blob: 3382ed6425cc6af808e3ad8d78524a61117e8c58 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand60168482015-06-10 04:45:23 +00001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9956-g429424f-dirty 06/10/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4250 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4210 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69A0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7800 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB7840 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7910 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7A88 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7AC0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B00 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7C78 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
91[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
93[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
95[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
96[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
97[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
98[ 0.000000] Zone ranges:
99[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
100[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
101[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
102[ 0.000000] Movable zone start for each node
103[ 0.000000] Early memory node ranges
104[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
105[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
106[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
107[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
108[ 0.000000] On node 0 totalpages: 1048377
109[ 0.000000] DMA zone: 56 pages used for memmap
110[ 0.000000] DMA zone: 21 pages reserved
111[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
112[ 0.000000] DMA32 zone: 10695 pages used for memmap
113[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
114[ 0.000000] Normal zone: 3584 pages used for memmap
115[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
116[ 0.000000] On node 1 totalpages: 262144
117[ 0.000000] Normal zone: 3584 pages used for memmap
118[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
119[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
120[ 0.000000] ACPI: Local APIC address 0xfee00000
121[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
137[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
138[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
139[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
142[ 0.000000] ACPI: IRQ9 used by override.
143[ 0.000000] ACPI: IRQ14 used by override.
144[ 0.000000] ACPI: IRQ15 used by override.
145[ 0.000000] Using ACPI (MADT) for SMP configuration information
146[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
147[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
148[ 0.000000] nr_irqs_gsi: 40
149[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
150[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
152[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
154[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
155[ 0.000000] Booting paravirtualized kernel on bare hardware
156[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
157[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
158[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
159[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
160[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
161[ 0.000000] Policy zone: Normal
162[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xf5fa000000-0xf5fbffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
173[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [tty0] enabled
182[ 0.000000] console [ttyS0] enabled
183[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
184[ 0.000000] hpet clockevent registered
185[ 0.000000] tsc: Fast TSC calibration using PIT
186[ 0.000000] tsc: Detected 1909.746 MHz processor
187[ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.49 BogoMIPS (lpj=7638984)
188[ 0.010954] pid_max: default: 32768 minimum: 301
189[ 0.015676] ACPI: Core revision 20140424
190[ 0.022098] ACPI: All ACPI Tables successfully acquired
191[ 0.027610] Security Framework initialized
192[ 0.031789] AppArmor: AppArmor disabled by boot time parameter
193[ 0.037699] Yama: disabled by default; enable with sysctl kernel.yama.*
194[ 0.045507] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
195[ 0.058780] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
196[ 0.068643] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.075678] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
198[ 0.083635] Initializing cgroup subsys memory
199[ 0.088096] Initializing cgroup subsys devices
200[ 0.092648] Initializing cgroup subsys freezer
201[ 0.097173] Initializing cgroup subsys net_cls
202[ 0.101723] Initializing cgroup subsys blkio
203[ 0.106081] Initializing cgroup subsys perf_event
204[ 0.110878] Initializing cgroup subsys net_prio
205[ 0.115535] tseg: 0000000000
206[ 0.115548] CPU: Physical Processor ID: 0
207[ 0.119669] CPU: Processor Core ID: 0
208[ 0.124475] mce: CPU supports 6 MCE banks
209[ 0.128614] LVT offset 0 assigned for vector 0xf9
210[ 0.133410] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
211Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
212tlb_flushall_shift: 6
213[ 0.148888] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
214[ 0.158023] ftrace: allocating 21601 entries in 85 pages
215[ 0.173480] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
216[ 0.219129] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
217[ 0.336311] Performance Events: AMD PMU driver.
