Gitiles
Code Review Sign In
review.coreboot.org / board-status / f0c508b2f7394ec2ebaf42ed5f7a0bd316ff5e6b / . / asus / kfsn4-dre / 4.0-8012-g8057285 / 2015-01-28T21:12:06Z / kernel_log.txt
blob: 7299ddd69e364a1bad5d48c0233840232b33d9d3 [file] [log] [blame]
Timothy Pearson96b9b0f2015-01-28 22:29:32 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-coreboot-dev rootfstype=nfs nfsroot=192.168.1.50:/mnt/udata/nfsroots/coreboot-dev,v3,hard,nointr,tcp ip=192.168.22.60::192.168.22.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-coreboot-dev
6[ 0.000000] KERNEL supported cpus:
7[ 0.000000] Intel GenuineIntel
8[ 0.000000] AMD AuthenticAMD
9[ 0.000000] Centaur CentaurHauls
10[ 0.000000] e820: BIOS-provided physical RAM map:
11[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
12[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffaffff] usable
15[ 0.000000] BIOS-e820: [mem 0x000000003ffb0000-0x000000003fffffff] reserved
16[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
17[ 0.000000] NX (Execute Disable) protection: active
18[ 0.000000] SMBIOS 2.7 present.
19[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-7984-g808cc15 01/26/2015
20[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
21[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
22[ 0.000000] No AGP bridge found
23[ 0.000000] e820: last_pfn = 0x3ffb0 max_arch_pfn = 0x400000000
24[ 0.000000] MTRR default type: uncachable
25[ 0.000000] MTRR fixed ranges enabled:
26[ 0.000000] 00000-FFFFF write-back
27[ 0.000000] MTRR variable ranges enabled:
28[ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back
29[ 0.000000] 1 base 0000D4000000 mask FFFFFC000000 write-combining
30[ 0.000000] 2 disabled
31[ 0.000000] 3 disabled
32[ 0.000000] 4 disabled
33[ 0.000000] 5 disabled
34[ 0.000000] 6 disabled
35[ 0.000000] 7 disabled
36[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
37[ 0.000000] found SMP MP-table at [mem 0x000f1500-0x000f150f] mapped at [ffff8800000f1500]
38[ 0.000000] Scanning 1 areas for low memory corruption
39[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
40[ 0.000000] Using GB pages for direct mapping
41[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
42[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
43[ 0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE
44[ 0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE
45[ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE
46[ 0.000000] init_memory_mapping: [mem 0x3ee00000-0x3effffff]
47[ 0.000000] [mem 0x3ee00000-0x3effffff] page 2M
48[ 0.000000] init_memory_mapping: [mem 0x3c000000-0x3edfffff]
49[ 0.000000] [mem 0x3c000000-0x3edfffff] page 2M
50[ 0.000000] init_memory_mapping: [mem 0x00100000-0x3bffffff]
51[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
52[ 0.000000] [mem 0x00200000-0x3bffffff] page 2M
53[ 0.000000] init_memory_mapping: [mem 0x3f000000-0x3ffaffff]
54[ 0.000000] [mem 0x3f000000-0x3fdfffff] page 2M
55[ 0.000000] [mem 0x3fe00000-0x3ffaffff] page 4k
56[ 0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE
57[ 0.000000] RAMDISK: [mem 0x3f1d8000-0x3fe88fff]
58[ 0.000000] ACPI: RSDP 00000000000f16d0 000024 (v02 CORE )
59[ 0.000000] ACPI: XSDT 000000003ffb90e0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: FACP 000000003ffbb8a0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: DSDT 000000003ffb9250 002644 (v02 ASUS COREBOOT 00000001 INTL 20140114)
62[ 0.000000] ACPI: FACS 000000003ffb9210 000040
63[ 0.000000] ACPI: SSDT 000000003ffbb9a0 000D57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
64[ 0.000000] ACPI: APIC 000000003ffbc700 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
65[ 0.000000] ACPI: SRAT 000000003ffbc7d0 000128 (v01 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: SLIT 000000003ffbc8f8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: HPET 000000003ffbc930 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SRAT 000000003ffbc970 000128 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: SLIT 000000003ffbca98 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: Local APIC address 0xfee00000
71[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
72[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
73[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
75[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
76[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
77[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
79[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
80[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0x3fffffff]
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0x3fffffff]
82[ 0.000000] NUMA: Initialized distance table, cnt=3
83[ 0.000000] NUMA: node 2 [mem 0x00100000-0x3ffaffff] overlaps with node 0 [mem 0x00100000-0x3ffaffff]
84[ 0.000000] Scanning NUMA topology in Northbridge 24
85[ 0.000000] Number of physical nodes 2
86[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003ffb0000
87[ 0.000000] Skipping disabled node 1
