Gitiles
Code Review Sign In
review.coreboot.org / board-status / f0c508b2f7394ec2ebaf42ed5f7a0bd316ff5e6b / . / asus / kfsn4-dre / 4.1-299-gb95fc30 / 2015-08-17T22:55:49Z / kernel_log.txt
blob: 8f595683d8a9cb3b5e411c0d772563861c66211d [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand77c9daa2015-08-17 23:42:34 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.1-299-gb95fc30-dirty 08/17/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB7870 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7940 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7AB8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7AF0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B30 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
91[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
93[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
95[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
96[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
97[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
98[ 0.000000] Zone ranges:
99[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
100[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
101[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
102[ 0.000000] Movable zone start for each node
103[ 0.000000] Early memory node ranges
104[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
105[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
106[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
107[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
108[ 0.000000] On node 0 totalpages: 1048377
109[ 0.000000] DMA zone: 56 pages used for memmap
110[ 0.000000] DMA zone: 21 pages reserved
111[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
112[ 0.000000] DMA32 zone: 10695 pages used for memmap
113[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
114[ 0.000000] Normal zone: 3584 pages used for memmap
115[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
116[ 0.000000] On node 1 totalpages: 262144
117[ 0.000000] Normal zone: 3584 pages used for memmap
118[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
119[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
120[ 0.000000] ACPI: Local APIC address 0xfee00000
121[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
137[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
138[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
139[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
142[ 0.000000] ACPI: IRQ9 used by override.
143[ 0.000000] ACPI: IRQ14 used by override.
144[ 0.000000] ACPI: IRQ15 used by override.
145[ 0.000000] Using ACPI (MADT) for SMP configuration information
146[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
147[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
148[ 0.000000] nr_irqs_gsi: 40
149[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
150[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
152[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
154[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
155[ 0.000000] Booting paravirtualized kernel on bare hardware
156[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
157[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
158[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
159[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
160[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
161[ 0.000000] Policy zone: Normal
162[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
173[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [tty0] enabled
182[ 0.000000] console [ttyS0] enabled
183[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
184[ 0.000000] hpet clockevent registered
185[ 0.000000] tsc: Fast TSC calibration using PIT
186[ 0.000000] tsc: Detected 1909.644 MHz processor
187[ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.28 BogoMIPS (lpj=7638576)
188[ 0.010954] pid_max: default: 32768 minimum: 301
189[ 0.015675] ACPI: Core revision 20140424
190[ 0.022091] ACPI: All ACPI Tables successfully acquired
191[ 0.027609] Security Framework initialized
192[ 0.031788] AppArmor: AppArmor disabled by boot time parameter
193[ 0.037698] Yama: disabled by default; enable with sysctl kernel.yama.*
194[ 0.045509] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
195[ 0.058776] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
196[ 0.068583] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.075592] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
198[ 0.083542] Initializing cgroup subsys memory
199[ 0.088003] Initializing cgroup subsys devices
200[ 0.092554] Initializing cgroup subsys freezer
201[ 0.097078] Initializing cgroup subsys net_cls
202[ 0.101638] Initializing cgroup subsys blkio
203[ 0.105995] Initializing cgroup subsys perf_event
204[ 0.110792] Initializing cgroup subsys net_prio
205[ 0.115449] tseg: 0000000000
206[ 0.115463] CPU: Physical Processor ID: 0
207[ 0.119583] CPU: Processor Core ID: 0
208[ 0.124386] mce: CPU supports 6 MCE banks
209[ 0.128532] LVT offset 0 assigned for vector 0xf9
210[ 0.133323] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
211Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
212tlb_flushall_shift: 6
213[ 0.148801] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
214[ 0.157936] ftrace: allocating 21601 entries in 85 pages
215[ 0.173400] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
216[ 0.219036] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
217[ 0.336309] Performance Events: AMD PMU driver.
