Gitiles
Code Review Sign In
review.coreboot.org / board-status / f0c508b2f7394ec2ebaf42ed5f7a0bd316ff5e6b / . / asus / kfsn4-dre / 4.4-628-g6dfe25d / 2016-06-28T14_46_49Z / kernel_log.txt
blob: bbdca7d0bfe03ef28540132e98af3495454c5ae0 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Standf97c4542016-06-28 15:10:56 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 06/28/2016
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f0820-0x000f082f] mapped at [ffff8800000f0820]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
43[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
44[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F09F0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFAD8D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFAB280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150619)
63[ 0.000000] ACPI: FACS 0x00000000BFFAB240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFAD9D0 000EA6 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFAE880 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFAE8C0 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFAE990 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFAEAE0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFAEB10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFAEB50 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFAECA0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
84[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
85[ 0.000000] NUMA: Initialized distance table, cnt=2
86[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
87[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
88[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
89[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
90[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
91[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
92[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
93[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
94[ 0.000000] Zone ranges:
95[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
96[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
97[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
98[ 0.000000] Movable zone start for each node
99[ 0.000000] Early memory node ranges
100[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
101[ 0.000000] node 0: [mem 0x00100000-0xbff99fff]
102[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
103[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
104[ 0.000000] On node 0 totalpages: 1048376
105[ 0.000000] DMA zone: 56 pages used for memmap
106[ 0.000000] DMA zone: 21 pages reserved
107[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
108[ 0.000000] DMA32 zone: 10695 pages used for memmap
109[ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31
110[ 0.000000] Normal zone: 3584 pages used for memmap
111[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
112[ 0.000000] On node 1 totalpages: 262144
113[ 0.000000] Normal zone: 3584 pages used for memmap
114[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
115[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
116[ 0.000000] ACPI: Local APIC address 0xfee00000
117[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
118[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
119[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
120[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
121[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
125[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
126[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
127[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
128[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
133[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
134[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
135[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
136[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
137[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
138[ 0.000000] ACPI: IRQ9 used by override.
139[ 0.000000] ACPI: IRQ14 used by override.
140[ 0.000000] ACPI: IRQ15 used by override.
141[ 0.000000] Using ACPI (MADT) for SMP configuration information
142[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
143[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
144[ 0.000000] nr_irqs_gsi: 40
145[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
146[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
147[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
148[ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff]
149[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
150[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
151[ 0.000000] Booting paravirtualized kernel on bare hardware
152[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
153[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
154[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
155[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
156[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580
157[ 0.000000] Policy zone: Normal
158[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64
159[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
160[ 0.000000] AGP: Checking aperture...
161[ 0.000000] AGP: No AGP bridge found
162[ 0.000000] AGP: Node 0: aperture [bus addr 0xf5ea000000-0xf5ebffffff] (32MB)
163[ 0.000000] Aperture beyond 4GB. Ignoring.
164[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
165[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
166[ 0.000000] AGP: This costs you 64MB of RAM
167[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
168[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
169[ 0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved)
170[ 0.000000] Hierarchical RCU implementation.
171[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
172[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
173[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
174[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
175[ 0.000000] spurious 8259A interrupt: IRQ7.
176[ 0.000000] Console: colour VGA+ 80x25
177[ 0.000000] console [ttyS0] enabled
178[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
179[ 0.000000] hpet clockevent registered
180[ 0.000000] tsc: Fast TSC calibration using PIT
181[ 0.000000] tsc: Detected 1909.809 MHz processor
182[ 0.000157] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.61 BogoMIPS (lpj=7639236)
183[ 0.010795] pid_max: default: 32768 minimum: 301
184[ 0.015441] ACPI: Core revision 20140424
185[ 0.021794] ACPI: All ACPI Tables successfully acquired
186[ 0.027143] Security Framework initialized
187[ 0.031270] AppArmor: AppArmor disabled by boot time parameter
188[ 0.037115] Yama: disabled by default; enable with sysctl kernel.yama.*
189[ 0.044847] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
190[ 0.057961] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
191[ 0.067704] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
192[ 0.074610] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
193[ 0.082465] Initializing cgroup subsys memory
194[ 0.086838] Initializing cgroup subsys devices
195[ 0.091299] Initializing cgroup subsys freezer
196[ 0.095764] Initializing cgroup subsys net_cls
197[ 0.100219] Initializing cgroup subsys blkio
198[ 0.104507] Initializing cgroup subsys perf_event
199[ 0.109226] Initializing cgroup subsys net_prio
200[ 0.113812] tseg: 0000000000
201[ 0.113824] CPU: Physical Processor ID: 0
202[ 0.117844] CPU: Processor Core ID: 0
203[ 0.121516] mce: CPU supports 6 MCE banks
204[ 0.125544] LVT offset 0 assigned for vector 0xf9
205[ 0.130273] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
206Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
207tlb_flushall_shift: 6
208[ 0.145612] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
209[ 0.154621] ftrace: allocating 21614 entries in 85 pages
210[ 0.169934] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
211[ 0.215457] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
212[ 0.332512] Performance Events: AMD PMU driver.
