Gitiles
Code Review Sign In
review.coreboot.org / board-status / f0c508b2f7394ec2ebaf42ed5f7a0bd316ff5e6b / . / asus / kfsn4-dre / 4.2-553-gbf3dbaf / 2015-12-09T15:19:28Z / kernel_log.txt
blob: a0ef821fd8e6d20cd918d3d95d81967e3aa0e118 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Standdb53cdb2015-12-09 16:11:05 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.2-553-gbf3dbaf-dirty 12/09/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1ae0-0x000f1aef] mapped at [ffff8800000f1ae0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1CB0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150619)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000EA6 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7880 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB78C0 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7990 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7AE0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7B10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B50 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
84[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
85[ 0.000000] NUMA: Initialized distance table, cnt=2
86[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
87[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
88[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
89[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
90[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
91[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
92[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
93[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
94[ 0.000000] Zone ranges:
95[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
96[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
97[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
98[ 0.000000] Movable zone start for each node
99[ 0.000000] Early memory node ranges
100[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
101[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
102[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
103[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
104[ 0.000000] On node 0 totalpages: 1048377
105[ 0.000000] DMA zone: 56 pages used for memmap
106[ 0.000000] DMA zone: 21 pages reserved
107[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
108[ 0.000000] DMA32 zone: 10695 pages used for memmap
109[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
110[ 0.000000] Normal zone: 3584 pages used for memmap
111[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
112[ 0.000000] On node 1 totalpages: 262144
113[ 0.000000] Normal zone: 3584 pages used for memmap
114[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
115[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
116[ 0.000000] ACPI: Local APIC address 0xfee00000
117[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
118[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
119[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
120[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
121[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
125[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
126[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
127[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
128[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
133[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
134[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
135[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
136[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
137[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
138[ 0.000000] ACPI: IRQ9 used by override.
139[ 0.000000] ACPI: IRQ14 used by override.
140[ 0.000000] ACPI: IRQ15 used by override.
141[ 0.000000] Using ACPI (MADT) for SMP configuration information
142[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
143[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
144[ 0.000000] nr_irqs_gsi: 40
145[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
146[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
147[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
148[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
149[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
150[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
151[ 0.000000] Booting paravirtualized kernel on bare hardware
152[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
153[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
154[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
155[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
156[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
157[ 0.000000] Policy zone: Normal
158[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
159[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
160[ 0.000000] AGP: Checking aperture...
161[ 0.000000] AGP: No AGP bridge found
162[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5e8000000-0xe5e9ffffff] (32MB)
163[ 0.000000] Aperture beyond 4GB. Ignoring.
164[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
165[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
166[ 0.000000] AGP: This costs you 64MB of RAM
167[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
168[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
169[ 0.000000] Memory: 5017500K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224584K reserved)
170[ 0.000000] Hierarchical RCU implementation.
171[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
172[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
173[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
174[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
175[ 0.000000] spurious 8259A interrupt: IRQ7.
176[ 0.000000] Console: colour VGA+ 80x25
177[ 0.000000] console [ttyS0] enabled
178[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
179[ 0.000000] hpet clockevent registered
180[ 0.000000] tsc: Fast TSC calibration using PIT
181[ 0.000000] tsc: Detected 1909.635 MHz processor
182[ 0.000157] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.27 BogoMIPS (lpj=7638540)
183[ 0.010794] pid_max: default: 32768 minimum: 301
184[ 0.015450] ACPI: Core revision 20140424
185[ 0.021821] ACPI: All ACPI Tables successfully acquired
186[ 0.027188] Security Framework initialized
187[ 0.031314] AppArmor: AppArmor disabled by boot time parameter
188[ 0.037150] Yama: disabled by default; enable with sysctl kernel.yama.*
189[ 0.044889] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
190[ 0.058047] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
191[ 0.067801] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
192[ 0.074704] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
193[ 0.082564] Initializing cgroup subsys memory
194[ 0.086942] Initializing cgroup subsys devices
195[ 0.091402] Initializing cgroup subsys freezer
196[ 0.095865] Initializing cgroup subsys net_cls
197[ 0.100325] Initializing cgroup subsys blkio
198[ 0.104609] Initializing cgroup subsys perf_event
199[ 0.109319] Initializing cgroup subsys net_prio
200[ 0.113898] tseg: 0000000000
201[ 0.113910] CPU: Physical Processor ID: 0
202[ 0.117938] CPU: Processor Core ID: 0
203[ 0.121621] mce: CPU supports 6 MCE banks
204[ 0.125648] LVT offset 0 assigned for vector 0xf9
205[ 0.130377] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
206Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
207tlb_flushall_shift: 6
208[ 0.145717] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
209[ 0.154728] ftrace: allocating 21601 entries in 85 pages
210[ 0.170142] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
211[ 0.215661] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
212[ 0.332518] Performance Events: AMD PMU driver.
213[ 0.337088] ... version: 0
214[ 0.341101] ... bit width: 48
215[ 0.345204] ... generic registers: 4
216[ 0.349220] ... value mask: 0000ffffffffffff
217[ 0.354521] ... max period: 00007fffffffffff
218[ 0.359849] ... fixed-purpose events: 0
219[ 0.363860] ... event mask: 000000000000000f
220[ 0.371797] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
221[ 0.380006] x86: Booting SMP configuration:
222[ 0.384196] .... node #0, CPUs: #1 #2 #3
223[ 0.428545] .... node #1, CPUs: #4 #5 #6 #7
224[ 0.581154] x86: Booted up 2 nodes, 8 CPUs
225[ 0.585453] smpboot: Total of 8 processors activated (30556.30 BogoMIPS)
226[ 0.597939] devtmpfs: initialized
227[ 0.609864] pinctrl core: initialized pinctrl subsystem
228[ 0.615259] NET: Registered protocol family 16
229[ 0.619921] cpuidle: using governor ladder
230[ 0.624025] cpuidle: using governor menu
231[ 0.627963] node 0 link 1: io port [1000, 3fff]
232[ 0.627966] TOM: 00000000c0000000 aka 3072M
233[ 0.632161] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
234[ 0.632165] node 0 link 1: mmio [fc000000, fc3fffff]
235[ 0.632168] node 0 link 1: mmio [f8000000, fbffffff]
236[ 0.632170] TOM2: 0000000180000000 aka 6144M
237[ 0.636447] bus: [bus 00-05] on node 0 link 1
238[ 0.636449] bus: 00 [io 0x0000-0xffff]
239[ 0.636451] bus: 00 [mem 0xd0000000-0xffffffff]
240[ 0.636453] bus: 00 [mem 0x180000000-0xfcffffffff]
241[ 0.636559] ACPI: bus type PCI registered
242[ 0.640573] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
243[ 0.647171] PCI: Using configuration type 1 for base access
244[ 0.652744] PCI: Using configuration type 1 for extended access
245[ 0.669327] ACPI: Added _OSI(Module Device)
246[ 0.673523] ACPI: Added _OSI(Processor Device)
247[ 0.677974] ACPI: Added _OSI(3.0 _SCP Extensions)
248[ 0.682685] ACPI: Added _OSI(Processor Aggregator Device)
249[ 0.691685] ACPI: Interpreter enabled
250[ 0.695366] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
251[ 0.704630] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
252[ 0.713894] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
253[ 0.723164] ACPI: (supports S0 S1 S5)
254[ 0.726834] ACPI: Using IOAPIC for interrupt routing
255[ 0.731844] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
256[ 0.760371] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
257[ 0.766555] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
258[ 0.774771] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
259[ 0.812822] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
260[ 0.822843] PCI host bridge to bus 0000:00
261[ 0.826947] pci_bus 0000:00: root bus resource [bus 00-05]
262[ 0.832437] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
263[ 0.838623] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
264[ 0.845502] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
265[ 0.852382] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
266[ 0.859259] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
267[ 0.865450] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
268[ 0.865641] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
269[ 0.865648] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
270[ 0.865777] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
271[ 0.865788] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
272[ 0.865812] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
273[ 0.865823] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
274[ 0.865857] pci 0000:00:01.1: PME# supported from D3hot D3cold
275[ 0.865961] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
276[ 0.865969] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
277[ 0.866005] pci 0000:00:02.0: supports D1 D2
278[ 0.866025] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
279[ 0.866087] pci 0000:00:02.0: System wakeup disabled by ACPI
280[ 0.871812] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
281[ 0.871825] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
282[ 0.871875] pci 0000:00:02.1: supports D1 D2
283[ 0.871885] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
284[ 0.871936] pci 0000:00:02.1: System wakeup disabled by ACPI
285[ 0.877667] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
286[ 0.877702] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
287[ 0.877723] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
288[ 0.884861] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
289[ 0.891394] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
290[ 0.898531] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
291[ 0.905150] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
292[ 0.905165] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
293[ 0.905170] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
294[ 0.905175] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
295[ 0.905180] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
296[ 0.905184] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
297[ 0.905189] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
298[ 0.905331] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
299[ 0.905341] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
300[ 0.905346] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
301[ 0.905351] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
302[ 0.905355] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
303[ 0.905360] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
304[ 0.905365] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
305[ 0.905502] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
306[ 0.905633] pci 0000:00:09.0: System wakeup disabled by ACPI
307[ 0.911355] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
308[ 0.911405] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
309[ 0.911455] pci 0000:00:0b.0: System wakeup disabled by ACPI
310[ 0.917177] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
311[ 0.917232] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
312[ 0.917284] pci 0000:00:0c.0: System wakeup disabled by ACPI
313[ 0.923004] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
314[ 0.923054] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
315[ 0.923105] pci 0000:00:0d.0: System wakeup disabled by ACPI
316[ 0.928829] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
317[ 0.928879] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
318[ 0.928935] pci 0000:00:0e.0: System wakeup disabled by ACPI
319[ 0.934669] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
320[ 0.934799] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
321[ 0.934911] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
322[ 0.935035] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
323[ 0.935165] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
324[ 0.935276] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
325[ 0.935414] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
326[ 0.935546] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
327[ 0.935666] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
328[ 0.935797] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
329[ 0.935999] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
330[ 0.936024] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
331[ 0.936043] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
332[ 0.936057] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
333[ 0.936114] pci 0000:01:04.0: supports D1 D2
334[ 0.936207] pci 0000:00:09.0: PCI bridge to [bus 01]
335[ 0.941185] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
336[ 0.941188] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
337[ 0.941191] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
338[ 0.941304] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
339[ 0.941347] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
340[ 0.941390] pci 0000:02:00.0: reg 0x30: [mem 0x7be00000-0x7be0ffff pref]
341[ 0.941476] pci 0000:02:00.0: PME# supported from D3hot D3cold
342[ 0.941572] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
343[ 0.951570] pci 0000:00:0b.0: PCI bridge to [bus 02]
344[ 0.956538] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
345[ 0.956637] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.956670] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
347[ 0.956781] pci 0000:03:00.0: PME# supported from D3hot D3cold
348[ 0.956882] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
349[ 0.966885] pci 0000:00:0c.0: PCI bridge to [bus 03]
350[ 0.971854] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
351[ 0.971930] pci 0000:00:0d.0: PCI bridge to [bus 04]
352[ 0.976966] pci 0000:00:0e.0: PCI bridge to [bus 05]
353[ 0.981953] pci_bus 0000:00: on NUMA node 0
354[ 0.982056] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
355[ 0.988206] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
356[ 0.994346] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
357[ 1.001669] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
358[ 1.008987] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
359[ 1.016344] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
360[ 1.023652] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
361[ 1.029798] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
362[ 1.035938] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
363[ 1.043295] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
364[ 1.050600] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
365[ 1.057915] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
366[ 1.064049] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
367[ 1.070278] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
368[ 1.077600] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
369[ 1.084902] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
370[ 1.092224] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
371[ 1.100764] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
372[ 1.107254] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
373[ 1.113747] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
374[ 1.120231] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
375[ 1.126954] ACPI: Enabled 1 GPEs in block 00 to 1F
376[ 1.132074] vgaarb: setting as boot device: PCI:0000:01:04.0
377[ 1.137744] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
378[ 1.145840] vgaarb: loaded
379[ 1.148559] vgaarb: bridge control possible 0000:01:04.0
380[ 1.154042] PCI: Using ACPI for IRQ routing
381[ 1.158239] PCI: pci_cache_line_size set to 64 bytes
382[ 1.158297] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
383[ 1.158300] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
384[ 1.158620] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
385[ 1.165671] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
386[ 1.170742] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
387[ 1.179425] Switched to clocksource hpet
388[ 1.194971] pnp: PnP ACPI init
389[ 1.198080] ACPI: bus type PNP registered
390[ 1.202639] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
391[ 1.202719] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
392[ 1.202817] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
393[ 1.202895] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
394[ 1.202934] pnp 00:04: [dma 2]
395[ 1.202979] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
396[ 1.203001] pnp: PnP ACPI: found 5 devices
397[ 1.207113] ACPI: bus type PNP unregistered
398[ 1.219152] pci 0000:02:00.0: can't claim BAR 6 [mem 0x7be00000-0x7be0ffff pref]: no compatible bridge window
399[ 1.229105] pci 0000:00:09.0: PCI bridge to [bus 01]
400[ 1.234080] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
401[ 1.240179] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
402[ 1.246971] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
403[ 1.254204] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
404[ 1.261432] pci 0000:00:0b.0: PCI bridge to [bus 02]
405[ 1.266403] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
406[ 1.273198] pci 0000:00:0c.0: PCI bridge to [bus 03]
407[ 1.278169] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
408[ 1.284965] pci 0000:00:0d.0: PCI bridge to [bus 04]
409[ 1.289936] pci 0000:00:0e.0: PCI bridge to [bus 05]
410[ 1.294910] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
411[ 1.294913] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
412[ 1.294915] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
413[ 1.294918] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
414[ 1.294920] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
415[ 1.294923] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
416[ 1.294927] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
417[ 1.294929] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
418[ 1.294932] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
419[ 1.294935] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
420[ 1.295081] NET: Registered protocol family 2
421[ 1.299976] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
422[ 1.307667] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
423[ 1.314999] TCP: Hash tables configured (established 65536 bind 65536)
424[ 1.321604] TCP: reno registered
425[ 1.324856] UDP hash table entries: 4096 (order: 5, 131072 bytes)
426[ 1.331068] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
427[ 1.337865] NET: Registered protocol family 1
428[ 1.342612] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
429[ 1.348694] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
430[ 1.354598] pci 0000:00:00.0: Found enabled HT MSI Mapping
431[ 1.360143] pci 0000:00:00.0: Found enabled HT MSI Mapping
432[ 1.365638] pci 0000:00:0b.0: Found disabled HT MSI Mapping
433[ 1.371220] pci 0000:00:00.0: Found enabled HT MSI Mapping
434[ 1.376755] pci 0000:00:00.0: Found enabled HT MSI Mapping
435[ 1.382257] pci 0000:00:0c.0: Found disabled HT MSI Mapping
436[ 1.387840] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.393376] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.398887] pci 0000:00:0d.0: Found disabled HT MSI Mapping
439[ 1.404473] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.410024] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.415524] pci 0000:00:0e.0: Found disabled HT MSI Mapping
442[ 1.421112] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.426633] pci 0000:01:04.0: Video device with shadowed ROM
444[ 1.426641] PCI: CLS 64 bytes, default 64
445[ 1.426751] Unpacking initramfs...
446[ 1.659542] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
447[ 1.667465] PCI-DMA: Disabling AGP.
448[ 1.672558] PCI-DMA: aperture base @ b4000000 size 65536 KB
449[ 1.678138] PCI-DMA: using GART IOMMU.
450[ 1.681897] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
451[ 1.693918] platform rtc_cmos: registered platform RTC device (no PNP device found)
452[ 1.702102] microcode: CPU0: patch_level=0x01000084
453[ 1.706994] microcode: CPU1: patch_level=0x01000084
454[ 1.711894] microcode: CPU2: patch_level=0x01000084
455[ 1.716794] microcode: CPU3: patch_level=0x01000084
456[ 1.721698] microcode: CPU4: patch_level=0x01000084
457[ 1.726590] microcode: CPU5: patch_level=0x01000084
458[ 1.731484] microcode: CPU6: patch_level=0x01000084
459[ 1.736379] microcode: CPU7: patch_level=0x01000084
460[ 1.741367] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
461[ 1.750174] LVT offset 1 assigned for vector 0x400
462[ 1.754986] IBS: LVT offset 1 assigned
463[ 1.758772] perf: AMD IBS detected (0x00000007)
464[ 1.763923] futex hash table entries: 2048 (order: 5, 131072 bytes)
465[ 1.770315] audit: initializing netlink subsys (disabled)
466[ 1.775747] audit: type=2000 audit(1449677349.508:1): initialized
467[ 1.782624] HugeTLB registered 2 MB page size, pre-allocated 0 pages
468[ 1.789032] zbud: loaded
469[ 1.791946] VFS: Disk quotas dquot_6.5.2
470[ 1.795916] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
471[ 1.802465] msgmni has been set to 9945
472[ 1.806851] alg: No test for stdrng (krng)
473[ 1.811020] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
474[ 1.818517] io scheduler noop registered
475[ 1.822450] io scheduler deadline registered
476[ 1.826810] io scheduler cfq registered (default)
477[ 1.831734] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
478[ 1.831886] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
479[ 1.832006] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
480[ 1.832136] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
481[ 1.832302] aer 0000:00:0b.0:pcie02: service driver aer loaded
482[ 1.832332] aer 0000:00:0c.0:pcie02: service driver aer loaded
483[ 1.832358] aer 0000:00:0d.0:pcie02: service driver aer loaded
484[ 1.832384] aer 0000:00:0e.0:pcie02: service driver aer loaded
485[ 1.832404] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
486[ 1.839371] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
487[ 1.845898] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
488[ 1.845908] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
489[ 1.852872] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
490[ 1.859406] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
491[ 1.859417] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
492[ 1.866378] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
493[ 1.866389] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
494[ 1.873354] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
495[ 1.873381] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
496[ 1.878990] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
497[ 1.885728] GHES: HEST is not enabled!
498[ 1.889616] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
499[ 1.916205] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
500[ 1.943886] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
501[ 1.951826] Linux agpgart interface v0.103
502[ 1.956143] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
503[ 1.966495] serio: i8042 KBD port at 0x60,0x64 irq 1
504[ 1.971489] serio: i8042 AUX port at 0x60,0x64 irq 12
505[ 1.976776] mousedev: PS/2 mouse device common for all mice
506[ 1.982456] rtc_cmos rtc_cmos: RTC can wake from S4
507[ 1.987582] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
508[ 1.993982] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
509[ 2.001841] ledtrig-cpu: registered to indicate activity on CPUs
510[ 2.008130] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
511[ 2.014575] AMD IOMMUv2 functionality not available on this system
512[ 2.020942] TCP: cubic registered
513[ 2.024409] NET: Registered protocol family 10
514[ 2.029235] mip6: Mobile IPv6
515[ 2.030507] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
516[ 2.040830] NET: Registered protocol family 17
517[ 2.045290] mpls_gso: MPLS GSO support
518[ 2.049897] registered taskstats version 1
519[ 2.054767] rtc_cmos rtc_cmos: setting system clock to 2015-12-09 16:09:11 UTC (1449677351)
520[ 2.063190] PM: Hibernation image not present or could not be loaded.
521[ 2.065006] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
522[ 2.072865] Write protecting the kernel read-only data: 8192k
523[ 2.082120] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
524[ 2.090717] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
525[ 2.114576] systemd-udevd[99]: starting version 215
526[ 2.120359] random: systemd-udevd urandom read with 3 bits of entropy available
527[ 2.151699] pps_core: LinuxPPS API ver. 1 registered
528[ 2.156692] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
529[ 2.166297] ACPI: bus type USB registered
530[ 2.170518] usbcore: registered new interface driver usbfs
531[ 2.170568] PTP clock support registered
532[ 2.180043] usbcore: registered new interface driver hub
533[ 2.185622] usbcore: registered new device driver usb
534[ 2.185722] tg3.c:v3.137 (May 11, 2014)
535[ 2.185735] tg3 0000:02:00.0: enabling device (0004 -> 0006)
536[ 2.185940] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
537[ 2.207343] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
538[ 2.214622] ehci-pci: EHCI PCI platform driver
539[ 2.219310] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
540[ 2.219444] ehci-pci 0000:00:02.1: EHCI Host Controller
541[ 2.219468] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
542[ 2.219487] ehci-pci 0000:00:02.1: debug port 1
543[ 2.219534] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
544[ 2.219563] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
545[ 2.231081] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
546[ 2.231164] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
547[ 2.231166] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
548[ 2.231167] usb usb1: Product: EHCI Host Controller
549[ 2.231168] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
550[ 2.231170] usb usb1: SerialNumber: 0000:00:02.1
551[ 2.231409] hub 1-0:1.0: USB hub found
552[ 2.231419] hub 1-0:1.0: 10 ports detected
553[ 2.292126] ohci-pci: OHCI PCI platform driver
554[ 2.296807] ohci-pci 0000:00:02.0: OHCI PCI host controller
555[ 2.302407] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
556[ 2.309849] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
557[ 2.326290] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
558[ 2.336552] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
559[ 2.346286] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
560[ 2.354116] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
561[ 2.360923] tg3 0000:03:00.0: enabling device (0004 -> 0006)
562[ 2.366729] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
563[ 2.373077] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
564[ 2.379868] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
565[ 2.387091] usb usb2: Product: OHCI PCI host controller
566[ 2.392323] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
567[ 2.398422] usb usb2: SerialNumber: 0000:00:02.0
568[ 2.403240] hub 2-0:1.0: USB hub found
569[ 2.407012] hub 2-0:1.0: 10 ports detected
570[ 2.454900] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
571[ 2.465167] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
572[ 2.474907] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
573[ 2.482739] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
574[ 2.495980] FS-Cache: Loaded
575[ 2.503055] RPC: Registered named UNIX socket transport module.
576[ 2.509659] RPC: Registered udp transport module.
577[ 2.515747] RPC: Registered tcp transport module.
578[ 2.521838] RPC: Registered tcp NFSv4.1 backchannel transport module.
579[ 2.534193] FS-Cache: Netfs 'nfs' registered for caching
580[ 2.547959] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
581[ 2.595067] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
582[ 2.690922] tsc: Refined TSC clocksource calibration: 1909.786 MHz
583[ 3.694653] Switched to clocksource tsc
584[ 4.189661] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
585[ 4.196191] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
586[ 4.203077] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
587[ 5.051903] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
588[ 5.065603] systemd[1]: Detected architecture 'x86-64'.
589[ 5.285077] systemd[1]: Inserted module 'autofs4'
590[ 5.291105] systemd[1]: Set hostname to <cb-test-tgt>.
591[ 5.381481] random: nonblocking pool is initialized
592[ 5.531898] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
593[ 5.544627] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
594[ 5.560031] systemd[1]: Expecting device dev-ttyS0.device...
595[ 5.574054] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
596[ 5.581837] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
597[ 5.589445] systemd[1]: Starting Remote File Systems (Pre).
598[ 5.605976] systemd[1]: Reached target Remote File Systems (Pre).
599[ 5.612098] systemd[1]: Starting Encrypted Volumes.
600[ 5.625942] systemd[1]: Reached target Encrypted Volumes.
601[ 5.631406] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
602[ 5.653935] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
603[ 5.663364] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
604[ 5.671425] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
605[ 5.679358] systemd[1]: Starting Paths.
606[ 5.693917] systemd[1]: Reached target Paths.
607[ 5.698318] systemd[1]: Starting Swap.
608[ 5.709920] systemd[1]: Reached target Swap.
609[ 5.714217] systemd[1]: Starting Root Slice.
610[ 5.725907] systemd[1]: Created slice Root Slice.
611[ 5.730639] systemd[1]: Starting User and Session Slice.
612[ 5.745926] systemd[1]: Created slice User and Session Slice.
613[ 5.751696] systemd[1]: Starting Delayed Shutdown Socket.
614[ 5.765985] systemd[1]: Listening on Delayed Shutdown Socket.
615[ 5.771807] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
616[ 5.789903] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
617[ 5.796890] systemd[1]: Starting Journal Socket (/dev/log).
618[ 5.813880] systemd[1]: Listening on Journal Socket (/dev/log).
619[ 5.819829] systemd[1]: Starting udev Kernel Socket.
620[ 5.833879] systemd[1]: Listening on udev Kernel Socket.
621[ 5.839236] systemd[1]: Starting udev Control Socket.
622[ 5.853853] systemd[1]: Listening on udev Control Socket.
623[ 5.859298] systemd[1]: Starting Journal Socket.
624[ 5.873849] systemd[1]: Listening on Journal Socket.
625[ 5.878875] systemd[1]: Starting System Slice.
626[ 5.893837] systemd[1]: Created slice System Slice.
627[ 5.898737] systemd[1]: Starting system-getty.slice.
628[ 5.913850] systemd[1]: Created slice system-getty.slice.
629[ 5.919278] systemd[1]: Starting system-serial\x2dgetty.slice.
630[ 5.933838] systemd[1]: Created slice system-serial\x2dgetty.slice.
631[ 5.940157] systemd[1]: Starting Increase datagram queue length...
632[ 5.958742] systemd[1]: Starting udev Coldplug all Devices...
633[ 6.201574] systemd[1]: Starting Load Kernel Modules...
634[ 6.221158] systemd[1]: Started Set Up Additional Binary Formats.
635[ 6.227518] systemd[1]: Mounting Debug File System...
636[ 6.243748] systemd[1]: Starting Create list of required static device nodes for the current kernel...
637[ 6.267841] systemd[1]: Mounting POSIX Message Queue File System...
638[ 6.287702] systemd[1]: Mounting Huge Pages File System...
639[ 6.303106] systemd[1]: Starting Slices.
640[ 6.317791] systemd[1]: Reached target Slices.
641[ 6.322327] systemd[1]: Starting Remount Root and Kernel File Systems...
642[ 6.349749] systemd[1]: Mounted Huge Pages File System.
643[ 6.365686] systemd[1]: Mounted POSIX Message Queue File System.
644[ 6.381761] systemd[1]: Mounted Debug File System.
645[ 6.397682] systemd[1]: Started Increase datagram queue length.
646[ 6.413696] systemd[1]: Started Load Kernel Modules.
647[ 6.433665] systemd[1]: Started Create list of required static device nodes for the current kernel.
648[ 6.453728] systemd[1]: Started Remount Root and Kernel File Systems.
649[ 6.469669] systemd[1]: Started udev Coldplug all Devices.
650[ 6.515365] systemd[1]: Started Various fixups to make systemd work better on Debian.
651[ 6.523233] systemd[1]: Starting Load/Save Random Seed...
652[ 6.538595] systemd[1]: Starting Create Static Device Nodes in /dev...
653[ 6.554524] systemd[1]: Starting Apply Kernel Variables...
654[ 6.570732] systemd[1]: Mounted Configuration File System.
655[ 6.576288] systemd[1]: Mounted FUSE Control File System.
656[ 6.581705] systemd[1]: Starting Syslog Socket.
657[ 6.593692] systemd[1]: Listening on Syslog Socket.
658[ 6.598686] systemd[1]: Starting Sockets.
659[ 6.613663] systemd[1]: Reached target Sockets.
660[ 6.618271] systemd[1]: Starting Journal Service...
661[ 6.645659] systemd[1]: Started Journal Service.
662[ 6.778444] systemd-udevd[189]: starting version 215
663[ 7.050072] systemd-journald[188]: Received request to flush runtime journal from PID 1
664[ 7.493706] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
665[ 7.501234] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
666[ 7.509129] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
667[ 7.517165] EDAC MC: Ver: 3.0.0
668[ 7.572495] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
669[ 7.580923] ACPI: Power Button [PWRB]
670[ 7.584808] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
671[ 7.592247] ACPI: Power Button [PWRF]
672[ 7.597504] MCE: In-kernel MCE decoding enabled.
673[ 7.617211] FDC 0 is a post-1991 82077
674[ 7.628243] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
675[ 7.633538] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
676[ 7.639951] SCSI subsystem initialized
677[ 7.640165] acpi-cpufreq: overriding BIOS provided _PSD data
678[ 7.650493] AMD64 EDAC driver v3.4.0
679[ 7.654469] EDAC amd64: DRAM ECC enabled.
680[ 7.654528] input: PC Speaker as /devices/platform/pcspkr/input/input4
681[ 7.665571] EDAC amd64: F10h detected (node 0).
682[ 7.670302] EDAC MC: DCT0 chip selects:
683[ 7.670304] EDAC amd64: MC: 0: 0MB 1: 0MB
684[ 7.675062] EDAC amd64: MC: 2: 0MB 3: 0MB
685[ 7.680069] EDAC amd64: MC: 4: 0MB 5: 0MB
686[ 7.684836] EDAC amd64: MC: 6: 1024MB 7: 1024MB
687[ 7.689870] EDAC MC: DCT1 chip selects:
688[ 7.689872] EDAC amd64: MC: 0: 0MB 1: 0MB
689[ 7.694595] EDAC amd64: MC: 2: 0MB 3: 0MB
690[ 7.699509] EDAC amd64: MC: 4: 0MB 5: 0MB
691[ 7.704223] EDAC amd64: MC: 6: 1024MB 7: 1024MB
692[ 7.709117] EDAC amd64: using x4 syndromes.
693[ 7.713304] EDAC amd64: MCT channel count: 2
694[ 7.717820] EDAC amd64: CS6: Registered DDR2 RAM
695[ 7.722529] EDAC amd64: CS7: Registered DDR2 RAM
696[ 7.727867] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
697[ 7.737784] EDAC amd64: DRAM ECC enabled.
698[ 7.742098] EDAC amd64: F10h detected (node 1).
699[ 7.742424] libata version 3.00 loaded.
700[ 7.746767] EDAC MC: DCT0 chip selects:
701[ 7.746771] EDAC amd64: MC: 0: 1024MB 1: 0MB
702[ 7.751509] EDAC amd64: MC: 2: 0MB 3: 0MB
703[ 7.756222] EDAC amd64: MC: 4: 0MB 5: 0MB
704[ 7.760935] EDAC amd64: MC: 6: 0MB 7: 0MB
705[ 7.765648] EDAC MC: DCT1 chip selects:
706[ 7.765651] EDAC amd64: MC: 0: 0MB 1: 0MB
707[ 7.770370] EDAC amd64: MC: 2: 0MB 3: 0MB
708[ 7.775075] EDAC amd64: MC: 4: 0MB 5: 0MB
709[ 7.779811] EDAC amd64: MC: 6: 0MB 7: 0MB
710[ 7.784552] EDAC amd64: using x4 syndromes.
711[ 7.788787] EDAC amd64: MCT channel count: 1
712[ 7.793206] EDAC amd64: CS0: Registered DDR2 RAM
713[ 7.798382] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
714[ 7.808228] pata_amd 0000:00:06.0: version 0.4.1
715[ 7.808280] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
716[ 7.809280] scsi0 : pata_amd
717[ 7.822662] scsi1 : pata_amd
718[ 7.825801] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
719[ 7.832786] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
720[ 7.840331] sata_nv 0000:00:07.0: version 3.5
721[ 7.840828] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
722[ 7.846784] kvm: Nested Virtualization enabled
723[ 7.847452] scsi2 : sata_nv
724[ 7.847681] scsi3 : sata_nv
725[ 7.847783] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
726[ 7.847785] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
727[ 7.848201] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
728[ 7.848826] scsi4 : sata_nv
729[ 7.849026] scsi5 : sata_nv
730[ 7.849133] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
731[ 7.849135] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
732[ 7.896823] kvm: Nested Paging enabled
733[ 8.157045] ata3: SATA link down (SStatus 0 SControl 300)
734[ 8.162507] ata5: SATA link down (SStatus 0 SControl 300)
735[ 8.476942] ata4: SATA link down (SStatus 0 SControl 300)
736[ 8.792839] ata6: SATA link down (SStatus 0 SControl 300)
737[ 38.681312] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****