218[ 0.341022] ... version: 0
219[ 0.345119] ... bit width: 48
220[ 0.349304] ... generic registers: 4
221[ 0.353392] ... value mask: 0000ffffffffffff
222[ 0.358803] ... max period: 00007fffffffffff
223[ 0.364199] ... fixed-purpose events: 0
224[ 0.368303] ... event mask: 000000000000000f
225[ 0.376330] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
226[ 0.384670] x86: Booting SMP configuration:
227[ 0.388938] .... node #0, CPUs: #1 #2 #3
228[ 0.433511] .... node #1, CPUs: #4 #5 #6 #7
229[ 0.585088] x86: Booted up 2 nodes, 8 CPUs
230[ 0.589525] smpboot: Total of 8 processors activated (30556.36 BogoMIPS)
231[ 0.602117] devtmpfs: initialized
232[ 0.614117] pinctrl core: initialized pinctrl subsystem
233[ 0.619596] NET: Registered protocol family 16
234[ 0.624341] cpuidle: using governor ladder
235[ 0.628521] cpuidle: using governor menu
236[ 0.632529] node 0 link 1: io port [1000, 3fff]
237[ 0.632532] TOM: 00000000c0000000 aka 3072M
238[ 0.636794] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
239[ 0.636798] node 0 link 1: mmio [fc000000, fc3fffff]
240[ 0.636801] node 0 link 1: mmio [f8000000, fbffffff]
241[ 0.636804] TOM2: 0000000180000000 aka 6144M
242[ 0.641152] bus: [bus 00-05] on node 0 link 1
243[ 0.641154] bus: 00 [io 0x0000-0xffff]
244[ 0.641156] bus: 00 [mem 0xd0000000-0xffffffff]
245[ 0.641157] bus: 00 [mem 0x180000000-0xfcffffffff]
246[ 0.641262] ACPI: bus type PCI registered
247[ 0.645347] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
248[ 0.652027] PCI: Using configuration type 1 for base access
249[ 0.657668] PCI: Using configuration type 1 for extended access
250[ 0.664288] mtrr: your CPUs had inconsistent variable MTRR settings
251[ 0.670643] mtrr: probably your BIOS does not setup all CPUs.
252[ 0.676468] mtrr: corrected configuration.
253[ 0.693207] ACPI: Added _OSI(Module Device)
254[ 0.697507] ACPI: Added _OSI(Processor Device)
255[ 0.702031] ACPI: Added _OSI(3.0 _SCP Extensions)
256[ 0.706814] ACPI: Added _OSI(Processor Aggregator Device)
257[ 0.715844] ACPI: Interpreter enabled
258[ 0.719585] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
259[ 0.729028] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
260[ 0.738467] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
261[ 0.747921] ACPI: (supports S0 S1 S5)
262[ 0.751675] ACPI: Using IOAPIC for interrupt routing
263[ 0.756755] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
264[ 0.784130] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
265[ 0.790405] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
266[ 0.798729] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
267[ 0.837433] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
268[ 0.847575] PCI host bridge to bus 0000:00
269[ 0.851759] pci_bus 0000:00: root bus resource [bus 00-05]
270[ 0.857335] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
271[ 0.863606] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
272[ 0.870577] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
273[ 0.877537] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
274[ 0.883814] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
275[ 0.883996] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
276[ 0.884004] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
277[ 0.884143] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
278[ 0.884151] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
279[ 0.884175] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
280[ 0.884179] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
281[ 0.884215] pci 0000:00:01.1: PME# supported from D3hot D3cold
282[ 0.884316] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
283[ 0.884330] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
284[ 0.884356] pci 0000:00:02.0: supports D1 D2
285[ 0.884368] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.884428] pci 0000:00:02.0: System wakeup disabled by ACPI
287[ 0.890247] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
288[ 0.890261] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
289[ 0.890302] pci 0000:00:02.1: supports D1 D2
290[ 0.890305] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.890353] pci 0000:00:02.1: System wakeup disabled by ACPI
292[ 0.896164] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
293[ 0.896195] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
294[ 0.896207] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
295[ 0.903426] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
296[ 0.910042] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
297[ 0.917275] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
298[ 0.923988] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
299[ 0.923999] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
300[ 0.924003] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
301[ 0.924008] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
302[ 0.924013] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
303[ 0.924017] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
304[ 0.924022] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
305[ 0.924176] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
306[ 0.924184] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
307[ 0.924188] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
308[ 0.924193] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
309[ 0.924197] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
310[ 0.924202] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
311[ 0.924207] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
312[ 0.924366] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
313[ 0.924451] pci 0000:00:09.0: System wakeup disabled by ACPI
314[ 0.930245] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
315[ 0.930294] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.930345] pci 0000:00:0b.0: System wakeup disabled by ACPI
317[ 0.936144] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
318[ 0.936185] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.936232] pci 0000:00:0c.0: System wakeup disabled by ACPI
320[ 0.942048] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
321[ 0.942087] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.942151] pci 0000:00:0d.0: System wakeup disabled by ACPI
323[ 0.947955] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
324[ 0.947999] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.948056] pci 0000:00:0e.0: System wakeup disabled by ACPI
326[ 0.953881] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
327[ 0.954052] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
328[ 0.954170] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
329[ 0.954290] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
330[ 0.954432] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
331[ 0.954586] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
332[ 0.954738] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
333[ 0.954860] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
334[ 0.954999] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
335[ 0.955157] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
