Rudolf Marek | c60b384 | 2014-01-04 00:01:36 +0100 | [diff] [blame] | 1 | [ 0.000000] Initializing cgroup subsys cpuset |
| 2 | [ 0.000000] Initializing cgroup subsys cpu |
| 3 | [ 0.000000] Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5) |
| 4 | [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro console=ttyS0,115200 |
| 5 | [ 0.000000] KERNEL supported cpus: |
| 6 | [ 0.000000] Intel GenuineIntel |
| 7 | [ 0.000000] AMD AuthenticAMD |
| 8 | [ 0.000000] Centaur CentaurHauls |
| 9 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 10 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| 11 | [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| 12 | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| 13 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffdffff] usable |
| 14 | [ 0.000000] BIOS-e820: [mem 0x000000001ffe0000-0x000000001fffffff] reserved |
| 15 | [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved |
| 16 | [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved |
| 17 | [ 0.000000] BIOS-e820: [mem 0x00000000fecc0000-0x00000000fecc0fff] reserved |
| 18 | [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved |
| 19 | [ 0.000000] NX (Execute Disable) protection: active |
| 20 | [ 0.000000] DMI present. |
| 21 | [ 0.000000] DMI: ASUS A8V-E SE, BIOS 4.0-5192-g812d624 01/03/2014 |
| 22 | [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved |
| 23 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 24 | [ 0.000000] AGP bridge at 00:00:00 |
| 25 | [ 0.000000] Aperture from AGP @ c0000000 old size 32 MB |
| 26 | [ 0.000000] Aperture from AGP @ c0000000 size 256 MB (APSIZE f00) |
| 27 | [ 0.000000] e820: last_pfn = 0x1ffe0 max_arch_pfn = 0x400000000 |
| 28 | [ 0.000000] MTRR default type: uncachable |
| 29 | [ 0.000000] MTRR fixed ranges enabled: |
| 30 | [ 0.000000] 00000-9FFFF write-back |
| 31 | [ 0.000000] A0000-BFFFF uncachable |
| 32 | [ 0.000000] C0000-FFFFF write-back |
| 33 | [ 0.000000] MTRR variable ranges enabled: |
| 34 | [ 0.000000] 0 base 0000000000 mask FFE0000000 write-back |
| 35 | [ 0.000000] 1 disabled |
| 36 | [ 0.000000] 2 disabled |
| 37 | [ 0.000000] 3 disabled |
| 38 | [ 0.000000] 4 disabled |
| 39 | [ 0.000000] 5 disabled |
| 40 | [ 0.000000] 6 disabled |
| 41 | [ 0.000000] 7 disabled |
| 42 | [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| 43 | [ 0.000000] found SMP MP-table at [mem 0x000fd950-0x000fd95f] mapped at [ffff8800000fd950] |
| 44 | [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] |
| 45 | [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| 46 | [ 0.000000] init_memory_mapping: [mem 0x00000000-0x1ffdffff] |
| 47 | [ 0.000000] [mem 0x00000000-0x1fdfffff] page 2M |
| 48 | [ 0.000000] [mem 0x1fe00000-0x1ffdffff] page 4k |
| 49 | [ 0.000000] kernel direct mapping tables up to 0x1ffdffff @ [mem 0x1ffdd000-0x1ffdffff] |
| 50 | [ 0.000000] RAMDISK: [mem 0x1eaab000-0x1f931fff] |
| 51 | [ 0.000000] ACPI: RSDP 00000000000fd930 00014 (v00 CORE ) |
| 52 | [ 0.000000] ACPI: RSDT 000000001ffe1424 00038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 53 | [ 0.000000] ACPI: FACP 000000001ffe1ed5 000F4 (v04 CORE COREBOOT 00000000 CORE 0000002A) |
| 54 | [ 0.000000] ACPI: DSDT 000000001ffe1508 009CD (v01 CORE COREBOOT 00000001 INTL 20130626) |
| 55 | [ 0.000000] ACPI: FACS 000000001ffe14c8 00040 |
| 56 | [ 0.000000] ACPI: APIC 000000001ffe1fc9 00066 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 57 | [ 0.000000] ACPI: MCFG 000000001ffe202f 0003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 58 | [ 0.000000] ACPI: SRAT 000000001ffe206b 00090 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 59 | [ 0.000000] ACPI: SSDT 000000001ffe20fb 00273 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 60 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 61 | [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| 62 | [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| 63 | [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0x1fffffff] |
| 64 | [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x1ffdffff] -> [mem 0x00000000-0x1ffdffff] |
| 65 | [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ffdffff] |
| 66 | [ 0.000000] NODE_DATA [mem 0x1ffd9000-0x1ffdcfff] |
| 67 | [ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001de00000-ffff88001e5fffff] on node 0 |
| 68 | [ 0.000000] Zone ranges: |
| 69 | [ 0.000000] DMA [mem 0x00010000-0x00ffffff] |
| 70 | [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| 71 | [ 0.000000] Normal empty |
| 72 | [ 0.000000] Movable zone start for each node |
| 73 | [ 0.000000] Early memory node ranges |
| 74 | [ 0.000000] node 0: [mem 0x00010000-0x0009efff] |
| 75 | [ 0.000000] node 0: [mem 0x00100000-0x1ffdffff] |
| 76 | [ 0.000000] On node 0 totalpages: 130927 |
| 77 | [ 0.000000] DMA zone: 64 pages used for memmap |
| 78 | [ 0.000000] DMA zone: 6 pages reserved |
| 79 | [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 |
| 80 | [ 0.000000] DMA32 zone: 1984 pages used for memmap |
| 81 | [ 0.000000] DMA32 zone: 124960 pages, LIFO batch:31 |
| 82 | [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| 83 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 84 | [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| 85 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| 86 | [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| 87 | [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 |
| 88 | [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24]) |
| 89 | [ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47 |
| 90 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| 91 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 92 | [ 0.000000] ACPI: IRQ0 used by override. |
| 93 | [ 0.000000] ACPI: IRQ2 used by override. |
