write-back |
| 27 | [ 0.000000] MTRR fixed ranges enabled: |
| 28 | [ 0.000000] 00000-9FFFF write-back |
| 29 | [ 0.000000] A0000-BFFFF uncachable |
| 30 | [ 0.000000] C0000-FFFFF write-back |
| 31 | [ 0.000000] MTRR variable ranges enabled: |
| 32 | [ 0.000000] 0 base 080000000 mask FC0000000 uncachable |
| 33 | [ 0.000000] 1 base 0C0000000 mask FF0000000 uncachable |
| 34 | [ 0.000000] 2 base 0D0000000 mask FF0000000 write-combining |
| 35 | [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable |
| 36 | [ 0.000000] 4 disabled |
| 37 | [ 0.000000] 5 disabled |
| 38 | [ 0.000000] 6 disabled |
| 39 | [ 0.000000] 7 disabled |
| 40 | [ 0.000000] 8 disabled |
| 41 | [ 0.000000] 9 disabled |
| 42 | [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT |
| 43 | [ 0.000000] e820: last_pfn = 0x7ff01 max_arch_pfn = 0x400000000 |
| 44 | [ 0.000000] Base memory trampoline at [ffff8b8f80099000] 99000 size 24576 |
| 45 | [ 0.000000] BRK [0x27ad54000, 0x27ad54fff] PGTABLE |
| 46 | [ 0.000000] BRK [0x27ad55000, 0x27ad55fff] PGTABLE |
| 47 | [ 0.000000] BRK [0x27ad56000, 0x27ad56fff] PGTABLE |
| 48 | [ 0.000000] BRK [0x27ad57000, 0x27ad57fff] PGTABLE |
| 49 | [ 0.000000] BRK [0x27ad58000, 0x27ad58fff] PGTABLE |
| 50 | [ 0.000000] BRK [0x27ad59000, 0x27ad59fff] PGTABLE |
| 51 | [ 0.000000] BRK [0x27ad5a000, 0x27ad5afff] PGTABLE |
| 52 | [ 0.000000] BRK [0x27ad5b000, 0x27ad5bfff] PGTABLE |
| 53 | [ 0.000000] BRK [0x27ad5c000, 0x27ad5cfff] PGTABLE |
| 54 | [ 0.000000] BRK [0x27ad5d000, 0x27ad5dfff] PGTABLE |
| 55 | [ 0.000000] BRK [0x27ad5e000, 0x27ad5efff] PGTABLE |
| 56 | [ 0.000000] BRK [0x27ad5f000, 0x27ad5ffff] PGTABLE |
| 57 | [ 0.000000] RAMDISK: [mem 0x35be1000-0x36de7fff] |
| 58 | [ 0.000000] ACPI: Early table checksum verification disabled |
| 59 | [ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE ) |
| 60 | [ 0.000000] ACPI: XSDT 0x000000007FF130E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 61 | [ 0.000000] ACPI: FACP 0x000000007FF16540 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| 62 | [ 0.000000] ACPI: DSDT 0x000000007FF13280 0032B1 (v03 COREv4 COREBOOT 20141018 INTL 20161222) |
| 63 | [ 0.000000] ACPI: FACS 0x000000007FF13240 000040 |
| 64 | [ 0.000000] ACPI: FACS 0x000000007FF13240 000040 |
| 65 | [ 0.000000] ACPI: SSDT 0x000000007FF16640 001896 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 66 | [ 0.000000] ACPI: MCFG 0x000000007FF17EE0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 67 | [ 0.000000] ACPI: TCPA 0x000000007FF17F20 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| 68 | [ 0.000000] ACPI: APIC 0x000000007FF17F60 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 69 | [ 0.000000] ACPI: DMAR 0x000000007FF17FD0 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 70 | [ 0.000000] ACPI: HPET 0x000000007FF1A080 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 71 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 72 | [ 0.000000] No NUMA configuration found |
| 73 | [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027d5fffff] |
| 74 | [ 0.000000] NODE_DATA(0) allocated [mem 0x27d5fb000-0x27d5fffff] |
| 75 | [ 0.000000] Zone ranges: |
| 76 | [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| 77 | [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| 78 | [ 0.000000] Normal [mem 0x0000000100000000-0x000000027d5fffff] |
| 79 | [ 0.000000] Device empty |
| 80 | [ 0.000000] Movable zone start for each node |
| 81 | [ 0.000000] Early memory node ranges |
| 82 | [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| 83 | [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ff00fff] |
| 84 | [ 0.000000] node 0: [mem 0x0000000100000000-0x000000027d5fffff] |
| 85 | [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027d5fffff] |
| 86 | [ 0.000000] On node 0 totalpages: 2086048 |
| 87 | [ 0.000000] DMA zone: 64 pages used for memmap |
| 88 | [ 0.000000] DMA zone: 22 pages reserved |
| 89 | [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 |
| 90 | [ 0.000000] DMA32 zone: 8125 pages used for memmap |
| 91 | [ 0.000000] DMA32 zone: 519937 pages, LIFO batch:31 |
| 92 | [ 0.000000] Normal zone: 24408 pages used for memmap |
| 93 | [ 0.000000] Normal zone: 1562112 pages, LIFO batch:31 |
| 94 | [ 0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x00000000829fffff |
| 95 | [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| 96 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 97 | [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| 98 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 99 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| 100 | [ 0.000000] ACPI: IRQ0 used by override. |
| 101 | [ 0.000000] ACPI: IRQ9 used by override. |
| 102 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 103 | [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| 104 | [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| 105 | [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| 106 | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] |
| 107 | [ 0.000000] PM: Registered nosave memory: [mem 0x7ff01000-0x7fffffff] |
| 108 | [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0x829fffff] |
| 109 | [ 0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] |
| 110 | [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| 111 | [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| 112 | [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| 113 | [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| 114 | [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| 115 | [ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| 116 | [ 0.000000] e820: [mem 0x82a00000-0xefffffff] available for PCI devices |
| 117 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 118 | [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| 119 | [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| 120 | [ 0.000000] percpu: Embedded 38 pages/cpu @ffff8b91fd200000 s114840 r8192 d32616 u524288 |
| 121 | [ 0.000000] pcpu-alloc: s114840 r8192 d32616 u524288 alloc=1*2097152 |
| 122 | [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| 123 | [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2053429 |
| 124 | [ 0.000000] Policy zone: Normal |
| 125 | [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.12.0-2-amd64 root=UUID=77460594-bbda-42b7-a1d9-13c1e52e356e ro i8042.nomux=1 i8042.reset quiet iomem=relaxed |
| 126 | [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| 127 | [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| 128 | [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| 129 | [ 0.000000] Memory: 8112192K/8344192K available (6485K kernel code, 1145K rwdata, 2908K rodata, 1468K init, 704K bss, 232000K reserved, 0K cma-reserved) |