336[ 0.955356] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
337[ 0.955381] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
338[ 0.955399] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
339[ 0.955408] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
340[ 0.955444] pci 0000:01:04.0: supports D1 D2
341[ 0.955558] pci 0000:00:09.0: PCI bridge to [bus 01]
342[ 0.960627] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
343[ 0.960630] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
344[ 0.960633] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
345[ 0.960732] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.960761] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
347[ 0.960797] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
348[ 0.960877] pci 0000:02:00.0: PME# supported from D3hot D3cold
349[ 0.960955] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.971077] pci 0000:00:0b.0: PCI bridge to [bus 02]
351[ 0.976135] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
352[ 0.976230] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
353[ 0.976255] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
354[ 0.976375] pci 0000:03:00.0: PME# supported from D3hot D3cold
355[ 0.976483] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
356[ 0.986610] pci 0000:00:0c.0: PCI bridge to [bus 03]
357[ 0.991661] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
358[ 0.991731] pci 0000:00:0d.0: PCI bridge to [bus 04]
359[ 0.996868] pci 0000:00:0e.0: PCI bridge to [bus 05]
360[ 1.001943] pci_bus 0000:00: on NUMA node 0
361[ 1.002045] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
362[ 1.008478] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
363[ 1.014922] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
364[ 1.022579] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
365[ 1.030237] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
366[ 1.037900] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
367[ 1.045549] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
368[ 1.051961] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
369[ 1.058391] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
370[ 1.066041] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.073707] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
372[ 1.081341] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
373[ 1.087771] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
374[ 1.094205] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
375[ 1.101852] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
376[ 1.109494] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
377[ 1.117161] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
378[ 1.126260] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
379[ 1.132982] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
380[ 1.139694] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
381[ 1.146411] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
382[ 1.153392] ACPI: Enabled 1 GPEs in block 00 to 1F
383[ 1.158640] vgaarb: setting as boot device: PCI:0000:01:04.0
384[ 1.164436] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
385[ 1.172626] vgaarb: loaded
386[ 1.175423] vgaarb: bridge control possible 0000:01:04.0
387[ 1.180972] PCI: Using ACPI for IRQ routing
388[ 1.185251] PCI: pci_cache_line_size set to 64 bytes
389[ 1.185308] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
390[ 1.185311] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
391[ 1.185641] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
392[ 1.192779] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
393[ 1.198065] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
394[ 1.206801] Switched to clocksource hpet
395[ 1.222469] pnp: PnP ACPI init
396[ 1.225698] ACPI: bus type PNP registered
397[ 1.230312] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 1.230398] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
399[ 1.230481] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
400[ 1.230576] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.230614] pnp 00:04: [dma 2]
402[ 1.230660] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
403[ 1.230683] pnp: PnP ACPI: found 5 devices
404[ 1.234863] ACPI: bus type PNP unregistered
405[ 1.246910] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
406[ 1.257002] pci 0000:00:09.0: PCI bridge to [bus 01]
407[ 1.262048] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
408[ 1.268219] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
409[ 1.275095] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
410[ 1.282437] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
411[ 1.289797] pci 0000:00:0b.0: PCI bridge to [bus 02]
412[ 1.294847] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
413[ 1.301724] pci 0000:00:0c.0: PCI bridge to [bus 03]
414[ 1.306770] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
415[ 1.313644] pci 0000:00:0d.0: PCI bridge to [bus 04]
416[ 1.318709] pci 0000:00:0e.0: PCI bridge to [bus 05]
417[ 1.323761] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
418[ 1.323763] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
419[ 1.323766] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
420[ 1.323768] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7]
421[ 1.323772] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
422[ 1.323774] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
423[ 1.323777] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
424[ 1.323780] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
425[ 1.323783] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
426[ 1.323927] NET: Registered protocol family 2
427[ 1.328890] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
428[ 1.336713] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
429[ 1.344135] TCP: Hash tables configured (established 65536 bind 65536)
430[ 1.350845] TCP: reno registered
431[ 1.354162] UDP hash table entries: 4096 (order: 5, 131072 bytes)
432[ 1.360460] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
433[ 1.367314] NET: Registered protocol family 1
434[ 1.372153] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
435[ 1.378343] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
436[ 1.384312] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.389933] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.395510] pci 0000:00:0b.0: Found disabled HT MSI Mapping
439[ 1.401172] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.406776] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.412376] pci 0000:00:0c.0: Found disabled HT MSI Mapping
442[ 1.418033] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.423648] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.429235] pci 0000:00:0d.0: Found disabled HT MSI Mapping
445[ 1.434891] pci 0000:00:00.0: Found enabled HT MSI Mapping
446[ 1.440510] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.446100] pci 0000:00:0e.0: Found disabled HT MSI Mapping
448[ 1.451754] pci 0000:00:00.0: Found enabled HT MSI Mapping
449[ 1.457346] pci 0000:01:04.0: Video device with shadowed ROM
450[ 1.457354] PCI: CLS 64 bytes, default 64
451[ 1.457462] Unpacking initramfs...