213[ 0.337081] ... version: 0
214[ 0.341094] ... bit width: 48
215[ 0.345191] ... generic registers: 4
216[ 0.349202] ... value mask: 0000ffffffffffff
217[ 0.354503] ... max period: 00007fffffffffff
218[ 0.359824] ... fixed-purpose events: 0
219[ 0.363852] ... event mask: 000000000000000f
220[ 0.371709] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
221[ 0.379909] x86: Booting SMP configuration:
222[ 0.384101] .... node #0, CPUs: #1 #2 #3
223[ 0.428469] .... node #1, CPUs: #4 #5 #6 #7
224[ 0.581205] x86: Booted up 2 nodes, 8 CPUs
225[ 0.585506] smpboot: Total of 8 processors activated (30557.69 BogoMIPS)
226[ 0.597982] devtmpfs: initialized
227[ 0.609260] pinctrl core: initialized pinctrl subsystem
228[ 0.614648] NET: Registered protocol family 16
229[ 0.619308] cpuidle: using governor ladder
230[ 0.623411] cpuidle: using governor menu
231[ 0.627350] node 0 link 1: io port [1000, 3fff]
232[ 0.627354] TOM: 00000000c0000000 aka 3072M
233[ 0.631546] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
234[ 0.631550] node 0 link 1: mmio [fc000000, fc3fffff]
235[ 0.631553] node 0 link 1: mmio [f8000000, fbffffff]
236[ 0.631556] TOM2: 0000000180000000 aka 6144M
237[ 0.635833] bus: [bus 00-05] on node 0 link 1
238[ 0.635835] bus: 00 [io 0x0000-0xffff]
239[ 0.635837] bus: 00 [mem 0xd0000000-0xffffffff]
240[ 0.635838] bus: 00 [mem 0x180000000-0xfcffffffff]
241[ 0.635947] ACPI: bus type PCI registered
242[ 0.639967] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
243[ 0.646580] PCI: Using configuration type 1 for base access
244[ 0.652155] PCI: Using configuration type 1 for extended access
245[ 0.669321] ACPI: Added _OSI(Module Device)
246[ 0.673515] ACPI: Added _OSI(Processor Device)
247[ 0.677965] ACPI: Added _OSI(3.0 _SCP Extensions)
248[ 0.682676] ACPI: Added _OSI(Processor Aggregator Device)
249[ 0.691662] ACPI: Interpreter enabled
250[ 0.695348] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
251[ 0.704614] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
252[ 0.713886] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
253[ 0.723155] ACPI: (supports S0 S1 S5)
254[ 0.726827] ACPI: Using IOAPIC for interrupt routing
255[ 0.731836] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
256[ 0.760185] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
257[ 0.766375] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
258[ 0.774585] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
259[ 0.814232] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
260[ 0.824233] PCI host bridge to bus 0000:00
261[ 0.828341] pci_bus 0000:00: root bus resource [bus 00-05]
262[ 0.833833] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
263[ 0.840018] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
264[ 0.846897] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
265[ 0.853767] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
266[ 0.860639] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
267[ 0.866836] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
268[ 0.867045] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
269[ 0.867052] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
270[ 0.867190] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
271[ 0.867198] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
272[ 0.867224] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
273[ 0.867243] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
274[ 0.867291] pci 0000:00:01.1: PME# supported from D3hot D3cold
275[ 0.867389] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
276[ 0.867397] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
277[ 0.867471] pci 0000:00:02.0: supports D1 D2
278[ 0.867490] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
279[ 0.867550] pci 0000:00:02.0: System wakeup disabled by ACPI
280[ 0.873272] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
281[ 0.873281] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
282[ 0.873338] pci 0000:00:02.1: supports D1 D2
283[ 0.873341] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
284[ 0.873386] pci 0000:00:02.1: System wakeup disabled by ACPI
285[ 0.879115] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
286[ 0.879144] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
287[ 0.879156] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
288[ 0.886293] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
289[ 0.892824] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
290[ 0.899963] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
291[ 0.906590] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
292[ 0.906598] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
293[ 0.906603] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
294[ 0.906608] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
295[ 0.906612] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