| 130 | [ 0.000000] ftrace: allocating 28157 entries in 110 pages |
| 131 | [ 0.000000] Hierarchical RCU implementation. |
| 132 | [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| 133 | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| 134 | [ 0.000000] NR_IRQS:33024 nr_irqs:456 16 |
| 135 | [ 0.000000] Console: colour dummy device 80x25 |
| 136 | [ 0.000000] console [tty0] enabled |
| 137 | [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| 138 | [ 0.000000] hpet clockevent registered |
| 139 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 140 | [ 0.004000] tsc: Detected 1995.509 MHz processor |
| 141 | [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.01 BogoMIPS (lpj=7982036) |
| 142 | [ 0.004000] pid_max: default: 32768 minimum: 301 |
| 143 | [ 0.004000] ACPI: Core revision 20170303 |
| 144 | [ 0.010389] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| 145 | [ 0.010440] Security Framework initialized |
| 146 | [ 0.010441] Yama: disabled by default; enable with sysctl kernel.yama.* |
| 147 | [ 0.010447] AppArmor: AppArmor disabled by boot time parameter |
| 148 | [ 0.010891] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| 149 | [ 0.013301] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| 150 | [ 0.014398] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| 151 | [ 0.014406] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| 152 | [ 0.014692] CPU: Physical Processor ID: 0 |
| 153 | [ 0.014693] CPU: Processor Core ID: 0 |
| 154 | [ 0.014701] mce: CPU supports 7 MCE banks |
| 155 | [ 0.014710] CPU0: Thermal monitoring enabled (TM1) |
| 156 | [ 0.014721] process: using mwait in idle threads |
| 157 | [ 0.014724] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| 158 | [ 0.014725] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| 159 | [ 0.014855] Freeing SMP alternatives memory: 24K |
| 160 | [ 0.016074] smpboot: Max logical packages: 2 |
| 161 | [ 0.016085] DMAR: Host address width 36 |
| 162 | [ 0.016087] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| 163 | [ 0.016093] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| 164 | [ 0.016094] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| 165 | [ 0.016098] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| 166 | [ 0.016100] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| 167 | [ 0.016101] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| 168 | [ 0.016102] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| 169 | [ 0.016512] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| 170 | [ 0.016513] x2apic enabled |
| 171 | [ 0.016519] Switched APIC routing to cluster x2apic. |
| 172 | [ 0.016981] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| 173 | [ 0.057514] TSC deadline timer enabled |
| 174 | [ 0.057517] smpboot: CPU0: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| 175 | [ 0.057597] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| 176 | [ 0.057622] ... version: 3 |
| 177 | [ 0.057622] ... bit width: 48 |
| 178 | [ 0.057623] ... generic registers: 4 |
| 179 | [ 0.057624] ... value mask: 0000ffffffffffff |
| 180 | [ 0.057624] ... max period: 00007fffffffffff |
| 181 | [ 0.057625] ... fixed-purpose events: 3 |
| 182 | [ 0.057625] ... event mask: 000000070000000f |
| 183 | [ 0.058209] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| 184 | [ 0.058228] smp: Bringing up secondary CPUs ... |
| 185 | [ 0.058332] x86: Booting SMP configuration: |
| 186 | [ 0.058333] .... node #0, CPUs: #1 #2 #3 |
| 187 | [ 0.298023] smp: Brought up 1 node, 4 CPUs |
| 188 | [ 0.298023] smpboot: Total of 4 processors activated (15967.84 BogoMIPS) |
| 189 | [ 0.300137] sched_clock: Marking stable (300000000, 0)->(296104665, 3895335) |
| 190 | [ 0.300454] devtmpfs: initialized |
| 191 | [ 0.300513] x86/mm: Memory block size: 128MB |
| 192 | [ 0.303516] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| 193 | [ 0.303525] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| 194 | [ 0.303580] pinctrl core: initialized pinctrl subsystem |
| 195 | [ 0.303699] NET: Registered protocol family 16 |
| 196 | [ 0.303914] cpuidle: using governor ladder |
| 197 | [ 0.303953] cpuidle: using governor menu |
| 198 | [ 0.303955] PCCT header not found. |
| 199 | [ 0.303991] ACPI: bus type PCI registered |
| 200 | [ 0.303993] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 201 | [ 0.304062] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| 202 | [ 0.304065] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| 203 | [ 0.304073] PCI: Using configuration type 1 for base access |
| 204 | [ 0.304123] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| 205 | [ 0.305139] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 206 | [ 0.305369] ACPI: Added _OSI(Module Device) |
| 207 | [ 0.305370] ACPI: Added _OSI(Processor Device) |
| 208 | [ 0.305371] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 209 | [ 0.305372] ACPI: Added _OSI(Processor Aggregator Device) |
| 210 | [ 0.305512] ACPI: Executed 1 blocks of module-level executable AML code |
| 211 | [ 0.307912] ACPI : EC: EC started |
| 212 | [ 0.307913] ACPI : EC: interrupt blocked |
| 213 | [ 0.307959] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC |
| 214 | [ 0.307961] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| 215 | [ 0.307962] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions |
| 216 | [ 0.307963] ACPI: Interpreter enabled |
| 217 | [ 0.307982] ACPI: (supports S0 S3 S4 S5) |
| 218 | [ 0.307983] ACPI: Using IOAPIC for interrupt routing |
| 219 | [ 0.308004] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 220 | [ 0.311881] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| 221 | [ 0.311886] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| 222 | [ 0.311944] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| 223 | [ 0.311955] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| 224 | [ 0.312182] PCI host bridge to bus 0000:00 |