218[ 0.341034] ... version: 0
219[ 0.345127] ... bit width: 48
220[ 0.349314] ... generic registers: 4
221[ 0.353412] ... value mask: 0000ffffffffffff
222[ 0.358802] ... max period: 00007fffffffffff
223[ 0.364208] ... fixed-purpose events: 0
224[ 0.368303] ... event mask: 000000000000000f
225[ 0.376324] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
226[ 0.384677] x86: Booting SMP configuration:
227[ 0.388948] .... node #0, CPUs: #1 #2 #3
228[ 0.433520] .... node #1, CPUs: #4 #5 #6 #7
229[ 0.585104] x86: Booted up 2 nodes, 8 CPUs
230[ 0.589534] smpboot: Total of 8 processors activated (30557.19 BogoMIPS)
231[ 0.602142] devtmpfs: initialized
232[ 0.614128] pinctrl core: initialized pinctrl subsystem
233[ 0.619601] NET: Registered protocol family 16
234[ 0.624341] cpuidle: using governor ladder
235[ 0.628521] cpuidle: using governor menu
236[ 0.632529] node 0 link 1: io port [1000, 3fff]
237[ 0.632532] TOM: 00000000c0000000 aka 3072M
238[ 0.636794] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
239[ 0.636798] node 0 link 1: mmio [fc000000, fc3fffff]
240[ 0.636801] node 0 link 1: mmio [f8000000, fbffffff]
241[ 0.636804] TOM2: 0000000180000000 aka 6144M
242[ 0.641155] bus: [bus 00-05] on node 0 link 1
243[ 0.641157] bus: 00 [io 0x0000-0xffff]
244[ 0.641159] bus: 00 [mem 0xd0000000-0xffffffff]
245[ 0.641160] bus: 00 [mem 0x180000000-0xfcffffffff]
246[ 0.641267] ACPI: bus type PCI registered
247[ 0.645346] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
248[ 0.652023] PCI: Using configuration type 1 for base access
249[ 0.657666] PCI: Using configuration type 1 for extended access
250[ 0.664288] mtrr: your CPUs had inconsistent variable MTRR settings
251[ 0.670643] mtrr: probably your BIOS does not setup all CPUs.
252[ 0.676476] mtrr: corrected configuration.
253[ 0.693220] ACPI: Added _OSI(Module Device)
254[ 0.697516] ACPI: Added _OSI(Processor Device)
255[ 0.702040] ACPI: Added _OSI(3.0 _SCP Extensions)
256[ 0.706814] ACPI: Added _OSI(Processor Aggregator Device)
257[ 0.715876] ACPI: Interpreter enabled
258[ 0.719628] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
259[ 0.729080] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
260[ 0.738527] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
261[ 0.747973] ACPI: (supports S0 S1 S5)
262[ 0.751727] ACPI: Using IOAPIC for interrupt routing
263[ 0.756808] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
264[ 0.784047] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
265[ 0.790308] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
266[ 0.798624] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
267[ 0.835814] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
268[ 0.845989] PCI host bridge to bus 0000:00
269[ 0.850181] pci_bus 0000:00: root bus resource [bus 00-05]
270[ 0.855759] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
271[ 0.862028] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
272[ 0.868991] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
273[ 0.875951] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
274[ 0.882239] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
275[ 0.882421] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
276[ 0.882428] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
277[ 0.882562] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
278[ 0.882570] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
279[ 0.882589] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
280[ 0.882600] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
281[ 0.882634] pci 0000:00:01.1: PME# supported from D3hot D3cold
282[ 0.882735] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
283[ 0.882749] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
284[ 0.882778] pci 0000:00:02.0: supports D1 D2
285[ 0.882797] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.882863] pci 0000:00:02.0: System wakeup disabled by ACPI
287[ 0.888677] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
288[ 0.888691] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
289[ 0.888733] pci 0000:00:02.1: supports D1 D2
290[ 0.888735] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.888783] pci 0000:00:02.1: System wakeup disabled by ACPI
292[ 0.894595] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
293[ 0.894636] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
294[ 0.894648] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
295[ 0.901872] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
296[ 0.908492] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
297[ 0.915715] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
298[ 0.922428] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
299[ 0.922438] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
300[ 0.922443] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
301[ 0.922448] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
302[ 0.922452] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
303[ 0.922457] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
304[ 0.922462] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
305[ 0.922607] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
306[ 0.922619] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
307[ 0.922629] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
308[ 0.922636] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
309[ 0.922641] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
310[ 0.922646] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
311[ 0.922650] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
312[ 0.922815] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
313[ 0.922914] pci 0000:00:09.0: System wakeup disabled by ACPI
314[ 0.928706] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
315[ 0.928756] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.928810] pci 0000:00:0b.0: System wakeup disabled by ACPI
317[ 0.934601] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
318[ 0.934654] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.934701] pci 0000:00:0c.0: System wakeup disabled by ACPI
320[ 0.940515] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
321[ 0.940554] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.940620] pci 0000:00:0d.0: System wakeup disabled by ACPI
323[ 0.946428] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
324[ 0.946473] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.946543] pci 0000:00:0e.0: System wakeup disabled by ACPI
326[ 0.952372] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
327[ 0.952565] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
328[ 0.952682] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
329[ 0.952831] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
330[ 0.952964] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
331[ 0.953077] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
332[ 0.953231] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
333[ 0.953352] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
334[ 0.953501] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
335[ 0.953662] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
336[ 0.953868] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
