Gitiles
Code Review Sign In
review.coreboot.org / board-status / f2d44b56679b5489d9dbcc07f7700a8d7d3b58ee / . / lenovo / x220 / 4.0-6835-g8603513 / 2014-08-30T17:27:18Z / kernel_log.txt
blob: 627f0c1c029f96b0d174f157a9d96aafa8a15b6a [file] [log] [blame]
Vladimir Serbinenko3d2cdfb2014-08-30 19:38:02 +0200[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.14-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-7) ) #1 SMP Debian 3.14.15-2 (2014-08-09)
5[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
8[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
9[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
11[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
13[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bfecffff] usable
15[ 0.000000] BIOS-e820: [mem 0x00000000bfed0000-0x00000000bfffffff] type 16
16[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved
17[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
18[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043b5fffff] usable
19[ 0.000000] NX (Execute Disable) protection: active
20[ 0.000000] SMBIOS 2.7 present.
21[ 0.000000] DMI: LENOVO 4299Y48/4299Y48, BIOS CBET4000 4.0-6835-g8603513 08/30/2014
22[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
23[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
24[ 0.000000] No AGP bridge found
25[ 0.000000] e820: last_pfn = 0x43b600 max_arch_pfn = 0x400000000
26[ 0.000000] MTRR default type: write-back
27[ 0.000000] MTRR fixed ranges enabled:
28[ 0.000000] 00000-9FFFF write-back
29[ 0.000000] A0000-BFFFF uncachable
30[ 0.000000] C0000-FFFFF write-back
31[ 0.000000] MTRR variable ranges enabled:
32[ 0.000000] 0 base 0C0000000 mask FF0000000 uncachable
33[ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining
34[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
35[ 0.000000] 3 disabled
36[ 0.000000] 4 disabled
37[ 0.000000] 5 disabled
38[ 0.000000] 6 disabled
39[ 0.000000] 7 disabled
40[ 0.000000] 8 disabled
41[ 0.000000] 9 disabled
42[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
43[ 0.000000] e820: last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
44[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
45[ 0.000000] reserving inaccessible SNB gfx pages
46[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
47[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
48[ 0.000000] BRK [0x01aaf000, 0x01aaffff] PGTABLE
49[ 0.000000] BRK [0x01ab0000, 0x01ab0fff] PGTABLE
50[ 0.000000] BRK [0x01ab1000, 0x01ab1fff] PGTABLE
51[ 0.000000] init_memory_mapping: [mem 0x43b400000-0x43b5fffff]
52[ 0.000000] [mem 0x43b400000-0x43b5fffff] page 2M
53[ 0.000000] BRK [0x01ab2000, 0x01ab2fff] PGTABLE
54[ 0.000000] init_memory_mapping: [mem 0x438000000-0x43b3fffff]
55[ 0.000000] [mem 0x438000000-0x43b3fffff] page 2M
56[ 0.000000] init_memory_mapping: [mem 0x400000000-0x437ffffff]
57[ 0.000000] [mem 0x400000000-0x437ffffff] page 2M
58[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
59[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
60[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
61[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
62[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
63[ 0.000000] init_memory_mapping: [mem 0x40200000-0xbfecffff]
64[ 0.000000] [mem 0x40200000-0xbfdfffff] page 2M
65[ 0.000000] [mem 0xbfe00000-0xbfecffff] page 4k
66[ 0.000000] BRK [0x01ab3000, 0x01ab3fff] PGTABLE
67[ 0.000000] BRK [0x01ab4000, 0x01ab4fff] PGTABLE
68[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
69[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
70[ 0.000000] RAMDISK: [mem 0x360be000-0x37056fff]
71[ 0.000000] ACPI: RSDP 00000000000f0000 000024 (v02 CORE )
72[ 0.000000] ACPI: XSDT 00000000bfee10e0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
73[ 0.000000] ACPI: FACP 00000000bfee48c0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000001)
74[ 0.000000] ACPI: DSDT 00000000bfee1250 00366E (v02 COREv4 COREBOOT 20110725 INTL 20140724)
75[ 0.000000] ACPI: FACS 00000000bfee1210 000040
76[ 0.000000] ACPI: HPET 00000000bfee49c0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
77[ 0.000000] ACPI: APIC 00000000bfee4a00 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
78[ 0.000000] ACPI: MCFG 00000000bfee4a70 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
79[ 0.000000] ACPI: SSDT 00000000bfee5ab0 00122C (v02 CORE COREBOOT 0000002A CORE 0000002A)
80[ 0.000000] ACPI: Local APIC address 0xfee00000
81[ 0.000000] No NUMA configuration found
82[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043b5fffff]
83[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43b5fffff]
84[ 0.000000] NODE_DATA [mem 0x43b5ee000-0x43b5f2fff]
85[ 0.000000] [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042ac00000-ffff880438bfffff] on node 0
86[ 0.000000] Zone ranges:
87[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
88[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
89[ 0.000000] Normal [mem 0x100000000-0x43b5fffff]
90[ 0.000000] Movable zone start for each node
91[ 0.000000] Early memory node ranges
92[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
93[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
94[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
95[ 0.000000] node 0: [mem 0x40200000-0xbfecffff]
96[ 0.000000] node 0: [mem 0x100000000-0x43b5fffff]
97[ 0.000000] On node 0 totalpages: 4173935
98[ 0.000000] DMA zone: 56 pages used for memmap
99[ 0.000000] DMA zone: 159 pages reserved
100[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
101[ 0.000000] DMA32 zone: 10678 pages used for memmap
102[ 0.000000] DMA32 zone: 781008 pages, LIFO batch:31
103[ 0.000000] Normal zone: 46333 pages used for memmap
104[ 0.000000] Normal zone: 3388928 pages, LIFO batch:31
105[ 0.000000] ACPI: PM-Timer IO Port: 0x508
106[ 0.000000] ACPI: Local APIC address 0xfee00000
107[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
108[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
109[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
110[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
111[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
112[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
113[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
114[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
115[ 0.000000] ACPI: IRQ0 used by override.
