Gitiles
Code Review Sign In
review.coreboot.org / board-status / f0c508b2f7394ec2ebaf42ed5f7a0bd316ff5e6b / . / asus / kfsn4-dre / 4.1-177-g11f1d31 / 2015-08-06T03:51:57Z / kernel_log.txt
blob: 40dd5e930c0cfc28a7d7862a3717c1a7fb05ac1a [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand899ca0a2015-08-06 22:37:39 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.1-177-g11f1d31-dirty 08/06/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4250 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4210 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69A0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7800 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB7840 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7910 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7A88 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7AC0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B00 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7C78 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
91[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
93[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
95[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
96[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
97[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
98[ 0.000000] Zone ranges:
99[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
100[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
101[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
102[ 0.000000] Movable zone start for each node
103[ 0.000000] Early memory node ranges
104[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
105[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
106[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
107[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
108[ 0.000000] On node 0 totalpages: 1048377
109[ 0.000000] DMA zone: 56 pages used for memmap
110[ 0.000000] DMA zone: 21 pages reserved
111[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
112[ 0.000000] DMA32 zone: 10695 pages used for memmap
113[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
114[ 0.000000] Normal zone: 3584 pages used for memmap
115[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
116[ 0.000000] On node 1 totalpages: 262144
117[ 0.000000] Normal zone: 3584 pages used for memmap
118[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
119[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
120[ 0.000000] ACPI: Local APIC address 0xfee00000
121[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
137[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
138[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
139[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
142[ 0.000000] ACPI: IRQ9 used by override.
143[ 0.000000] ACPI: IRQ14 used by override.
144[ 0.000000] ACPI: IRQ15 used by override.
145[ 0.000000] Using ACPI (MADT) for SMP configuration information
146[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
147[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
148[ 0.000000] nr_irqs_gsi: 40
149[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
150[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
152[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
154[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
155[ 0.000000] Booting paravirtualized kernel on bare hardware
156[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
157[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
158[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
159[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
160[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
161[ 0.000000] Policy zone: Normal
162[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xf5fa000000-0xf5fbffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
173[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [tty0] enabled
182[ 0.000000] console [ttyS0] enabled
183[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
184[ 0.000000] hpet clockevent registered
185[ 0.000000] tsc: Fast TSC calibration using PIT
186[ 0.000000] tsc: Detected 1909.853 MHz processor
187[ 0.000159] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.70 BogoMIPS (lpj=7639412)
188[ 0.010954] pid_max: default: 32768 minimum: 301
189[ 0.015676] ACPI: Core revision 20140424
190[ 0.022080] ACPI: All ACPI Tables successfully acquired
191[ 0.027602] Security Framework initialized
192[ 0.031780] AppArmor: AppArmor disabled by boot time parameter
193[ 0.037690] Yama: disabled by default; enable with sysctl kernel.yama.*
194[ 0.045501] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
195[ 0.058799] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
196[ 0.068685] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.075722] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
198[ 0.083687] Initializing cgroup subsys memory
199[ 0.088149] Initializing cgroup subsys devices
200[ 0.092692] Initializing cgroup subsys freezer
201[ 0.097217] Initializing cgroup subsys net_cls
202[ 0.101761] Initializing cgroup subsys blkio
203[ 0.106116] Initializing cgroup subsys perf_event
204[ 0.110913] Initializing cgroup subsys net_prio
205[ 0.115579] tseg: 0000000000
206[ 0.115593] CPU: Physical Processor ID: 0
207[ 0.119713] CPU: Processor Core ID: 0
208[ 0.124516] mce: CPU supports 6 MCE banks
209[ 0.128635] LVT offset 0 assigned for vector 0xf9
210[ 0.133427] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
211Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
212tlb_flushall_shift: 6
213[ 0.148905] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
214[ 0.158041] ftrace: allocating 21601 entries in 85 pages
215[ 0.173491] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
216[ 0.219137] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
217[ 0.336303] Performance Events: AMD PMU driver.