296[ 0.906617] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
297[ 0.906622] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
298[ 0.906758] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
299[ 0.906768] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
300[ 0.906773] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
301[ 0.906778] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
302[ 0.906782] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
303[ 0.906787] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
304[ 0.906792] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
305[ 0.906918] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
306[ 0.907002] pci 0000:00:09.0: System wakeup disabled by ACPI
307[ 0.912720] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
308[ 0.912770] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
309[ 0.912817] pci 0000:00:0b.0: System wakeup disabled by ACPI
310[ 0.918533] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
311[ 0.918588] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
312[ 0.918634] pci 0000:00:0c.0: System wakeup disabled by ACPI
313[ 0.924358] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
314[ 0.924397] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
315[ 0.924453] pci 0000:00:0d.0: System wakeup disabled by ACPI
316[ 0.930169] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
317[ 0.930208] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
318[ 0.930281] pci 0000:00:0e.0: System wakeup disabled by ACPI
319[ 0.936026] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
320[ 0.936153] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
321[ 0.936278] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
322[ 0.936416] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
323[ 0.936551] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
324[ 0.936668] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
325[ 0.936817] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
326[ 0.936908] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
327[ 0.937034] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
328[ 0.937177] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
329[ 0.937363] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
330[ 0.937389] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
331[ 0.937399] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
332[ 0.937409] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
333[ 0.937453] pci 0000:01:04.0: supports D1 D2
334[ 0.937562] pci 0000:00:09.0: PCI bridge to [bus 01]
335[ 0.942538] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
336[ 0.942541] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
337[ 0.942545] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
338[ 0.942649] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
339[ 0.942712] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
340[ 0.942756] pci 0000:02:00.0: reg 0x30: [mem 0x69c00000-0x69c0ffff pref]
341[ 0.942833] pci 0000:02:00.0: PME# supported from D3hot D3cold
342[ 0.942952] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
343[ 0.952956] pci 0000:00:0b.0: PCI bridge to [bus 02]
344[ 0.957925] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
345[ 0.958022] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.958064] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
347[ 0.958170] pci 0000:03:00.0: PME# supported from D3hot D3cold
348[ 0.958260] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
349[ 0.968263] pci 0000:00:0c.0: PCI bridge to [bus 03]
350[ 0.973233] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
351[ 0.973309] pci 0000:00:0d.0: PCI bridge to [bus 04]
352[ 0.978356] pci 0000:00:0e.0: PCI bridge to [bus 05]
353[ 0.983342] pci_bus 0000:00: on NUMA node 0
354[ 0.983439] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
355[ 0.989586] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
356[ 0.995723] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
357[ 1.003031] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
358[ 1.010347] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
359[ 1.017644] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
360[ 1.024943] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
361[ 1.031063] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
362[ 1.037203] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
363[ 1.044498] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
364[ 1.051785] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
365[ 1.059077] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
366[ 1.065208] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
367[ 1.071340] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
368[ 1.078659] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
369[ 1.085960] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