452[ 1.690258] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
453[ 1.698211] PCI-DMA: Disabling AGP.
454[ 1.703455] PCI-DMA: aperture base @ b4000000 size 65536 KB
455[ 1.709123] PCI-DMA: using GART IOMMU.
456[ 1.712952] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
457[ 1.725416] platform rtc_cmos: registered platform RTC device (no PNP device found)
458[ 1.733750] microcode: CPU0: patch_level=0x01000096
459[ 1.738742] microcode: CPU1: patch_level=0x01000096
460[ 1.743758] microcode: CPU2: patch_level=0x01000096
461[ 1.748770] microcode: CPU3: patch_level=0x01000096
462[ 1.753779] microcode: CPU4: patch_level=0x01000096
463[ 1.758779] microcode: CPU5: patch_level=0x01000096
464[ 1.763771] microcode: CPU6: patch_level=0x01000096
465[ 1.769843] microcode: CPU7: patch_level=0x01000096
466[ 1.774924] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
467[ 1.783862] LVT offset 1 assigned for vector 0x400
468[ 1.788763] IBS: LVT offset 1 assigned
469[ 1.792643] perf: AMD IBS detected (0x00000007)
470[ 1.797876] futex hash table entries: 2048 (order: 5, 131072 bytes)
471[ 1.804350] audit: initializing netlink subsys (disabled)
472[ 1.809865] audit: type=2000 audit(1439854424.624:1): initialized
473[ 1.816823] HugeTLB registered 2 MB page size, pre-allocated 0 pages
474[ 1.823321] zbud: loaded
475[ 1.826278] VFS: Disk quotas dquot_6.5.2
476[ 1.830337] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
477[ 1.836971] msgmni has been set to 9945
478[ 1.841425] alg: No test for stdrng (krng)
479[ 1.845715] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
480[ 1.853367] io scheduler noop registered
481[ 1.857384] io scheduler deadline registered
482[ 1.861826] io scheduler cfq registered (default)
483[ 1.866841] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
484[ 1.866968] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
485[ 1.867082] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
486[ 1.867194] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
487[ 1.867362] aer 0000:00:0b.0:pcie02: service driver aer loaded
488[ 1.867389] aer 0000:00:0c.0:pcie02: service driver aer loaded
489[ 1.867415] aer 0000:00:0d.0:pcie02: service driver aer loaded
490[ 1.867441] aer 0000:00:0e.0:pcie02: service driver aer loaded
491[ 1.867463] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
492[ 1.874568] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
493[ 1.881207] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
494[ 1.881218] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
495[ 1.888261] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
496[ 1.894879] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
497[ 1.894889] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
498[ 1.901932] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
499[ 1.901942] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
500[ 1.908984] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
501[ 1.909016] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
502[ 1.914711] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
503[ 1.921545] GHES: HEST is not enabled!