116[ 0.000000] ACPI: IRQ2 used by override.
117[ 0.000000] ACPI: IRQ9 used by override.
118[ 0.000000] Using ACPI (MADT) for SMP configuration information
119[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
120[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
121[ 0.000000] nr_irqs_gsi: 40
122[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
123[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
124[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
125[ 0.000000] PM: Registered nosave memory: [mem 0xbfed0000-0xbfffffff]
126[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff]
127[ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff]
128[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
129[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
130[ 0.000000] e820: [mem 0xc2a00000-0xefffffff] available for PCI devices
131[ 0.000000] Booting paravirtualized kernel on bare hardware
132[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
133[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88043b200000 s86080 r8192 d24512 u524288
134[ 0.000000] pcpu-alloc: s86080 r8192 d24512 u524288 alloc=1*2097152
135[ 0.000000] pcpu-alloc: [0] 0 1 2 3
136[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4116709
137[ 0.000000] Policy zone: Normal
138[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet
139[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
140[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
141[ 0.000000] Checking aperture...
142[ 0.000000] No AGP bridge found
143[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
144[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
145[ 0.000000] Memory: 16371948K/16695740K available (4957K kernel code, 747K rwdata, 1724K rodata, 1008K init, 960K bss, 323792K reserved)
146[ 0.000000] Hierarchical RCU implementation.
147[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
148[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
149[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
150[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
151[ 0.000000] Console: colour dummy device 80x25
152[ 0.000000] console [tty0] enabled
153[ 0.000000] hpet clockevent registered
154[ 0.000000] tsc: Fast TSC calibration using PIT
155[ 0.000000] tsc: Detected 2491.824 MHz processor
156[ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4983.64 BogoMIPS (lpj=9967296)
157[ 0.000032] pid_max: default: 32768 minimum: 301
158[ 0.000038] ACPI: Core revision 20131218
159[ 0.001976] ACPI: All ACPI Tables successfully acquired
160[ 0.002087] Security Framework initialized
161[ 0.002094] AppArmor: AppArmor disabled by boot time parameter
162[ 0.002095] Yama: disabled by default; enable with sysctl kernel.yama.*
163[ 0.002975] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
164[ 0.006118] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
165[ 0.007478] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
166[ 0.007495] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
167[ 0.007696] Initializing cgroup subsys memory
168[ 0.007700] Initializing cgroup subsys devices
169[ 0.007701] Initializing cgroup subsys freezer
170[ 0.007703] Initializing cgroup subsys net_cls
171[ 0.007704] Initializing cgroup subsys blkio
172[ 0.007705] Initializing cgroup subsys perf_event
173[ 0.007726] CPU: Physical Processor ID: 0
174[ 0.007727] CPU: Processor Core ID: 0
175[ 0.007732] mce: CPU supports 7 MCE banks
176[ 0.007743] CPU0: Thermal monitoring enabled (TM1)
177[ 0.007751] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
178[ 0.007751] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
179[ 0.007751] tlb_flushall_shift: 6
180[ 0.007838] Freeing SMP alternatives memory: 20K (ffffffff819b8000 - ffffffff819bd000)
181[ 0.009657] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
182[ 0.049346] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07)
183[ 0.049354] TSC deadline timer enabled
184[ 0.049361] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
185[ 0.049368] ... version: 3
186[ 0.049369] ... bit width: 48
187[ 0.049370] ... generic registers: 4
188[ 0.049371] ... value mask: 0000ffffffffffff
189[ 0.049372] ... max period: 0000ffffffffffff
190[ 0.049373] ... fixed-purpose events: 3
191[ 0.049373] ... event mask: 000000070000000f
192[ 0.049841] x86: Booting SMP configuration:
193[ 0.049843] .... node #0, CPUs: #1
194[ 0.063045] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
195[ 0.063135] #2 #3
196[ 0.089523] x86: Booted up 1 node, 4 CPUs
197[ 0.089527] smpboot: Total of 4 processors activated (19934.59 BogoMIPS)
198[ 0.092566] devtmpfs: initialized
199[ 0.096410] pinctrl core: initialized pinctrl subsystem
200[ 0.096465] NET: Registered protocol family 16
201[ 0.096551] cpuidle: using governor ladder
202[ 0.096552] cpuidle: using governor menu
203[ 0.096578] ACPI: bus type PCI registered
204[ 0.096580] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
205[ 0.096654] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
206[ 0.096657] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
207[ 0.096735] PCI: Using configuration type 1 for base access
208[ 0.097671] bio: create slab <bio-0> at 0
209[ 0.097778] ACPI: Added _OSI(Module Device)
210[ 0.097779] ACPI: Added _OSI(Processor Device)
211[ 0.097780] ACPI: Added _OSI(3.0 _SCP Extensions)
212[ 0.097782] ACPI: Added _OSI(Processor Aggregator Device)
213[ 0.100424] ACPI: Interpreter enabled
214[ 0.100429] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
215[ 0.100433] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
216[ 0.100444] ACPI: (supports S0 S3 S4 S5)
217[ 0.100445] ACPI: Using IOAPIC for interrupt routing
218[ 0.100467] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
219[ 0.100562] ACPI: No dock devices found.