| 225 | [ 0.312185] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| 226 | [ 0.312186] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| 227 | [ 0.312188] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| 228 | [ 0.312189] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| 229 | [ 0.312190] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| 230 | [ 0.312192] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| 231 | [ 0.312193] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| 232 | [ 0.312194] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| 233 | [ 0.312195] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| 234 | [ 0.312197] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| 235 | [ 0.312198] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| 236 | [ 0.312199] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| 237 | [ 0.312201] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| 238 | [ 0.312202] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| 239 | [ 0.312203] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| 240 | [ 0.312204] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| 241 | [ 0.312206] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window] |
| 242 | [ 0.312207] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| 243 | [ 0.312209] pci_bus 0000:00: root bus resource [bus 00-ff] |
| 244 | [ 0.312217] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| 245 | [ 0.312316] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| 246 | [ 0.312327] pci 0000:00:02.0: reg 0x10: [mem 0xe2800000-0xe2bfffff 64bit] |
| 247 | [ 0.312334] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| 248 | [ 0.312339] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] |
| 249 | [ 0.312425] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| 250 | [ 0.312435] pci 0000:00:04.0: reg 0x10: [mem 0xe2d10000-0xe2d17fff 64bit] |
| 251 | [ 0.312540] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| 252 | [ 0.312562] pci 0000:00:14.0: reg 0x10: [mem 0xe2d00000-0xe2d0ffff 64bit] |
| 253 | [ 0.312637] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| 254 | [ 0.312678] pci 0000:00:14.0: System wakeup disabled by ACPI |
| 255 | [ 0.312723] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| 256 | [ 0.312742] pci 0000:00:1a.0: reg 0x10: [mem 0xe2d1d000-0xe2d1d3ff] |
| 257 | [ 0.312832] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| 258 | [ 0.312873] pci 0000:00:1a.0: System wakeup disabled by ACPI |
| 259 | [ 0.312914] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| 260 | [ 0.312935] pci 0000:00:1b.0: reg 0x10: [mem 0xe2d18000-0xe2d1bfff 64bit] |
| 261 | [ 0.313016] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| 262 | [ 0.313061] pci 0000:00:1b.0: System wakeup disabled by ACPI |
| 263 | [ 0.313099] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 |
| 264 | [ 0.313183] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| 265 | [ 0.313262] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 |
| 266 | [ 0.313344] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| 267 | [ 0.313424] pci 0000:00:1c.2: [8086:1e16] type 01 class 0x060400 |
| 268 | [ 0.313506] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| 269 | [ 0.313594] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| 270 | [ 0.313614] pci 0000:00:1d.0: reg 0x10: [mem 0xe2d1e000-0xe2d1e3ff] |
| 271 | [ 0.313703] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| 272 | [ 0.313744] pci 0000:00:1d.0: System wakeup disabled by ACPI |
| 273 | [ 0.313785] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100 |
| 274 | [ 0.313961] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| 275 | [ 0.313979] pci 0000:00:1f.2: reg 0x10: [io 0x4060-0x4067] |
| 276 | [ 0.313988] pci 0000:00:1f.2: reg 0x14: [io 0x4070-0x4073] |
| 277 | [ 0.313997] pci 0000:00:1f.2: reg 0x18: [io 0x4068-0x406f] |
| 278 | [ 0.314006] pci 0000:00:1f.2: reg 0x1c: [io 0x4074-0x4077] |
| 279 | [ 0.314015] pci 0000:00:1f.2: reg 0x20: [io 0x4040-0x405f] |
| 280 | [ 0.314024] pci 0000:00:1f.2: reg 0x24: [mem 0xe2d1c000-0xe2d1c7ff] |
| 281 | [ 0.314073] pci 0000:00:1f.2: PME# supported from D3hot |
| 282 | [ 0.314142] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| 283 | [ 0.314159] pci 0000:00:1f.3: reg 0x10: [mem 0xe2d1f000-0xe2d1f0ff 64bit] |
| 284 | [ 0.314182] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| 285 | [ 0.314394] pci 0000:01:00.0: [10ec:5229] type 00 class 0xff0000 |
| 286 | [ 0.314487] pci 0000:01:00.0: reg 0x10: [mem 0xe2c00000-0xe2c00fff] |
| 287 | [ 0.315008] pci 0000:01:00.0: supports D1 D2 |
| 288 | [ 0.315009] pci 0000:01:00.0: PME# supported from D1 D2 D3hot |
| 289 | [ 0.328128] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| 290 | [ 0.328135] pci 0000:00:1c.0: bridge window [mem 0xe2c00000-0xe2cfffff] |
| 291 | [ 0.328241] pci 0000:02:00.0: [168c:0034] type 00 class 0x028000 |
| 292 | [ 0.328290] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe087ffff 64bit] |
| 293 | [ 0.328378] pci 0000:02:00.0: reg 0x30: [mem 0xe0880000-0xe088ffff pref] |
| 294 | [ 0.328502] pci 0000:02:00.0: supports D1 |
| 295 | [ 0.328503] pci 0000:02:00.0: PME# supported from D0 D1 D3hot |
| 296 | [ 0.344100] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| 297 | [ 0.344104] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] |
| 298 | [ 0.344108] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| 299 | [ 0.344115] pci 0000:00:1c.1: bridge window [mem 0xe1800000-0xe1ffffff 64bit pref] |
| 300 | [ 0.344201] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 |
| 301 | [ 0.344230] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff] |
| 302 | [ 0.344265] pci 0000:03:00.0: reg 0x18: [mem 0xe1404000-0xe1404fff 64bit pref] |
| 303 | [ 0.344287] pci 0000:03:00.0: reg 0x20: [mem 0xe1400000-0xe1403fff 64bit pref] |
| 304 | [ 0.344403] pci 0000:03:00.0: supports D1 D2 |
| 305 | [ 0.344404] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 306 | [ 0.356109] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| 307 | [ 0.356114] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff] |
| 308 | [ 0.356118] pci 0000:00:1c.2: bridge window [mem 0xe2000000-0xe27fffff] |
| 309 | [ 0.356124] pci 0000:00:1c.2: bridge window [mem 0xe0c00000-0xe14fffff 64bit pref] |
| 310 | [ 0.356251] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 311 | [ 0.356307] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 312 | [ 0.356360] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 313 | [ 0.356413] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 314 | [ 0.356464] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 315 | [ 0.356516] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 316 | [ 0.356567] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 317 | [ 0.356618] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 318 | [ 0.357048] ACPI: Enabled 3 GPEs in block 00 to 3F |
| 319 | [ 0.357127] ACPI : EC: interrupt unblocked |
| 320 | [ 0.357133] ACPI : EC: event unblocked |
| 321 | [ 0.357153] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| 322 | [ 0.357155] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events |