88[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3ffaffff]
89[ 0.000000] NODE_DATA [mem 0x3ffab000-0x3ffaffff]
90[ 0.000000] [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003d800000-ffff88003e7fffff] on node 0
91[ 0.000000] Zone ranges:
92[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
93[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
94[ 0.000000] Normal empty
95[ 0.000000] Movable zone start for each node
96[ 0.000000] Early memory node ranges
97[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
98[ 0.000000] node 0: [mem 0x00100000-0x3ffaffff]
99[ 0.000000] On node 0 totalpages: 261966
100[ 0.000000] DMA zone: 64 pages used for memmap
101[ 0.000000] DMA zone: 21 pages reserved
102[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
103[ 0.000000] DMA32 zone: 4031 pages used for memmap
104[ 0.000000] DMA32 zone: 257968 pages, LIFO batch:31
105[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
106[ 0.000000] ACPI: Local APIC address 0xfee00000
107[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
108[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
109[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
110[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
111[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
112[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
113[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
114[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
115[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
116[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
117[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
118[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
119[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
120[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
121[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
122[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
123[ 0.000000] ACPI: IOAPIC (id[0x10] address[0xfec00000] gsi_base[0])
124[ 0.000000] IOAPIC[0]: apic_id 16, version 17, address 0xfec00000, GSI 0-23
125[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
126[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
127[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
128[ 0.000000] ACPI: IRQ9 used by override.
129[ 0.000000] ACPI: IRQ14 used by override.
130[ 0.000000] ACPI: IRQ15 used by override.
131[ 0.000000] Using ACPI (MADT) for SMP configuration information
132[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
133[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
134[ 0.000000] nr_irqs_gsi: 40
135[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
136[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
137[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
138[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
139[ 0.000000] Booting paravirtualized kernel on bare hardware
140[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
141[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88003ee00000 s86336 r8192 d24256 u262144
142[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
143[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
144[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 257850
145[ 0.000000] Policy zone: DMA32
146[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-coreboot-dev rootfstype=nfs nfsroot=192.168.1.50:/mnt/udata/nfsroots/coreboot-dev,v3,hard,nointr,tcp ip=192.168.22.60::192.168.22.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-coreboot-dev
147[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
148[ 0.000000] Checking aperture...
149[ 0.000000] No AGP bridge found
150[ 0.000000] Node 0: aperture @ d8000000 size 64 MB
151[ 0.000000] Node 1: aperture @ d8000000 size 64 MB
152[ 0.000000] Memory: 1000940K/1047864K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 46924K reserved)
153[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
154[ 0.000000] Hierarchical RCU implementation.
155[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
156[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
157[ 0.000000] Offload RCU callbacks from all CPUs
158[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
159[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
160[ 0.000000] spurious 8259A interrupt: IRQ7.
161[ 0.000000] Console: colour dummy device 80x25
162[ 0.000000] console [tty0] enabled
163[ 0.000000] console [ttyS0] enabled
164[ 0.000000] allocated 4194304 bytes of page_cgroup
165[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
166[ 0.000000] hpet clockevent registered
167[ 0.000000] tsc: Fast TSC calibration using PIT
168[ 0.004000] tsc: Detected 2311.706 MHz processor
169[ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4623.41 BogoMIPS (lpj=9246824)
170[ 0.010659] pid_max: default: 32768 minimum: 301
171[ 0.015328] Security Framework initialized
172[ 0.019476] AppArmor: AppArmor initialized
173[ 0.023590] Yama: becoming mindful.