337[ 0.953888] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
338[ 0.953907] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
339[ 0.953927] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
340[ 0.953968] pci 0000:01:04.0: supports D1 D2
341[ 0.954090] pci 0000:00:09.0: PCI bridge to [bus 01]
342[ 0.959145] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
343[ 0.959148] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
344[ 0.959152] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
345[ 0.959251] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.959280] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
347[ 0.959320] pci 0000:02:00.0: reg 0x30: [mem 0x78400000-0x7840ffff pref]
348[ 0.959411] pci 0000:02:00.0: PME# supported from D3hot D3cold
349[ 0.959499] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.969621] pci 0000:00:0b.0: PCI bridge to [bus 02]
351[ 0.974672] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
352[ 0.974770] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
353[ 0.974795] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
354[ 0.974914] pci 0000:03:00.0: PME# supported from D3hot D3cold
355[ 0.975001] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
356[ 0.985127] pci 0000:00:0c.0: PCI bridge to [bus 03]
357[ 0.990180] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
358[ 0.990250] pci 0000:00:0d.0: PCI bridge to [bus 04]
359[ 0.995370] pci 0000:00:0e.0: PCI bridge to [bus 05]
360[ 1.000463] pci_bus 0000:00: on NUMA node 0
361[ 1.000566] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
362[ 1.007001] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
363[ 1.013422] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
364[ 1.021101] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
365[ 1.028754] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
366[ 1.036442] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
367[ 1.044088] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
368[ 1.050515] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
369[ 1.056944] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
370[ 1.064612] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.072297] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
372[ 1.079953] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
373[ 1.086373] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
374[ 1.092803] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
375[ 1.100476] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
376[ 1.108128] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
377[ 1.115815] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
378[ 1.124917] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
379[ 1.131636] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
380[ 1.138351] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
381[ 1.145081] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
382[ 1.152078] ACPI: Enabled 1 GPEs in block 00 to 1F
383[ 1.157344] vgaarb: setting as boot device: PCI:0000:01:04.0
384[ 1.163128] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
385[ 1.171327] vgaarb: loaded
386[ 1.174122] vgaarb: bridge control possible 0000:01:04.0
387[ 1.179688] PCI: Using ACPI for IRQ routing
388[ 1.183961] PCI: pci_cache_line_size set to 64 bytes
389[ 1.184017] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
390[ 1.184021] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
391[ 1.184350] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
392[ 1.191479] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
393[ 1.196764] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
394[ 1.205525] Switched to clocksource hpet
395[ 1.221190] pnp: PnP ACPI init
396[ 1.224416] ACPI: bus type PNP registered
397[ 1.229027] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 1.229114] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
399[ 1.229198] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
400[ 1.229292] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.229330] pnp 00:04: [dma 2]
402[ 1.229377] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
403[ 1.229399] pnp: PnP ACPI: found 5 devices
404[ 1.233588] ACPI: bus type PNP unregistered
405[ 1.245642] pci 0000:02:00.0: can't claim BAR 6 [mem 0x78400000-0x7840ffff pref]: no compatible bridge window
406[ 1.255720] pci 0000:00:09.0: PCI bridge to [bus 01]
407[ 1.260757] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
408[ 1.266929] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
409[ 1.273799] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
410[ 1.281135] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
411[ 1.288497] pci 0000:00:0b.0: PCI bridge to [bus 02]
412[ 1.293539] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
413[ 1.300414] pci 0000:00:0c.0: PCI bridge to [bus 03]
414[ 1.305460] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
415[ 1.312338] pci 0000:00:0d.0: PCI bridge to [bus 04]
416[ 1.317392] pci 0000:00:0e.0: PCI bridge to [bus 05]
417[ 1.322444] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
418[ 1.322447] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
419[ 1.322449] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
420[ 1.322451] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7]
421[ 1.322455] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
422[ 1.322458] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
423[ 1.322460] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
424[ 1.322463] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
425[ 1.322466] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
426[ 1.322604] NET: Registered protocol family 2
427[ 1.327538] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
428[ 1.335357] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
429[ 1.342768] TCP: Hash tables configured (established 65536 bind 65536)
430[ 1.349484] TCP: reno registered
431[ 1.352798] UDP hash table entries: 4096 (order: 5, 131072 bytes)
432[ 1.359068] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
433[ 1.365926] NET: Registered protocol family 1
434[ 1.370766] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
435[ 1.376962] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
436[ 1.382957] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.388582] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.394169] pci 0000:00:0b.0: Found disabled HT MSI Mapping
439[ 1.399825] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.405463] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.411032] pci 0000:00:0c.0: Found disabled HT MSI Mapping
442[ 1.416681] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.422287] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.427872] pci 0000:00:0d.0: Found disabled HT MSI Mapping
445[ 1.433533] pci 0000:00:00.0: Found enabled HT MSI Mapping
446[ 1.439160] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.444748] pci 0000:00:0e.0: Found disabled HT MSI Mapping
448[ 1.450402] pci 0000:00:00.0: Found enabled HT MSI Mapping
449[ 1.455996] pci 0000:01:04.0: Video device with shadowed ROM
450[ 1.456005] PCI: CLS 64 bytes, default 64
451[ 1.456111] Unpacking initramfs...