| 323 | [ 0.357237] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| 324 | [ 0.357239] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| 325 | [ 0.357243] pci 0000:00:02.0: vgaarb: bridge control possible |
| 326 | [ 0.357243] vgaarb: loaded |
| 327 | [ 0.357286] EDAC MC: Ver: 3.0.0 |
| 328 | [ 0.357453] PCI: Using ACPI for IRQ routing |
| 329 | [ 0.359168] PCI: pci_cache_line_size set to 64 bytes |
| 330 | [ 0.359255] e820: reserve RAM buffer [mem 0x7ff01000-0x7fffffff] |
| 331 | [ 0.359256] e820: reserve RAM buffer [mem 0x27d600000-0x27fffffff] |
| 332 | [ 0.359422] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| 333 | [ 0.359428] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| 334 | [ 0.362500] clocksource: Switched to clocksource hpet |
| 335 | [ 0.372319] VFS: Disk quotas dquot_6.6.0 |
| 336 | [ 0.372344] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 337 | [ 0.372425] pnp: PnP ACPI init |
| 338 | [ 0.372520] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| 339 | [ 0.372522] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| 340 | [ 0.372524] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| 341 | [ 0.372525] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| 342 | [ 0.372527] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| 343 | [ 0.372528] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| 344 | [ 0.372530] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| 345 | [ 0.372532] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| 346 | [ 0.372534] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| 347 | [ 0.372535] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| 348 | [ 0.372539] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 349 | [ 0.372829] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| 350 | [ 0.372832] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| 351 | [ 0.372876] system 00:02: [io 0x0500-0x057f] has been reserved |
| 352 | [ 0.372878] system 00:02: [io 0x0480-0x04bf] has been reserved |
| 353 | [ 0.372880] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 354 | [ 0.372903] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| 355 | [ 0.372938] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| 356 | [ 0.372965] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| 357 | [ 0.372995] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| 358 | [ 0.373014] pnp: PnP ACPI: found 7 devices |
| 359 | [ 0.379460] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| 360 | [ 0.379494] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| 361 | [ 0.379502] pci 0000:00:1c.0: bridge window [mem 0xe2c00000-0xe2cfffff] |
| 362 | [ 0.379512] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| 363 | [ 0.379515] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] |
| 364 | [ 0.379520] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| 365 | [ 0.379524] pci 0000:00:1c.1: bridge window [mem 0xe1800000-0xe1ffffff 64bit pref] |
| 366 | [ 0.379531] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| 367 | [ 0.379534] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff] |
| 368 | [ 0.379539] pci 0000:00:1c.2: bridge window [mem 0xe2000000-0xe27fffff] |
| 369 | [ 0.379543] pci 0000:00:1c.2: bridge window [mem 0xe0c00000-0xe14fffff 64bit pref] |
| 370 | [ 0.379551] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| 371 | [ 0.379553] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| 372 | [ 0.379554] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| 373 | [ 0.379555] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| 374 | [ 0.379557] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| 375 | [ 0.379558] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| 376 | [ 0.379559] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] |
| 377 | [ 0.379560] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] |
| 378 | [ 0.379562] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] |
| 379 | [ 0.379563] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] |
| 380 | [ 0.379564] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] |
| 381 | [ 0.379566] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] |
| 382 | [ 0.379567] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] |
| 383 | [ 0.379568] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] |
| 384 | [ 0.379569] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] |
| 385 | [ 0.379571] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] |
| 386 | [ 0.379572] pci_bus 0000:00: resource 20 [mem 0x82a00001-0xefffffff window] |
| 387 | [ 0.379573] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window] |
| 388 | [ 0.379575] pci_bus 0000:01: resource 1 [mem 0xe2c00000-0xe2cfffff] |
| 389 | [ 0.379576] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] |
| 390 | [ 0.379578] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff] |
| 391 | [ 0.379579] pci_bus 0000:02: resource 2 [mem 0xe1800000-0xe1ffffff 64bit pref] |
| 392 | [ 0.379580] pci_bus 0000:03: resource 0 [io 0x1000-0x2fff] |
| 393 | [ 0.379581] pci_bus 0000:03: resource 1 [mem 0xe2000000-0xe27fffff] |
| 394 | [ 0.379583] pci_bus 0000:03: resource 2 [mem 0xe0c00000-0xe14fffff 64bit pref] |
| 395 | [ 0.379666] NET: Registered protocol family 2 |
| 396 | [ 0.379842] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| 397 | [ 0.379993] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| 398 | [ 0.380217] TCP: Hash tables configured (established 65536 bind 65536) |
| 399 | [ 0.380254] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| 400 | [ 0.380287] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| 401 | [ 0.380358] NET: Registered protocol family 1 |
| 402 | [ 0.380371] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| 403 | [ 0.383409] PCI: CLS 64 bytes, default 64 |
| 404 | [ 0.383450] Unpacking initramfs... |
| 405 | [ 0.769898] Freeing initrd memory: 18460K |
| 406 | [ 0.769963] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| 407 | [ 0.769966] software IO TLB [mem 0x7bf01000-0x7ff01000] (64MB) mapped at [ffff8b8ffbf01000-ffff8b8ffff00fff] |
| 408 | [ 0.770371] audit: initializing netlink subsys (disabled) |
| 409 | [ 0.770440] audit: type=2000 audit(1507570424.767:1): state=initialized audit_enabled=0 res=1 |
| 410 | [ 0.770812] workingset: timestamp_bits=40 max_order=21 bucket_order=0 |
| 411 | [ 0.770860] zbud: loaded |
| 412 | [ 1.186223] Key type asymmetric registered |
| 413 | [ 1.186224] Asymmetric key parser 'x509' registered |
| 414 | [ 1.186238] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) |