174[ 0.027260] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
175[ 0.035127] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
176[ 0.042367] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
177[ 0.049082] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
178[ 0.056536] Initializing cgroup subsys memory
179[ 0.060914] Initializing cgroup subsys devices
180[ 0.065383] Initializing cgroup subsys freezer
181[ 0.069839] Initializing cgroup subsys blkio
182[ 0.074120] Initializing cgroup subsys perf_event
183[ 0.078837] Initializing cgroup subsys hugetlb
184[ 0.083315] tseg: 0000000000
185[ 0.083327] CPU: Physical Processor ID: 0
186[ 0.087352] CPU: Processor Core ID: 0
187[ 0.091031] mce: CPU supports 6 MCE banks
188[ 0.095073] LVT offset 0 assigned for vector 0xf9
189[ 0.099791] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
190[ 0.099791] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
191[ 0.099791] tlb_flushall_shift: 4
192[ 0.114553] Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
193[ 0.123475] ACPI: Core revision 20131115
194[ 0.128658] ACPI: All ACPI Tables successfully acquired
195[ 0.133960] ftrace: allocating 28408 entries in 111 pages
196[ 0.153998] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
197[ 0.199547] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8356 (fam: 10, model: 02, stepping: 02)
198[ 0.316788] Performance Events: AMD PMU driver.
199[ 0.321371] ... version: 0
200[ 0.325390] ... bit width: 48
201[ 0.329498] ... generic registers: 4
202[ 0.333512] ... value mask: 0000ffffffffffff
203[ 0.338825] ... max period: 00007fffffffffff
204[ 0.344139] ... fixed-purpose events: 0
205[ 0.348160] ... event mask: 000000000000000f
206[ 0.356056] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
207[ 0.364213] x86: Booting SMP configuration:
208[ 0.368401] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
209[ 0.561679] x86: Booted up 1 node, 8 CPUs
210[ 0.565901] smpboot: Total of 8 processors activated (36988.90 BogoMIPS)
211[ 0.577738] devtmpfs: initialized
212[ 0.584713] EVM: security.selinux
213[ 0.588037] EVM: security.SMACK64
214[ 0.591365] EVM: security.ima
215[ 0.594339] EVM: security.capability
216[ 0.599284] pinctrl core: initialized pinctrl subsystem
217[ 0.604608] regulator-dummy: no parameters
218[ 0.608766] RTC time: 21:23:56, date: 01/28/15
219[ 0.613269] NET: Registered protocol family 16
220[ 0.617868] cpuidle: using governor ladder
221[ 0.621973] cpuidle: using governor menu
222[ 0.625913] node 0 link 1: io port [1000, 3fff]
223[ 0.625916] TOM: 0000000040000000 aka 1024M
224[ 0.630104] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
225[ 0.630107] node 0 link 1: mmio [dc000000, dc3fffff]
226[ 0.630110] node 0 link 1: mmio [d4000000, d7ffffff]
227[ 0.630113] bus: [bus 00-05] on node 0 link 1
228[ 0.630114] bus: 00 [io 0x0000-0xffff]
229[ 0.630116] bus: 00 [mem 0xd8000000-0xdfffffff]
230[ 0.630118] bus: 00 [mem 0x40000000-0xd7ffffff]
231[ 0.630119] bus: 00 [mem 0xf0000000-0xfcffffffff]
232[ 0.630206] ACPI: bus type PCI registered
233[ 0.634222] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
234[ 0.640737] PCI: Using configuration type 1 for base access
235[ 0.646311] PCI: Using configuration type 1 for extended access
236[ 0.652581] mtrr: your CPUs had inconsistent variable MTRR settings
237[ 0.658853] mtrr: probably your BIOS does not setup all CPUs.
238[ 0.664600] mtrr: corrected configuration.
239[ 0.669650] bio: create slab <bio-0> at 0
240[ 0.673942] ACPI: Added _OSI(Module Device)
241[ 0.678132] ACPI: Added _OSI(Processor Device)
242[ 0.682588] ACPI: Added _OSI(3.0 _SCP Extensions)
243[ 0.687301] ACPI: Added _OSI(Processor Aggregator Device)
244[ 0.695452] ACPI: Interpreter enabled
245[ 0.699136] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
246[ 0.708429] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
247[ 0.717702] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580)
248[ 0.726978] ACPI: (supports S0 S1 S5)
249[ 0.730652] ACPI: Using IOAPIC for interrupt routing
250[ 0.735656] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
251[ 0.744875] ACPI: No dock devices found.