370[ 1.093248] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
371[ 1.101764] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
372[ 1.108222] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
373[ 1.114690] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
374[ 1.121144] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
375[ 1.127844] ACPI: Enabled 1 GPEs in block 00 to 1F
376[ 1.132962] vgaarb: setting as boot device: PCI:0000:01:04.0
377[ 1.138629] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
378[ 1.146723] vgaarb: loaded
379[ 1.149442] vgaarb: bridge control possible 0000:01:04.0
380[ 1.154929] PCI: Using ACPI for IRQ routing
381[ 1.159124] PCI: pci_cache_line_size set to 64 bytes
382[ 1.159180] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
383[ 1.159184] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff]
384[ 1.159491] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
385[ 1.166546] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
386[ 1.171612] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
387[ 1.180307] Switched to clocksource hpet
388[ 1.195965] pnp: PnP ACPI init
389[ 1.199073] ACPI: bus type PNP registered
390[ 1.203605] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
391[ 1.203694] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
392[ 1.203776] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
393[ 1.203873] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
394[ 1.203910] pnp 00:04: [dma 2]
395[ 1.203958] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
396[ 1.203980] pnp: PnP ACPI: found 5 devices
397[ 1.208092] ACPI: bus type PNP unregistered
398[ 1.220139] pci 0000:02:00.0: can't claim BAR 6 [mem 0x69c00000-0x69c0ffff pref]: no compatible bridge window
399[ 1.230090] pci 0000:00:09.0: PCI bridge to [bus 01]
400[ 1.235059] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
401[ 1.241160] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
402[ 1.247950] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
403[ 1.255187] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
404[ 1.262411] pci 0000:00:0b.0: PCI bridge to [bus 02]
405[ 1.267382] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
406[ 1.274178] pci 0000:00:0c.0: PCI bridge to [bus 03]
407[ 1.279149] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
408[ 1.285944] pci 0000:00:0d.0: PCI bridge to [bus 04]
409[ 1.290919] pci 0000:00:0e.0: PCI bridge to [bus 05]
410[ 1.295901] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
411[ 1.295904] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
412[ 1.295907] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
413[ 1.295909] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
414[ 1.295912] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
415[ 1.295915] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
416[ 1.295918] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
417[ 1.295920] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
418[ 1.295923] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
419[ 1.295926] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
420[ 1.296071] NET: Registered protocol family 2
421[ 1.300976] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
422[ 1.308671] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
423[ 1.316010] TCP: Hash tables configured (established 65536 bind 65536)
424[ 1.322614] TCP: reno registered
425[ 1.325874] UDP hash table entries: 4096 (order: 5, 131072 bytes)
426[ 1.332079] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
427[ 1.338862] NET: Registered protocol family 1
428[ 1.343613] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
429[ 1.349705] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
430[ 1.355614] pci 0000:00:00.0: Found enabled HT MSI Mapping
431[ 1.361140] pci 0000:00:00.0: Found enabled HT MSI Mapping
432[ 1.366663] pci 0000:00:0b.0: Found disabled HT MSI Mapping
433[ 1.372246] pci 0000:00:00.0: Found enabled HT MSI Mapping
434[ 1.377793] pci 0000:00:00.0: Found enabled HT MSI Mapping
435[ 1.383306] pci 0000:00:0c.0: Found disabled HT MSI Mapping
436[ 1.388894] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.394444] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.399950] pci 0000:00:0d.0: Found disabled HT MSI Mapping
439[ 1.405535] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.411080] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.416594] pci 0000:00:0e.0: Found disabled HT MSI Mapping
442[ 1.422181] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.427701] pci 0000:01:04.0: Video device with shadowed ROM
444[ 1.427710] PCI: CLS 64 bytes, default 64
445[ 1.427819] Unpacking initramfs...
446[ 1.811513] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
447[ 1.819532] PCI-DMA: Disabling AGP.
448[ 1.824646] PCI-DMA: aperture base @ b4000000 size 65536 KB
449[ 1.830229] PCI-DMA: using GART IOMMU.