| 415 | [ 1.186271] io scheduler noop registered |
| 416 | [ 1.186272] io scheduler deadline registered |
| 417 | [ 1.186284] io scheduler cfq registered (default) |
| 418 | [ 1.186285] io scheduler mq-deadline registered |
| 419 | [ 1.186991] pcieport 0000:00:1c.0: Signaling PME with IRQ 26 |
| 420 | [ 1.187013] pcieport 0000:00:1c.1: Signaling PME with IRQ 27 |
| 421 | [ 1.187032] pcieport 0000:00:1c.2: Signaling PME with IRQ 28 |
| 422 | [ 1.187055] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| 423 | [ 1.187095] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| 424 | [ 1.187136] efifb: probing for efifb |
| 425 | [ 1.187150] efifb: framebuffer at 0xd0000000, using 4160k, total 4160k |
| 426 | [ 1.187151] efifb: mode is 1376x768x32, linelength=5504, pages=1 |
| 427 | [ 1.187151] efifb: scrolling: redraw |
| 428 | [ 1.187152] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 |
| 429 | [ 1.189979] Console: switching to colour frame buffer device 172x48 |
| 430 | [ 1.192692] fb0: EFI VGA frame buffer device |
| 431 | [ 1.192700] intel_idle: MWAIT substates: 0x21120 |
| 432 | [ 1.192701] intel_idle: v0.4.1 model 0x3A |
| 433 | [ 1.192861] intel_idle: lapic_timer_reliable_states 0xffffffff |
| 434 | [ 1.193227] GHES: HEST is not enabled! |
| 435 | [ 1.193289] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 436 | [ 1.193723] Linux agpgart interface v0.103 |
| 437 | [ 1.206518] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| 438 | [ 1.286745] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| 439 | [ 1.286746] AMD IOMMUv2 functionality not available on this system |
| 440 | [ 1.287153] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| 441 | [ 1.298115] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 442 | [ 1.298121] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 443 | [ 1.298264] mousedev: PS/2 mouse device common for all mice |
| 444 | [ 1.298534] rtc_cmos 00:03: RTC can wake from S4 |
| 445 | [ 1.298664] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 |
| 446 | [ 1.298696] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| 447 | [ 1.298707] intel_pstate: Intel P-state driver initializing |
| 448 | [ 1.299064] ledtrig-cpu: registered to indicate activity on CPUs |
| 449 | [ 1.299497] NET: Registered protocol family 10 |
| 450 | [ 1.300029] Segment Routing with IPv6 |
| 451 | [ 1.300065] mip6: Mobile IPv6 |
| 452 | [ 1.300069] NET: Registered protocol family 17 |
| 453 | [ 1.300073] mpls_gso: MPLS GSO support |
| 454 | [ 1.300669] microcode: sig=0x306a9, pf=0x10, revision=0x1b |
| 455 | [ 1.300836] microcode: Microcode Update Driver: v2.2. |
| 456 | [ 1.301176] registered taskstats version 1 |
| 457 | [ 1.301212] zswap: loaded using pool lzo/zbud |
| 458 | [ 1.317492] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| 459 | [ 1.327498] atkbd serio0: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). |
| 460 | [ 1.327505] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known. |
| 461 | [ 1.459236] rtc_cmos 00:03: setting system clock to 2017-10-09 17:33:46 UTC (1507570426) |
| 462 | [ 1.459304] PM: Hibernation image not present or could not be loaded. |
| 463 | [ 1.463425] Freeing unused kernel memory: 1468K |
| 464 | [ 1.463428] Write protecting the kernel read-only data: 12288k |
| 465 | [ 1.464567] Freeing unused kernel memory: 1692K |
| 466 | [ 1.471100] Freeing unused kernel memory: 1188K |
| 467 | [ 1.472251] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| 468 | [ 1.534758] ACPI: bus type USB registered |
| 469 | [ 1.534781] usbcore: registered new interface driver usbfs |
| 470 | [ 1.534794] usbcore: registered new interface driver hub |
| 471 | [ 1.534817] usbcore: registered new device driver usb |
| 472 | [ 1.536065] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| 473 | [ 1.536073] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 |
| 474 | [ 1.536486] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| 475 | [ 1.536921] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 476 | [ 1.537115] ehci-pci: EHCI PCI platform driver |
| 477 | [ 1.537174] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930 |
| 478 | [ 1.537180] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| 479 | [ 1.537294] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 480 | [ 1.537296] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 481 | [ 1.537297] usb usb1: Product: xHCI Host Controller |
| 482 | [ 1.537298] usb usb1: Manufacturer: Linux 4.12.0-2-amd64 xhci-hcd |
| 483 | [ 1.537299] usb usb1: SerialNumber: 0000:00:14.0 |
| 484 | [ 1.537329] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffb23f40ca5000, 20:1a:06:5c:87:a3, XID 0c900800 IRQ 30 |
| 485 | [ 1.537332] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| 486 | [ 1.537439] hub 1-0:1.0: USB hub found |
| 487 | [ 1.537449] hub 1-0:1.0: 4 ports detected |
| 488 | [ 1.537585] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| 489 | [ 1.537588] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| 490 | [ 1.537616] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 |
| 491 | [ 1.537617] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 492 | [ 1.537618] usb usb2: Product: xHCI Host Controller |
| 493 | [ 1.537619] usb usb2: Manufacturer: Linux 4.12.0-2-amd64 xhci-hcd |
| 494 | [ 1.537619] usb usb2: SerialNumber: 0000:00:14.0 |
| 495 | [ 1.537701] hub 2-0:1.0: USB hub found |
| 496 | [ 1.537709] hub 2-0:1.0: 4 ports detected |
| 497 | [ 1.537947] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| 498 | [ 1.537953] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 |
| 499 | [ 1.537966] ehci-pci 0000:00:1a.0: debug port 2 |
| 500 | [ 1.539017] SCSI subsystem initialized |
| 501 | [ 1.540001] libata version 3.00 loaded. |
| 502 | [ 1.541868] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| 503 | [ 1.541891] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe2d1d000 |
| 504 | [ 1.544880] AVX version of gcm_enc/dec engaged. |
| 505 | [ 1.544881] AES CTR mode by8 optimization enabled |
| 506 | [ 1.558481] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| 507 | [ 1.558579] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 |
| 508 | [ 1.558581] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 509 | [ 1.558582] usb usb3: Product: EHCI Host Controller |
| 510 | [ 1.558583] usb usb3: Manufacturer: Linux 4.12.0-2-amd64 ehci_hcd |
| 511 | [ 1.558584] usb usb3: SerialNumber: 0000:00:1a.0 |
| 512 | [ 1.558729] hub 3-0:1.0: USB hub found |
| 513 | [ 1.558739] hub 3-0:1.0: 3 ports detected |