| 94 | [ 0.000000] ACPI: IRQ9 used by override. |
| 95 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 96 | [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs |
| 97 | [ 0.000000] nr_irqs_gsi: 64 |
| 98 | [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 |
| 99 | [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 |
| 100 | [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 |
| 101 | [ 0.000000] e820: [mem 0x20000000-0xdfffffff] available for PCI devices |
| 102 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 103 | [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1 |
| 104 | [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88001fc00000 s83584 r8192 d22912 u2097152 |
| 105 | [ 0.000000] pcpu-alloc: s83584 r8192 d22912 u2097152 alloc=1*2097152 |
| 106 | [ 0.000000] pcpu-alloc: [0] 0 |
| 107 | [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 128873 |
| 108 | [ 0.000000] Policy zone: DMA32 |
| 109 | [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro console=ttyS0,115200 |
| 110 | [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) |
| 111 | [ 0.000000] __ex_table already sorted, skipping sort |
| 112 | [ 0.000000] Checking aperture... |
| 113 | [ 0.000000] AGP bridge at 00:00:00 |
| 114 | [ 0.000000] Aperture from AGP @ c0000000 old size 32 MB |
| 115 | [ 0.000000] Aperture from AGP @ c0000000 size 256 MB (APSIZE f00) |
| 116 | [ 0.000000] Node 0: aperture @ f4000000 size 64 MB |
| 117 | [ 0.000000] Memory: 484708k/524160k available (6711k kernel code, 452k absent, 39000k reserved, 6459k data, 928k init) |
| 118 | [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 |
| 119 | [ 0.000000] Hierarchical RCU implementation. |
| 120 | [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| 121 | [ 0.000000] NR_IRQS:16640 nr_irqs:256 16 |
| 122 | [ 0.000000] Extended CMOS year: 5100 |
| 123 | [ 0.000000] WARNING: Persistent clock returned invalid value! |
| 124 | [ 0.000000] Check your CMOS/BIOS settings. |
| 125 | [ 0.000000] spurious 8259A interrupt: IRQ7. |
| 126 | [ 0.000000] Console: colour VGA+ 80x25 |
| 127 | [ 0.000000] console [ttyS0] enabled |
| 128 | [ 0.000000] allocated 2097152 bytes of page_cgroup |
| 129 | [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups |
| 130 | [ 0.000000] Fast TSC calibration using PIT |
| 131 | [ 0.000000] Detected 1000.021 MHz processor. |
| 132 | [ 0.012005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.04 BogoMIPS (lpj=4000084) |
| 133 | [ 0.018799] pid_max: default: 32768 minimum: 301 |
| 134 | [ 0.020058] Security Framework initialized |
| 135 | [ 0.024039] AppArmor: AppArmor initialized |
| 136 | [ 0.028006] Yama: becoming mindful. |
| 137 | [ 0.032207] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) |
| 138 | [ 0.040023] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| 139 | [ 0.044261] Mount-cache hash table entries: 256 |
| 140 | [ 0.052141] Initializing cgroup subsys cpuacct |
| 141 | [ 0.056010] Initializing cgroup subsys memory |
| 142 | [ 0.060025] Initializing cgroup subsys devices |
| 143 | [ 0.064010] Initializing cgroup subsys freezer |
| 144 | [ 0.068009] Initializing cgroup subsys blkio |
| 145 | [ 0.072009] Initializing cgroup subsys perf_event |
| 146 | [ 0.076057] tseg: 0000000000 |
| 147 | [ 0.076084] mce: CPU supports 5 MCE banks |
| 148 | [ 0.080073] SMP alternatives: switching to UP code |
| 149 | [ 0.103448] Freeing SMP alternatives: 24k freed |
| 150 | [ 0.108035] ACPI: Core revision 20120320 |
| 151 | [ 0.112726] ftrace: allocating 25118 entries in 99 pages |
| 152 | [ 0.137404] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| 153 | [ 0.181936] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00 |
| 154 | [ 0.188011] Performance Events: AMD PMU driver. |
| 155 | [ 0.188014] ... version: 0 |
| 156 | [ 0.192013] ... bit width: 48 |
| 157 | [ 0.196013] ... generic registers: 4 |
| 158 | [ 0.200014] ... value mask: 0000ffffffffffff |
| 159 | [ 0.204014] ... max period: 00007fffffffffff |
| 160 | [ 0.208014] ... fixed-purpose events: 0 |
| 161 | [ 0.212015] ... event mask: 000000000000000f |
| 162 | [ 0.216381] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| 163 | [ 0.220072] Brought up 1 CPUs |
| 164 | [ 0.224018] Total of 1 processors activated (2000.04 BogoMIPS). |
| 165 | [ 0.228933] devtmpfs: initialized |
| 166 | [ 0.237758] EVM: security.selinux |
| 167 | [ 0.240017] EVM: security.SMACK64 |
| 168 | [ 0.244017] EVM: security.capability |
| 169 | [ 0.249966] dummy: |
| 170 | [ 0.252084] RTC time: 23:01:24, date: 01/03/14 |
| 171 | [ 0.256095] NET: Registered protocol family 16 |
| 172 | [ 0.260275] node 0 link 0: io port [1000, 3fff] |
| 173 | [ 0.260282] TOM: 0000000020000000 aka 512M |
| 174 | [ 0.264022] node 0 link 0: mmio [a0000, bffff] |
| 175 | [ 0.264029] node 0 link 0: mmio [e0000000, f02fffff] |
| 176 | [ 0.264034] node 0 link 0: mmio [c0000000, d7ffffff] |
| 177 | [ 0.264039] bus: [00, 06] on node 0 link 0 |
| 178 | [ 0.264044] bus: 00 [io 0x0000-0xffff] |
| 179 | [ 0.264048] bus: 00 [mem 0x000a0000-0x000bffff] |
| 180 | [ 0.264052] bus: 00 [mem 0xd8000000-0xfcffffffff] |
| 181 | [ 0.264055] bus: 00 [mem 0x20000000-0xd7ffffff] |
| 182 | [ 0.264148] ACPI FADT declares the system doesn't support MSI, so disable it |
| 183 | [ 0.268019] ACPI: bus type pci registered |
| 184 | [ 0.272122] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) |
| 185 | [ 0.276021] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 |
| 186 | [ 0.296604] PCI: Using configuration type 1 for base access |
| 187 | [ 0.304236] bio: create slab <bio-0> at 0 |
| 188 | [ 0.308242] ACPI: Added _OSI(Module Device) |
| 189 | [ 0.312028] ACPI: Added _OSI(Processor Device) |
| 190 | [ 0.316022] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 191 | [ 0.320022] ACPI: Added _OSI(Processor Aggregator Device) |