450[ 1.833989] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
451[ 1.846303] platform rtc_cmos: registered platform RTC device (no PNP device found)
452[ 1.854471] microcode: CPU0: patch_level=0x01000084
453[ 1.859366] microcode: CPU1: patch_level=0x01000084
454[ 1.864262] microcode: CPU2: patch_level=0x01000084
455[ 1.869163] microcode: CPU3: patch_level=0x01000084
456[ 1.874070] microcode: CPU4: patch_level=0x01000084
457[ 1.878968] microcode: CPU5: patch_level=0x01000084
458[ 1.883868] microcode: CPU6: patch_level=0x01000084
459[ 1.888765] microcode: CPU7: patch_level=0x01000084
460[ 1.893760] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
461[ 1.902559] LVT offset 1 assigned for vector 0x400
462[ 1.907373] IBS: LVT offset 1 assigned
463[ 1.911160] perf: AMD IBS detected (0x00000007)
464[ 1.916323] futex hash table entries: 2048 (order: 5, 131072 bytes)
465[ 1.922715] audit: initializing netlink subsys (disabled)
466[ 1.928139] audit: type=2000 audit(1467126469.664:1): initialized
467[ 1.935007] HugeTLB registered 2 MB page size, pre-allocated 0 pages
468[ 1.941412] zbud: loaded
469[ 1.944323] VFS: Disk quotas dquot_6.5.2
470[ 1.948291] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
471[ 1.954828] msgmni has been set to 9945
472[ 1.959218] alg: No test for stdrng (krng)
473[ 1.963377] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
474[ 1.970888] io scheduler noop registered
475[ 1.974829] io scheduler deadline registered
476[ 1.979184] io scheduler cfq registered (default)
477[ 1.984120] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
478[ 1.984246] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
479[ 1.984359] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
480[ 1.984498] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
481[ 1.984649] aer 0000:00:0b.0:pcie02: service driver aer loaded
482[ 1.984674] aer 0000:00:0c.0:pcie02: service driver aer loaded
483[ 1.984697] aer 0000:00:0d.0:pcie02: service driver aer loaded
484[ 1.984718] aer 0000:00:0e.0:pcie02: service driver aer loaded
485[ 1.984741] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
486[ 1.991715] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
487[ 1.998251] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
488[ 1.998261] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
489[ 2.005223] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
490[ 2.011757] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
491[ 2.011767] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
492[ 2.018730] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
493[ 2.018739] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
494[ 2.025704] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
495[ 2.025737] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
496[ 2.031351] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
497[ 2.038063] GHES: HEST is not enabled!
498[ 2.041950] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
499[ 2.068553] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
500[ 2.096242] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
501[ 2.104174] Linux agpgart interface v0.103
502[ 2.108487] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
503[ 2.118840] serio: i8042 KBD port at 0x60,0x64 irq 1
504[ 2.123891] serio: i8042 AUX port at 0x60,0x64 irq 12
505[ 2.129185] mousedev: PS/2 mouse device common for all mice
506[ 2.134865] rtc_cmos rtc_cmos: RTC can wake from S4
507[ 2.140010] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
508[ 2.146413] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
509[ 2.154277] ledtrig-cpu: registered to indicate activity on CPUs
510[ 2.160471] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
511[ 2.166915] AMD IOMMUv2 functionality not available on this system
512[ 2.173247] TCP: cubic registered
513[ 2.176725] NET: Registered protocol family 10
514[ 2.181625] mip6: Mobile IPv6
515[ 2.184618] NET: Registered protocol family 17
516[ 2.185099] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
517[ 2.197682] mpls_gso: MPLS GSO support
518[ 2.202295] registered taskstats version 1
519[ 2.207172] rtc_cmos rtc_cmos: setting system clock to 2016-06-28 15:07:51 UTC (1467126471)
520[ 2.215594] PM: Hibernation image not present or could not be loaded.
521[ 2.217417] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
522[ 2.225258] Write protecting the kernel read-only data: 8192k
523[ 2.234493] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
524[ 2.243079] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
525[ 2.277123] systemd-udevd[98]: starting version 215
526[ 2.282909] random: systemd-udevd urandom read with 3 bits of entropy available
527[ 2.314370] ACPI: bus type USB registered
528[ 2.318642] usbcore: registered new interface driver usbfs
529[ 2.324230] usbcore: registered new interface driver hub
530[ 2.329790] usbcore: registered new device driver usb
531[ 2.329902] pps_core: LinuxPPS API ver. 1 registered
532[ 2.329904] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
533[ 2.329908] SCSI subsystem initialized
534[ 2.331974] FDC 0 is a post-1991 82077
535[ 2.357332] PTP clock support registered
536[ 2.361637] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
537[ 2.368877] tg3.c:v3.137 (May 11, 2014)
538[ 2.369120] libata version 3.00 loaded.
539[ 2.372791] tg3 0000:02:00.0: enabling device (0004 -> 0006)
540[ 2.378765] ehci-pci: EHCI PCI platform driver
541[ 2.378777] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
542[ 2.389419] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
543[ 2.389504] ehci-pci 0000:00:02.1: EHCI Host Controller
544[ 2.389522] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
545[ 2.389544] ehci-pci 0000:00:02.1: debug port 1
546[ 2.389622] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
547[ 2.389663] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
548[ 2.399901] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
549[ 2.399991] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
550[ 2.399993] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
551[ 2.399994] usb usb1: Product: EHCI Host Controller
552[ 2.399996] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
553[ 2.399997] usb usb1: SerialNumber: 0000:00:02.1
554[ 2.400344] hub 1-0:1.0: USB hub found
555[ 2.400355] hub 1-0:1.0: 10 ports detected
556[ 2.400737] pata_amd 0000:00:06.0: version 0.4.1
557[ 2.401400] scsi0 : pata_amd
558[ 2.464937] scsi1 : pata_amd
559[ 2.468158] ohci-pci: OHCI PCI platform driver
560[ 2.468186] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
561[ 2.468189] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
562[ 2.468294] sata_nv 0000:00:07.0: version 3.5
563[ 2.468560] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
564[ 2.469136] scsi2 : sata_nv
565[ 2.469399] scsi3 : sata_nv
566[ 2.469540] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
567[ 2.469544] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
568[ 2.469804] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
569[ 2.470325] scsi4 : sata_nv
570[ 2.470494] scsi5 : sata_nv
571[ 2.470563] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
572[ 2.470565] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
573[ 2.537997] ohci-pci 0000:00:02.0: OHCI PCI host controller
574[ 2.543666] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
575[ 2.551179] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
576[ 2.563035] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
577[ 2.573298] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
578[ 2.583039] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
579[ 2.590870] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
580[ 2.597691] tg3 0000:03:00.0: enabling device (0004 -> 0006)
581[ 2.603503] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
582[ 2.613895] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
583[ 2.620683] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
584[ 2.627911] usb usb2: Product: OHCI PCI host controller
585[ 2.633142] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
586[ 2.639240] usb usb2: SerialNumber: 0000:00:02.0
587[ 2.644087] hub 2-0:1.0: USB hub found
588[ 2.647846] hub 2-0:1.0: 10 ports detected
589[ 2.692254] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
590[ 2.702518] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
591[ 2.712257] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
592[ 2.720088] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
593[ 2.779781] ata3: SATA link down (SStatus 0 SControl 300)
594[ 2.779786] ata5: SATA link down (SStatus 0 SControl 300)
595[ 2.843749] tsc: Refined TSC clocksource calibration: 1909.787 MHz
596[ 3.111654] ata4: SATA link down (SStatus 0 SControl 300)
597[ 3.427540] ata6: SATA link down (SStatus 0 SControl 300)
598[ 3.453165] FS-Cache: Loaded
599[ 3.461042] RPC: Registered named UNIX socket transport module.
600[ 3.468154] RPC: Registered udp transport module.
601[ 3.474227] RPC: Registered tcp transport module.
602[ 3.480319] RPC: Registered tcp NFSv4.1 backchannel transport module.
603[ 3.493842] FS-Cache: Netfs 'nfs' registered for caching
604[ 3.511462] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
605[ 3.559617] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
606[ 3.847500] Switched to clocksource tsc
607[ 6.708322] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
608[ 6.714938] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
609[ 6.721831] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
610[ 7.709887] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
611[ 7.723930] systemd[1]: Detected architecture 'x86-64'.
612[ 7.772374] systemd[1]: Inserted module 'autofs4'
613[ 7.778378] systemd[1]: Set hostname to <cb-test-tgt>.
614[ 7.936877] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
615[ 7.949607] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
616[ 7.965021] systemd[1]: Expecting device dev-ttyS0.device...