| 514 | [ 1.559027] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| 515 | [ 1.559034] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 |
| 516 | [ 1.559047] ehci-pci 0000:00:1d.0: debug port 2 |
| 517 | [ 1.562954] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| 518 | [ 1.562978] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe2d1e000 |
| 519 | [ 1.578517] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| 520 | [ 1.578602] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 |
| 521 | [ 1.578603] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 522 | [ 1.578604] usb usb4: Product: EHCI Host Controller |
| 523 | [ 1.578605] usb usb4: Manufacturer: Linux 4.12.0-2-amd64 ehci_hcd |
| 524 | [ 1.578605] usb usb4: SerialNumber: 0000:00:1d.0 |
| 525 | [ 1.579232] hub 4-0:1.0: USB hub found |
| 526 | [ 1.579241] hub 4-0:1.0: 3 ports detected |
| 527 | [ 1.579349] ahci 0000:00:1f.2: version 3.0 |
| 528 | [ 1.579601] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| 529 | [ 1.589741] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode |
| 530 | [ 1.589745] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| 531 | [ 1.590611] scsi host0: ahci |
| 532 | [ 1.590859] scsi host1: ahci |
| 533 | [ 1.591015] scsi host2: ahci |
| 534 | [ 1.591141] scsi host3: ahci |
| 535 | [ 1.591271] scsi host4: ahci |
| 536 | [ 1.591422] scsi host5: ahci |
| 537 | [ 1.591505] ata1: SATA max UDMA/133 abar m2048@0xe2d1c000 port 0xe2d1c100 irq 32 |
| 538 | [ 1.591506] ata2: DUMMY |
| 539 | [ 1.591510] ata3: SATA max UDMA/133 abar m2048@0xe2d1c000 port 0xe2d1c200 irq 32 |
| 540 | [ 1.591511] ata4: DUMMY |
| 541 | [ 1.591512] ata5: DUMMY |
| 542 | [ 1.591513] ata6: DUMMY |
| 543 | [ 1.591764] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| 544 | [ 1.790524] tsc: Refined TSC clocksource calibration: 1995.466 MHz |
| 545 | [ 1.790535] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3986e6ba568, max_idle_ns: 881590718426 ns |
| 546 | [ 1.888787] usb 3-1: new high-speed USB device number 2 using ehci-pci |
| 547 | [ 1.905880] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| 548 | [ 1.906507] usb 4-1: new high-speed USB device number 2 using ehci-pci |
| 549 | [ 1.906560] ata1.00: ATA-9: WDC WD5000LPVX-22V0TT0, 01.01A01, max UDMA/133 |
| 550 | [ 1.906565] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA |
| 551 | [ 1.907236] ata1.00: configured for UDMA/133 |
| 552 | [ 1.907609] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVX-2 1A01 PQ: 0 ANSI: 5 |
| 553 | [ 2.035004] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 |
| 554 | [ 2.035009] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 555 | [ 2.035602] hub 3-1:1.0: USB hub found |
| 556 | [ 2.035704] hub 3-1:1.0: 6 ports detected |
| 557 | [ 2.054871] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 |
| 558 | [ 2.054875] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 559 | [ 2.055486] hub 4-1:1.0: USB hub found |
| 560 | [ 2.055569] hub 4-1:1.0: 8 ports detected |
| 561 | [ 2.253361] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| 562 | [ 2.257076] ata3.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51702, max UDMA/133 |
| 563 | [ 2.257081] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA |
| 564 | [ 2.257630] ata3.00: configured for UDMA/133 |
| 565 | [ 2.258119] scsi 2:0:0:0: Direct-Access ATA LITEONIT LSS-32L 702 PQ: 0 ANSI: 5 |
| 566 | [ 2.281360] psmouse serio1: synaptics: queried max coordinates: x [..5744], y [..4790] |
| 567 | [ 2.294945] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) |
| 568 | [ 2.294949] sd 0:0:0:0: [sda] 4096-byte physical blocks |
| 569 | [ 2.294979] sd 0:0:0:0: [sda] Write Protect is off |
| 570 | [ 2.294983] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| 571 | [ 2.295065] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 572 | [ 2.295103] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) |
| 573 | [ 2.295128] sd 2:0:0:0: [sdb] Write Protect is off |
| 574 | [ 2.295131] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| 575 | [ 2.295173] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 576 | [ 2.297254] sdb: sdb1 sdb2 sdb3 sdb5 sdb6 sdb7 |
| 577 | [ 2.297903] sd 2:0:0:0: [sdb] Attached SCSI disk |
| 578 | [ 2.322504] usb 3-1.1: new full-speed USB device number 3 using ehci-pci |
| 579 | [ 2.323086] random: fast init done |
| 580 | [ 2.341577] psmouse serio1: synaptics: queried min coordinates: x [1198..], y [1062..] |
| 581 | [ 2.341582] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience. |
| 582 | [ 2.346689] usb 4-1.5: new full-speed USB device number 3 using ehci-pci |
| 583 | [ 2.393754] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 |
| 584 | [ 2.395648] sd 0:0:0:0: [sda] Attached SCSI disk |
| 585 | [ 2.441070] usb 3-1.1: New USB device found, idVendor=03eb, idProduct=8206 |
| 586 | [ 2.441078] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 587 | [ 2.441083] usb 3-1.1: Product: Atmel maXTouch Digitizer |
| 588 | [ 2.441100] usb 3-1.1: Manufacturer: Atmel |
| 589 | [ 2.445208] hidraw: raw HID events driver (C) Jiri Kosina |
| 590 | [ 2.450224] usbcore: registered new interface driver usbhid |
| 591 | [ 2.450224] usbhid: USB HID core driver |
| 592 | [ 2.450857] hid-generic 0003:03EB:8206.0002: hiddev0,hidraw0: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.1/input1 |
| 593 | [ 2.451469] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x126c00/0x0, board id: 2253, fw id: 1192539 |
| 594 | [ 2.451473] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| 595 | [ 2.456785] usb 4-1.5: New USB device found, idVendor=0483, idProduct=91d1 |
| 596 | [ 2.456788] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 597 | [ 2.456790] usb 4-1.5: Product: STM32 eMotion2 |
| 598 | [ 2.456791] usb 4-1.5: Manufacturer: STMicroelectronics |
| 599 | [ 2.456793] usb 4-1.5: SerialNumber: STM32 eMotion2 |
| 600 | [ 2.522503] usb 3-1.3: new full-speed USB device number 4 using ehci-pci |
| 601 | [ 2.522602] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 |
| 602 | [ 2.542534] usb 4-1.6: new high-speed USB device number 4 using ehci-pci |
| 603 | [ 2.632431] usb 3-1.3: string descriptor 0 read error: -22 |
| 604 | [ 2.632460] usb 3-1.3: New USB device found, idVendor=0930, idProduct=021c |
| 605 | [ 2.632461] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 606 | [ 2.712900] usb 4-1.6: New USB device found, idVendor=5986, idProduct=0266 |
| 607 | [ 2.712901] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 608 | [ 2.712903] usb 4-1.6: Product: Integrated Camera |
| 609 | [ 2.712904] usb 4-1.6: Manufacturer: SunplusIT INC. |