252[ 0.767488] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
253[ 0.773684] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
254[ 0.781893] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
255[ 0.818659] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
256[ 0.828651] PCI host bridge to bus 0000:00
257[ 0.832762] pci_bus 0000:00: root bus resource [bus 00-05]
258[ 0.838255] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
259[ 0.844445] pci_bus 0000:00: root bus resource [mem 0xd4000000-0xd7ffffff]
260[ 0.851326] pci_bus 0000:00: root bus resource [mem 0xdc000000-0xdc3fffff]
261[ 0.858209] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
262[ 0.864409] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
263[ 0.864575] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
264[ 0.864582] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
265[ 0.864683] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
266[ 0.864690] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
267[ 0.864712] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
268[ 0.864726] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
269[ 0.864758] pci 0000:00:01.1: PME# supported from D3hot D3cold
270[ 0.864835] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
271[ 0.864845] pci 0000:00:02.0: reg 0x10: [mem 0xdc300000-0xdc300fff]
272[ 0.864888] pci 0000:00:02.0: supports D1 D2
273[ 0.864898] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
274[ 0.864943] pci 0000:00:02.0: System wakeup disabled by ACPI
275[ 0.870644] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
276[ 0.870655] pci 0000:00:02.1: reg 0x10: [mem 0xdc303000-0xdc3030ff]
277[ 0.870695] pci 0000:00:02.1: supports D1 D2
278[ 0.870714] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
279[ 0.870799] pci 0000:00:02.1: System wakeup disabled by ACPI
280[ 0.876500] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
281[ 0.876516] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
282[ 0.876642] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
283[ 0.876652] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
284[ 0.876656] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
285[ 0.876660] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
286[ 0.876665] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
287[ 0.876669] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
288[ 0.876673] pci 0000:00:07.0: reg 0x24: [mem 0xdc301000-0xdc301fff]
289[ 0.876779] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
290[ 0.876789] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
291[ 0.876794] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
292[ 0.876798] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
293[ 0.876802] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
294[ 0.876806] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
295[ 0.876811] pci 0000:00:08.0: reg 0x24: [mem 0xdc302000-0xdc302fff]
296[ 0.876922] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
297[ 0.877003] pci 0000:00:09.0: System wakeup disabled by ACPI
298[ 0.882706] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
299[ 0.882748] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
300[ 0.882796] pci 0000:00:0b.0: System wakeup disabled by ACPI
301[ 0.888495] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
302[ 0.888538] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
303[ 0.888619] pci 0000:00:0c.0: System wakeup disabled by ACPI
304[ 0.894317] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
305[ 0.894341] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
306[ 0.894439] pci 0000:00:0d.0: System wakeup disabled by ACPI
307[ 0.900138] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
308[ 0.900171] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
309[ 0.900259] pci 0000:00:0e.0: System wakeup disabled by ACPI
310[ 0.905975] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
311[ 0.906089] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
312[ 0.906181] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
313[ 0.906285] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
314[ 0.906391] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
315[ 0.906492] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
316[ 0.906599] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
317[ 0.906698] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
318[ 0.906795] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
319[ 0.906886] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
320[ 0.907027] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
321[ 0.907041] pci 0000:01:04.0: reg 0x10: [mem 0xd4000000-0xd7ffffff pref]
322[ 0.907052] pci 0000:01:04.0: reg 0x14: [mem 0xdc000000-0xdc03ffff]
323[ 0.907058] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
324[ 0.907104] pci 0000:01:04.0: supports D1 D2
325[ 0.907172] pci 0000:00:09.0: PCI bridge to [bus 01]
326[ 0.912159] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
327[ 0.912162] pci 0000:00:09.0: bridge window [mem 0xdc000000-0xdc0fffff]
328[ 0.912165] pci 0000:00:09.0: bridge window [mem 0xd4000000-0xd7ffffff pref]
329[ 0.912237] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
330[ 0.912267] pci 0000:02:00.0: reg 0x10: [mem 0xdc100000-0xdc10ffff 64bit]
331[ 0.912301] pci 0000:02:00.0: reg 0x30: [mem 0x78400000-0x7840ffff pref]