617[ 7.978111] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
618[ 7.985899] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
619[ 7.993508] systemd[1]: Starting Remote File Systems (Pre).
620[ 8.010028] systemd[1]: Reached target Remote File Systems (Pre).
621[ 8.016166] systemd[1]: Starting Encrypted Volumes.
622[ 8.030000] systemd[1]: Reached target Encrypted Volumes.
623[ 8.035472] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
624[ 8.057989] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
625[ 8.067415] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
626[ 8.075474] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
627[ 8.083410] systemd[1]: Starting Paths.
628[ 8.097979] systemd[1]: Reached target Paths.
629[ 8.102373] systemd[1]: Starting Swap.
630[ 8.113971] systemd[1]: Reached target Swap.
631[ 8.118270] systemd[1]: Starting Root Slice.
632[ 8.129964] systemd[1]: Created slice Root Slice.
633[ 8.134703] systemd[1]: Starting User and Session Slice.
634[ 8.149958] systemd[1]: Created slice User and Session Slice.
635[ 8.155727] systemd[1]: Starting Delayed Shutdown Socket.
636[ 8.169948] systemd[1]: Listening on Delayed Shutdown Socket.
637[ 8.175722] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
638[ 8.193958] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
639[ 8.200945] systemd[1]: Starting Journal Socket (/dev/log).
640[ 8.217930] systemd[1]: Listening on Journal Socket (/dev/log).
641[ 8.223886] systemd[1]: Starting udev Kernel Socket.
642[ 8.237940] systemd[1]: Listening on udev Kernel Socket.
643[ 8.243290] systemd[1]: Starting udev Control Socket.
644[ 8.257917] systemd[1]: Listening on udev Control Socket.
645[ 8.263348] systemd[1]: Starting Journal Socket.
646[ 8.277924] systemd[1]: Listening on Journal Socket.
647[ 8.282953] systemd[1]: Starting System Slice.
648[ 8.297898] systemd[1]: Created slice System Slice.
649[ 8.302811] systemd[1]: Starting system-getty.slice.
650[ 8.317909] systemd[1]: Created slice system-getty.slice.
651[ 8.323332] systemd[1]: Starting system-serial\x2dgetty.slice.
652[ 8.337971] systemd[1]: Created slice system-serial\x2dgetty.slice.
653[ 8.344352] systemd[1]: Starting Increase datagram queue length...
654[ 8.363474] systemd[1]: Starting udev Coldplug all Devices...
655[ 8.399618] systemd[1]: Starting Load Kernel Modules...
656[ 8.417065] systemd[1]: Started Set Up Additional Binary Formats.
657[ 8.423419] systemd[1]: Mounting Debug File System...
658[ 8.439404] systemd[1]: Starting Create list of required static device nodes for the current kernel...
659[ 8.462933] systemd[1]: Mounting POSIX Message Queue File System...
660[ 8.478676] systemd[1]: Mounting Huge Pages File System...
661[ 8.494903] systemd[1]: Starting Slices.
662[ 8.509903] systemd[1]: Reached target Slices.
663[ 8.514455] systemd[1]: Starting Remount Root and Kernel File Systems...
664[ 8.545890] systemd[1]: Mounted Huge Pages File System.
665[ 8.561806] systemd[1]: Mounted POSIX Message Queue File System.
666[ 8.577851] systemd[1]: Mounted Debug File System.
667[ 8.593836] systemd[1]: Started Increase datagram queue length.
668[ 8.609836] systemd[1]: Started Load Kernel Modules.
669[ 8.629888] systemd[1]: Started Create list of required static device nodes for the current kernel.
670[ 8.653852] systemd[1]: Started Remount Root and Kernel File Systems.
671[ 8.669815] systemd[1]: Started udev Coldplug all Devices.
672[ 8.715874] systemd[1]: Started Various fixups to make systemd work better on Debian.
673[ 8.723749] systemd[1]: Starting Load/Save Random Seed...
674[ 8.739518] systemd[1]: Starting Create Static Device Nodes in /dev...
675[ 8.763270] systemd[1]: Starting Apply Kernel Variables...