| 610 | [ 2.815560] clocksource: Switched to clocksource tsc |
| 611 | [ 3.162565] PM: Starting manual resume from disk |
| 612 | [ 3.162570] PM: Hibernation image partition 8:2 present |
| 613 | [ 3.162572] PM: Looking for hibernation image. |
| 614 | [ 3.162773] PM: Image not found (code -22) |
| 615 | [ 3.162774] PM: Hibernation image not present or could not be loaded. |
| 616 | [ 3.269197] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null) |
| 617 | [ 3.385849] ip_tables: (C) 2000-2006 Netfilter Core Team |
| 618 | [ 3.390402] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) |
| 619 | [ 3.390556] systemd[1]: Detected architecture x86-64. |
| 620 | [ 3.392395] systemd[1]: Set hostname to <universi-lnvx60>. |
| 621 | [ 3.450292] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| 622 | [ 3.529787] systemd[1]: Created slice System Slice. |
| 623 | [ 3.529859] systemd[1]: Listening on Journal Socket (/dev/log). |
| 624 | [ 3.529988] systemd[1]: Created slice system-getty.slice. |
| 625 | [ 3.530090] systemd[1]: Created slice User and Session Slice. |
| 626 | [ 3.530133] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| 627 | [ 3.530690] systemd[1]: Mounting Huge Pages File System... |
| 628 | [ 3.530774] systemd[1]: Listening on Syslog Socket. |
| 629 | [ 3.546620] EXT4-fs (sdb5): re-mounted. Opts: discard,user_xattr,errors=remount-ro |
| 630 | [ 3.556100] RPC: Registered named UNIX socket transport module. |
| 631 | [ 3.556101] RPC: Registered udp transport module. |
| 632 | [ 3.556102] RPC: Registered tcp transport module. |
| 633 | [ 3.556102] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| 634 | [ 3.561863] lp: driver loaded but no devices found |
| 635 | [ 3.566982] ppdev: user-space parallel port driver |
| 636 | [ 3.572322] loop: module loaded |
| 637 | [ 3.716444] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/PNP0C09:00/PNP0C0D:00/input/input4 |
| 638 | [ 3.716463] ACPI: Lid Switch [LID] |
| 639 | [ 3.716516] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 |
| 640 | [ 3.716519] ACPI: Power Button [PWRF] |
| 641 | [ 3.721727] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| 642 | [ 3.771002] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170303/utaddress-247) |
| 643 | [ 3.771009] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 644 | [ 3.771017] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247) |
| 645 | [ 3.771021] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 646 | [ 3.771021] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247) |
| 647 | [ 3.771025] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 648 | [ 3.771026] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247) |
| 649 | [ 3.771029] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 650 | [ 3.771030] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| 651 | [ 3.775405] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:03EB:8206.0001/input/input6 |
| 652 | [ 3.775483] hid-multitouch 0003:03EB:8206.0001: input,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.1/input0 |
| 653 | [ 3.776769] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| 654 | [ 3.777192] media: Linux media interface: v0.10 |
| 655 | [ 3.779562] sd 2:0:0:0: Attached scsi generic sg1 type 0 |
| 656 | [ 3.781574] Linux video capture interface: v2.00 |
| 657 | [ 3.787870] Non-volatile memory driver v1.3 |
| 658 | [ 3.799149] [drm] Memory usable by graphics device = 2048M |
| 659 | [ 3.799152] checking generic (d0000000 410000) vs hw (d0000000 10000000) |
| 660 | [ 3.799153] fb: switching to inteldrmfb from EFI VGA |
| 661 | [ 3.799196] Console: switching to colour dummy device 80x25 |
| 662 | [ 3.799287] [drm] Replacing VGA console driver |
| 663 | [ 3.800055] Bluetooth: Core ver 2.22 |
| 664 | [ 3.800066] NET: Registered protocol family 31 |
| 665 | [ 3.800067] Bluetooth: HCI device and connection manager initialized |
| 666 | [ 3.800069] Bluetooth: HCI socket layer initialized |
| 667 | [ 3.800071] Bluetooth: L2CAP socket layer initialized |
| 668 | [ 3.800077] Bluetooth: SCO socket layer initialized |
| 669 | [ 3.805437] thinkpad_acpi: ThinkPad ACPI Extras v0.25 |
| 670 | [ 3.805438] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| 671 | [ 3.805438] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-1718-g22579596ff, EC GDHTB3WW |
| 672 | [ 3.805439] thinkpad_acpi: Lenovo ThinkPad Twist, model 33476LU |
| 673 | [ 3.805591] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| 674 | [ 3.805759] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| 675 | [ 3.805760] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| 676 | [ 3.811631] usbcore: registered new interface driver btusb |
| 677 | [ 3.814552] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0266) |
| 678 | [ 3.815684] usb 3-1.3: firmware: direct-loading firmware ar3k/AthrBT_0x11020000.dfu |
| 679 | [ 3.819980] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3 |
| 680 | [ 3.822925] uvcvideo 4-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| 681 | [ 3.822928] uvcvideo 4-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| 682 | [ 3.822930] uvcvideo 4-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| 683 | [ 3.822931] uvcvideo 4-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| 684 | [ 3.823004] input: Integrated Camera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input8 |
| 685 | [ 3.823036] usbcore: registered new interface driver uvcvideo |
| 686 | [ 3.823037] USB Video Class driver (1.1.1) |
| 687 | [ 3.826816] ath: phy0: ASPM enabled: 0x43 |
| 688 | [ 3.826818] ath: EEPROM regdomain: 0x6a |
| 689 | [ 3.826819] ath: EEPROM indicates we should expect a direct regpair map |
| 690 | [ 3.826820] ath: Country alpha2 being used: 00 |
| 691 | [ 3.826821] ath: Regpair used: 0x6a |
| 692 | [ 3.829525] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| 693 | [ 3.829875] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffb23f41480000, irq=17 |
| 694 | [ 3.852808] usb 3-1.3: firmware: direct-loading firmware ar3k/ramps_0x11020000_40.dfu |
| 695 | [ 3.856283] usbcore: registered new interface driver ath3k |
| 696 | [ 3.858483] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| 697 | [ 3.858484] [drm] Driver supports precise vblank timestamp query. |
| 698 | [ 3.858931] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| 699 | [ 3.902763] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0 |
| 700 | [ 3.902939] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| 701 | [ 3.904200] acpi device:03: registered as cooling_device4 |
| 702 | [ 3.904265] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9 |