452[ 1.688918] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
453[ 1.696890] PCI-DMA: Disabling AGP.
454[ 1.702119] PCI-DMA: aperture base @ b4000000 size 65536 KB
455[ 1.707797] PCI-DMA: using GART IOMMU.
456[ 1.711636] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
457[ 1.724102] platform rtc_cmos: registered platform RTC device (no PNP device found)
458[ 1.732445] microcode: CPU0: patch_level=0x01000096
459[ 1.737445] microcode: CPU1: patch_level=0x01000096
460[ 1.742452] microcode: CPU2: patch_level=0x01000096
461[ 1.747463] microcode: CPU3: patch_level=0x01000096
462[ 1.752470] microcode: CPU4: patch_level=0x01000096
463[ 1.757462] microcode: CPU5: patch_level=0x01000096
464[ 1.762453] microcode: CPU6: patch_level=0x01000096
465[ 1.768557] microcode: CPU7: patch_level=0x01000096
466[ 1.773641] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
467[ 1.782580] LVT offset 1 assigned for vector 0x400
468[ 1.787479] IBS: LVT offset 1 assigned
469[ 1.791371] perf: AMD IBS detected (0x00000007)
470[ 1.796611] futex hash table entries: 2048 (order: 5, 131072 bytes)
471[ 1.803100] audit: initializing netlink subsys (disabled)
472[ 1.808613] audit: type=2000 audit(1433911018.624:1): initialized
473[ 1.815576] HugeTLB registered 2 MB page size, pre-allocated 0 pages
474[ 1.822098] zbud: loaded
475[ 1.825057] VFS: Disk quotas dquot_6.5.2
476[ 1.829105] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
477[ 1.835730] msgmni has been set to 9945
478[ 1.840182] alg: No test for stdrng (krng)
479[ 1.844474] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
480[ 1.852124] io scheduler noop registered
481[ 1.856152] io scheduler deadline registered
482[ 1.860610] io scheduler cfq registered (default)
483[ 1.865626] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
484[ 1.865754] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
485[ 1.865866] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
486[ 1.865974] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
487[ 1.866141] aer 0000:00:0b.0:pcie02: service driver aer loaded
488[ 1.866169] aer 0000:00:0c.0:pcie02: service driver aer loaded
489[ 1.866195] aer 0000:00:0d.0:pcie02: service driver aer loaded
490[ 1.866221] aer 0000:00:0e.0:pcie02: service driver aer loaded
491[ 1.866243] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
492[ 1.873333] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
493[ 1.879941] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
494[ 1.879951] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
495[ 1.886995] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
496[ 1.893613] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
497[ 1.893623] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
498[ 1.900667] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
499[ 1.900676] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
500[ 1.907729] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
501[ 1.907763] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
502[ 1.913462] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
503[ 1.920293] GHES: HEST is not enabled!