| 192 | [ 0.324290] ACPI: EC: Look up EC in DSDT |
| 193 | [ 0.328771] ACPI: Interpreter enabled |
| 194 | [ 0.332025] ACPI: (supports S0 S5) |
| 195 | [ 0.335476] ACPI: Using IOAPIC for interrupt routing |
| 196 | [ 0.337179] ACPI: No dock devices found. |
| 197 | [ 0.340029] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 198 | [ 0.349856] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-06]) |
| 199 | [ 0.357667] pci_root PNP0A03:00: >host bridge window [io 0x03b0-0x03df] |
| 200 | [ 0.360028] pci_root PNP0A03:00: >host bridge window [io 0x0d00-0x3fff] |
| 201 | [ 0.364027] pci_root PNP0A03:00: >host bridge window [mem 0xc0000000-0xd7ffffff] |
| 202 | [ 0.368027] pci_root PNP0A03:00: >host bridge window [mem 0xe0000000-0xf02fffff] |
| 203 | [ 0.372028] pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff] |
| 204 | [ 0.376028] pci_root PNP0A03:00: >host bridge window [io 0x0000-0x0cf7] |
| 205 | [ 0.380030] pci_root PNP0A03:00: >host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x0000-0x0cf7] ignored |
| 206 | [ 0.384089] PCI host bridge to bus 0000:00 |
| 207 | [ 0.388030] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7] |
| 208 | [ 0.392029] pci_bus 0000:00: >root bus resource [io 0x0d00-0x3fff] |
| 209 | [ 0.396029] pci_bus 0000:00: >root bus resource [mem 0xc0000000-0xd7ffffff] |
| 210 | [ 0.400029] pci_bus 0000:00: >root bus resource [mem 0xe0000000-0xf02fffff] |
| 211 | [ 0.404030] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff] |
| 212 | [ 0.408052] pci 0000:00:00.0: >[1106:0238] type 00 class 0x060000 |
| 213 | [ 0.408068] pci 0000:00:00.0: >reg 10: [mem 0xc0000000-0xcfffffff pref] |
| 214 | [ 0.408177] pci 0000:00:00.1: >[1106:1238] type 00 class 0x060000 |
| 215 | [ 0.408233] pci 0000:00:00.2: >[1106:2238] type 00 class 0x060000 |
| 216 | [ 0.412033] pci 0000:00:00.3: >[1106:3238] type 00 class 0x060000 |
| 217 | [ 0.412089] pci 0000:00:00.4: >[1106:4238] type 00 class 0x060000 |
| 218 | [ 0.412144] pci 0000:00:00.5: >[1106:5238] type 00 class 0x080020 |
| 219 | [ 0.412221] pci 0000:00:00.7: >[1106:7238] type 00 class 0x060000 |
| 220 | [ 0.412280] pci 0000:00:01.0: >[1106:b188] type 01 class 0x060400 |
| 221 | [ 0.412358] pci 0000:00:02.0: >[1106:a238] type 01 class 0x060400 |
| 222 | [ 0.412448] pci 0000:00:02.0: >PME# supported from D0 D3hot D3cold |
| 223 | [ 0.412487] pci 0000:00:03.0: >[1106:c238] type 01 class 0x060400 |
| 224 | [ 0.412576] pci 0000:00:03.0: >PME# supported from D0 D3hot D3cold |
| 225 | [ 0.412610] pci 0000:00:03.1: >[1106:d238] type 01 class 0x060400 |
| 226 | [ 0.412699] pci 0000:00:03.1: >PME# supported from D0 D3hot D3cold |
| 227 | [ 0.412733] pci 0000:00:03.2: >[1106:e238] type 01 class 0x060400 |
| 228 | [ 0.412822] pci 0000:00:03.2: >PME# supported from D0 D3hot D3cold |
| 229 | [ 0.412856] pci 0000:00:03.3: >[1106:f238] type 01 class 0x060400 |
| 230 | [ 0.412944] pci 0000:00:03.3: >PME# supported from D0 D3hot D3cold |
| 231 | [ 0.412998] pci 0000:00:0f.0: >[1106:3149] type 00 class 0x01018f |
| 232 | [ 0.413020] pci 0000:00:0f.0: >reg 10: [io 0x3ca0-0x3ca7] |
| 233 | [ 0.413034] pci 0000:00:0f.0: >reg 14: [io 0x3cb0-0x3cb3] |
| 234 | [ 0.413047] pci 0000:00:0f.0: >reg 18: [io 0x3ca8-0x3caf] |
| 235 | [ 0.413061] pci 0000:00:0f.0: >reg 1c: [io 0x3cb4-0x3cb7] |
| 236 | [ 0.413074] pci 0000:00:0f.0: >reg 20: [io 0x3c80-0x3c8f] |
| 237 | [ 0.413088] pci 0000:00:0f.0: >reg 24: [io 0x3000-0x30ff] |
| 238 | [ 0.413150] pci 0000:00:0f.1: >[1106:0571] type 00 class 0x01018a |
| 239 | [ 0.413204] pci 0000:00:0f.1: >reg 20: [io 0x3c90-0x3c9f] |
| 240 | [ 0.413283] pci 0000:00:10.0: >[1106:3038] type 00 class 0x0c0300 |
| 241 | [ 0.413335] pci 0000:00:10.0: >reg 20: [io 0x3c00-0x3c1f] |
| 242 | [ 0.413382] pci 0000:00:10.0: >supports D1 D2 |
| 243 | [ 0.413387] pci 0000:00:10.0: >PME# supported from D0 D1 D2 D3hot D3cold |
| 244 | [ 0.413413] pci 0000:00:10.1: >[1106:3038] type 00 class 0x0c0300 |
| 245 | [ 0.413464] pci 0000:00:10.1: >reg 20: [io 0x3c20-0x3c3f] |
| 246 | [ 0.413512] pci 0000:00:10.1: >supports D1 D2 |
| 247 | [ 0.413517] pci 0000:00:10.1: >PME# supported from D0 D1 D2 D3hot D3cold |
| 248 | [ 0.413546] pci 0000:00:10.2: >[1106:3038] type 00 class 0x0c0300 |
| 249 | [ 0.413597] pci 0000:00:10.2: >reg 20: [io 0x3c40-0x3c5f] |
| 250 | [ 0.413645] pci 0000:00:10.2: >supports D1 D2 |
| 251 | [ 0.413650] pci 0000:00:10.2: >PME# supported from D0 D1 D2 D3hot D3cold |
| 252 | [ 0.413676] pci 0000:00:10.3: >[1106:3038] type 00 class 0x0c0300 |
| 253 | [ 0.413727] pci 0000:00:10.3: >reg 20: [io 0x3c60-0x3c7f] |
| 254 | [ 0.413774] pci 0000:00:10.3: >supports D1 D2 |
| 255 | [ 0.413779] pci 0000:00:10.3: >PME# supported from D0 D1 D2 D3hot D3cold |
| 256 | [ 0.413805] pci 0000:00:10.4: >[1106:3104] type 00 class 0x0c0320 |
| 257 | [ 0.413826] pci 0000:00:10.4: >reg 10: [mem 0xf0200000-0xf02000ff] |
| 258 | [ 0.413904] pci 0000:00:10.4: >supports D1 D2 |
| 259 | [ 0.413909] pci 0000:00:10.4: >PME# supported from D0 D1 D2 D3hot D3cold |
| 260 | [ 0.413941] pci 0000:00:11.0: >[1106:3227] type 00 class 0x060100 |
| 261 | [ 0.414009] HPET not enabled in BIOS. You might try hpet=force boot option |
| 262 | [ 0.416085] pci 0000:00:11.5: >[1106:3059] type 00 class 0x040100 |
| 263 | [ 0.416107] pci 0000:00:11.5: >reg 10: [io 0x3400-0x34ff] |
| 264 | [ 0.416189] pci 0000:00:11.5: >supports D1 D2 |
| 265 | [ 0.416213] pci 0000:00:11.6: >[1106:3068] type 00 class 0x078000 |
| 266 | [ 0.416235] pci 0000:00:11.6: >reg 10: [io 0x3800-0x38ff] |
| 267 | [ 0.416344] pci 0000:00:18.0: >[1022:1100] type 00 class 0x060000 |
| 268 | [ 0.416383] pci 0000:00:18.1: >[1022:1101] type 00 class 0x060000 |
| 269 | [ 0.416418] pci 0000:00:18.2: >[1022:1102] type 00 class 0x060000 |
| 270 | [ 0.416450] pci 0000:00:18.3: >[1022:1103] type 00 class 0x060000 |