332[ 0.912362] pci 0000:02:00.0: PME# supported from D3hot D3cold
333[ 0.912410] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
334[ 0.922420] pci 0000:00:0b.0: PCI bridge to [bus 02]
335[ 0.927398] pci 0000:00:0b.0: bridge window [mem 0xdc100000-0xdc1fffff]
336[ 0.927486] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
337[ 0.927518] pci 0000:03:00.0: reg 0x10: [mem 0xdc200000-0xdc20ffff 64bit]
338[ 0.927611] pci 0000:03:00.0: PME# supported from D3hot D3cold
339[ 0.927668] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
340[ 0.937674] pci 0000:00:0c.0: PCI bridge to [bus 03]
341[ 0.942644] pci 0000:00:0c.0: bridge window [mem 0xdc200000-0xdc2fffff]
342[ 0.942701] pci 0000:00:0d.0: PCI bridge to [bus 04]
343[ 0.947726] pci 0000:00:0e.0: PCI bridge to [bus 05]
344[ 0.952826] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
345[ 0.958958] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
346[ 0.965068] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
347[ 0.972346] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
348[ 0.979621] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
349[ 0.986898] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
350[ 0.994176] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
351[ 1.000284] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
352[ 1.006396] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
353[ 1.013685] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
354[ 1.020958] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
355[ 1.028232] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
356[ 1.034345] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
357[ 1.040457] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
358[ 1.047733] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0
359[ 1.054034] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0
360[ 1.060345] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
361[ 1.068853] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0
362[ 1.074316] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0
363[ 1.079783] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
364[ 1.086247] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
365[ 1.092781] ACPI: Enabled 1 GPEs in block 00 to 1F
366[ 1.097638] ACPI: \_SB_.PCI0: notify handler is installed
367[ 1.097670] Found 1 acpi root devices
368[ 1.097895] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
369[ 1.106011] vgaarb: loaded
370[ 1.108727] vgaarb: bridge control possible 0000:01:04.0
371[ 1.114340] SCSI subsystem initialized
372[ 1.118190] libata version 3.00 loaded.
373[ 1.118216] ACPI: bus type USB registered
374[ 1.122261] usbcore: registered new interface driver usbfs
375[ 1.127767] usbcore: registered new interface driver hub
376[ 1.133120] usbcore: registered new device driver usb
377[ 1.138364] PCI: Using ACPI for IRQ routing
378[ 1.142563] PCI: pci_cache_line_size set to 64 bytes
379[ 1.142615] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
380[ 1.142619] e820: reserve RAM buffer [mem 0x3ffb0000-0x3fffffff]
381[ 1.142758] NetLabel: Initializing
382[ 1.146174] NetLabel: domain hash size = 128
383[ 1.150541] NetLabel: protocols = UNLABELED CIPSOv4
384[ 1.155525] NetLabel: unlabeled traffic allowed by default
385[ 1.161195] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
386[ 1.168256] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
387[ 1.173328] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
388[ 1.182136] Switched to clocksource hpet
389[ 1.194861] AppArmor: AppArmor Filesystem Enabled
390[ 1.199656] pnp: PnP ACPI init
391[ 1.202752] ACPI: bus type PNP registered
392[ 1.207194] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
393[ 1.207248] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
394[ 1.207302] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
395[ 1.207353] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
396[ 1.207381] pnp 00:04: [dma 2]
397[ 1.207404] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
398[ 1.207477] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
399[ 1.207488] pnp: PnP ACPI: found 6 devices
400[ 1.211592] ACPI: bus type PNP unregistered
401[ 1.222777] pci 0000:02:00.0: no compatible bridge window for [mem 0x78400000-0x7840ffff pref]
402[ 1.231439] pci 0000:00:0b.0: BAR 15: can't assign mem pref (size 0x100000)
403[ 1.238408] pci 0000:00:09.0: PCI bridge to [bus 01]
404[ 1.243380] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
405[ 1.249483] pci 0000:00:09.0: bridge window [mem 0xdc000000-0xdc0fffff]
406[ 1.256279] pci 0000:00:09.0: bridge window [mem 0xd4000000-0xd7ffffff pref]
407[ 1.263511] pci 0000:02:00.0: BAR 6: assigned [mem 0xdc110000-0xdc11ffff pref]
408[ 1.270744] pci 0000:00:0b.0: PCI bridge to [bus 02]
409[ 1.275720] pci 0000:00:0b.0: bridge window [mem 0xdc100000-0xdc1fffff]
410[ 1.282520] pci 0000:00:0c.0: PCI bridge to [bus 03]
411[ 1.287498] pci 0000:00:0c.0: bridge window [mem 0xdc200000-0xdc2fffff]
412[ 1.294301] pci 0000:00:0d.0: PCI bridge to [bus 04]
413[ 1.299281] pci 0000:00:0e.0: PCI bridge to [bus 05]
414[ 1.304258] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
415[ 1.313313] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
416[ 1.313316] pci_bus 0000:00: resource 5 [mem 0xd4000000-0xd7ffffff]
417[ 1.313318] pci_bus 0000:00: resource 6 [mem 0xdc000000-0xdc3fffff]