504[ 1.924252] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
505[ 1.951030] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
506[ 1.978811] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
507[ 1.986828] Linux agpgart interface v0.103
508[ 1.991238] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
509[ 2.001794] serio: i8042 KBD port at 0x60,0x64 irq 1
510[ 2.006896] serio: i8042 AUX port at 0x60,0x64 irq 12
511[ 2.012228] mousedev: PS/2 mouse device common for all mice
512[ 2.018034] rtc_cmos rtc_cmos: RTC can wake from S4
513[ 2.023249] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
514[ 2.029737] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
515[ 2.037722] ledtrig-cpu: registered to indicate activity on CPUs
516[ 2.043998] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
517[ 2.050542] AMD IOMMUv2 functionality not available on this system
518[ 2.056956] TCP: cubic registered
519[ 2.060525] NET: Registered protocol family 10
520[ 2.065500] mip6: Mobile IPv6
521[ 2.068564] NET: Registered protocol family 17
522[ 2.073175] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
523[ 2.081949] mpls_gso: MPLS GSO support
524[ 2.086694] registered taskstats version 1
525[ 2.091654] rtc_cmos rtc_cmos: setting system clock to 2015-06-10 04:37:00 UTC (1433911020)
526[ 2.100237] PM: Hibernation image not present or could not be loaded.
527[ 2.102077] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
528[ 2.110069] Write protecting the kernel read-only data: 8192k
529[ 2.119403] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
530[ 2.128151] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
531[ 2.152165] systemd-udevd[99]: starting version 215
532[ 2.158011] random: systemd-udevd urandom read with 3 bits of entropy available
533[ 2.188087] ACPI: bus type USB registered
534[ 2.192408] usbcore: registered new interface driver usbfs
535[ 2.198056] usbcore: registered new interface driver hub
536[ 2.203666] usbcore: registered new device driver usb
537[ 2.203686] pps_core: LinuxPPS API ver. 1 registered
538[ 2.203688] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
539[ 2.223694] PTP clock support registered
540[ 2.228047] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
541[ 2.235054] tg3.c:v3.137 (May 11, 2014)
542[ 2.239042] tg3 0000:02:00.0: enabling device (0004 -> 0006)
543[ 2.244992] ehci-pci: EHCI PCI platform driver
544[ 2.245237] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
545[ 2.255654] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
546[ 2.255709] ehci-pci 0000:00:02.1: EHCI Host Controller
547[ 2.255727] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
548[ 2.255749] ehci-pci 0000:00:02.1: debug port 1
549[ 2.255796] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
550[ 2.255825] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
551[ 2.265182] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
552[ 2.265253] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
553[ 2.265255] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
554[ 2.265256] usb usb1: Product: EHCI Host Controller
555[ 2.265258] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
556[ 2.265259] usb usb1: SerialNumber: 0000:00:02.1
557[ 2.265558] hub 1-0:1.0: USB hub found
558[ 2.265576] hub 1-0:1.0: 10 ports detected
559[ 2.329719] ohci-pci: OHCI PCI platform driver
560[ 2.334487] ohci-pci 0000:00:02.0: OHCI PCI host controller
561[ 2.340168] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
562[ 2.347718] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
563[ 2.380281] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
564[ 2.390675] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
565[ 2.400523] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
566[ 2.408461] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
567[ 2.415361] tg3 0000:03:00.0: enabling device (0004 -> 0006)
568[ 2.417464] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
569[ 2.417466] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
570[ 2.417469] usb usb2: Product: OHCI PCI host controller
571[ 2.417470] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
572[ 2.417471] usb usb2: SerialNumber: 0000:00:02.0
573[ 2.417770] hub 2-0:1.0: USB hub found
574[ 2.417812] hub 2-0:1.0: 10 ports detected
575[ 2.459603] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
576[ 2.513397] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
577[ 2.523782] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
578[ 2.533633] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
579[ 2.541570] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
580[ 2.555913] FS-Cache: Loaded
581[ 2.562475] RPC: Registered named UNIX socket transport module.
582[ 2.569090] RPC: Registered udp transport module.
583[ 2.575170] RPC: Registered tcp transport module.
584[ 2.581269] RPC: Registered tcp NFSv4.1 backchannel transport module.
585[ 2.593729] FS-Cache: Netfs 'nfs' registered for caching
586[ 2.612059] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
587[ 2.657166] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
588[ 2.721022] tsc: Refined TSC clocksource calibration: 1909.786 MHz
589[ 3.724764] Switched to clocksource tsc
590[ 4.252476] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
591[ 4.259118] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
592[ 4.266068] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
593[ 12.703883] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
594[ 12.718098] systemd[1]: Detected architecture 'x86-64'.
595[ 14.053623] random: nonblocking pool is initialized
596[ 15.642411] systemd[1]: Inserted module 'autofs4'
597[ 15.651124] systemd[1]: Set hostname to <cb-test-tgt>.