| 271 | [ 0.416551] pci 0000:00:01.0: >PCI bridge to [bus 01-01] |
| 272 | [ 0.420097] pci 0000:02:00.0: >[1002:5b60] type 00 class 0x030000 |
| 273 | [ 0.420116] pci 0000:02:00.0: >reg 10: [mem 0xd0000000-0xd7ffffff pref] |
| 274 | [ 0.420130] pci 0000:02:00.0: >reg 14: [io 0x1000-0x10ff] |
| 275 | [ 0.420144] pci 0000:02:00.0: >reg 18: [mem 0xf0020000-0xf002ffff] |
| 276 | [ 0.420181] pci 0000:02:00.0: >reg 30: [mem 0xf0000000-0xf001ffff pref] |
| 277 | [ 0.420231] pci 0000:02:00.0: >supports D1 D2 |
| 278 | [ 0.420265] pci 0000:02:00.1: >[1002:5b70] type 00 class 0x038000 |
| 279 | [ 0.420282] pci 0000:02:00.1: >reg 10: [mem 0xf0030000-0xf003ffff] |
| 280 | [ 0.420370] pci 0000:02:00.1: >supports D1 D2 |
| 281 | [ 0.420392] pci 0000:02:00.0: >disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| 282 | [ 0.424042] pci 0000:00:02.0: >PCI bridge to [bus 02-02] |
| 283 | [ 0.428033] pci 0000:00:02.0: > bridge window [io 0x1000-0x1fff] |
| 284 | [ 0.428041] pci 0000:00:02.0: > bridge window [mem 0xf0000000-0xf00fffff] |
| 285 | [ 0.428049] pci 0000:00:02.0: > bridge window [mem 0xd0000000-0xd7ffffff pref] |
| 286 | [ 0.428099] pci 0000:00:03.0: >PCI bridge to [bus 03-03] |
| 287 | [ 0.432086] pci 0000:00:03.1: >PCI bridge to [bus 04-04] |
| 288 | [ 0.436107] pci 0000:05:00.0: >[11ab:4362] type 00 class 0x020000 |
| 289 | [ 0.436134] pci 0000:05:00.0: >reg 10: [mem 0xf0120000-0xf0123fff 64bit] |
| 290 | [ 0.436150] pci 0000:05:00.0: >reg 18: [io 0x2000-0x20ff] |
| 291 | [ 0.436196] pci 0000:05:00.0: >reg 30: [mem 0xf0100000-0xf011ffff pref] |
| 292 | [ 0.436268] pci 0000:05:00.0: >supports D1 D2 |
| 293 | [ 0.436273] pci 0000:05:00.0: >PME# supported from D0 D1 D2 D3hot D3cold |
| 294 | [ 0.436292] pci 0000:05:00.0: >disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| 295 | [ 0.440040] pci 0000:00:03.2: >PCI bridge to [bus 05-05] |
| 296 | [ 0.444034] pci 0000:00:03.2: > bridge window [io 0x2000-0x2fff] |
| 297 | [ 0.444042] pci 0000:00:03.2: > bridge window [mem 0xf0100000-0xf01fffff] |
| 298 | [ 0.444094] pci 0000:00:03.3: >PCI bridge to [bus 06-06] |
| 299 | [ 0.448072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
| 300 | [ 0.448203] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGG._PRT] |
| 301 | [ 0.448239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] |
| 302 | [ 0.448269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] |
| 303 | [ 0.448298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] |
| 304 | [ 0.448327] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] |
| 305 | [ 0.448360] pci0000:00: >Unable to request _OSC control (_OSC support mask: 0x0f) |
| 306 | [ 0.459493] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none |
| 307 | [ 0.460033] vgaarb: loaded |
| 308 | [ 0.464031] vgaarb: bridge control possible 0000:02:00.0 |
| 309 | [ 0.468432] SCSI subsystem initialized |
| 310 | [ 0.472139] libata version 3.00 loaded. |
| 311 | [ 0.472180] ACPI: bus type usb registered |
| 312 | [ 0.476094] usbcore: registered new interface driver usbfs |
| 313 | [ 0.480050] usbcore: registered new interface driver hub |
| 314 | [ 0.484076] usbcore: registered new device driver usb |
| 315 | [ 0.492076] PCI: Using ACPI for IRQ routing |
| 316 | [ 0.504935] PCI: pci_cache_line_size set to 64 bytes |
| 317 | [ 0.505090] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| 318 | [ 0.505094] e820: reserve RAM buffer [mem 0x1ffe0000-0x1fffffff] |
| 319 | [ 0.505292] NetLabel: Initializing |
| 320 | [ 0.508035] NetLabel: domain hash size = 128 |
| 321 | [ 0.512033] NetLabel: protocols = UNLABELED CIPSOv4 |
| 322 | [ 0.516058] NetLabel: unlabeled traffic allowed by default |
| 323 | [ 0.539241] AppArmor: AppArmor Filesystem Enabled |
| 324 | [ 0.540091] pnp: PnP ACPI init |
| 325 | [ 0.544077] ACPI: bus type pnp registered |
| 326 | [ 0.553865] pnp 00:00: >[bus 00-06] |
| 327 | [ 0.553873] pnp 00:00: >[io 0x03b0-0x03df window] |
| 328 | [ 0.553878] pnp 00:00: >[io 0x0d00-0x3fff window] |
| 329 | [ 0.553884] pnp 00:00: >[mem 0xc0000000-0xd7ffffff window] |
| 330 | [ 0.553889] pnp 00:00: >[mem 0xe0000000-0xf02fffff window] |
| 331 | [ 0.553894] pnp 00:00: >[mem 0x000a0000-0x000bffff window] |
| 332 | [ 0.553899] pnp 00:00: >[io 0x0cf8-0x0cff] |
| 333 | [ 0.553905] pnp 00:00: >[io 0x0000-0x0cf7 window] |
| 334 | [ 0.553961] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active) |
| 335 | [ 0.554025] pnp 00:01: >[io 0x0060] |
| 336 | [ 0.554030] pnp 00:01: >[io 0x0064] |
| 337 | [ 0.554050] pnp 00:01: >[irq 1] |
| 338 | [ 0.554100] pnp 00:01: >Plug and Play ACPI device, IDs PNP0303 (active) |
| 339 | [ 0.554152] pnp 00:02: >[irq 12] |
| 340 | [ 0.554195] pnp 00:02: >Plug and Play ACPI device, IDs PNP0f13 (active) |
| 341 | [ 0.554240] pnp 00:03: >[io 0x03f2-0x03f5] |
| 342 | [ 0.554246] pnp 00:03: >[io 0x03f7] |
| 343 | [ 0.554256] pnp 00:03: >[irq 6] |
| 344 | [ 0.554261] pnp 00:03: >[dma 2] |
| 345 | [ 0.554310] pnp 00:03: >Plug and Play ACPI device, IDs PNP0700 (active) |
| 346 | [ 0.554333] pnp 00:04: >[mem 0xfec00000-0xfec000ff] |
| 347 | [ 0.554338] pnp 00:04: >[mem 0xff000000-0xffffffff] |
| 348 | [ 0.554348] pnp 00:04: >[mem 0xfecc0000-0xfecc00ff] |
| 349 | [ 0.554353] pnp 00:04: >[mem 0xe0000000-0xefffffff] |
| 350 | [ 0.554358] pnp 00:04: >[io 0x0500-0x057f] |
| 351 | [ 0.554363] pnp 00:04: >[io 0x04d0-0x04d1] |
| 352 | [ 0.554368] pnp 00:04: >[io 0x0400-0x040f] |
| 353 | [ 0.554479] system 00:04: >[io 0x0500-0x057f] has been reserved |
| 354 | [ 0.556041] system 00:04: >[io 0x04d0-0x04d1] has been reserved |
| 355 | [ 0.560040] system 00:04: >[io 0x0400-0x040f] has been reserved |
| 356 | [ 0.564042] system 00:04: >[mem 0xfec00000-0xfec000ff] could not be reserved |
| 357 | [ 0.568041] system 00:04: >[mem 0xff000000-0xffffffff] has been reserved |
| 358 | [ 0.572041] system 00:04: >[mem 0xfecc0000-0xfecc00ff] could not be reserved |
| 359 | [ 0.576041] system 00:04: >[mem 0xe0000000-0xefffffff] has been reserved |
| 360 | [ 0.580043] system 00:04: >Plug and Play ACPI device, IDs PNP0c02 (active) |
| 361 | [ 0.580052] pnp: PnP ACPI: found 5 devices |
| 362 | [ 0.584038] ACPI: ACPI bus type pnp unregistered |
| 363 | [ 0.596457] Switching to clocksource acpi_pm |
| 364 | [ 0.600139] pci 0000:00:03.0: >bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000 |
| 365 | [ 0.600148] pci 0000:00:03.0: >bridge window [mem 0x00100000-0x000fffff pref] to [bus 03-03] add_size 200000 |
| 366 | [ 0.600155] pci 0000:00:03.0: >bridge window [mem 0x00100000-0x000fffff] to [bus 03-03] add_size 200000 |
| 367 | [ 0.600164] pci 0000:00:03.1: >bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000 |
| 368 | [ 0.600171] pci 0000:00:03.1: >bridge window [mem 0x00100000-0x000fffff pref] to [bus 04-04] add_size 200000 |
| 369 | [ 0.600178] pci 0000:00:03.1: >bridge window [mem 0x00100000-0x000fffff] to [bus 04-04] add_size 200000 |
| 370 | [ 0.600188] pci 0000:00:03.2: >bridge window [mem 0x00100000-0x000fffff pref] to [bus 05-05] add_size 200000 |
| 371 | [ 0.600198] pci 0000:00:03.3: >bridge window [io 0x1000-0x0fff] to [bus 06-06] add_size 1000 |
| 372 | [ 0.600205] pci 0000:00:03.3: >bridge window [mem 0x00100000-0x000fffff pref] to [bus 06-06] add_size 200000 |
| 373 | [ 0.600212] pci 0000:00:03.3: >bridge window [mem 0x00100000-0x000fffff] to [bus 06-06] add_size 200000 |
| 374 | [ 0.600241] pci 0000:00:03.0: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 |
| 375 | [ 0.600247] pci 0000:00:03.0: >res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000 |
| 376 | [ 0.600254] pci 0000:00:03.1: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 |
| 377 | [ 0.600260] pci 0000:00:03.1: >res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000 |
| 378 | [ 0.600267] pci 0000:00:03.2: >res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000 |
| 379 | [ 0.600273] pci 0000:00:03.3: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 |
| 380 | [ 0.600279] pci 0000:00:03.3: >res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000 |
| 381 | [ 0.600285] pci 0000:00:03.0: >res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 |
| 382 | [ 0.600291] pci 0000:00:03.1: >res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 |
| 383 | [ 0.600297] pci 0000:00:03.3: >res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 |
| 384 | [ 0.600308] pci 0000:00:03.0: >BAR 14: can't assign mem (size 0x200000) |
| 385 | [ 0.606930] pci 0000:00:03.0: >BAR 15: can't assign mem pref (size 0x200000) |
| 386 | [ 0.613985] pci 0000:00:03.1: >BAR 14: can't assign mem (size 0x200000) |
| 387 | [ 0.620603] pci 0000:00:03.1: >BAR 15: can't assign mem pref (size 0x200000) |
| 388 | [ 0.627659] pci 0000:00:03.2: >BAR 15: can't assign mem pref (size 0x200000) |
| 389 | [ 0.634711] pci 0000:00:03.3: >BAR 14: can't assign mem (size 0x200000) |
| 390 | [ 0.641334] pci 0000:00:03.3: >BAR 15: can't assign mem pref (size 0x200000) |
| 391 | [ 0.648391] pci 0000:00:03.0: >BAR 13: can't assign io (size 0x1000) |
| 392 | [ 0.654751] pci 0000:00:03.1: >BAR 13: can't assign io (size 0x1000) |
| 393 | [ 0.661112] pci 0000:00:03.3: >BAR 13: can't assign io (size 0x1000) |
| 394 | [ 0.667477] pci 0000:00:01.0: >PCI bridge to [bus 01-01] |
| 395 | [ 0.672803] pci 0000:00:02.0: >PCI bridge to [bus 02-02] |
| 396 | [ 0.678123] pci 0000:00:02.0: > bridge window [io 0x1000-0x1fff] |
| 397 | [ 0.684313] pci 0000:00:02.0: > bridge window [mem 0xf0000000-0xf00fffff] |
| 398 | [ 0.691193] pci 0000:00:02.0: > bridge window [mem 0xd0000000-0xd7ffffff pref] |
| 399 | [ 0.698510] pci 0000:00:03.0: >PCI bridge to [bus 03-03] |
| 400 | [ 0.703838] pci 0000:00:03.1: >PCI bridge to [bus 04-04] |
| 401 | [ 0.709168] pci 0000:00:03.2: >PCI bridge to [bus 05-05] |
| 402 | [ 0.714487] pci 0000:00:03.2: > bridge window [io 0x2000-0x2fff] |
| 403 | [ 0.720679] pci 0000:00:03.2: > bridge window [mem 0xf0100000-0xf01fffff] |
| 404 | [ 0.727563] pci 0000:00:03.3: >PCI bridge to [bus 06-06] |
| 405 | [ 0.732897] pci 0000:00:01.0: >setting latency timer to 64 |
| 406 | [ 0.732986] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7] |
| 407 | [ 0.732991] pci_bus 0000:00: >resource 5 [io 0x0d00-0x3fff] |
| 408 | [ 0.732997] pci_bus 0000:00: >resource 6 [mem 0xc0000000-0xd7ffffff] |
| 409 | [ 0.733002] pci_bus 0000:00: >resource 7 [mem 0xe0000000-0xf02fffff] |
| 410 | [ 0.733008] pci_bus 0000:00: >resource 8 [mem 0x000a0000-0x000bffff] |
| 411 | [ 0.733014] pci_bus 0000:02: >resource 0 [io 0x1000-0x1fff] |
| 412 | [ 0.733020] pci_bus 0000:02: >resource 1 [mem 0xf0000000-0xf00fffff] |
| 413 | [ 0.733025] pci_bus 0000:02: >resource 2 [mem 0xd0000000-0xd7ffffff pref] |
| 414 | [ 0.733031] pci_bus 0000:05: >resource 0 [io 0x2000-0x2fff] |
| 415 | [ 0.733037] pci_bus 0000:05: >resource 1 [mem 0xf0100000-0xf01fffff] |
| 416 | [ 0.733115] NET: Registered protocol family 2 |
| 417 | [ 0.737583] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) |
| 418 | [ 0.744823] TCP established hash table entries: 16384 (order: 6, 262144 bytes) |
| 419 | [ 0.752298] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) |
| 420 | [ 0.759115] TCP: Hash tables configured (established 16384 bind 16384) |
| 421 | [ 0.765645] TCP: reno registered |
| 422 | [ 0.768882] UDP hash table entries: 256 (order: 1, 8192 bytes) |
| 423 | [ 0.774730] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) |
| 424 | [ 0.781128] NET: Registered protocol family 1 |
| 425 | [ 0.785542] pci 0000:00:01.0: >disabling DAC on VIA PCI bridge |
| 426 | [ 0.791383] pci 0000:00:02.0: >MSI quirk detected; subordinate MSI disabled |
| 427 | [ 0.798560] pci 0000:02:00.0: >Boot video device |
| 428 | [ 0.798575] PCI: CLS 64 bytes, default 64 |
| 429 | [ 0.798733] agpgart-amd64 0000:00:00.0: >AGP bridge [1106/0238] |
| 430 | [ 0.804666] agpgart-amd64 0000:00:00.0: >aperture from AGP @ c0000000 size 256 MB |
| 431 | [ 0.812252] Trying to unpack rootfs image as initramfs... |
| 432 | [ 0.848308] agpgart-amd64 0000:00:00.0: >AGP aperture is 256M @ 0xc0000000 |
| 433 | [ 0.855372] platform rtc_cmos: >registered platform RTC device (no PNP device found) |
| 434 | [ 0.872643] audit: initializing netlink socket (disabled) |
| 435 | [ 0.884086] type=2000 audit(0.880:1): initialized |
| 436 | [ 1.001238] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 437 | [ 1.019648] VFS: Disk quotas dquot_6.5.2 |
| 438 | [ 1.028625] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 439 | [ 1.048299] fuse init (API version 7.19) |
| 440 | [ 1.052430] msgmni has been set to 946 |
| 441 | [ 1.072398] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| 442 | [ 1.088110] io scheduler noop registered |
| 443 | [ 1.092062] io scheduler deadline registered (default) |
| 444 | [ 1.104370] io scheduler cfq registered |
| 445 | [ 1.113167] ioapic: probe of 0000:00:00.5 failed with error -22 |
| 446 | [ 1.124626] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 447 | [ 1.136426] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 448 | [ 1.148367] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 |
| 449 | [ 1.164413] ACPI: Power Button [PWRF] |
| 450 | [ 1.173200] GHES: HEST is not enabled! |
| 451 | [ 1.180487] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled |
| 452 | [ 1.216478] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| 453 | [ 1.250590] Linux agpgart interface v0.103 |
| 454 | [ 1.268940] brd: module loaded |
| 455 | [ 1.273575] loop: module loaded |
| 456 | [ 1.281220] Fixed MDIO Bus: probed |
| 457 | [ 1.288637] tun: Universal TUN/TAP device driver, 1.6 |
| 458 | [ 1.293702] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> |
| 459 | [ 1.312150] PPP generic driver version 2.4.2 |
| 460 | [ 1.320639] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 461 | [ 1.336211] ehci_hcd 0000:00:10.4: >EHCI Host Controller |
| 462 | [ 1.341561] ehci_hcd 0000:00:10.4: >new USB bus registered, assigned bus number 1 |
| 463 | [ 1.356531] ehci_hcd 0000:00:10.4: >irq 21, io mem 0xf0200000 |
| 464 | [ 1.380278] ehci_hcd 0000:00:10.4: >USB 2.0 started, EHCI 1.00 |
| 465 | [ 1.392315] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002 |
| 466 | [ 1.399205] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 467 | [ 1.406522] usb usb1: >Product: EHCI Host Controller |
| 468 | [ 1.411495] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd |
| 469 | [ 1.417859] usb usb1: >SerialNumber: 0000:00:10.4 |
| 470 | [ 1.452393] hub 1-0:1.0: >USB hub found |
| 471 | [ 1.460245] hub 1-0:1.0: >8 ports detected |
| 472 | [ 1.468609] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| 473 | [ 1.480265] uhci_hcd: USB Universal Host Controller Interface driver |
| 474 | [ 1.492484] uhci_hcd 0000:00:10.0: >UHCI Host Controller |
| 475 | [ 1.497829] uhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 2 |
| 476 | [ 1.512185] uhci_hcd 0000:00:10.0: >irq 21, io base 0x00003c00 |
| 477 | [ 1.524153] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001 |
| 478 | [ 1.531041] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 479 | [ 1.538350] usb usb2: >Product: UHCI Host Controller |
| 480 | [ 1.543324] usb usb2: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd |
| 481 | [ 1.549687] usb usb2: >SerialNumber: 0000:00:10.0 |
| 482 | [ 1.588666] hub 2-0:1.0: >USB hub found |
| 483 | [ 1.596427] hub 2-0:1.0: >2 ports detected |
| 484 | [ 1.604275] uhci_hcd 0000:00:10.1: >UHCI Host Controller |
| 485 | [ 1.616273] uhci_hcd 0000:00:10.1: >new USB bus registered, assigned bus number 3 |
| 486 | [ 1.628160] uhci_hcd 0000:00:10.1: >irq 21, io base 0x00003c20 |
| 487 | [ 1.640389] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001 |
| 488 | [ 1.647282] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 489 | [ 1.654595] usb usb3: >Product: UHCI Host Controller |
| 490 | [ 1.659569] usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd |
| 491 | [ 1.665934] usb usb3: >SerialNumber: 0000:00:10.1 |
| 492 | [ 1.700301] hub 3-0:1.0: >USB hub found |
| 493 | [ 1.708150] hub 3-0:1.0: >2 ports detected |
| 494 | [ 1.716414] uhci_hcd 0000:00:10.2: >UHCI Host Controller |
| 495 | [ 1.728064] uhci_hcd 0000:00:10.2: >new USB bus registered, assigned bus number 4 |
| 496 | [ 1.744288] uhci_hcd 0000:00:10.2: >irq 21, io base 0x00003c40 |
| 497 | [ 1.756150] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001 |
| 498 | [ 1.763040] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 499 | [ 1.770357] usb usb4: >Product: UHCI Host Controller |
| 500 | [ 1.775331] usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd |
| 501 | [ 1.781695] usb usb4: >SerialNumber: 0000:00:10.2 |
| 502 | [ 1.816658] hub 4-0:1.0: >USB hub found |
| 503 | [ 1.824032] hub 4-0:1.0: >2 ports detected |
| 504 | [ 1.832347] uhci_hcd 0000:00:10.3: >UHCI Host Controller |
| 505 | [ 1.844517] uhci_hcd 0000:00:10.3: >new USB bus registered, assigned bus number 5 |
| 506 | [ 1.860415] uhci_hcd 0000:00:10.3: >irq 21, io base 0x00003c60 |
| 507 | [ 1.872327] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001 |
| 508 | [ 1.879220] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 509 | [ 1.886534] usb usb5: >Product: UHCI Host Controller |
| 510 | [ 1.891529] usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd |
| 511 | [ 1.897890] usb usb5: >SerialNumber: 0000:00:10.3 |
| 512 | [ 1.932331] hub 5-0:1.0: >USB hub found |
| 513 | [ 1.940291] hub 5-0:1.0: >2 ports detected |
| 514 | [ 1.948398] usbcore: registered new interface driver libusual |