220[ 0.105604] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
221[ 0.105609] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
222[ 0.105653] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
223[ 0.105742] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
224[ 0.105888] PCI host bridge to bus 0000:00
225[ 0.105891] pci_bus 0000:00: root bus resource [bus 00-ff]
226[ 0.105892] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
227[ 0.105894] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
228[ 0.105896] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
229[ 0.105897] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
230[ 0.105900] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
231[ 0.105901] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
232[ 0.105903] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
233[ 0.105905] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
234[ 0.105906] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
235[ 0.105907] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
236[ 0.105909] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
237[ 0.105910] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
238[ 0.105912] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
239[ 0.105913] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
240[ 0.105915] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
241[ 0.105916] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
242[ 0.105918] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xfebfffff]
243[ 0.105919] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
244[ 0.105927] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
245[ 0.106006] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
246[ 0.106017] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
247[ 0.106023] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
248[ 0.106027] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f]
249[ 0.106122] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
250[ 0.106145] pci 0000:00:16.0: reg 0x10: [mem 0xe0626100-0xe062610f 64bit]
251[ 0.106221] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
252[ 0.106299] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
253[ 0.106317] pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff]
254[ 0.106326] pci 0000:00:19.0: reg 0x14: [mem 0xe0624000-0xe0624fff]
255[ 0.106335] pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f]
256[ 0.106398] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
257[ 0.106469] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
258[ 0.106491] pci 0000:00:1a.0: reg 0x10: [mem 0xe0625800-0xe0625bff]
259[ 0.106579] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
260[ 0.106615] pci 0000:00:1a.0: System wakeup disabled by ACPI
261[ 0.106660] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
262[ 0.106677] pci 0000:00:1b.0: reg 0x10: [mem 0xe0620000-0xe0623fff 64bit]
263[ 0.106751] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
264[ 0.106785] pci 0000:00:1b.0: System wakeup disabled by ACPI
265[ 0.106831] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
266[ 0.106950] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
267[ 0.107038] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
268[ 0.107170] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
269[ 0.107258] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
270[ 0.107379] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
271[ 0.107462] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
272[ 0.107591] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
273[ 0.107678] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
274[ 0.107700] pci 0000:00:1d.0: reg 0x10: [mem 0xe0625c00-0xe0625fff]
275[ 0.107789] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
276[ 0.107823] pci 0000:00:1d.0: System wakeup disabled by ACPI
277[ 0.107866] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
278[ 0.108033] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
279[ 0.108052] pci 0000:00:1f.2: reg 0x10: [io 0x1880-0x1887]
280[ 0.108061] pci 0000:00:1f.2: reg 0x14: [io 0x1890-0x1893]
281[ 0.108070] pci 0000:00:1f.2: reg 0x18: [io 0x1888-0x188f]
282[ 0.108079] pci 0000:00:1f.2: reg 0x1c: [io 0x1894-0x1897]
283[ 0.108088] pci 0000:00:1f.2: reg 0x20: [io 0x1860-0x187f]
284[ 0.108096] pci 0000:00:1f.2: reg 0x24: [mem 0xe0625000-0xe06257ff]
285[ 0.108145] pci 0000:00:1f.2: PME# supported from D3hot
286[ 0.108213] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
287[ 0.108229] pci 0000:00:1f.3: reg 0x10: [mem 0xe0626000-0xe06260ff 64bit]
288[ 0.108250] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
289[ 0.108405] pci 0000:00:1c.0: PCI bridge to [bus 01]
290[ 0.108663] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
291[ 0.108829] pci 0000:02:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit]
292[ 0.109600] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
293[ 0.117684] pci 0000:00:1c.1: PCI bridge to [bus 02]
294[ 0.117693] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
295[ 0.117787] pci 0000:00:1c.3: PCI bridge to [bus 03]
296[ 0.117926] pci 0000:04:00.0: [1180:e823] type 00 class 0x080501
297[ 0.117953] pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz.