598[ 18.350432] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
599[ 18.363318] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
600[ 18.378894] systemd[1]: Expecting device dev-ttyS0.device...
601[ 18.395641] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
602[ 18.403485] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
603[ 18.411183] systemd[1]: Starting Remote File Systems (Pre).
604[ 18.427712] systemd[1]: Reached target Remote File Systems (Pre).
605[ 18.434100] systemd[1]: Starting Encrypted Volumes.
606[ 18.447706] systemd[1]: Reached target Encrypted Volumes.
607[ 18.453391] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
608[ 18.461607] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
609[ 18.469652] systemd[1]: Starting Paths.
610[ 18.483689] systemd[1]: Reached target Paths.
611[ 18.488284] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
612[ 18.511590] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
613[ 18.521147] systemd[1]: Starting Swap.
614[ 18.535586] systemd[1]: Reached target Swap.
615[ 18.540007] systemd[1]: Starting Root Slice.
616[ 18.551582] systemd[1]: Created slice Root Slice.
617[ 18.556433] systemd[1]: Starting User and Session Slice.
618[ 18.571563] systemd[1]: Created slice User and Session Slice.
619[ 18.577440] systemd[1]: Starting Delayed Shutdown Socket.
620[ 18.591576] systemd[1]: Listening on Delayed Shutdown Socket.
621[ 18.597482] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
622[ 18.615553] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
623[ 18.622664] systemd[1]: Starting Journal Socket (/dev/log).
624[ 18.639551] systemd[1]: Listening on Journal Socket (/dev/log).
625[ 18.645637] systemd[1]: Starting udev Kernel Socket.
626[ 18.659540] systemd[1]: Listening on udev Kernel Socket.
627[ 18.666069] systemd[1]: Starting udev Control Socket.
628[ 18.679518] systemd[1]: Listening on udev Control Socket.
629[ 18.685056] systemd[1]: Starting Journal Socket.
630[ 18.699512] systemd[1]: Listening on Journal Socket.
631[ 18.704626] systemd[1]: Starting System Slice.
632[ 18.719502] systemd[1]: Created slice System Slice.
633[ 18.724503] systemd[1]: Starting system-getty.slice.
634[ 18.739516] systemd[1]: Created slice system-getty.slice.
635[ 18.745068] systemd[1]: Starting system-serial\x2dgetty.slice.
636[ 18.759509] systemd[1]: Created slice system-serial\x2dgetty.slice.
637[ 18.765970] systemd[1]: Starting Increase datagram queue length...
638[ 18.784480] systemd[1]: Mounting Debug File System...
639[ 18.800747] systemd[1]: Mounting POSIX Message Queue File System...
640[ 18.892471] systemd[1]: Starting Load Kernel Modules...
641[ 19.345606] systemd[1]: Started Set Up Additional Binary Formats.
642[ 20.191619] systemd[1]: Starting Create list of required static device nodes for the current kernel...
643[ 20.216334] systemd[1]: Starting udev Coldplug all Devices...
644[ 20.232670] systemd[1]: Mounting Huge Pages File System...
645[ 20.248421] systemd[1]: Starting Slices.
646[ 20.263043] systemd[1]: Reached target Slices.
647[ 20.267780] systemd[1]: Starting Remount Root and Kernel File Systems...
648[ 20.686908] systemd[1]: Started Increase datagram queue length.
649[ 20.693459] systemd[1]: Starting Syslog Socket.
650[ 20.706884] systemd[1]: Listening on Syslog Socket.
651[ 20.711968] systemd[1]: Starting Sockets.
652[ 20.726815] systemd[1]: Reached target Sockets.
653[ 20.731475] systemd[1]: Starting Journal Service...
654[ 20.758864] systemd[1]: Started Journal Service.