418[ 1.313320] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7]
419[ 1.313322] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
420[ 1.313324] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdc0fffff]
421[ 1.313326] pci_bus 0000:01: resource 2 [mem 0xd4000000-0xd7ffffff pref]
422[ 1.313329] pci_bus 0000:02: resource 1 [mem 0xdc100000-0xdc1fffff]
423[ 1.313331] pci_bus 0000:03: resource 1 [mem 0xdc200000-0xdc2fffff]
424[ 1.313392] NET: Registered protocol family 2
425[ 1.318003] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
426[ 1.325127] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
427[ 1.331758] TCP: Hash tables configured (established 8192 bind 8192)
428[ 1.338212] TCP: reno registered
429[ 1.341457] UDP hash table entries: 512 (order: 2, 16384 bytes)
430[ 1.347401] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
431[ 1.353868] NET: Registered protocol family 1
432[ 1.358499] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
433[ 1.364516] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
434[ 1.370400] pci 0000:00:00.0: Found enabled HT MSI Mapping
435[ 1.375936] pci 0000:00:00.0: Found enabled HT MSI Mapping
436[ 1.381444] pci 0000:00:0b.0: Found disabled HT MSI Mapping
437[ 1.387035] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.392579] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.398086] pci 0000:00:0c.0: Found disabled HT MSI Mapping
440[ 1.403670] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.409199] pci 0000:00:00.0: Found enabled HT MSI Mapping
442[ 1.414711] pci 0000:00:0d.0: Found disabled HT MSI Mapping
443[ 1.420295] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.425837] pci 0000:00:00.0: Found enabled HT MSI Mapping
445[ 1.431335] pci 0000:00:0e.0: Found disabled HT MSI Mapping
446[ 1.436933] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.442454] pci 0000:01:04.0: Boot video device
448[ 1.442462] PCI: CLS 64 bytes, default 64
449[ 1.442577] Trying to unpack rootfs image as initramfs...
450[ 1.694419] Freeing initrd memory: 12996K (ffff88003f1d8000 - ffff88003fe89000)
451[ 1.702169] platform rtc_cmos: registered platform RTC device (no PNP device found)
452[ 1.710105] LVT offset 1 assigned for vector 0x400
453[ 1.714922] IBS: LVT offset 1 assigned
454[ 1.718718] perf: AMD IBS detected (0x00000007)
455[ 1.723304] microcode: CPU0: patch_level=0x01000095
456[ 1.728207] microcode: CPU1: patch_level=0x01000095
457[ 1.733111] microcode: CPU2: patch_level=0x01000095
458[ 1.738017] microcode: CPU3: patch_level=0x01000095
459[ 1.742921] microcode: CPU4: patch_level=0x01000095
460[ 1.747820] microcode: CPU5: patch_level=0x01000095
461[ 1.752723] microcode: CPU6: patch_level=0x01000095
462[ 1.757619] microcode: CPU7: patch_level=0x01000095
463[ 1.762607] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
464[ 1.771404] Scanning for low memory corruption every 60 seconds
465[ 1.777676] Initialise system trusted keyring
466[ 1.782100] audit: initializing netlink socket (disabled)
467[ 1.787533] type=2000 audit(1422480235.528:1): initialized
468[ 1.821376] HugeTLB registered 2 MB page size, pre-allocated 0 pages
469[ 1.829327] VFS: Disk quotas dquot_6.5.2
470[ 1.833328] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
471[ 1.840378] fuse init (API version 7.22)
472[ 1.844395] msgmni has been set to 1980
473[ 1.848321] Key type big_key registered
474[ 1.852776] Key type asymmetric registered
475[ 1.856892] Asymmetric key parser 'x509' registered
476[ 1.861821] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
477[ 1.869292] io scheduler noop registered
478[ 1.873226] io scheduler deadline registered (default)
479[ 1.878404] io scheduler cfq registered
480[ 1.882402] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
481[ 1.882478] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
482[ 1.882548] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
483[ 1.882618] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
484[ 1.882706] aer 0000:00:0b.0:pcie02: service driver aer loaded
485[ 1.882726] aer 0000:00:0c.0:pcie02: service driver aer loaded
486[ 1.882746] aer 0000:00:0d.0:pcie02: service driver aer loaded
487[ 1.882763] aer 0000:00:0e.0:pcie02: service driver aer loaded
488[ 1.882776] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
489[ 1.889746] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
490[ 1.896285] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
491[ 1.896293] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
492[ 1.903259] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
493[ 1.909794] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
494[ 1.909802] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
495[ 1.916773] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
496[ 1.916780] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
497[ 1.923755] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
498[ 1.923770] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
499[ 1.929367] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
500[ 1.936054] ipmi message handler version 39.2
501[ 1.940495] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
502[ 1.948686] ACPI: Power Button [PWRB]
503[ 1.952409] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
504[ 1.959809] ACPI: Power Button [PWRF]
505[ 1.963725] GHES: HEST is not enabled!