504[ 1.925507] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
505[ 1.952295] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
506[ 1.980083] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
507[ 1.988095] Linux agpgart interface v0.103
508[ 1.992506] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
509[ 2.003072] serio: i8042 KBD port at 0x60,0x64 irq 1
510[ 2.008197] serio: i8042 AUX port at 0x60,0x64 irq 12
511[ 2.013529] mousedev: PS/2 mouse device common for all mice
512[ 2.019320] rtc_cmos rtc_cmos: RTC can wake from S4
513[ 2.024531] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
514[ 2.031027] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
515[ 2.039000] ledtrig-cpu: registered to indicate activity on CPUs
516[ 2.045284] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
517[ 2.051825] AMD IOMMUv2 functionality not available on this system
518[ 2.058250] TCP: cubic registered
519[ 2.061791] NET: Registered protocol family 10
520[ 2.066758] mip6: Mobile IPv6
521[ 2.069834] NET: Registered protocol family 17
522[ 2.074449] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
523[ 2.083201] mpls_gso: MPLS GSO support
524[ 2.087950] registered taskstats version 1
525[ 2.092911] rtc_cmos rtc_cmos: setting system clock to 2015-08-17 23:33:46 UTC (1439854426)
526[ 2.101497] PM: Hibernation image not present or could not be loaded.
527[ 2.103319] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
528[ 2.111313] Write protecting the kernel read-only data: 8192k
529[ 2.120681] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
530[ 2.129419] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
531[ 2.153396] systemd-udevd[99]: starting version 215
532[ 2.159237] random: systemd-udevd urandom read with 3 bits of entropy available
533[ 2.189345] ACPI: bus type USB registered
534[ 2.193639] usbcore: registered new interface driver usbfs
535[ 2.199288] usbcore: registered new interface driver hub
536[ 2.204892] usbcore: registered new device driver usb
537[ 2.204962] pps_core: LinuxPPS API ver. 1 registered
538[ 2.204963] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
539[ 2.224939] PTP clock support registered
540[ 2.229265] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
541[ 2.236392] tg3.c:v3.137 (May 11, 2014)
542[ 2.240362] tg3 0000:02:00.0: enabling device (0004 -> 0006)
543[ 2.246355] ehci-pci: EHCI PCI platform driver
544[ 2.246400] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
545[ 2.256955] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
546[ 2.257022] ehci-pci 0000:00:02.1: EHCI Host Controller
547[ 2.257041] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
548[ 2.257057] ehci-pci 0000:00:02.1: debug port 1
549[ 2.257101] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
550[ 2.257127] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
551[ 2.266456] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
552[ 2.266536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
553[ 2.266538] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
554[ 2.266539] usb usb1: Product: EHCI Host Controller
555[ 2.266541] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
556[ 2.266542] usb usb1: SerialNumber: 0000:00:02.1
557[ 2.266756] hub 1-0:1.0: USB hub found
558[ 2.266765] hub 1-0:1.0: 10 ports detected
559[ 2.330839] ohci-pci: OHCI PCI platform driver
560[ 2.335619] ohci-pci 0000:00:02.0: OHCI PCI host controller
561[ 2.341320] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
562[ 2.348892] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
563[ 2.381589] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
564[ 2.392042] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
565[ 2.401896] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
566[ 2.409835] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
567[ 2.412473] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
568[ 2.412476] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
569[ 2.412477] usb usb2: Product: OHCI PCI host controller
570[ 2.412478] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
571[ 2.412480] usb usb2: SerialNumber: 0000:00:02.0
572[ 2.412755] hub 2-0:1.0: USB hub found
573[ 2.412767] hub 2-0:1.0: 10 ports detected
574[ 2.455056] tg3 0000:03:00.0: enabling device (0004 -> 0006)
575[ 2.461019] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
576[ 2.506928] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
577[ 2.517388] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
578[ 2.527238] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
579[ 2.535181] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
580[ 2.549216] FS-Cache: Loaded
581[ 2.555828] RPC: Registered named UNIX socket transport module.
582[ 2.562485] RPC: Registered udp transport module.
583[ 2.568545] RPC: Registered tcp transport module.
584[ 2.574711] RPC: Registered tcp NFSv4.1 backchannel transport module.
585[ 2.587159] FS-Cache: Netfs 'nfs' registered for caching
586[ 2.605041] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
587[ 2.650426] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
588[ 2.722300] tsc: Refined TSC clocksource calibration: 1909.787 MHz
589[ 3.726054] Switched to clocksource tsc
590[ 4.256128] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
591[ 4.262812] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
592[ 4.269779] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
593[ 7.339530] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
594[ 7.353700] systemd[1]: Detected architecture 'x86-64'.
595[ 8.594788] systemd[1]: Inserted module 'autofs4'
596[ 8.605451] systemd[1]: Set hostname to <cb-test-tgt>.