676[ 8.780145] systemd[1]: Mounted Configuration File System.
677[ 8.786066] systemd[1]: Mounted FUSE Control File System.
678[ 8.791693] systemd[1]: Starting Syslog Socket.
679[ 8.805826] systemd[1]: Listening on Syslog Socket.
680[ 8.810811] systemd[1]: Starting Sockets.
681[ 8.825776] systemd[1]: Reached target Sockets.
682[ 8.830375] systemd[1]: Starting Journal Service...
683[ 8.857824] systemd[1]: Started Journal Service.
684[ 8.934500] systemd-udevd[212]: starting version 215
685[ 9.056977] systemd-journald[211]: Received request to flush runtime journal from PID 1
686[ 9.080632] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
687[ 9.080640] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
688[ 9.080711] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
689[ 9.105689] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
690[ 9.109594] ACPI: Power Button [PWRB]
691[ 9.109731] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
692[ 9.109733] ACPI: Power Button [PWRF]
693[ 9.131597] EDAC MC: Ver: 3.0.0
694[ 9.136052] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
695[ 9.142187] input: PC Speaker as /devices/platform/pcspkr/input/input4
696[ 9.143315] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
697[ 9.155144] acpi-cpufreq: overriding BIOS provided _PSD data
698[ 9.168026] MCE: In-kernel MCE decoding enabled.
699[ 9.174851] kvm: Nested Virtualization enabled
700[ 9.179350] kvm: Nested Paging enabled
701[ 9.183798] AMD64 EDAC driver v3.4.0
702[ 9.187541] EDAC amd64: DRAM ECC enabled.
703[ 9.191582] EDAC amd64: F10h detected (node 0).
704[ 9.196143] EDAC MC: DCT0 chip selects:
705[ 9.196146] EDAC amd64: MC: 0: 0MB 1: 0MB
706[ 9.200852] EDAC amd64: MC: 2: 0MB 3: 0MB
707[ 9.205556] EDAC amd64: MC: 4: 0MB 5: 0MB
708[ 9.210260] EDAC amd64: MC: 6: 1024MB 7: 1024MB
709[ 9.214977] EDAC MC: DCT1 chip selects:
710[ 9.214978] EDAC amd64: MC: 0: 0MB 1: 0MB
711[ 9.214979] EDAC amd64: MC: 2: 0MB 3: 0MB
712[ 9.214979] EDAC amd64: MC: 4: 0MB 5: 0MB
713[ 9.214980] EDAC amd64: MC: 6: 1024MB 7: 1024MB
714[ 9.214981] EDAC amd64: using x4 syndromes.
715[ 9.214982] EDAC amd64: MCT channel count: 2
716[ 9.215031] EDAC amd64: CS6: Registered DDR2 RAM
717[ 9.215031] EDAC amd64: CS7: Registered DDR2 RAM
718[ 9.215290] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
719[ 9.215351] EDAC amd64: DRAM ECC enabled.
720[ 9.215366] EDAC amd64: F10h detected (node 1).
721[ 9.215400] EDAC MC: DCT0 chip selects:
722[ 9.215402] EDAC amd64: MC: 0: 1024MB 1: 0MB
723[ 9.215403] EDAC amd64: MC: 2: 0MB 3: 0MB
724[ 9.215404] EDAC amd64: MC: 4: 0MB 5: 0MB
725[ 9.215404] EDAC amd64: MC: 6: 0MB 7: 0MB
726[ 9.215405] EDAC MC: DCT1 chip selects:
727[ 9.215406] EDAC amd64: MC: 0: 0MB 1: 0MB
728[ 9.215407] EDAC amd64: MC: 2: 0MB 3: 0MB
729[ 9.215408] EDAC amd64: MC: 4: 0MB 5: 0MB
730[ 9.215408] EDAC amd64: MC: 6: 0MB 7: 0MB
731[ 9.215409] EDAC amd64: using x4 syndromes.
732[ 9.215410] EDAC amd64: MCT channel count: 1
733[ 9.215452] EDAC amd64: CS0: Registered DDR2 RAM
734[ 9.215632] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
735[ 9.215789] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
736[ 9.427490] random: nonblocking pool is initialized
737[ 39.628966] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****