218[ 0.341012] ... version: 0
219[ 0.345112] ... bit width: 48
220[ 0.349305] ... generic registers: 4
221[ 0.353403] ... value mask: 0000ffffffffffff
222[ 0.358804] ... max period: 00007fffffffffff
223[ 0.364208] ... fixed-purpose events: 0
224[ 0.368303] ... event mask: 000000000000000f
225[ 0.376326] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
226[ 0.384666] x86: Booting SMP configuration:
227[ 0.388940] .... node #0, CPUs: #1 #2 #3
228[ 0.433546] .... node #1, CPUs: #4 #5 #6 #7
229[ 0.585089] x86: Booted up 2 nodes, 8 CPUs
230[ 0.589526] smpboot: Total of 8 processors activated (30558.05 BogoMIPS)
231[ 0.602141] devtmpfs: initialized
232[ 0.614137] pinctrl core: initialized pinctrl subsystem
233[ 0.619609] NET: Registered protocol family 16
234[ 0.624349] cpuidle: using governor ladder
235[ 0.628530] cpuidle: using governor menu
236[ 0.632535] node 0 link 1: io port [1000, 3fff]
237[ 0.632539] TOM: 00000000c0000000 aka 3072M
238[ 0.636802] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
239[ 0.636806] node 0 link 1: mmio [fc000000, fc3fffff]
240[ 0.636810] node 0 link 1: mmio [f8000000, fbffffff]
241[ 0.636812] TOM2: 0000000180000000 aka 6144M
242[ 0.641159] bus: [bus 00-05] on node 0 link 1
243[ 0.641161] bus: 00 [io 0x0000-0xffff]
244[ 0.641163] bus: 00 [mem 0xd0000000-0xffffffff]
245[ 0.641165] bus: 00 [mem 0x180000000-0xfcffffffff]
246[ 0.641270] ACPI: bus type PCI registered
247[ 0.645356] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
248[ 0.652028] PCI: Using configuration type 1 for base access
249[ 0.657667] PCI: Using configuration type 1 for extended access
250[ 0.664281] mtrr: your CPUs had inconsistent variable MTRR settings
251[ 0.670645] mtrr: probably your BIOS does not setup all CPUs.
252[ 0.676467] mtrr: corrected configuration.
253[ 0.693238] ACPI: Added _OSI(Module Device)
254[ 0.697542] ACPI: Added _OSI(Processor Device)
255[ 0.702066] ACPI: Added _OSI(3.0 _SCP Extensions)
256[ 0.706848] ACPI: Added _OSI(Processor Aggregator Device)
257[ 0.715909] ACPI: Interpreter enabled
258[ 0.719663] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
259[ 0.729123] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
260[ 0.738578] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
261[ 0.748033] ACPI: (supports S0 S1 S5)
262[ 0.751775] ACPI: Using IOAPIC for interrupt routing
263[ 0.756867] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
264[ 0.785651] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
265[ 0.791920] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
266[ 0.800235] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
267[ 0.839419] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
268[ 0.849562] PCI host bridge to bus 0000:00
269[ 0.853750] pci_bus 0000:00: root bus resource [bus 00-05]
270[ 0.859323] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
271[ 0.865589] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
272[ 0.872556] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
273[ 0.879521] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
274[ 0.885804] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
275[ 0.885967] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
276[ 0.885975] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
277[ 0.886103] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
278[ 0.886114] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
279[ 0.886134] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
280[ 0.886144] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
281[ 0.886179] pci 0000:00:01.1: PME# supported from D3hot D3cold
282[ 0.886276] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
283[ 0.886290] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
284[ 0.886319] pci 0000:00:02.0: supports D1 D2
285[ 0.886338] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.886405] pci 0000:00:02.0: System wakeup disabled by ACPI
287[ 0.892226] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
288[ 0.892240] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
289[ 0.892282] pci 0000:00:02.1: supports D1 D2
290[ 0.892284] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.892333] pci 0000:00:02.1: System wakeup disabled by ACPI
292[ 0.898148] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
293[ 0.898189] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
294[ 0.898200] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
295[ 0.905428] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
296[ 0.912043] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
297[ 0.919271] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
298[ 0.926006] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
299[ 0.926016] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
300[ 0.926020] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
301[ 0.926025] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
302[ 0.926030] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
303[ 0.926034] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
304[ 0.926039] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
305[ 0.926181] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
306[ 0.926192] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
307[ 0.926202] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
308[ 0.926210] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
309[ 0.926215] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
310[ 0.926219] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
311[ 0.926224] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
312[ 0.926357] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
313[ 0.926456] pci 0000:00:09.0: System wakeup disabled by ACPI
314[ 0.932248] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
315[ 0.932297] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.932356] pci 0000:00:0b.0: System wakeup disabled by ACPI
317[ 0.938165] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
318[ 0.938218] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.938265] pci 0000:00:0c.0: System wakeup disabled by ACPI
320[ 0.944075] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
321[ 0.944122] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.944215] pci 0000:00:0d.0: System wakeup disabled by ACPI
323[ 0.950033] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
324[ 0.950071] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.950131] pci 0000:00:0e.0: System wakeup disabled by ACPI
326[ 0.955955] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
327[ 0.956120] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
328[ 0.956220] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
329[ 0.956398] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
330[ 0.956555] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
331[ 0.956673] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
332[ 0.956839] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
333[ 0.956945] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
334[ 0.957099] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
335[ 0.957253] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
336[ 0.957474] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
337[ 0.957499] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
338[ 0.957516] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
339[ 0.957533] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
340[ 0.957578] pci 0000:01:04.0: supports D1 D2
341[ 0.957698] pci 0000:00:09.0: PCI bridge to [bus 01]
342[ 0.962751] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
343[ 0.962754] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
344[ 0.962757] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
345[ 0.962856] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.962886] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
347[ 0.962921] pci 0000:02:00.0: reg 0x30: [mem 0x61c00000-0x61c0ffff pref]
348[ 0.963023] pci 0000:02:00.0: PME# supported from D3hot D3cold
349[ 0.963134] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.973270] pci 0000:00:0b.0: PCI bridge to [bus 02]
351[ 0.978328] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
352[ 0.978427] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
353[ 0.978461] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
354[ 0.978562] pci 0000:03:00.0: PME# supported from D3hot D3cold
355[ 0.978649] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
356[ 0.988785] pci 0000:00:0c.0: PCI bridge to [bus 03]
357[ 0.993828] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
358[ 0.993902] pci 0000:00:0d.0: PCI bridge to [bus 04]
359[ 0.999033] pci 0000:00:0e.0: PCI bridge to [bus 05]
360[ 1.004119] pci_bus 0000:00: on NUMA node 0
361[ 1.004222] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
362[ 1.010651] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
363[ 1.017098] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
364[ 1.024765] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
365[ 1.032422] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
366[ 1.040071] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
367[ 1.047724] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
368[ 1.054179] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
369[ 1.060629] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
370[ 1.068302] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.075948] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
372[ 1.083626] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
373[ 1.090061] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
374[ 1.096489] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
375[ 1.104210] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
376[ 1.111886] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
377[ 1.119557] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
378[ 1.128683] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
379[ 1.135413] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
380[ 1.142157] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
381[ 1.148892] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
382[ 1.155888] ACPI: Enabled 1 GPEs in block 00 to 1F
383[ 1.161144] vgaarb: setting as boot device: PCI:0000:01:04.0
384[ 1.166931] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
385[ 1.175131] vgaarb: loaded
386[ 1.177924] vgaarb: bridge control possible 0000:01:04.0
387[ 1.183501] PCI: Using ACPI for IRQ routing
388[ 1.187782] PCI: pci_cache_line_size set to 64 bytes
389[ 1.187839] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
390[ 1.187843] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
391[ 1.188171] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
392[ 1.195301] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
393[ 1.200611] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
394[ 1.209385] Switched to clocksource hpet
395[ 1.225062] pnp: PnP ACPI init
396[ 1.228288] ACPI: bus type PNP registered
397[ 1.232898] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 1.232985] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
399[ 1.233069] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
400[ 1.233163] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.233201] pnp 00:04: [dma 2]
402[ 1.233249] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
403[ 1.233271] pnp: PnP ACPI: found 5 devices
404[ 1.237455] ACPI: bus type PNP unregistered
405[ 1.249511] pci 0000:02:00.0: can't claim BAR 6 [mem 0x61c00000-0x61c0ffff pref]: no compatible bridge window
406[ 1.259606] pci 0000:00:09.0: PCI bridge to [bus 01]
407[ 1.264647] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
408[ 1.270818] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
409[ 1.277689] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
410[ 1.285027] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
411[ 1.292387] pci 0000:00:0b.0: PCI bridge to [bus 02]
412[ 1.297438] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
413[ 1.304314] pci 0000:00:0c.0: PCI bridge to [bus 03]
414[ 1.309359] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
415[ 1.316236] pci 0000:00:0d.0: PCI bridge to [bus 04]
416[ 1.321299] pci 0000:00:0e.0: PCI bridge to [bus 05]
417[ 1.326352] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
418[ 1.326355] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
419[ 1.326357] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
420[ 1.326360] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7]
421[ 1.326364] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
422[ 1.326366] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
423[ 1.326369] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
424[ 1.326371] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
425[ 1.326374] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
426[ 1.326504] NET: Registered protocol family 2
427[ 1.331468] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
428[ 1.339295] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
429[ 1.346715] TCP: Hash tables configured (established 65536 bind 65536)
430[ 1.353402] TCP: reno registered
431[ 1.356721] UDP hash table entries: 4096 (order: 5, 131072 bytes)
432[ 1.362990] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
433[ 1.369859] NET: Registered protocol family 1
434[ 1.374698] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
435[ 1.380881] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
436[ 1.386858] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.392471] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.398055] pci 0000:00:0b.0: Found disabled HT MSI Mapping
439[ 1.403705] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.409338] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.414920] pci 0000:00:0c.0: Found disabled HT MSI Mapping
442[ 1.420574] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.426194] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.431779] pci 0000:00:0d.0: Found disabled HT MSI Mapping
445[ 1.437432] pci 0000:00:00.0: Found enabled HT MSI Mapping
446[ 1.443050] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.448656] pci 0000:00:0e.0: Found disabled HT MSI Mapping
448[ 1.454311] pci 0000:00:00.0: Found enabled HT MSI Mapping
449[ 1.459919] pci 0000:01:04.0: Video device with shadowed ROM
450[ 1.459927] PCI: CLS 64 bytes, default 64
451[ 1.460034] Unpacking initramfs...
452[ 1.692978] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
453[ 1.700964] PCI-DMA: Disabling AGP.
454[ 1.706202] PCI-DMA: aperture base @ b4000000 size 65536 KB
455[ 1.711868] PCI-DMA: using GART IOMMU.
456[ 1.715708] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
457[ 1.728152] platform rtc_cmos: registered platform RTC device (no PNP device found)
458[ 1.736488] microcode: CPU0: patch_level=0x01000096
459[ 1.741489] microcode: CPU1: patch_level=0x01000096
460[ 1.746497] microcode: CPU2: patch_level=0x01000096
461[ 1.751509] microcode: CPU3: patch_level=0x01000096
462[ 1.756519] microcode: CPU4: patch_level=0x01000096
463[ 1.761517] microcode: CPU5: patch_level=0x01000096
464[ 1.766513] microcode: CPU6: patch_level=0x01000096
465[ 1.772615] microcode: CPU7: patch_level=0x01000096
466[ 1.777703] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
467[ 1.786647] LVT offset 1 assigned for vector 0x400
468[ 1.791544] IBS: LVT offset 1 assigned
469[ 1.795423] perf: AMD IBS detected (0x00000007)
470[ 1.800643] futex hash table entries: 2048 (order: 5, 131072 bytes)
471[ 1.807106] audit: initializing netlink subsys (disabled)
472[ 1.812624] audit: type=2000 audit(1438900205.628:1): initialized
473[ 1.819583] HugeTLB registered 2 MB page size, pre-allocated 0 pages
474[ 1.826086] zbud: loaded
475[ 1.829058] VFS: Disk quotas dquot_6.5.2
476[ 1.833115] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
477[ 1.839754] msgmni has been set to 9945
478[ 1.844220] alg: No test for stdrng (krng)
479[ 1.848508] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
480[ 1.856160] io scheduler noop registered
481[ 1.860186] io scheduler deadline registered
482[ 1.864634] io scheduler cfq registered (default)
483[ 1.869638] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
484[ 1.869765] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
485[ 1.869879] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
486[ 1.869989] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
487[ 1.870157] aer 0000:00:0b.0:pcie02: service driver aer loaded
488[ 1.870184] aer 0000:00:0c.0:pcie02: service driver aer loaded
489[ 1.870210] aer 0000:00:0d.0:pcie02: service driver aer loaded
490[ 1.870236] aer 0000:00:0e.0:pcie02: service driver aer loaded
491[ 1.870258] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
492[ 1.877358] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
493[ 1.883976] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
494[ 1.883986] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
495[ 1.891034] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
496[ 1.897642] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
497[ 1.897652] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
498[ 1.904696] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
499[ 1.904706] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
500[ 1.911748] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
501[ 1.911779] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
502[ 1.917483] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
503[ 1.924316] GHES: HEST is not enabled!
504[ 1.928282] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
505[ 1.955051] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
506[ 1.982823] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
507[ 1.990836] Linux agpgart interface v0.103
508[ 1.995246] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
509[ 2.005868] serio: i8042 KBD port at 0x60,0x64 irq 1
510[ 2.010980] serio: i8042 AUX port at 0x60,0x64 irq 12
511[ 2.016335] mousedev: PS/2 mouse device common for all mice
512[ 2.022141] rtc_cmos rtc_cmos: RTC can wake from S4
513[ 2.027357] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
514[ 2.033850] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
515[ 2.041835] ledtrig-cpu: registered to indicate activity on CPUs
516[ 2.048099] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
517[ 2.054613] AMD IOMMUv2 functionality not available on this system
518[ 2.061026] TCP: cubic registered
519[ 2.064564] NET: Registered protocol family 10
520[ 2.069546] mip6: Mobile IPv6
521[ 2.072608] NET: Registered protocol family 17
522[ 2.077222] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
523[ 2.085985] mpls_gso: MPLS GSO support
524[ 2.090720] registered taskstats version 1
525[ 2.095695] rtc_cmos rtc_cmos: setting system clock to 2015-08-06 22:30:07 UTC (1438900207)
526[ 2.104278] PM: Hibernation image not present or could not be loaded.
527[ 2.106103] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
528[ 2.114088] Write protecting the kernel read-only data: 8192k
529[ 2.123431] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
530[ 2.132160] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
531[ 2.156076] systemd-udevd[99]: starting version 215
532[ 2.161932] random: systemd-udevd urandom read with 4 bits of entropy available
533[ 2.191948] ACPI: bus type USB registered
534[ 2.196277] usbcore: registered new interface driver usbfs
535[ 2.201931] usbcore: registered new interface driver hub
536[ 2.207557] usbcore: registered new device driver usb
537[ 2.207565] pps_core: LinuxPPS API ver. 1 registered
538[ 2.207566] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
539[ 2.227611] PTP clock support registered
540[ 2.231938] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
541[ 2.238932] tg3.c:v3.137 (May 11, 2014)
542[ 2.242922] tg3 0000:02:00.0: enabling device (0004 -> 0006)
543[ 2.248843] ehci-pci: EHCI PCI platform driver
544[ 2.248961] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
545[ 2.259538] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
546[ 2.259578] ehci-pci 0000:00:02.1: EHCI Host Controller
547[ 2.259595] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
548[ 2.259615] ehci-pci 0000:00:02.1: debug port 1
549[ 2.259660] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
550[ 2.259691] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
551[ 2.269046] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
552[ 2.269119] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
553[ 2.269120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
554[ 2.269122] usb usb1: Product: EHCI Host Controller
555[ 2.269123] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
556[ 2.269124] usb usb1: SerialNumber: 0000:00:02.1
557[ 2.269438] hub 1-0:1.0: USB hub found
558[ 2.269450] hub 1-0:1.0: 10 ports detected
559[ 2.333414] ohci-pci: OHCI PCI platform driver
560[ 2.338197] ohci-pci 0000:00:02.0: OHCI PCI host controller
561[ 2.343949] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
562[ 2.351511] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
563[ 2.356512] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
564[ 2.356515] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
565[ 2.356517] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
566[ 2.356518] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
567[ 2.356657] tg3 0000:03:00.0: enabling device (0004 -> 0006)
568[ 2.356813] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
569[ 2.441524] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
570[ 2.451951] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
571[ 2.459040] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
572[ 2.459042] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
573[ 2.459044] usb usb2: Product: OHCI PCI host controller
574[ 2.459045] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
575[ 2.459046] usb usb2: SerialNumber: 0000:00:02.0
576[ 2.459243] hub 2-0:1.0: USB hub found
577[ 2.459254] hub 2-0:1.0: 10 ports detected
578[ 2.500132] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
579[ 2.508116] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
580[ 2.522370] FS-Cache: Loaded
581[ 2.528960] RPC: Registered named UNIX socket transport module.
582[ 2.535593] RPC: Registered udp transport module.
583[ 2.541657] RPC: Registered tcp transport module.
584[ 2.547773] RPC: Registered tcp NFSv4.1 backchannel transport module.
585[ 2.560256] FS-Cache: Netfs 'nfs' registered for caching
586[ 2.578514] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
587[ 2.625006] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
588[ 2.724877] tsc: Refined TSC clocksource calibration: 1909.786 MHz
589[ 3.728635] Switched to clocksource tsc
590[ 4.200511] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
591[ 4.207180] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
592[ 4.214139] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
593[ 7.347121] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
594[ 7.361317] systemd[1]: Detected architecture 'x86-64'.
595[ 8.562226] systemd[1]: Inserted module 'autofs4'
596[ 8.571585] systemd[1]: Set hostname to <cb-test-tgt>.
597[ 8.928491] random: nonblocking pool is initialized
598[ 10.860321] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
599[ 10.873216] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
600[ 10.888745] systemd[1]: Expecting device dev-ttyS0.device...
601[ 10.902194] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
602[ 10.910154] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
603[ 10.917867] systemd[1]: Starting Remote File Systems (Pre).
604[ 10.934158] systemd[1]: Reached target Remote File Systems (Pre).
605[ 10.940452] systemd[1]: Starting Encrypted Volumes.
606[ 10.954077] systemd[1]: Reached target Encrypted Volumes.
607[ 10.959622] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
608[ 10.967806] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
609[ 10.975863] systemd[1]: Starting Paths.
610[ 10.990042] systemd[1]: Reached target Paths.
611[ 10.994554] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
612[ 11.018035] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
613[ 11.027585] systemd[1]: Starting Swap.
614[ 11.042043] systemd[1]: Reached target Swap.
615[ 11.046527] systemd[1]: Starting Root Slice.
616[ 11.058051] systemd[1]: Created slice Root Slice.
617[ 11.062911] systemd[1]: Starting User and Session Slice.
618[ 11.078026] systemd[1]: Created slice User and Session Slice.
619[ 11.083927] systemd[1]: Starting Delayed Shutdown Socket.
620[ 11.098023] systemd[1]: Listening on Delayed Shutdown Socket.
621[ 11.103927] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
622[ 11.121998] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
623[ 11.129100] systemd[1]: Starting Journal Socket (/dev/log).
624[ 11.146005] systemd[1]: Listening on Journal Socket (/dev/log).
625[ 11.152091] systemd[1]: Starting udev Kernel Socket.
626[ 11.165990] systemd[1]: Listening on udev Kernel Socket.
627[ 11.172519] systemd[1]: Starting udev Control Socket.
628[ 11.185974] systemd[1]: Listening on udev Control Socket.
629[ 11.191500] systemd[1]: Starting Journal Socket.
630[ 11.205969] systemd[1]: Listening on Journal Socket.
631[ 11.211079] systemd[1]: Starting System Slice.
632[ 11.225967] systemd[1]: Created slice System Slice.
633[ 11.230966] systemd[1]: Starting system-getty.slice.
634[ 11.245966] systemd[1]: Created slice system-getty.slice.
635[ 11.251510] systemd[1]: Starting system-serial\x2dgetty.slice.
636[ 11.265965] systemd[1]: Created slice system-serial\x2dgetty.slice.
637[ 11.272433] systemd[1]: Starting Increase datagram queue length...
638[ 11.291431] systemd[1]: Mounting Debug File System...
639[ 11.307228] systemd[1]: Mounting POSIX Message Queue File System...
640[ 11.420207] systemd[1]: Starting Load Kernel Modules...
641[ 11.728877] systemd[1]: Started Set Up Additional Binary Formats.
642[ 11.742975] systemd[1]: Starting Create list of required static device nodes for the current kernel...
643[ 11.767265] systemd[1]: Starting udev Coldplug all Devices...
644[ 11.783208] systemd[1]: Mounting Huge Pages File System...
645[ 11.799064] systemd[1]: Starting Slices.
646[ 11.813807] systemd[1]: Reached target Slices.
647[ 11.818553] systemd[1]: Starting Remount Root and Kernel File Systems...
648[ 12.677612] systemd[1]: Started Increase datagram queue length.
649[ 12.684350] systemd[1]: Starting Syslog Socket.
650[ 12.697521] systemd[1]: Listening on Syslog Socket.
651[ 12.702566] systemd[1]: Starting Sockets.
652[ 12.717540] systemd[1]: Reached target Sockets.
653[ 12.722253] systemd[1]: Starting Journal Service...
654[ 12.749525] systemd[1]: Started Journal Service.
655[ 15.275124] systemd-journald[172]: Received request to flush runtime journal from PID 1
656[ 15.278471] systemd-udevd[189]: starting version 215
657[ 22.203691] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
658[ 22.211653] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
659[ 22.877878] FDC 0 is a post-1991 82077
660[ 23.198036] SCSI subsystem initialized
661[ 23.215008] EDAC MC: Ver: 3.0.0
662[ 23.254959] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
663[ 23.350010] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
664[ 23.355316] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
665[ 23.562652] libata version 3.00 loaded.
666[ 23.643124] MCE: In-kernel MCE decoding enabled.
667[ 23.679565] acpi-cpufreq: overriding BIOS provided _PSD data
668[ 23.749093] sata_nv 0000:00:07.0: version 3.5
669[ 23.749489] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
670[ 23.756146] scsi0 : sata_nv
671[ 23.759351] scsi1 : sata_nv
672[ 23.762332] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
673[ 23.769574] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
674[ 23.777015] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
675[ 23.783357] scsi2 : sata_nv
676[ 23.786815] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
677[ 23.787789] scsi3 : sata_nv
678[ 23.787894] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
679[ 23.787897] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
680[ 23.812656] ACPI: Power Button [PWRB]
681[ 23.816686] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
682[ 23.824490] ACPI: Power Button [PWRF]
683[ 23.828698] AMD64 EDAC driver v3.4.0
684[ 23.828958] input: PC Speaker as /devices/platform/pcspkr/input/input4
685[ 23.839143] EDAC amd64: DRAM ECC enabled.