298[ 0.117973] pci 0000:04:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
299[ 0.117974] pci 0000:04:00.0: MMC cards are now supported by standard SDHCI controller
300[ 0.118014] pci 0000:04:00.0: reg 0x10: [mem 0xe0500000-0xe05000ff]
301[ 0.118317] pci 0000:04:00.0: supports D1 D2
302[ 0.118318] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
303[ 0.118445] pci 0000:04:00.1: [1180:e232] type 00 class 0x088000
304[ 0.118484] pci 0000:04:00.1: reg 0x10: [mem 0xe0500100-0xe05001ff]
305[ 0.118768] pci 0000:04:00.1: supports D1 D2
306[ 0.118769] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
307[ 0.125586] pci 0000:00:1c.4: PCI bridge to [bus 04]
308[ 0.125601] pci 0000:00:1c.4: bridge window [mem 0xe0500000-0xe05fffff]
309[ 0.125773] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
310[ 0.125817] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
311[ 0.125859] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
312[ 0.125899] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
313[ 0.125941] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
314[ 0.125981] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
315[ 0.126021] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
316[ 0.126061] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
317[ 0.126463] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
318[ 0.126540] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
319[ 0.126543] vgaarb: loaded
320[ 0.126544] vgaarb: bridge control possible 0000:00:02.0
321[ 0.126580] PCI: Using ACPI for IRQ routing
322[ 0.128030] PCI: pci_cache_line_size set to 64 bytes
323[ 0.128150] e820: reserve RAM buffer [mem 0xbfed0000-0xbfffffff]
324[ 0.128152] e820: reserve RAM buffer [mem 0x43b600000-0x43bffffff]
325[ 0.128257] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
326[ 0.128261] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
327[ 0.131286] Switched to clocksource hpet
328[ 0.133005] pnp: PnP ACPI init
329[ 0.133020] ACPI: bus type PNP registered
330[ 0.133085] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
331[ 0.133087] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
332[ 0.133089] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
333[ 0.133090] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
334[ 0.133092] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
335[ 0.133094] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
336[ 0.133096] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
337[ 0.133098] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
338[ 0.133099] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
339[ 0.133101] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
340[ 0.133104] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
341[ 0.133576] pnp 00:01: [dma 4]
342[ 0.133601] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
343[ 0.133625] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
344[ 0.133709] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
345[ 0.133711] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
346[ 0.133746] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
347[ 0.133782] system 00:05: [io 0x0500-0x057f] could not be reserved
348[ 0.133784] system 00:05: [io 0x0480-0x04bf] has been reserved
349[ 0.133786] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
350[ 0.133810] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
351[ 0.133847] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
352[ 0.133879] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
353[ 0.133890] pnp: PnP ACPI: found 9 devices
354[ 0.133891] ACPI: bus type PNP unregistered
355[ 0.140362] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
356[ 0.140365] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
357[ 0.140367] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
358[ 0.140383] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
359[ 0.140385] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
360[ 0.140387] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
361[ 0.140394] pci 0000:00:1c.3: BAR 14: assigned [mem 0xc2a00000-0xc2bfffff]
362[ 0.140401] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc2c00000-0xc2dfffff 64bit pref]
363[ 0.140404] pci 0000:00:1c.3: BAR 13: assigned [io 0x2000-0x2fff]
364[ 0.140406] pci 0000:00:1c.0: PCI bridge to [bus 01]
365[ 0.140424] pci 0000:00:1c.1: PCI bridge to [bus 02]
366[ 0.140431] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
367[ 0.140443] pci 0000:00:1c.3: PCI bridge to [bus 03]
368[ 0.140446] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
369[ 0.140453] pci 0000:00:1c.3: bridge window [mem 0xc2a00000-0xc2bfffff]
370[ 0.140458] pci 0000:00:1c.3: bridge window [mem 0xc2c00000-0xc2dfffff 64bit pref]
371[ 0.140466] pci 0000:00:1c.4: PCI bridge to [bus 04]
372[ 0.140473] pci 0000:00:1c.4: bridge window [mem 0xe0500000-0xe05fffff]
373[ 0.140486] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
374[ 0.140487] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
375[ 0.140489] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
376[ 0.140490] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
377[ 0.140492] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
378[ 0.140493] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
379[ 0.140495] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
380[ 0.140496] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
381[ 0.140498] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
382[ 0.140499] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
383[ 0.140500] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
384[ 0.140502] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
385[ 0.140503] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
386[ 0.140505] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
387[ 0.140506] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
388[ 0.140508] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
389[ 0.140509] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xfebfffff]
390[ 0.140511] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
391[ 0.140512] pci_bus 0000:02: resource 1 [mem 0xe0400000-0xe04fffff]
392[ 0.140514] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
393[ 0.140516] pci_bus 0000:03: resource 1 [mem 0xc2a00000-0xc2bfffff]
394[ 0.140517] pci_bus 0000:03: resource 2 [mem 0xc2c00000-0xc2dfffff 64bit pref]
395[ 0.140519] pci_bus 0000:04: resource 1 [mem 0xe0500000-0xe05fffff]
396[ 0.140573] NET: Registered protocol family 2
397[ 0.140771] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
398[ 0.141015] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
399[ 0.141136] TCP: Hash tables configured (established 131072 bind 65536)
400[ 0.141159] TCP: reno registered
401[ 0.141177] UDP hash table entries: 8192 (order: 6, 262144 bytes)
402[ 0.141234] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
403[ 0.141342] NET: Registered protocol family 1
404[ 0.141355] pci 0000:00:02.0: Boot video device
405[ 0.141673] PCI: CLS 64 bytes, default 64
406[ 0.141718] Unpacking initramfs...
407[ 0.414270] Freeing initrd memory: 15972K (ffff8800360be000 - ffff880037057000)
408[ 0.414275] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
409[ 0.414277] software IO TLB [mem 0xbbed0000-0xbfed0000] (64MB) mapped at [ffff8800bbed0000-ffff8800bfecffff]
410[ 0.414475] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
411[ 0.414516] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
412[ 0.414523] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
413[ 0.414532] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
414[ 0.414540] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
415[ 0.414604] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
416[ 0.414846] futex hash table entries: 1024 (order: 4, 65536 bytes)
417[ 0.414898] audit: initializing netlink subsys (disabled)
418[ 0.414916] audit: type=2000 audit(1409419967.412:1): initialized
419[ 0.427467] HugeTLB registered 2 MB page size, pre-allocated 0 pages
420[ 0.427649] VFS: Disk quotas dquot_6.5.2
421[ 0.427670] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
422[ 0.427719] msgmni has been set to 32007
423[ 0.427933] alg: No test for stdrng (krng)
424[ 0.427957] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
425[ 0.427992] io scheduler noop registered
426[ 0.427993] io scheduler deadline registered
427[ 0.428011] io scheduler cfq registered (default)
428[ 0.428180] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
429[ 0.428353] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
430[ 0.428444] pcieport 0000:00:1c.3: enabling device (0104 -> 0107)
431[ 0.428480] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
432[ 0.428606] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
433[ 0.428725] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
434[ 0.428731] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
435[ 0.428754] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
436[ 0.428756] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
437[ 0.428761] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
438[ 0.428783] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
439[ 0.428788] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
440[ 0.428810] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
441[ 0.428812] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
442[ 0.428814] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
443[ 0.428819] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
444[ 0.428830] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
445[ 0.428874] pciehp 0000:00:1c.3:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
446[ 0.428906] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
447[ 0.428911] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
448[ 0.428956] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x408000 bytes, mapped to 0xffffc90005b80000
449[ 0.428958] simple-framebuffer simple-framebuffer.0: format=x8r8g8b8, mode=1376x768x32, linelength=5504
450[ 0.431307] Console: switching to colour frame buffer device 172x48
451[ 0.433588] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
452[ 0.433595] intel_idle: MWAIT substates: 0x21120
453[ 0.433596] intel_idle: v0.4 model 0x2A
454[ 0.433597] intel_idle: lapic_timer_reliable_states 0xffffffff
455[ 0.433764] GHES: HEST is not enabled!
456[ 0.433818] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
457[ 0.434220] Linux agpgart interface v0.103
458[ 0.434309] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
459[ 0.443492] serio: i8042 KBD port at 0x60,0x64 irq 1
460[ 0.443497] serio: i8042 AUX port at 0x60,0x64 irq 12
461[ 0.443618] mousedev: PS/2 mouse device common for all mice
462[ 0.443659] rtc_cmos 00:06: RTC can wake from S4
463[ 0.443784] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
464[ 0.443812] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
465[ 0.443820] Intel P-state driver initializing.
466[ 0.443829] Intel pstate controlling: cpu 0
467[ 0.443847] Intel pstate controlling: cpu 1
468[ 0.443864] Intel pstate controlling: cpu 2
469[ 0.443878] Intel pstate controlling: cpu 3
470[ 0.443899] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
471[ 0.443900] AMD IOMMUv2 functionality not available on this system
472[ 0.443986] TCP: cubic registered
473[ 0.444049] NET: Registered protocol family 10
474[ 0.444257] mip6: Mobile IPv6
475[ 0.444259] NET: Registered protocol family 17
476[ 0.444262] mpls_gso: MPLS GSO support
477[ 0.444517] registered taskstats version 1
478[ 0.445010] rtc_cmos 00:06: setting system clock to 2014-08-30 17:32:47 UTC (1409419967)
479[ 0.445060] PM: Hibernation image not present or could not be loaded.
480[ 0.445598] Freeing unused kernel memory: 1008K (ffffffff818bc000 - ffffffff819b8000)
481[ 0.445599] Write protecting the kernel read-only data: 8192k
482[ 0.452054] Freeing unused kernel memory: 1176K (ffff8800014da000 - ffff880001600000)
483[ 0.452924] Freeing unused kernel memory: 324K (ffff8800017af000 - ffff880001800000)
484[ 0.454998] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
485[ 0.510965] systemd-udevd[71]: starting version 208
486[ 0.511267] random: systemd-udevd urandom read with 1 bits of entropy available
487[ 0.522021] pps_core: LinuxPPS API ver. 1 registered
488[ 0.522024] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
489[ 0.522211] PTP clock support registered
490[ 0.522780] thermal LNXTHERM:00: registered as thermal_zone0
491[ 0.522784] ACPI: Thermal Zone [THM0] (57 C)
492[ 0.522816] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
493[ 0.522818] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
494[ 0.522898] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
495[ 0.522920] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
496[ 0.523589] thermal LNXTHERM:01: registered as thermal_zone1
497[ 0.523591] ACPI: Thermal Zone [THM1] (27 C)
498[ 0.525081] ACPI: bus type USB registered
499[ 0.525117] usbcore: registered new interface driver usbfs
500[ 0.525131] usbcore: registered new interface driver hub
501[ 0.525177] usbcore: registered new device driver usb
502[ 0.525538] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
503[ 0.525733] ehci-pci: EHCI PCI platform driver
504[ 0.526171] sdhci: Secure Digital Host Controller Interface driver
505[ 0.526174] sdhci: Copyright(c) Pierre Ossman
506[ 0.526364] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e823] (rev 4)
507[ 0.526663] mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
508[ 0.528451] SCSI subsystem initialized
509[ 0.529557] libata version 3.00 loaded.
510[ 0.724004] e1000e 0000:00:19.0 eth0: registered PHC clock
511[ 0.724015] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:71:a0:9c
512[ 0.724021] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
513[ 0.724066] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
514[ 0.724246] ehci-pci 0000:00:1a.0: EHCI Host Controller
515[ 0.724253] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
516[ 0.724277] ehci-pci 0000:00:1a.0: debug port 2
517[ 0.728194] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
518[ 0.728234] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0625800
519[ 0.739509] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
520[ 0.739652] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
521[ 0.739658] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
522[ 0.739662] usb usb1: Product: EHCI Host Controller
523[ 0.739666] usb usb1: Manufacturer: Linux 3.14-2-amd64 ehci_hcd
524[ 0.739670] usb usb1: SerialNumber: 0000:00:1a.0
525[ 0.740222] hub 1-0:1.0: USB hub found
526[ 0.740239] hub 1-0:1.0: 3 ports detected
527[ 0.740728] ehci-pci 0000:00:1d.0: EHCI Host Controller
528[ 0.740742] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
529[ 0.740770] ehci-pci 0000:00:1d.0: debug port 2
530[ 0.744703] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
531[ 0.744740] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0625c00
532[ 0.755518] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
533[ 0.755663] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
534[ 0.755669] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
535[ 0.755673] usb usb2: Product: EHCI Host Controller
536[ 0.755676] usb usb2: Manufacturer: Linux 3.14-2-amd64 ehci_hcd
537[ 0.755680] usb usb2: SerialNumber: 0000:00:1d.0
538[ 0.756142] hub 2-0:1.0: USB hub found
539[ 0.756159] hub 2-0:1.0: 3 ports detected
540[ 0.756481] ahci 0000:00:1f.2: version 3.0
541[ 0.756916] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
542[ 0.756968] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
543[ 0.771573] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
544[ 0.771586] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
545[ 0.772535] scsi0 : ahci
546[ 0.772654] scsi1 : ahci
547[ 0.772744] scsi2 : ahci
548[ 0.772836] scsi3 : ahci
549[ 0.772924] scsi4 : ahci
550[ 0.773011] scsi5 : ahci
551[ 0.773051] ata1: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625100 irq 45
552[ 0.773054] ata2: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625180 irq 45
553[ 0.773055] ata3: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625200 irq 45
554[ 0.773056] ata4: DUMMY
555[ 0.773057] ata5: DUMMY
556[ 0.773058] ata6: DUMMY
557[ 1.051593] usb 1-1: new high-speed USB device number 2 using ehci-pci
558[ 1.091588] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
559[ 1.092010] ata1.00: supports DRM functions and may not be fully accessible
560[ 1.092318] ata1.00: disabling queued TRIM support
561[ 1.092328] ata1.00: ATA-9: Crucial_CT960M500SSD1, MU02, max UDMA/133
562[ 1.092333] ata1.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
563[ 1.093350] ata1.00: supports DRM functions and may not be fully accessible
564[ 1.093635] ata1.00: disabling queued TRIM support
565[ 1.094265] ata1.00: configured for UDMA/133
566[ 1.094718] scsi 0:0:0:0: Direct-Access ATA Crucial_CT960M50 MU02 PQ: 0 ANSI: 5
567[ 1.184134] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
568[ 1.184143] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
569[ 1.184769] hub 1-1:1.0: USB hub found
570[ 1.184866] hub 1-1:1.0: 6 ports detected
571[ 1.295635] usb 2-1: new high-speed USB device number 2 using ehci-pci
572[ 1.411617] tsc: Refined TSC clocksource calibration: 2491.910 MHz
573[ 1.411632] ata2: SATA link down (SStatus 0 SControl 300)
574[ 1.428173] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
575[ 1.428182] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
576[ 1.428797] hub 2-1:1.0: USB hub found
577[ 1.428926] hub 2-1:1.0: 8 ports detected
578[ 1.499890] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
579[ 1.593080] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
580[ 1.593089] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
581[ 1.593094] usb 1-1.3: Product: Biometric Coprocessor
582[ 1.593097] usb 1-1.3: Manufacturer: UPEK
583[ 1.663901] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
584[ 1.739693] ata3: SATA link down (SStatus 0 SControl 300)
585[ 1.746446] sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
586[ 1.746460] sd 0:0:0:0: [sda] 4096-byte physical blocks
587[ 1.746595] sd 0:0:0:0: [sda] Write Protect is off
588[ 1.746603] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
589[ 1.746647] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
590[ 1.748800] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
591[ 1.749949] sd 0:0:0:0: [sda] Attached SCSI disk
592[ 1.750979] sd 0:0:0:0: Attached scsi generic sg0 type 0
593[ 1.760385] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
594[ 1.760393] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
595[ 1.760397] usb 1-1.4: Product: Broadcom Bluetooth Device
596[ 1.760400] usb 1-1.4: Manufacturer: Broadcom Corp
597[ 1.760403] usb 1-1.4: SerialNumber: EC55F9F085ED
598[ 1.816171] device-mapper: uevent: version 1.0.3
599[ 1.816267] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
600[ 1.831751] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
601[ 1.891592] raid6: sse2x1 6135 MB/s
602[ 1.930141] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
603[ 1.930151] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
604[ 1.930153] usb 1-1.6: Product: Integrated Camera
605[ 1.930154] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
606[ 1.959600] raid6: sse2x2 9359 MB/s
607[ 1.999773] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
608[ 2.027615] raid6: sse2x4 12268 MB/s
609[ 2.027617] raid6: using algorithm sse2x4 (12268 MB/s)
610[ 2.027618] raid6: using ssse3x2 recovery algorithm
611[ 2.027822] xor: automatically using best checksumming function:
612[ 2.067617] avx : 24514.000 MB/sec
613[ 2.071000] bio: create slab <bio-1> at 1
614[ 2.071145] Btrfs loaded
615[ 2.094033] usb 2-1.5: New USB device found, idVendor=056a, idProduct=0090
616[ 2.094036] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
617[ 2.094038] usb 2-1.5: Product: ISD-V4
618[ 2.094039] usb 2-1.5: Manufacturer: Tablet
619[ 2.095002] hidraw: raw HID events driver (C) Jiri Kosina
620[ 2.095347] usbcore: registered new interface driver usbhid
621[ 2.095349] usbhid: USB HID core driver
622[ 2.134516] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
623[ 2.136013] XFS (sda4): Mounting Filesystem
624[ 2.154115] XFS (sda4): Ending clean mount
625[ 2.234497] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
626[ 2.253248] systemd[1]: Inserted module 'autofs4'
627[ 2.253801] systemd[1]: Set hostname to <debian>.
628[ 2.411846] Switched to clocksource tsc
629[ 2.455807] systemd[1]: [/lib/systemd/system/lvm2-lvmetad.socket:9] Unknown lvalue 'RemoveOnStop' in section 'Socket'
630[ 2.507256] systemd[1]: Starting Syslog Socket.
631[ 2.507346] systemd[1]: Listening on Syslog Socket.
632[ 2.507373] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
633[ 2.507486] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
634[ 2.507509] systemd[1]: Starting Remote File Systems (Pre).
635[ 2.507530] systemd[1]: Reached target Remote File Systems (Pre).
636[ 2.507549] systemd[1]: Starting Delayed Shutdown Socket.
637[ 2.507588] systemd[1]: Listening on Delayed Shutdown Socket.
638[ 2.507605] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
639[ 2.507647] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
640[ 2.507673] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
641[ 2.507761] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
642[ 2.507819] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
643[ 2.507979] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
644[ 2.508005] systemd[1]: Starting Journal Socket.
645[ 2.508077] systemd[1]: Listening on Journal Socket.
646[ 2.508105] systemd[1]: Starting Syslog.
647[ 2.508123] systemd[1]: Reached target Syslog.
648[ 2.509393] systemd[1]: Starting Load Kernel Modules...
649[ 2.510363] systemd[1]: Mounting Debug File System...
650[ 2.512112] systemd[1]: Started Set Up Additional Binary Formats.
651[ 2.512192] systemd[1]: Mounting Huge Pages File System...
652[ 2.512919] systemd[1]: Mounting POSIX Message Queue File System...
653[ 2.514559] systemd[1]: Starting Create list of required static device nodes for the current kernel...
654[ 2.515406] systemd[1]: Starting Journal Service...
655[ 2.516350] systemd[1]: Started Journal Service.
656[ 2.526212] lp: driver loaded but no devices found
657[ 2.555287] ppdev: user-space parallel port driver
658[ 2.558565] fuse init (API version 7.22)
659[ 2.560728] loop: module loaded
660[ 2.577023] systemd-udevd[210]: starting version 208
661[ 2.666293] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0E:00/input/input2
662[ 2.666298] ACPI: Sleep Button [SLPB]
663[ 2.666344] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0D:00/input/input3
664[ 2.666543] ACPI: Lid Switch [LID]
665[ 2.666598] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
666[ 2.666601] ACPI: Power Button [PWRF]
667[ 2.666605] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
668[ 2.667137] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
669[ 2.674508] [drm] Initialized drm 1.1.0 20060810
670[ 2.680586] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
671[ 2.680705] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20131218/utaddress-258)
672[ 2.680711] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
673[ 2.680715] ACPI Warning: SystemIO range 0x00000000000004c0-0x00000000000004cf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20131218/utaddress-258)
674[ 2.680718] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
675[ 2.680719] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20131218/utaddress-258)
676[ 2.680723] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
677[ 2.680724] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20131218/utaddress-258)
678[ 2.680727] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
679[ 2.680728] lpc_ich: Resource conflict(s) found affecting gpio_ich
680[ 2.681739] Non-volatile memory driver v1.3
681[ 2.683835] systemd-udevd[261]: renamed network interface eth0 to eth1
682[ 2.693227] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
683[ 2.694894] cfg80211: Calling CRDA to update world regulatory domain
684[ 2.695101] input: PC Speaker as /devices/platform/pcspkr/input/input5
685[ 2.698883] Intel(R) Wireless WiFi driver for Linux, in-tree:
686[ 2.698887] Copyright(c) 2003- 2014 Intel Corporation
687[ 2.708126] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
688[ 2.714376] hda_codec: CX20590: BIOS auto-probing.
689[ 2.715913] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
690[ 2.716428] AVX version of gcm_enc/dec engaged.