597[ 8.895692] random: nonblocking pool is initialized
598[ 10.386887] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
599[ 10.399779] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
600[ 10.415293] systemd[1]: Expecting device dev-ttyS0.device...
601[ 10.431764] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
602[ 10.439717] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
603[ 10.447437] systemd[1]: Starting Remote File Systems (Pre).
604[ 10.463679] systemd[1]: Reached target Remote File Systems (Pre).
605[ 10.469926] systemd[1]: Starting Encrypted Volumes.
606[ 10.483656] systemd[1]: Reached target Encrypted Volumes.
607[ 10.489210] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
608[ 10.497388] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
609[ 10.505449] systemd[1]: Starting Paths.
610[ 10.519637] systemd[1]: Reached target Paths.
611[ 10.524166] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
612[ 10.547629] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
613[ 10.557211] systemd[1]: Starting Swap.
614[ 10.571701] systemd[1]: Reached target Swap.
615[ 10.576153] systemd[1]: Starting Root Slice.
616[ 10.587614] systemd[1]: Created slice Root Slice.
617[ 10.592456] systemd[1]: Starting User and Session Slice.
618[ 10.607601] systemd[1]: Created slice User and Session Slice.
619[ 10.613464] systemd[1]: Starting Delayed Shutdown Socket.
620[ 10.627606] systemd[1]: Listening on Delayed Shutdown Socket.
621[ 10.633489] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
622[ 10.651588] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
623[ 10.658694] systemd[1]: Starting Journal Socket (/dev/log).
624[ 10.675590] systemd[1]: Listening on Journal Socket (/dev/log).
625[ 10.681686] systemd[1]: Starting udev Kernel Socket.
626[ 10.695654] systemd[1]: Listening on udev Kernel Socket.
627[ 10.702245] systemd[1]: Starting udev Control Socket.
628[ 10.719564] systemd[1]: Listening on udev Control Socket.
629[ 10.725104] systemd[1]: Starting Journal Socket.
630[ 10.739553] systemd[1]: Listening on Journal Socket.
631[ 10.744670] systemd[1]: Starting System Slice.
632[ 10.759545] systemd[1]: Created slice System Slice.
633[ 10.764545] systemd[1]: Starting system-getty.slice.
634[ 10.779555] systemd[1]: Created slice system-getty.slice.
635[ 10.785102] systemd[1]: Starting system-serial\x2dgetty.slice.
636[ 10.799545] systemd[1]: Created slice system-serial\x2dgetty.slice.
637[ 10.805974] systemd[1]: Starting Increase datagram queue length...
638[ 10.825073] systemd[1]: Mounting Debug File System...
639[ 10.840937] systemd[1]: Mounting POSIX Message Queue File System...
640[ 10.930577] systemd[1]: Starting Load Kernel Modules...
641[ 12.154268] systemd[1]: Started Set Up Additional Binary Formats.
642[ 12.165481] systemd[1]: Starting Create list of required static device nodes for the current kernel...
643[ 12.188675] systemd[1]: Starting udev Coldplug all Devices...
644[ 12.204701] systemd[1]: Mounting Huge Pages File System...
645[ 12.220553] systemd[1]: Starting Slices.
646[ 12.235054] systemd[1]: Reached target Slices.
647[ 12.239903] systemd[1]: Starting Remount Root and Kernel File Systems...
648[ 12.271101] systemd[1]: Started Increase datagram queue length.
649[ 12.277945] systemd[1]: Starting Syslog Socket.
650[ 12.291066] systemd[1]: Listening on Syslog Socket.
651[ 12.296097] systemd[1]: Starting Sockets.
652[ 12.311087] systemd[1]: Reached target Sockets.
653[ 12.315809] systemd[1]: Starting Journal Service...
654[ 12.343098] systemd[1]: Started Journal Service.
655[ 14.850001] systemd-journald[171]: Received request to flush runtime journal from PID 1
656[ 14.851226] systemd-udevd[189]: starting version 215
657[ 23.361592] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
658[ 23.369578] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
659[ 23.900831] EDAC MC: Ver: 3.0.0
660[ 24.476822] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
661[ 24.485332] ACPI: Power Button [PWRB]
662[ 24.489164] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
663[ 24.496693] ACPI: Power Button [PWRF]
664[ 24.583272] MCE: In-kernel MCE decoding enabled.
665[ 24.621578] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
666[ 24.898631] FDC 0 is a post-1991 82077
667[ 25.131739] SCSI subsystem initialized
668[ 25.211515] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
669[ 25.216840] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
670[ 25.258504] AMD64 EDAC driver v3.4.0
671[ 25.262238] EDAC amd64: DRAM ECC enabled.
672[ 25.266342] EDAC amd64: F10h detected (node 0).
673[ 25.271004] EDAC MC: DCT0 chip selects:
674[ 25.271007] EDAC amd64: MC: 0: 0MB 1: 0MB
675[ 25.275804] EDAC amd64: MC: 2: 0MB 3: 0MB
676[ 25.280599] EDAC amd64: MC: 4: 0MB 5: 0MB
677[ 25.285394] EDAC amd64: MC: 6: 1024MB 7: 1024MB
678[ 25.290185] EDAC MC: DCT1 chip selects:
679[ 25.290187] EDAC amd64: MC: 0: 0MB 1: 0MB
680[ 25.294987] EDAC amd64: MC: 2: 0MB 3: 0MB
681[ 25.299785] EDAC amd64: MC: 4: 0MB 5: 0MB
682[ 25.304566] EDAC amd64: MC: 6: 1024MB 7: 1024MB
683[ 25.309358] EDAC amd64: using x4 syndromes.
684[ 25.313633] EDAC amd64: MCT channel count: 2
685[ 25.318027] EDAC amd64: CS6: Registered DDR2 RAM
686[ 25.322741] EDAC amd64: CS7: Registered DDR2 RAM
687[ 25.327668] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
688[ 25.338854] EDAC amd64: DRAM ECC enabled.
689[ 25.344159] EDAC amd64: F10h detected (node 1).
690[ 25.350123] EDAC MC: DCT0 chip selects:
691[ 25.350125] EDAC amd64: MC: 0: 1024MB 1: 0MB
692[ 25.356170] EDAC amd64: MC: 2: 0MB 3: 0MB
693[ 25.362269] EDAC amd64: MC: 4: 0MB 5: 0MB
694[ 25.368380] EDAC amd64: MC: 6: 0MB 7: 0MB
695[ 25.374034] EDAC MC: DCT1 chip selects:
696[ 25.374035] EDAC amd64: MC: 0: 0MB 1: 0MB
697[ 25.378828] EDAC amd64: MC: 2: 0MB 3: 0MB
698[ 25.383626] EDAC amd64: MC: 4: 0MB 5: 0MB
699[ 25.388428] EDAC amd64: MC: 6: 0MB 7: 0MB
700[ 25.393233] EDAC amd64: using x4 syndromes.
701[ 25.397511] EDAC amd64: MCT channel count: 1
702[ 25.401927] EDAC amd64: CS0: Registered DDR2 RAM
703[ 25.406811] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
704[ 25.416680] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
705[ 25.718187] libata version 3.00 loaded.
706[ 25.738458] acpi-cpufreq: overriding BIOS provided _PSD data
707[ 25.761384] input: PC Speaker as /devices/platform/pcspkr/input/input4
708[ 25.984952] pata_amd 0000:00:06.0: version 0.4.1
709[ 25.985877] scsi0 : pata_amd
710[ 25.989256] scsi1 : pata_amd
711[ 25.992372] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
712[ 25.999450] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
713[ 26.399400] sata_nv 0000:00:07.0: version 3.5
714[ 26.399848] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
715[ 26.406596] scsi2 : sata_nv
716[ 26.409730] scsi3 : sata_nv
717[ 26.412806] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
718[ 26.420036] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
719[ 26.427480] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
720[ 26.434109] scsi4 : sata_nv
721[ 26.437212] scsi5 : sata_nv
722[ 26.440200] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
723[ 26.447431] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
724[ 26.512693] kvm: Nested Virtualization enabled
725[ 26.517303] kvm: Nested Paging enabled
726[ 26.738012] ata3: SATA link down (SStatus 0 SControl 300)
727[ 26.766006] ata5: SATA link down (SStatus 0 SControl 300)
728[ 27.053901] ata4: SATA link down (SStatus 0 SControl 300)
729[ 27.369794] ata6: SATA link down (SStatus 0 SControl 300)
730[ 65.442325] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
731[ 269.979965] nfs: server 10.100.1.1 not responding, still trying
732[ 270.284097] nfs: server 10.100.1.1 OK