686[ 23.843507] EDAC amd64: F10h detected (node 0).
687[ 23.848183] EDAC MC: DCT0 chip selects:
688[ 23.848185] EDAC amd64: MC: 0: 0MB 1: 0MB
689[ 23.852980] EDAC amd64: MC: 2: 0MB 3: 0MB
690[ 23.857781] EDAC amd64: MC: 4: 0MB 5: 0MB
691[ 23.862578] EDAC amd64: MC: 6: 1024MB 7: 1024MB
692[ 23.867389] EDAC MC: DCT1 chip selects:
693[ 23.867390] EDAC amd64: MC: 0: 0MB 1: 0MB
694[ 23.872186] EDAC amd64: MC: 2: 0MB 3: 0MB
695[ 23.876978] EDAC amd64: MC: 4: 0MB 5: 0MB
696[ 23.881775] EDAC amd64: MC: 6: 1024MB 7: 1024MB
697[ 23.886566] EDAC amd64: using x4 syndromes.
698[ 23.890836] EDAC amd64: MCT channel count: 2
699[ 23.895235] EDAC amd64: CS6: Registered DDR2 RAM
700[ 23.899944] EDAC amd64: CS7: Registered DDR2 RAM
701[ 23.905097] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
702[ 23.915397] EDAC amd64: DRAM ECC enabled.
703[ 23.919565] EDAC amd64: F10h detected (node 1).
704[ 23.924234] EDAC MC: DCT0 chip selects:
705[ 23.924238] EDAC amd64: MC: 0: 1024MB 1: 0MB
706[ 23.929045] EDAC amd64: MC: 2: 0MB 3: 0MB
707[ 23.933862] EDAC amd64: MC: 4: 0MB 5: 0MB
708[ 23.938672] EDAC amd64: MC: 6: 0MB 7: 0MB
709[ 23.943469] EDAC MC: DCT1 chip selects:
710[ 23.943471] EDAC amd64: MC: 0: 0MB 1: 0MB
711[ 23.948265] EDAC amd64: MC: 2: 0MB 3: 0MB
712[ 23.953059] EDAC amd64: MC: 4: 0MB 5: 0MB
713[ 23.957847] EDAC amd64: MC: 6: 0MB 7: 0MB
714[ 23.962638] EDAC amd64: using x4 syndromes.
715[ 23.966912] EDAC amd64: MCT channel count: 1
716[ 23.971339] EDAC amd64: CS0: Registered DDR2 RAM
717[ 23.976306] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
718[ 23.986189] pata_amd 0000:00:06.0: version 0.4.1
719[ 23.986244] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
720[ 23.987198] scsi4 : pata_amd
721[ 23.987496] scsi5 : pata_amd
722[ 23.987600] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
723[ 23.987602] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
724[ 24.085506] ata1: SATA link down (SStatus 0 SControl 300)
725[ 24.097499] ata3: SATA link down (SStatus 0 SControl 300)
726[ 24.417381] ata2: SATA link down (SStatus 0 SControl 300)
727[ 24.733267] ata4: SATA link down (SStatus 0 SControl 300)
728[ 24.967252] kvm: Nested Virtualization enabled
729[ 24.971872] kvm: Nested Paging enabled
730[ 62.990811] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
731[ 300.864444] [Hardware Error]: Corrected error, no action required.
732[ 300.870772] [Hardware Error]: CPU:4 (10:2:1) MC4_STATUS[-|CE|MiscV|-|AddrV|CECC]: 0x9c224000da080a13
733[ 300.880144] [Hardware Error]: MC4_ADDR: 0x000000017dbf2d40
734[ 300.885702] [Hardware Error]: MC4 Error (node 1): DRAM ECC error detected on the NB.
735[ 300.893654] EDAC MC1: 1 CE on mc#1csrow#0channel#0 (csrow:0 channel:0 page:0x17dbf2 offset:0xd40 grain:0 syndrome:0xda44)
736[ 300.904704] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)