691[ 2.723744] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
692[ 2.738168] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
693[ 2.741804] input: Wacom ISDv4 90 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input8
694[ 2.742115] alg: No test for crc32 (crc32-pclmul)
695[ 2.742546] usbcore: registered new interface driver wacom
696[ 2.743706] Bluetooth: Core ver 2.18
697[ 2.743722] NET: Registered protocol family 31
698[ 2.743723] Bluetooth: HCI device and connection manager initialized
699[ 2.743741] Bluetooth: HCI socket layer initialized
700[ 2.743744] Bluetooth: L2CAP socket layer initialized
701[ 2.743754] Bluetooth: SCO socket layer initialized
702[ 2.747889] media: Linux media interface: v0.10
703[ 2.750893] Linux video capture interface: v2.00
704[ 2.751175] usbcore: registered new interface driver btusb
705[ 2.754319] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
706[ 2.754450] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
707[ 2.756876] acpi device:07: registered as cooling_device4
708[ 2.756969] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
709[ 2.757004] thinkpad_acpi: ThinkPad ACPI Extras v0.25
710[ 2.757006] thinkpad_acpi: http://ibm-acpi.sf.net/
711[ 2.757007] thinkpad_acpi: ThinkPad BIOS CBET4000 4.0-6835-g8603513, EC 8ZHT24WW-3.20
712[ 2.757008] thinkpad_acpi: Lenovo ThinkPad X220 Tablet, model 4299Y48
713[ 2.757548] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
714[ 2.757994] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
715[ 2.757996] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
716[ 2.758588] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
717[ 2.768936] [drm] Memory usable by graphics device = 2048M
718[ 2.768942] checking generic (d0000000 408000) vs hw (d0000000 10000000)
719[ 2.768944] fb: conflicting fb hw usage inteldrmfb vs simple - removing generic driver
720[ 2.768968] Console: switching to colour dummy device 80x25
721[ 2.769533] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
722[ 2.769536] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
723[ 2.769546] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
724[ 2.769549] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
725[ 2.769631] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
726[ 2.769648] i915 0000:00:02.0: irq 49 for MSI/MSI-X
727[ 2.769656] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
728[ 2.769657] [drm] Driver supports precise vblank timestamp query.
729[ 2.769836] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
730[ 2.783508] ACPI: Battery Slot [BAT0] (battery present)
731[ 2.783632] ACPI: Battery Slot [BAT1] (battery absent)
732[ 2.784149] ACPI: AC Adapter [AC] (on-line)
733[ 2.785743] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
734[ 2.785914] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
735[ 2.786875] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input10
736[ 2.806290] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
737[ 2.809721] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
738[ 2.809855] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
739[ 2.810016] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
740[ 2.810152] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
741[ 2.810290] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
742[ 2.810362] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
743[ 2.810686] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
744[ 2.823872] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input18
745[ 2.823960] usbcore: registered new interface driver uvcvideo
746[ 2.823962] USB Video Class driver (1.1.1)
747[ 2.834909] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
748[ 2.839051] iTCO_vendor_support: vendor-support=0
749[ 2.839706] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
750[ 2.839740] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560)
751[ 2.840029] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
752[ 2.847030] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
753[ 2.850381] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
754[ 2.851646] FAT-fs (sda3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
755[ 2.860347] systemd-udevd[252]: renamed network interface wlan0 to wlan1
756[ 2.862865] cfg80211: World regulatory domain updated:
757[ 2.862869] cfg80211: DFS Master region: unset
758[ 2.862870] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
759[ 2.862873] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
760[ 2.862874] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
761[ 2.862876] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
762[ 2.862878] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
763[ 2.862879] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
764[ 2.862881] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
765[ 2.903784] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
766[ 2.921349] fbcon: inteldrmfb (fb0) is primary device
767[ 3.608146] Console: switching to colour frame buffer device 170x48
768[ 3.614434] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
769[ 3.614438] i915 0000:00:02.0: registered panic notifier
770[ 3.614482] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
771[ 3.796528] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800, board id: 1611, fw id: 1099905
772[ 3.796552] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
773[ 3.856454] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
774[ 4.162742] random: nonblocking pool is initialized
775[ 4.816473] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
776[ 8.071206] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
777[ 9.880791] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
778[ 10.191022] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input19
779[ 13.363770] NET: Registered protocol family 38
780[ 13.417202] bio: create slab <bio-2> at 2
781[ 13.472190] XFS (dm-0): Mounting Filesystem
782[ 13.497584] XFS (dm-0): Ending clean mount
783[ 13.505557] systemd-journald[185]: Received request to flush runtime journal from PID 1
784[ 13.870574] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
785[ 13.870578] Bluetooth: BNEP filters: protocol multicast
786[ 13.870586] Bluetooth: BNEP socket layer initialized
787[ 15.782141] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
788[ 15.886029] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
789[ 15.886216] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
790[ 15.895711] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
791[ 15.895851] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
792[ 16.161903] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
793[ 16.162057] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
794[ 16.238473] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
795[ 22.897897] wlan1: authenticate with 00:24:37:96:06:b0
796[ 22.901690] wlan1: send auth to 00:24:37:96:06:b0 (try 1/3)
797[ 22.903461] wlan1: authenticated
798[ 22.903585] iwlwifi 0000:02:00.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
799[ 22.903589] iwlwifi 0000:02:00.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
800[ 22.907314] wlan1: associate with 00:24:37:96:06:b0 (try 1/3)
801[ 22.910255] wlan1: RX AssocResp from 00:24:37:96:06:b0 (capab=0x451 status=0 aid=4)
802[ 22.914071] wlan1: associated
803[ 22.914122] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
804[ 29.116272] Bluetooth: RFCOMM TTY layer initialized
805[ 29.116284] Bluetooth: RFCOMM socket layer initialized
806[ 29.116290] Bluetooth: RFCOMM ver 1.11