| 515 | [ 1.954185] Refined TSC clocksource calibration: 1000.035 MHz. |
| 516 | [ 1.964424] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 |
| 517 | [ 1.972469] Switching to clocksource tsc |
| 518 | [ 1.984628] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 519 | [ 1.996044] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 520 | [ 2.001342] mousedev: PS/2 mouse device common for all mice |
| 521 | [ 2.012626] rtc_cmos rtc_cmos: >RTC can wake from S4 |
| 522 | [ 2.020650] rtc_cmos rtc_cmos: >rtc core: registered rtc_cmos as rtc0 |
| 523 | [ 2.035226] rtc0: alarms up to one year, y3k, 114 bytes nvram |
| 524 | [ 2.044817] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 |
| 525 | [ 2.056431] device-mapper: uevent: version 1.0.3 |
| 526 | [ 2.067404] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com |
| 527 | [ 2.084036] cpuidle: using governor ladder |
| 528 | [ 2.092406] cpuidle: using governor menu |
| 529 | [ 2.096342] EFI Variables Facility v0.08 2004-May-17 |
| 530 | [ 2.112515] ashmem: initialized |
| 531 | [ 2.120666] TCP: cubic registered |
| 532 | [ 2.124256] NET: Registered protocol family 10 |
| 533 | [ 2.136578] NET: Registered protocol family 17 |
| 534 | [ 2.148116] Key type dns_resolver registered |
| 535 | [ 2.152684] PM: Hibernation image not present or could not be loaded. |
| 536 | [ 2.152709] registered taskstats version 1 |
| 537 | [ 2.174802] Freeing initrd memory: 14876k freed |
| 538 | [ 2.197142] Key type trusted registered |
| 539 | [ 2.205383] Key type encrypted registered |
| 540 | [ 2.214347] Magic number: 14:594:48 |
| 541 | [ 2.218212] rtc_cmos rtc_cmos: >setting system clock to 2014-01-03 23:01:26 UTC (1388790086) |
| 542 | [ 2.226733] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ (1 cpu cores) (version 2.20.00) |
| 543 | [ 2.235782] powernow-k8: fid 0xa (1800 MHz), vid 0x4 |
| 544 | [ 2.240759] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 |
| 545 | [ 2.245852] Marking TSC unstable due to cpufreq changes |
| 546 | [ 2.251735] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found |
| 547 | [ 2.262576] EDD information not available. |
| 548 | [ 2.269958] Switching to clocksource acpi_pm |
| 549 | [ 2.279922] Freeing unused kernel memory: 928k freed |
| 550 | [ 2.285558] Write protecting the kernel read-only data: 12288k |
| 551 | [ 2.297890] Freeing unused kernel memory: 1472k freed |
| 552 | [ 2.308953] Freeing unused kernel memory: 1124k freed |
| 553 | [ 2.342547] udevd[83]: starting version 175 |
| 554 | [ 2.478167] sky2: driver version 1.30 |
| 555 | [ 2.495680] pata_via 0000:00:0f.1: >version 0.3.4 |
| 556 | [ 2.498165] Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?) |
| 557 | [ 2.506465] scsi0 : pata_via |
| 558 | [ 2.509489] scsi1 : pata_via |
| 559 | [ 2.512431] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3c90 irq 14 |
| 560 | [ 2.519392] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3c98 irq 15 |
| 561 | [ 2.551152] sata_via 0000:00:0f.0: >version 2.6 |
| 562 | [ 2.551209] sata_via 0000:00:0f.0: >routed to hard irq line 0 |
| 563 | [ 2.562040] sky2 0000:05:00.0: >PCI: Disallowing DAC for device |
| 564 | [ 2.568035] scsi2 : sata_via |
| 565 | [ 2.573610] scsi3 : sata_via |
| 566 | [ 2.578052] sky2 0000:05:00.0: >Yukon-2 EC chip revision 2 |
| 567 | [ 2.585089] ata3: SATA max UDMA/133 cmd 0x3ca0 ctl 0x3cb0 bmdma 0x3c80 irq 20 |
| 568 | [ 2.592246] ata4: SATA max UDMA/133 cmd 0x3ca8 ctl 0x3cb4 bmdma 0x3c88 irq 20 |
| 569 | [ 2.603543] sky2 0000:05:00.0: >eth0: addr 00:13:d4:76:a2:ac |
| 570 | [ 2.640021] FDC 0 is a post-1991 82077 |
| 571 | [ 2.800022] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) |
| 572 | [ 2.968892] ata3.00: ATA-8: WDC WD1600AAJS-00B4A0, 01.03A01, max UDMA/133 |
| 573 | [ 2.975682] ata3.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 0/32) |
| 574 | [ 2.988885] ata3.00: configured for UDMA/133 |
| 575 | [ 2.993292] scsi 2:0:0:0: >Direct-Access ATA WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5 |
| 576 | [ 3.001730] sd 2:0:0:0: >[sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) |
| 577 | [ 3.009449] sd 2:0:0:0: >Attached scsi generic sg0 type 0 |
| 578 | [ 3.014896] sd 2:0:0:0: >[sda] Write Protect is off |
| 579 | [ 3.019780] sd 2:0:0:0: >[sda] Mode Sense: 00 3a 00 00 |
| 580 | [ 3.019925] sd 2:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 581 | [ 3.086110] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > |
| 582 | [ 3.091651] sd 2:0:0:0: >[sda] Attached SCSI disk |
| 583 | [ 3.220018] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300) |
| 584 | [ 3.830968] EXT4-fs (sda7): INFO: recovery required on readonly filesystem |
| 585 | [ 3.837858] EXT4-fs (sda7): write access will be enabled during recovery |
| 586 | [ 4.365315] EXT4-fs (sda7): recovery complete |
| 587 | [ 4.372548] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) |
| 588 | [ 12.240176] Adding 979928k swap on /dev/sda6. Priority:-1 extents:1 across:979928k |
| 589 | [ 12.592246] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 590 | [ 12.679697] udevd[302]: starting version 175 |
| 591 | [ 12.735695] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro |
| 592 | [ 13.026791] lp: driver loaded but no devices found |
| 593 | [ 14.231949] ppdev: user-space parallel port driver |
| 594 | [ 14.263571] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] |
| 595 | [ 14.264188] parport0: irq 7 detected |
| 596 | [ 14.266065] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| 597 | [ 14.330506] Bluetooth: Core ver 2.16 |
| 598 | [ 14.330600] NET: Registered protocol family 31 |
| 599 | [ 14.330603] Bluetooth: HCI device and connection manager initialized |
| 600 | [ 14.330606] Bluetooth: HCI socket layer initialized |
| 601 | [ 14.330608] Bluetooth: L2CAP socket layer initialized |