| 703 | [ 3.925229] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| 704 | [ 3.925233] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| 705 | [ 3.925235] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| 706 | [ 3.925236] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| 707 | [ 3.925237] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| 708 | [ 3.925239] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| 709 | [ 3.925241] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| 710 | [ 3.925242] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| 711 | [ 3.963432] input: PC Speaker as /devices/platform/pcspkr/input/input11 |
| 712 | [ 3.990480] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| 713 | [ 3.990482] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| 714 | [ 3.990483] RAPL PMU: hw unit of domain package 2^-16 Joules |
| 715 | [ 3.990483] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| 716 | [ 3.998585] ACPI: Battery Slot [BAT0] (battery present) |
| 717 | [ 3.998632] ACPI: Battery Slot [BAT1] (battery absent) |
| 718 | [ 3.998689] ACPI: AC Adapter [AC] (on-line) |
| 719 | [ 4.000425] thinkpad_acpi: ThinkPad ACPI EC access misbehaving, disabling thermal sensors access |
| 720 | [ 4.000432] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| 721 | [ 4.000603] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| 722 | [ 4.001508] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 |
| 723 | [ 4.051569] intel_rapl: Found RAPL domain package |
| 724 | [ 4.051571] intel_rapl: Found RAPL domain core |
| 725 | [ 4.051573] intel_rapl: Found RAPL domain uncore |
| 726 | [ 4.102937] iTCO_vendor_support: vendor-support=0 |
| 727 | [ 4.103453] usb 3-1.3: USB disconnect, device number 4 |
| 728 | [ 4.103799] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| 729 | [ 4.103905] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| 730 | [ 4.104135] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| 731 | [ 4.108669] random: crng init done |
| 732 | [ 4.195203] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| 733 | [ 4.195225] fbcon: inteldrmfb (fb0) is primary device |
| 734 | [ 4.197647] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| 735 | [ 4.198388] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| 736 | [ 4.198464] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| 737 | [ 4.198524] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| 738 | [ 4.198582] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| 739 | [ 4.198638] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| 740 | [ 4.198693] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| 741 | [ 4.326414] usb 3-1.3: new full-speed USB device number 5 using ehci-pci |
| 742 | [ 4.436107] usb 3-1.3: string descriptor 0 read error: -22 |
| 743 | [ 4.436114] usb 3-1.3: New USB device found, idVendor=0930, idProduct=021c |
| 744 | [ 4.436117] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 745 | [ 4.942841] Adding 14871548k swap on /dev/sda2. Priority:-1 extents:1 across:14871548k FS |
| 746 | [ 4.965142] Console: switching to colour frame buffer device 172x48 |
| 747 | [ 4.988842] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| 748 | [ 5.085787] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem |
| 749 | [ 5.088025] EXT4-fs (sdb3): mounted filesystem without journal. Opts: user_xattr |
| 750 | [ 5.106596] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: discard,user_xattr |
| 751 | [ 5.107381] FAT-fs (sdb2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| 752 | [ 5.855861] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: user_xattr |
| 753 | [ 5.926240] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: discard,user_xattr |
| 754 | [ 5.931389] systemd-journald[261]: Received request to flush runtime journal from PID 1 |
| 755 | [ 6.336994] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: user_xattr |
| 756 | [ 6.713232] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr |
| 757 | [ 6.868363] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr |
| 758 | [ 7.256316] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: user_xattr |
| 759 | [ 7.872416] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| 760 | [ 7.872418] Bluetooth: BNEP filters: protocol multicast |
| 761 | [ 7.872422] Bluetooth: BNEP socket layer initialized |
| 762 | [ 9.831439] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 763 | [ 9.831624] r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2) |
| 764 | [ 9.831671] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168e-3.fw failed with error -2 |
| 765 | [ 9.831674] r8169 0000:03:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2) |
| 766 | [ 9.848495] r8169 0000:03:00.0 eth0: link down |
| 767 | [ 9.848567] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 768 | [ 9.855586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 769 | [ 9.867327] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 770 | [ 9.881282] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 771 | [ 10.084281] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 772 | [ 13.758565] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 773 | [ 13.811351] wlan0: authenticate with f8:1a:67:5a:c4:74 |
| 774 | [ 13.821829] wlan0: send auth to f8:1a:67:5a:c4:74 (try 1/3) |
| 775 | [ 13.827009] wlan0: authenticated |
| 776 | [ 13.830100] wlan0: associate with f8:1a:67:5a:c4:74 (try 1/3) |
| 777 | [ 13.833955] wlan0: RX AssocResp from f8:1a:67:5a:c4:74 (capab=0x431 status=0 aid=2) |
| 778 | [ 13.834116] wlan0: associated |
| 779 | [ 13.834125] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| 780 | [ 13.840042] ath: EEPROM regdomain: 0x809c |
| 781 | [ 13.840043] ath: EEPROM indicates we should expect a country code |
| 782 | [ 13.840044] ath: doing EEPROM country->regdmn map search |
| 783 | [ 13.840045] ath: country maps to regdmn code: 0x52 |
| 784 | [ 13.840046] ath: Country alpha2 being used: CN |
| 785 | [ 13.840046] ath: Regpair used: 0x52 |
| 786 | [ 13.840047] ath: regdomain 0x809c dynamically updated by country IE |
| 787 | [ 17.701768] Bluetooth: RFCOMM TTY layer initialized |
| 788 | [ 17.701773] Bluetooth: RFCOMM socket layer initialized |
| 789 | [ 17.701778] Bluetooth: RFCOMM ver 1.11 |
| 790 | [ 205.419521] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). |
| 791 | [ 205.419528] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| 792 | [ 205.422809] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). |
| 793 | [ 205.422816] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |