Gitiles
Code Review Sign In
review.coreboot.org / board-status / f0c508b2f7394ec2ebaf42ed5f7a0bd316ff5e6b / . / asus / kfsn4-dre / 4.1-430-g1cb1c92 / 2015-08-31T03:17:08Z / kernel_log.txt
blob: ff9ff104d8f79cf55512c5a0d7737cb2e1151430 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Standd6eed9b2015-08-31 04:44:13 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.1-430-g1cb1c92-dirty 08/31/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB7870 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7940 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7AB8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7AF0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B30 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
91[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
93[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
95[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
96[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
97[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
98[ 0.000000] Zone ranges:
99[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
100[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
101[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
102[ 0.000000] Movable zone start for each node
103[ 0.000000] Early memory node ranges
104[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
105[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
106[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
107[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
108[ 0.000000] On node 0 totalpages: 1048377
109[ 0.000000] DMA zone: 56 pages used for memmap
110[ 0.000000] DMA zone: 21 pages reserved
111[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
112[ 0.000000] DMA32 zone: 10695 pages used for memmap
113[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
114[ 0.000000] Normal zone: 3584 pages used for memmap
115[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
116[ 0.000000] On node 1 totalpages: 262144
117[ 0.000000] Normal zone: 3584 pages used for memmap
118[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
119[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
120[ 0.000000] ACPI: Local APIC address 0xfee00000
121[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
137[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
138[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
139[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
142[ 0.000000] ACPI: IRQ9 used by override.
143[ 0.000000] ACPI: IRQ14 used by override.
144[ 0.000000] ACPI: IRQ15 used by override.
145[ 0.000000] Using ACPI (MADT) for SMP configuration information
146[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
147[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
148[ 0.000000] nr_irqs_gsi: 40
149[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
150[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
152[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
154[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
155[ 0.000000] Booting paravirtualized kernel on bare hardware
156[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
157[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
158[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
159[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
160[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
161[ 0.000000] Policy zone: Normal
162[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
173[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [tty0] enabled
182[ 0.000000] console [ttyS0] enabled
183[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
184[ 0.000000] hpet clockevent registered
185[ 0.000000] tsc: Fast TSC calibration using PIT
186[ 0.000000] tsc: Detected 1909.854 MHz processor
187[ 0.000160] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.70 BogoMIPS (lpj=7639416)
188[ 0.010963] pid_max: default: 32768 minimum: 301
189[ 0.015684] ACPI: Core revision 20140424
190[ 0.022117] ACPI: All ACPI Tables successfully acquired
191[ 0.027638] Security Framework initialized
192[ 0.031824] AppArmor: AppArmor disabled by boot time parameter
193[ 0.037732] Yama: disabled by default; enable with sysctl kernel.yama.*
194[ 0.045544] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
195[ 0.058830] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
196[ 0.068653] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.075651] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
198[ 0.083605] Initializing cgroup subsys memory
199[ 0.088071] Initializing cgroup subsys devices
200[ 0.092623] Initializing cgroup subsys freezer
201[ 0.097147] Initializing cgroup subsys net_cls
202[ 0.101691] Initializing cgroup subsys blkio
203[ 0.106047] Initializing cgroup subsys perf_event
204[ 0.110843] Initializing cgroup subsys net_prio
205[ 0.115501] tseg: 0000000000
206[ 0.115515] CPU: Physical Processor ID: 0
207[ 0.119635] CPU: Processor Core ID: 0
208[ 0.124432] mce: CPU supports 6 MCE banks
209[ 0.128562] LVT offset 0 assigned for vector 0xf9
210[ 0.133367] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
211Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
212tlb_flushall_shift: 6
213[ 0.148855] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
214[ 0.157990] ftrace: allocating 21601 entries in 85 pages
215[ 0.173461] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
216[ 0.219107] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
217[ 0.336303] Performance Events: AMD PMU driver.
218[ 0.341027] ... version: 0
219[ 0.345118] ... bit width: 48
220[ 0.349305] ... generic registers: 4
221[ 0.353402] ... value mask: 0000ffffffffffff
222[ 0.358795] ... max period: 00007fffffffffff
223[ 0.364200] ... fixed-purpose events: 0
224[ 0.368304] ... event mask: 000000000000000f
225[ 0.376328] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
226[ 0.384638] x86: Booting SMP configuration:
227[ 0.388925] .... node #0, CPUs: #1 #2 #3
228[ 0.433503] .... node #1, CPUs: #4 #5 #6 #7
229[ 0.585072] x86: Booted up 2 nodes, 8 CPUs
230[ 0.589516] smpboot: Total of 8 processors activated (30558.09 BogoMIPS)
231[ 0.602131] devtmpfs: initialized
232[ 0.614118] pinctrl core: initialized pinctrl subsystem
233[ 0.619591] NET: Registered protocol family 16
234[ 0.624331] cpuidle: using governor ladder
235[ 0.628514] cpuidle: using governor menu
236[ 0.632520] node 0 link 1: io port [1000, 3fff]
237[ 0.632523] TOM: 00000000c0000000 aka 3072M
238[ 0.636785] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
239[ 0.636789] node 0 link 1: mmio [fc000000, fc3fffff]
240[ 0.636792] node 0 link 1: mmio [f8000000, fbffffff]
241[ 0.636795] TOM2: 0000000180000000 aka 6144M
242[ 0.641143] bus: [bus 00-05] on node 0 link 1
243[ 0.641145] bus: 00 [io 0x0000-0xffff]
244[ 0.641147] bus: 00 [mem 0xd0000000-0xffffffff]
245[ 0.641148] bus: 00 [mem 0x180000000-0xfcffffffff]
246[ 0.641253] ACPI: bus type PCI registered
247[ 0.645338] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
248[ 0.652009] PCI: Using configuration type 1 for base access
249[ 0.657650] PCI: Using configuration type 1 for extended access
250[ 0.664267] mtrr: your CPUs had inconsistent variable MTRR settings
251[ 0.670617] mtrr: probably your BIOS does not setup all CPUs.
252[ 0.676449] mtrr: corrected configuration.
253[ 0.693195] ACPI: Added _OSI(Module Device)
254[ 0.697499] ACPI: Added _OSI(Processor Device)
255[ 0.702014] ACPI: Added _OSI(3.0 _SCP Extensions)
256[ 0.706797] ACPI: Added _OSI(Processor Aggregator Device)
257[ 0.715901] ACPI: Interpreter enabled
258[ 0.719647] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
259[ 0.729105] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
260[ 0.738561] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
261[ 0.748001] ACPI: (supports S0 S1 S5)
262[ 0.751731] ACPI: Using IOAPIC for interrupt routing
263[ 0.756815] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
264[ 0.785401] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
265[ 0.791660] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
266[ 0.799967] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
267[ 0.839352] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
268[ 0.849532] PCI host bridge to bus 0000:00
269[ 0.853725] pci_bus 0000:00: root bus resource [bus 00-05]
270[ 0.859302] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
271[ 0.865576] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
272[ 0.872543] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
273[ 0.879494] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
274[ 0.886467] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
275[ 0.892748] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
276[ 0.892934] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
277[ 0.892941] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
278[ 0.893078] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
279[ 0.893086] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
280[ 0.893111] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
281[ 0.893123] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
282[ 0.893157] pci 0000:00:01.1: PME# supported from D3hot D3cold
283[ 0.893335] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
284[ 0.893350] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
285[ 0.893386] pci 0000:00:02.0: supports D1 D2
286[ 0.893388] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
287[ 0.893437] pci 0000:00:02.0: System wakeup disabled by ACPI
288[ 0.899252] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
289[ 0.899266] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
290[ 0.899310] pci 0000:00:02.1: supports D1 D2
291[ 0.899321] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
292[ 0.899369] pci 0000:00:02.1: System wakeup disabled by ACPI
293[ 0.905188] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
294[ 0.905215] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
295[ 0.905259] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
296[ 0.912493] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
297[ 0.919101] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
298[ 0.926327] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
299[ 0.933044] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
300[ 0.933052] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
301[ 0.933059] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
302[ 0.933064] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
303[ 0.933068] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
304[ 0.933073] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
305[ 0.933078] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
306[ 0.933222] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
307[ 0.933232] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
308[ 0.933237] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
309[ 0.933241] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
310[ 0.933246] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
311[ 0.933250] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
312[ 0.933255] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
313[ 0.933400] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
314[ 0.933538] pci 0000:00:09.0: System wakeup disabled by ACPI
315[ 0.939333] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
316[ 0.939382] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
317[ 0.939432] pci 0000:00:0b.0: System wakeup disabled by ACPI
318[ 0.945256] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
319[ 0.945302] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
320[ 0.945360] pci 0000:00:0c.0: System wakeup disabled by ACPI
321[ 0.951161] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
322[ 0.951200] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
323[ 0.951260] pci 0000:00:0d.0: System wakeup disabled by ACPI
324[ 0.957074] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
325[ 0.957113] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
326[ 0.957192] pci 0000:00:0e.0: System wakeup disabled by ACPI
327[ 0.963011] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
328[ 0.963172] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
329[ 0.963314] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
330[ 0.963432] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
331[ 0.963576] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
332[ 0.963682] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
333[ 0.963847] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
334[ 0.963976] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
335[ 0.964094] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
336[ 0.964198] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
337[ 0.964369] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
338[ 0.964388] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
339[ 0.964406] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
340[ 0.964415] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
341[ 0.964460] pci 0000:01:04.0: supports D1 D2
342[ 0.964561] pci 0000:00:09.0: PCI bridge to [bus 01]
343[ 0.969619] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
344[ 0.969623] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
345[ 0.969626] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
346[ 0.969744] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
347[ 0.969778] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
348[ 0.969809] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
349[ 0.969891] pci 0000:02:00.0: PME# supported from D3hot D3cold
350[ 0.969970] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
351[ 0.980096] pci 0000:00:0b.0: PCI bridge to [bus 02]
352[ 0.985160] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
353[ 0.985277] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
354[ 0.985312] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
355[ 0.985413] pci 0000:03:00.0: PME# supported from D3hot D3cold
356[ 0.985508] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
357[ 0.995628] pci 0000:00:0c.0: PCI bridge to [bus 03]
358[ 1.000685] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
359[ 1.000758] pci 0000:00:0d.0: PCI bridge to [bus 04]
360[ 1.005896] pci 0000:00:0e.0: PCI bridge to [bus 05]
361[ 1.010980] pci_bus 0000:00: on NUMA node 0
362[ 1.011085] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
363[ 1.017515] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
364[ 1.023940] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
365[ 1.031605] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
366[ 1.039253] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
367[ 1.046904] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
368[ 1.054553] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
369[ 1.060968] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
370[ 1.067383] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.075039] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
372[ 1.082678] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
373[ 1.090322] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
374[ 1.096734] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
375[ 1.103149] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
376[ 1.110794] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
377[ 1.118443] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
378[ 1.126123] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
379[ 1.135232] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
380[ 1.141963] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
381[ 1.148679] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
382[ 1.155381] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
383[ 1.162373] ACPI: Enabled 1 GPEs in block 00 to 1F
384[ 1.167643] vgaarb: setting as boot device: PCI:0000:01:04.0
385[ 1.173436] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
386[ 1.181627] vgaarb: loaded
387[ 1.184427] vgaarb: bridge control possible 0000:01:04.0
388[ 1.189979] PCI: Using ACPI for IRQ routing
389[ 1.194259] PCI: pci_cache_line_size set to 64 bytes
390[ 1.194316] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
391[ 1.194319] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
392[ 1.194632] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
393[ 1.201756] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
394[ 1.207031] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
395[ 1.215751] Switched to clocksource hpet
396[ 1.231319] pnp: PnP ACPI init
397[ 1.234534] ACPI: bus type PNP registered
398[ 1.239164] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
399[ 1.239244] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
400[ 1.239341] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.239418] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
402[ 1.239460] pnp 00:04: [dma 2]
403[ 1.239501] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
404[ 1.239523] pnp: PnP ACPI: found 5 devices
405[ 1.243722] ACPI: bus type PNP unregistered
406[ 1.255796] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
407[ 1.265881] pci 0000:00:09.0: PCI bridge to [bus 01]
408[ 1.270925] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
409[ 1.277099] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
410[ 1.283974] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
411[ 1.291303] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
412[ 1.298668] pci 0000:00:0b.0: PCI bridge to [bus 02]
413[ 1.303723] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
414[ 1.310617] pci 0000:00:0c.0: PCI bridge to [bus 03]
415[ 1.315667] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
416[ 1.322553] pci 0000:00:0d.0: PCI bridge to [bus 04]
417[ 1.327600] pci 0000:00:0e.0: PCI bridge to [bus 05]
418[ 1.332652] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
419[ 1.332655] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
420[ 1.332658] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
421[ 1.332661] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
422[ 1.332663] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
423[ 1.332666] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
424[ 1.332669] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
425[ 1.332671] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
426[ 1.332674] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
427[ 1.332677] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
428[ 1.332849] NET: Registered protocol family 2
429[ 1.337835] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
430[ 1.345647] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
431[ 1.353053] TCP: Hash tables configured (established 65536 bind 65536)
432[ 1.359735] TCP: reno registered
433[ 1.363054] UDP hash table entries: 4096 (order: 5, 131072 bytes)
434[ 1.369328] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
435[ 1.376201] NET: Registered protocol family 1
436[ 1.381042] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
437[ 1.387210] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
438[ 1.393208] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.398811] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.404395] pci 0000:00:0b.0: Found disabled HT MSI Mapping
441[ 1.410075] pci 0000:00:00.0: Found enabled HT MSI Mapping
442[ 1.415704] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.421264] pci 0000:00:0c.0: Found disabled HT MSI Mapping
444[ 1.426922] pci 0000:00:00.0: Found enabled HT MSI Mapping
445[ 1.432538] pci 0000:00:00.0: Found enabled HT MSI Mapping
446[ 1.438114] pci 0000:00:0d.0: Found disabled HT MSI Mapping
447[ 1.443773] pci 0000:00:00.0: Found enabled HT MSI Mapping
448[ 1.449390] pci 0000:00:00.0: Found enabled HT MSI Mapping
449[ 1.454973] pci 0000:00:0e.0: Found disabled HT MSI Mapping
450[ 1.460640] pci 0000:00:00.0: Found enabled HT MSI Mapping
451[ 1.466262] pci 0000:01:04.0: Video device with shadowed ROM
452[ 1.466271] PCI: CLS 64 bytes, default 64
453[ 1.466373] Unpacking initramfs...
454[ 1.699382] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
455[ 1.707372] PCI-DMA: Disabling AGP.
456[ 1.712561] PCI-DMA: aperture base @ b4000000 size 65536 KB
457[ 1.718229] PCI-DMA: using GART IOMMU.
458[ 1.722052] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
459[ 1.734163] platform rtc_cmos: registered platform RTC device (no PNP device found)
460[ 1.742517] microcode: CPU0: patch_level=0x01000096
461[ 1.747519] microcode: CPU1: patch_level=0x01000096
462[ 1.752537] microcode: CPU2: patch_level=0x01000096
463[ 1.757546] microcode: CPU3: patch_level=0x01000096
464[ 1.762556] microcode: CPU4: patch_level=0x01000096
465[ 1.767562] microcode: CPU5: patch_level=0x01000096
466[ 1.773670] microcode: CPU6: patch_level=0x01000096
467[ 1.778660] microcode: CPU7: patch_level=0x01000096
468[ 1.783766] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
469[ 1.792696] LVT offset 1 assigned for vector 0x400
470[ 1.797616] IBS: LVT offset 1 assigned
471[ 1.801485] perf: AMD IBS detected (0x00000007)
472[ 1.806713] futex hash table entries: 2048 (order: 5, 131072 bytes)
473[ 1.813213] audit: initializing netlink subsys (disabled)
474[ 1.818725] audit: type=2000 audit(1440995713.632:1): initialized
475[ 1.825691] HugeTLB registered 2 MB page size, pre-allocated 0 pages
476[ 1.832191] zbud: loaded
477[ 1.835147] VFS: Disk quotas dquot_6.5.2
478[ 1.839191] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
479[ 1.845838] msgmni has been set to 9945
480[ 1.850289] alg: No test for stdrng (krng)
481[ 1.854583] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
482[ 1.862227] io scheduler noop registered
483[ 1.866255] io scheduler deadline registered
484[ 1.870688] io scheduler cfq registered (default)
485[ 1.875702] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
486[ 1.875827] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
487[ 1.875953] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
488[ 1.876068] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
489[ 1.876233] aer 0000:00:0b.0:pcie02: service driver aer loaded
490[ 1.876261] aer 0000:00:0c.0:pcie02: service driver aer loaded
491[ 1.876287] aer 0000:00:0d.0:pcie02: service driver aer loaded
492[ 1.876312] aer 0000:00:0e.0:pcie02: service driver aer loaded
493[ 1.876333] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
494[ 1.883403] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
495[ 1.890014] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
496[ 1.890024] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
497[ 1.897071] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
498[ 1.903681] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
499[ 1.903691] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
500[ 1.910735] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
501[ 1.910745] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
502[ 1.917791] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
503[ 1.917821] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
504[ 1.923516] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
505[ 1.930344] GHES: HEST is not enabled!
506[ 1.934306] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
507[ 1.961095] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
508[ 1.988911] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
509[ 1.996973] Linux agpgart interface v0.103
510[ 2.001396] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
511[ 2.011945] serio: i8042 KBD port at 0x60,0x64 irq 1
512[ 2.017037] serio: i8042 AUX port at 0x60,0x64 irq 12
513[ 2.022373] mousedev: PS/2 mouse device common for all mice
514[ 2.028180] rtc_cmos rtc_cmos: RTC can wake from S4
515[ 2.033379] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
516[ 2.039874] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
517[ 2.047859] ledtrig-cpu: registered to indicate activity on CPUs
518[ 2.054128] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
519[ 2.060661] AMD IOMMUv2 functionality not available on this system
520[ 2.067069] TCP: cubic registered
521[ 2.070627] NET: Registered protocol family 10
522[ 2.075598] mip6: Mobile IPv6
523[ 2.078665] NET: Registered protocol family 17
524[ 2.083255] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
525[ 2.091999] mpls_gso: MPLS GSO support
526[ 2.096755] registered taskstats version 1
527[ 2.101712] rtc_cmos rtc_cmos: setting system clock to 2015-08-31 04:35:15 UTC (1440995715)
528[ 2.110311] PM: Hibernation image not present or could not be loaded.
529[ 2.112148] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
530[ 2.120158] Write protecting the kernel read-only data: 8192k
531[ 2.129483] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
532[ 2.138226] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
533[ 2.162305] systemd-udevd[99]: starting version 215
534[ 2.168151] random: systemd-udevd urandom read with 3 bits of entropy available
535[ 2.199936] pps_core: LinuxPPS API ver. 1 registered
536[ 2.205050] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
537[ 2.214715] ACPI: bus type USB registered
538[ 2.219031] usbcore: registered new interface driver usbfs
539[ 2.219084] PTP clock support registered
540[ 2.228722] usbcore: registered new interface driver hub
541[ 2.234388] usbcore: registered new device driver usb
542[ 2.234470] tg3.c:v3.137 (May 11, 2014)
543[ 2.234483] tg3 0000:02:00.0: enabling device (0004 -> 0006)
544[ 2.234686] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
545[ 2.255992] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
546[ 2.263230] ehci-pci: EHCI PCI platform driver
547[ 2.268079] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
548[ 2.268103] ehci-pci 0000:00:02.1: EHCI Host Controller
549[ 2.268121] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
550[ 2.268140] ehci-pci 0000:00:02.1: debug port 1
551[ 2.268186] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
552[ 2.268217] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
553[ 2.279412] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
554[ 2.279482] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
555[ 2.279484] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
556[ 2.279485] usb usb1: Product: EHCI Host Controller
557[ 2.279486] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
558[ 2.279488] usb usb1: SerialNumber: 0000:00:02.1
559[ 2.279797] hub 1-0:1.0: USB hub found
560[ 2.279811] hub 1-0:1.0: 10 ports detected
561[ 2.341996] ohci-pci: OHCI PCI platform driver
562[ 2.346764] ohci-pci 0000:00:02.0: OHCI PCI host controller
563[ 2.352510] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
564[ 2.360098] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
565[ 2.366833] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
566[ 2.377285] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
567[ 2.387174] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
568[ 2.395109] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
569[ 2.402010] tg3 0000:03:00.0: enabling device (0004 -> 0006)
570[ 2.407969] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
571[ 2.421404] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
572[ 2.428321] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
573[ 2.435658] usb usb2: Product: OHCI PCI host controller
574[ 2.440971] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
575[ 2.447144] usb usb2: SerialNumber: 0000:00:02.0
576[ 2.452035] hub 2-0:1.0: USB hub found
577[ 2.455901] hub 2-0:1.0: 10 ports detected
578[ 2.475823] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
579[ 2.486248] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
580[ 2.496116] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
581[ 2.504055] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
582[ 2.517344] FS-Cache: Loaded
583[ 2.524502] RPC: Registered named UNIX socket transport module.
584[ 2.531150] RPC: Registered udp transport module.
585[ 2.537199] RPC: Registered tcp transport module.
586[ 2.543293] RPC: Registered tcp NFSv4.1 backchannel transport module.
587[ 2.555802] FS-Cache: Netfs 'nfs' registered for caching
588[ 2.569739] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
589[ 2.615407] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
590[ 2.731247] tsc: Refined TSC clocksource calibration: 1909.786 MHz
591[ 3.734993] Switched to clocksource tsc
592[ 4.354675] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
593[ 4.361361] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
594[ 4.368315] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
595[ 13.983270] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
596[ 13.997150] systemd[1]: Detected architecture 'x86-64'.
597[ 16.005362] random: nonblocking pool is initialized
598[ 16.859192] systemd[1]: Inserted module 'autofs4'
599[ 16.880836] systemd[1]: Set hostname to <cb-test-tgt>.
600[ 21.919593] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
601[ 21.932480] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
602[ 21.948039] systemd[1]: Expecting device dev-ttyS0.device...
603[ 21.964636] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
604[ 21.972502] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
605[ 21.980193] systemd[1]: Starting Remote File Systems (Pre).
606[ 21.996604] systemd[1]: Reached target Remote File Systems (Pre).
607[ 22.002839] systemd[1]: Starting Encrypted Volumes.
608[ 22.016598] systemd[1]: Reached target Encrypted Volumes.
609[ 22.022138] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
610[ 22.030300] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
611[ 22.038340] systemd[1]: Starting Paths.
612[ 22.052676] systemd[1]: Reached target Paths.
613[ 22.057274] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
614[ 22.080580] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
615[ 22.090134] systemd[1]: Starting Swap.
616[ 22.104654] systemd[1]: Reached target Swap.
617[ 22.109166] systemd[1]: Starting Root Slice.
618[ 22.124571] systemd[1]: Created slice Root Slice.
619[ 22.129413] systemd[1]: Starting User and Session Slice.
620[ 22.144568] systemd[1]: Created slice User and Session Slice.
621[ 22.150471] systemd[1]: Starting Delayed Shutdown Socket.
622[ 22.164566] systemd[1]: Listening on Delayed Shutdown Socket.
623[ 22.170469] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
624[ 22.280505] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
625[ 22.287588] systemd[1]: Starting Journal Socket (/dev/log).
626[ 22.332483] systemd[1]: Listening on Journal Socket (/dev/log).
627[ 22.338520] systemd[1]: Starting udev Kernel Socket.
628[ 22.356479] systemd[1]: Listening on udev Kernel Socket.
629[ 22.361915] systemd[1]: Starting udev Control Socket.
630[ 22.376551] systemd[1]: Listening on udev Control Socket.
631[ 22.382154] systemd[1]: Starting Journal Socket.
632[ 22.396477] systemd[1]: Listening on Journal Socket.
633[ 22.401632] systemd[1]: Starting System Slice.
634[ 22.416471] systemd[1]: Created slice System Slice.
635[ 22.421515] systemd[1]: Starting system-getty.slice.
636[ 22.436483] systemd[1]: Created slice system-getty.slice.
637[ 22.441997] systemd[1]: Starting system-serial\x2dgetty.slice.
638[ 22.456462] systemd[1]: Created slice system-serial\x2dgetty.slice.
639[ 22.462885] systemd[1]: Starting Increase datagram queue length...
640[ 22.481945] systemd[1]: Mounting Debug File System...
641[ 22.497671] systemd[1]: Mounting POSIX Message Queue File System...
642[ 22.641006] systemd[1]: Starting Load Kernel Modules...
643[ 24.909706] systemd[1]: Started Set Up Additional Binary Formats.
644[ 25.163681] systemd[1]: Starting Create list of required static device nodes for the current kernel...
645[ 25.188886] systemd[1]: Starting udev Coldplug all Devices...
646[ 25.204711] systemd[1]: Mounting Huge Pages File System...
647[ 25.220385] systemd[1]: Starting Slices.
648[ 25.231494] systemd[1]: Reached target Slices.
649[ 25.236248] systemd[1]: Starting Remount Root and Kernel File Systems...
650[ 25.263624] systemd[1]: Mounted POSIX Message Queue File System.
651[ 25.279534] systemd[1]: Mounted Debug File System.
652[ 25.295530] systemd[1]: Started Increase datagram queue length.
653[ 25.302471] systemd[1]: Starting Syslog Socket.
654[ 25.315513] systemd[1]: Listening on Syslog Socket.
655[ 25.320652] systemd[1]: Starting Sockets.
656[ 25.335521] systemd[1]: Reached target Sockets.
657[ 25.340243] systemd[1]: Starting Journal Service...
658[ 25.363474] systemd[1]: Started Journal Service.
659[ 29.807401] systemd-udevd[189]: starting version 215
660[ 29.839498] systemd-journald[173]: Received request to flush runtime journal from PID 1
661[ 40.384458] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
662[ 40.392392] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
663[ 40.669476] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
664[ 41.338854] SCSI subsystem initialized
665[ 41.343225] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
666[ 41.351852] ACPI: Power Button [PWRB]
667[ 41.355711] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
668[ 41.363372] ACPI: Power Button [PWRF]
669[ 41.367556] EDAC MC: Ver: 3.0.0
670[ 41.565755] FDC 0 is a post-1991 82077
671[ 42.010113] libata version 3.00 loaded.
672[ 42.060316] MCE: In-kernel MCE decoding enabled.
673[ 42.102028] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
674[ 42.107345] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
675[ 42.115726] input: PC Speaker as /devices/platform/pcspkr/input/input4
676[ 42.182119] AMD64 EDAC driver v3.4.0
677[ 42.185872] EDAC amd64: DRAM ECC enabled.
678[ 42.189983] EDAC amd64: F10h detected (node 0).
679[ 42.194624] EDAC MC: DCT0 chip selects:
680[ 42.194629] EDAC amd64: MC: 0: 0MB 1: 0MB
681[ 42.199419] EDAC amd64: MC: 2: 0MB 3: 0MB
682[ 42.204252] EDAC amd64: MC: 4: 0MB 5: 0MB
683[ 42.209078] EDAC amd64: MC: 6: 1024MB 7: 1024MB
684[ 42.213924] EDAC MC: DCT1 chip selects:
685[ 42.213926] EDAC amd64: MC: 0: 0MB 1: 0MB
686[ 42.214224] acpi-cpufreq: overriding BIOS provided _PSD data
687[ 42.224501] EDAC amd64: MC: 2: 0MB 3: 0MB
688[ 42.229346] EDAC amd64: MC: 4: 0MB 5: 0MB
689[ 42.234193] EDAC amd64: MC: 6: 1024MB 7: 1024MB
690[ 42.238992] EDAC amd64: using x4 syndromes.
691[ 42.243322] EDAC amd64: MCT channel count: 2
692[ 42.247776] EDAC amd64: CS6: Registered DDR2 RAM
693[ 42.252544] EDAC amd64: CS7: Registered DDR2 RAM
694[ 42.257912] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
695[ 42.267841] EDAC amd64: DRAM ECC enabled.
696[ 42.271944] EDAC amd64: F10h detected (node 1).
697[ 42.276613] EDAC MC: DCT0 chip selects:
698[ 42.276617] EDAC amd64: MC: 0: 1024MB 1: 0MB
699[ 42.281393] EDAC amd64: MC: 2: 0MB 3: 0MB
700[ 42.286232] EDAC amd64: MC: 4: 0MB 5: 0MB
701[ 42.290981] EDAC amd64: MC: 6: 0MB 7: 0MB
702[ 42.295832] EDAC MC: DCT1 chip selects:
703[ 42.295836] EDAC amd64: MC: 0: 0MB 1: 0MB
704[ 42.301964] EDAC amd64: MC: 2: 0MB 3: 0MB
705[ 42.308061] EDAC amd64: MC: 4: 0MB 5: 0MB
706[ 42.314116] EDAC amd64: MC: 6: 0MB 7: 0MB
707[ 42.318908] EDAC amd64: using x4 syndromes.
708[ 42.323177] EDAC amd64: MCT channel count: 1
709[ 42.327620] EDAC amd64: CS0: Registered DDR2 RAM
710[ 42.332730] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
711[ 42.342631] sata_nv 0000:00:07.0: version 3.5
712[ 42.342650] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
713[ 42.343043] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
714[ 42.343890] scsi0 : sata_nv
715[ 42.362720] scsi1 : sata_nv
716[ 42.365876] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
717[ 42.373136] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
718[ 42.380901] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
719[ 42.387303] scsi2 : sata_nv
720[ 42.390457] scsi3 : sata_nv
721[ 42.393577] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
722[ 42.400908] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
723[ 42.408407] pata_amd 0000:00:06.0: version 0.4.1
724[ 42.409283] scsi4 : pata_amd
725[ 42.412523] scsi5 : pata_amd
726[ 42.415623] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
727[ 42.422706] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
728[ 42.689429] ata1: SATA link down (SStatus 0 SControl 300)
729[ 42.717413] ata3: SATA link down (SStatus 0 SControl 300)
730[ 42.933368] kvm: Nested Virtualization enabled
731[ 42.937912] kvm: Nested Paging enabled
732[ 43.005318] ata2: SATA link down (SStatus 0 SControl 300)
733[ 43.321204] ata4: SATA link down (SStatus 0 SControl 300)
734[ 81.029406] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****