655[ 25.160587] systemd-udevd[189]: starting version 215
656[ 25.193126] systemd-journald[171]: Received request to flush runtime journal from PID 1
657[ 34.494013] nfs: server 10.100.1.1 not responding, still trying
658[ 34.657632] nfs: server 10.100.1.1 OK
659[ 34.693943] nfs: server 10.100.1.1 not responding, still trying
660[ 34.700005] nfs: server 10.100.1.1 not responding, still trying
661[ 34.706019] nfs: server 10.100.1.1 not responding, still trying
662[ 34.712041] nfs: server 10.100.1.1 not responding, still trying
663[ 34.718068] nfs: server 10.100.1.1 not responding, still trying
664[ 34.724081] nfs: server 10.100.1.1 not responding, still trying
665[ 34.730095] nfs: server 10.100.1.1 not responding, still trying
666[ 34.736115] nfs: server 10.100.1.1 not responding, still trying
667[ 34.742127] nfs: server 10.100.1.1 not responding, still trying
668[ 34.748139] nfs: server 10.100.1.1 not responding, still trying
669[ 34.754151] nfs: server 10.100.1.1 not responding, still trying
670[ 34.760169] nfs: server 10.100.1.1 not responding, still trying
671[ 34.796824] nfs: server 10.100.1.1 OK
672[ 34.875607] nfs: server 10.100.1.1 OK
673[ 34.940059] nfs: server 10.100.1.1 OK
674[ 35.050206] nfs: server 10.100.1.1 OK
675[ 35.216436] nfs: server 10.100.1.1 OK
676[ 35.331785] nfs: server 10.100.1.1 OK
677[ 35.439638] nfs: server 10.100.1.1 OK
678[ 35.550285] nfs: server 10.100.1.1 OK
679[ 35.591133] nfs: server 10.100.1.1 OK
680[ 35.666923] nfs: server 10.100.1.1 OK
681[ 35.744528] nfs: server 10.100.1.1 OK
682[ 35.835764] nfs: server 10.100.1.1 OK
683[ 36.629274] nfs: server 10.100.1.1 not responding, still trying
684[ 36.635339] nfs: server 10.100.1.1 not responding, still trying
685[ 36.754950] nfs: server 10.100.1.1 OK
686[ 36.758770] nfs: server 10.100.1.1 OK
687[ 40.696481] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
688[ 40.704447] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
689[ 41.645769] EDAC MC: Ver: 3.0.0
690[ 42.140752] SCSI subsystem initialized
691[ 42.212367] MCE: In-kernel MCE decoding enabled.
692[ 42.302318] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
693[ 42.684198] libata version 3.00 loaded.
694[ 43.007022] FDC 0 is a post-1991 82077
695[ 43.206716] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
696[ 43.212042] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
697[ 43.300533] AMD64 EDAC driver v3.4.0
698[ 43.304285] EDAC amd64: DRAM ECC enabled.
699[ 43.308408] EDAC amd64: F10h detected (node 0).
700[ 43.313046] EDAC MC: DCT0 chip selects:
701[ 43.313048] EDAC amd64: MC: 0: 0MB 1: 0MB
702[ 43.317844] EDAC amd64: MC: 2: 0MB 3: 0MB
703[ 43.322635] EDAC amd64: MC: 4: 0MB 5: 0MB
704[ 43.327429] EDAC amd64: MC: 6: 1024MB 7: 1024MB
705[ 43.332256] EDAC MC: DCT1 chip selects:
706[ 43.332258] EDAC amd64: MC: 0: 0MB 1: 0MB
707[ 43.337098] EDAC amd64: MC: 2: 0MB 3: 0MB
708[ 43.341946] EDAC amd64: MC: 4: 0MB 5: 0MB
709[ 43.342244] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
710[ 43.342251] ACPI: Power Button [PWRB]
711[ 43.342335] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
712[ 43.342337] ACPI: Power Button [PWRF]
713[ 43.370210] EDAC amd64: MC: 6: 1024MB 7: 1024MB
714[ 43.375039] EDAC amd64: using x4 syndromes.
715[ 43.379334] EDAC amd64: MCT channel count: 2
716[ 43.383733] EDAC amd64: CS6: Registered DDR2 RAM
717[ 43.388444] EDAC amd64: CS7: Registered DDR2 RAM
718[ 43.393393] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
719[ 43.403245] EDAC amd64: DRAM ECC enabled.
720[ 43.407436] EDAC amd64: F10h detected (node 1).
721[ 43.412194] EDAC MC: DCT0 chip selects:
722[ 43.412203] EDAC amd64: MC: 0: 1024MB 1: 0MB
723[ 43.417039] EDAC amd64: MC: 2: 0MB 3: 0MB
724[ 43.421835] EDAC amd64: MC: 4: 0MB 5: 0MB
725[ 43.426632] EDAC amd64: MC: 6: 0MB 7: 0MB
726[ 43.431426] EDAC MC: DCT1 chip selects:
727[ 43.431429] EDAC amd64: MC: 0: 0MB 1: 0MB
728[ 43.436229] EDAC amd64: MC: 2: 0MB 3: 0MB
729[ 43.441042] EDAC amd64: MC: 4: 0MB 5: 0MB
730[ 43.445840] EDAC amd64: MC: 6: 0MB 7: 0MB
731[ 43.450632] EDAC amd64: using x4 syndromes.
732[ 43.454897] EDAC amd64: MCT channel count: 1
733[ 43.459348] EDAC amd64: CS0: Registered DDR2 RAM
734[ 43.464333] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
735[ 43.474214] pata_amd 0000:00:06.0: version 0.4.1
736[ 43.474243] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
737[ 43.474831] scsi0 : pata_amd
738[ 43.488673] scsi1 : pata_amd
739[ 43.491822] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
740[ 43.498903] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
741[ 43.506030] sata_nv 0000:00:07.0: version 3.5
742[ 43.506305] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
743[ 43.512762] scsi2 : sata_nv
744[ 43.515816] scsi3 : sata_nv
745[ 43.518763] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
746[ 43.526021] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
747[ 43.533444] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
748[ 43.539678] scsi4 : sata_nv
749[ 43.542700] scsi5 : sata_nv
750[ 43.545624] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
751[ 43.552836] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
752[ 43.560423] input: PC Speaker as /devices/platform/pcspkr/input/input4
753[ 43.619680] acpi-cpufreq: overriding BIOS provided _PSD data
754[ 43.842791] ata3: SATA link down (SStatus 0 SControl 300)
755[ 43.870787] ata5: SATA link down (SStatus 0 SControl 300)
756[ 44.158678] ata4: SATA link down (SStatus 0 SControl 300)
757[ 44.474577] ata6: SATA link down (SStatus 0 SControl 300)
758[ 44.708666] kvm: Nested Virtualization enabled
759[ 44.713267] kvm: Nested Paging enabled
760[ 85.814461] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
761[ 301.026098] [Hardware Error]: Corrected error, no action required.
762[ 301.032416] [Hardware Error]: CPU:4 (10:2:1) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc224100da080a13
763[ 301.042031] [Hardware Error]: MC4_ADDR: 0x000000017f80e3c0
764[ 301.047589] [Hardware Error]: MC4 Error (node 1): DRAM ECC error detected on the NB.
765[ 301.055499] EDAC MC1: 1 CE on mc#1csrow#0channel#0 (csrow:0 channel:0 page:0x17f80e offset:0x3c0 grain:0 syndrome:0xda44)
766[ 301.066524] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)
767[ 410.989032] nfs: server 10.100.1.1 not responding, still trying
768[ 410.995126] nfs: server 10.100.1.1 not responding, still trying
769[ 411.001147] nfs: server 10.100.1.1 not responding, still trying
770[ 411.007152] nfs: server 10.100.1.1 not responding, still trying
771[ 411.013159] nfs: server 10.100.1.1 not responding, still trying
772[ 411.054132] nfs: server 10.100.1.1 OK
773[ 411.108996] nfs: server 10.100.1.1 OK
774[ 411.159105] nfs: server 10.100.1.1 OK
775[ 411.211970] nfs: server 10.100.1.1 OK
776[ 411.265518] nfs: server 10.100.1.1 OK
777[ 413.788689] nfs: server 10.100.1.1 not responding, still trying
778[ 413.794776] nfs: server 10.100.1.1 not responding, still trying
779[ 413.800816] nfs: server 10.100.1.1 not responding, still trying
780[ 413.806838] nfs: server 10.100.1.1 not responding, still trying
781[ 413.812855] nfs: server 10.100.1.1 not responding, still trying
782[ 413.818877] nfs: server 10.100.1.1 not responding, still trying
783[ 413.824909] nfs: server 10.100.1.1 not responding, still trying
784[ 413.944353] nfs: server 10.100.1.1 OK
785[ 414.003550] nfs: server 10.100.1.1 OK
786[ 414.070150] nfs: server 10.100.1.1 OK
787[ 414.136184] nfs: server 10.100.1.1 OK
788[ 414.201675] nfs: server 10.100.1.1 OK
789[ 414.268755] nfs: server 10.100.1.1 OK
790[ 414.325566] nfs: server 10.100.1.1 OK
791[ 415.472498] nfs: server 10.100.1.1 not responding, still trying
792[ 415.478603] nfs: server 10.100.1.1 not responding, still trying
793[ 415.524212] nfs: server 10.100.1.1 OK
794[ 415.528080] nfs: server 10.100.1.1 OK