| 602 | [ 14.330614] Bluetooth: SCO socket layer initialized |
| 603 | [ 14.360228] lp0: using parport0 (polling). |
| 604 | [ 14.391291] Bluetooth: RFCOMM TTY layer initialized |
| 605 | [ 14.391301] Bluetooth: RFCOMM socket layer initialized |
| 606 | [ 14.391304] Bluetooth: RFCOMM ver 1.11 |
| 607 | [ 14.412359] [drm] Initialized drm 1.1.0 20060810 |
| 608 | [ 14.460751] MCE: In-kernel MCE decoding enabled. |
| 609 | [ 14.485020] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| 610 | [ 14.485025] Bluetooth: BNEP filters: protocol multicast |
| 611 | [ 14.518586] EDAC MC: Ver: 2.1.0 |
| 612 | [ 14.568955] AMD64 EDAC driver v3.4.0 |
| 613 | [ 14.569009] EDAC amd64: DRAM ECC disabled. |
| 614 | [ 14.569013] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| 615 | [ 14.569013] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| 616 | [ 14.569013] (Note that use of the override may cause unknown side effects.) |
| 617 | [ 14.625135] microcode: AMD CPU family 0xf not supported |
| 618 | [ 15.048749] [drm] radeon defaulting to kernel modesetting. |
| 619 | [ 15.048756] [drm] radeon kernel modesetting enabled. |
| 620 | [ 15.049235] [drm] initializing kernel modesetting (RV380 0x1002:0x5B60 0x1043:0x0083). |
| 621 | [ 15.049242] radeon 0000:02:00.0: >PCI: Disallowing DAC for device |
| 622 | [ 15.049244] radeon: No suitable DMA available. |
| 623 | [ 15.049260] [drm] register mmio base: 0xF0020000 |
| 624 | [ 15.049262] [drm] register mmio size: 65536 |
| 625 | [ 15.049391] [drm] Generation 2 PCI interface, using max accessible memory |
| 626 | [ 15.049398] radeon 0000:02:00.0: >VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used) |
| 627 | [ 15.049402] radeon 0000:02:00.0: >GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF |
| 628 | [ 15.049419] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). |
| 629 | [ 15.049421] [drm] Driver supports precise vblank timestamp query. |
| 630 | [ 15.049454] [drm] radeon: irq initialized. |
| 631 | [ 15.049733] [drm] Detected VRAM RAM=128M, BAR=128M |
| 632 | [ 15.049738] [drm] RAM width 64bits DDR |
| 633 | [ 15.049921] [TTM] Zone kernel: Available graphics memory: 251566 kiB |
| 634 | [ 15.049923] [TTM] Initializing pool allocator |
| 635 | [ 15.049930] [TTM] Initializing DMA pool allocator |
| 636 | [ 15.049970] [drm] radeon: 128M of VRAM memory ready |
| 637 | [ 15.049972] [drm] radeon: 512M of GTT memory ready. |
| 638 | [ 15.049998] [drm] GART: num cpu pages 131072, num gpu pages 131072 |
| 639 | [ 15.054456] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. |
| 640 | [ 15.055588] [drm] PCIE GART of 512M enabled (table at 0x00000000D0040000). |
| 641 | [ 15.055621] radeon 0000:02:00.0: >WB enabled |
| 642 | [ 15.055626] radeon 0000:02:00.0: >fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff88000d9c5000 |
| 643 | [ 15.057795] [drm] Loading R300 Microcode |
| 644 | [ 15.268261] [drm] radeon: ring at 0x00000000B0001000 |
| 645 | [ 15.268288] [drm] ring test succeeded in 1 usecs |
| 646 | [ 15.268522] [drm] ib test succeeded in 0 usecs |
| 647 | [ 15.268771] [drm] Radeon Display Connectors |
| 648 | [ 15.268774] [drm] Connector 0: |
| 649 | [ 15.268775] [drm] VGA-1 |
| 650 | [ 15.268778] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 |
| 651 | [ 15.268780] [drm] Encoders: |
| 652 | [ 15.268781] [drm] CRT1: INTERNAL_DAC1 |
| 653 | [ 15.268783] [drm] Connector 1: |
| 654 | [ 15.268785] [drm] DVI-I-1 |
| 655 | [ 15.268786] [drm] HPD1 |
| 656 | [ 15.268789] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 |
| 657 | [ 15.268790] [drm] Encoders: |
| 658 | [ 15.268791] [drm] CRT2: INTERNAL_DAC2 |
| 659 | [ 15.268793] [drm] DFP1: INTERNAL_TMDS1 |
| 660 | [ 15.268794] [drm] Connector 2: |
| 661 | [ 15.268796] [drm] SVIDEO-1 |
| 662 | [ 15.268797] [drm] Encoders: |
| 663 | [ 15.268799] [drm] TV1: INTERNAL_DAC2 |
| 664 | [ 15.333943] [drm] fb mappable at 0xD00C0000 |
| 665 | [ 15.333948] [drm] vram apper at 0xD0000000 |
| 666 | [ 15.333950] [drm] size 5242880 |
| 667 | [ 15.333952] [drm] fb depth is 24 |
| 668 | [ 15.333953] [drm] pitch is 5120 |
| 669 | [ 15.334200] fbcon: radeondrmfb (fb0) is primary device |
| 670 | [ 15.398619] Console: switching to colour frame buffer device 160x64 |
| 671 | [ 15.405947] fb0: radeondrmfb frame buffer device |
| 672 | [ 15.405950] drm: registered panic notifier |
| 673 | [ 15.410093] [drm] Initialized radeon 2.18.0 20080528 for 0000:02:00.0 on minor 0 |
| 674 | [ 15.494217] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input2 |
| 675 | [ 15.633893] init: plymouth main process (220) killed by ABRT signal |
| 676 | [ 15.634383] init: plymouth-splash main process (635) terminated with status 2 |
| 677 | [ 15.714145] init: failsafe main process (533) killed by TERM signal |
| 678 | [ 16.280030] snd_via82xx_modem 0000:00:11.6: >setting latency timer to 64 |
| 679 | [ 16.784263] snd_via82xx_modem: probe of 0000:00:11.6 failed with error -13 |
| 680 | [ 16.786051] snd_via82xx 0000:00:11.5: >setting latency timer to 64 |
| 681 | [ 16.910618] sky2 0000:05:00.0: >eth3: enabling interface |
| 682 | [ 16.910745] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready |
| 683 | [ 16.911346] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready |
| 684 | [ 19.951465] sky2 0000:05:00.0: >eth3: Link is up at 1000 Mbps, full duplex, flow control both |
| 685 | [ 19.951521] IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready |
| 686 | [ 22.255779] init: plymouth-stop pre-start process (1402) terminated with status 1 |
| 687 | [ 32.040079] end_request: I/O error, dev fd1, sector 0 |
| 688 | [ 32.732078] end_request: I/O error, dev fd0, sector 0 |
| 689 | [ 38.760081] end_request: I/O error, dev fd1, sector 0 |
| 690 | [ 44.792075] end_request: I/O error, dev fd0, sector 0 |