506[ 1.967584] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
507[ 1.994256] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
508[ 2.021878] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
509[ 2.031084] Linux agpgart interface v0.103
510[ 2.037169] brd: module loaded
511[ 2.041245] loop: module loaded
512[ 2.044960] libphy: Fixed MDIO Bus: probed
513[ 2.049184] tun: Universal TUN/TAP device driver, 1.6
514[ 2.054245] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
515[ 2.060488] PPP generic driver version 2.4.2
516[ 2.064821] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
517[ 2.071364] ehci-pci: EHCI PCI platform driver
518[ 2.075971] ehci-pci 0000:00:02.1: EHCI Host Controller
519[ 2.081212] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
520[ 2.088625] ehci-pci 0000:00:02.1: debug port 1
521[ 2.093201] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
522[ 2.093229] ehci-pci 0000:00:02.1: irq 22, io mem 0xdc303000
523[ 2.110283] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
524[ 2.116122] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
525[ 2.122922] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
526[ 2.130152] usb usb1: Product: EHCI Host Controller
527[ 2.135038] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
528[ 2.141401] usb usb1: SerialNumber: 0000:00:02.1
529[ 2.146163] hub 1-0:1.0: USB hub found
530[ 2.149932] hub 1-0:1.0: 10 ports detected
531[ 2.154296] ehci-platform: EHCI generic platform driver
532[ 2.159543] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
533[ 2.165731] ohci-pci: OHCI PCI platform driver
534[ 2.170289] ohci-pci 0000:00:02.0: OHCI PCI host controller
535[ 2.175877] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
536[ 2.183300] ohci-pci 0000:00:02.0: irq 23, io mem 0xdc300000
537[ 2.244327] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
538[ 2.251134] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
539[ 2.258368] usb usb2: Product: OHCI PCI host controller
540[ 2.263604] usb usb2: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
541[ 2.269966] usb usb2: SerialNumber: 0000:00:02.0
542[ 2.274835] hub 2-0:1.0: USB hub found
543[ 2.278622] hub 2-0:1.0: 10 ports detected
544[ 2.283000] ohci-platform: OHCI generic platform driver
545[ 2.288256] uhci_hcd: USB Universal Host Controller Interface driver
546[ 2.294695] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
547[ 2.305164] serio: i8042 KBD port at 0x60,0x64 irq 1
548[ 2.310165] serio: i8042 AUX port at 0x60,0x64 irq 12
549[ 2.315437] mousedev: PS/2 mouse device common for all mice
550[ 2.321253] rtc_cmos rtc_cmos: RTC can wake from S4
551[ 2.326357] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
552[ 2.332758] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
553[ 2.340684] device-mapper: uevent: version 1.0.3
554[ 2.345397] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
555[ 2.353857] ledtrig-cpu: registered to indicate activity on CPUs
556[ 2.360035] TCP: cubic registered
557[ 2.363481] NET: Registered protocol family 10
558[ 2.368218] NET: Registered protocol family 17
559[ 2.372686] Key type dns_resolver registered
560[ 2.377482] Loading compiled-in X.509 certificates
561[ 2.383513] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
562[ 2.393032] registered taskstats version 1
563[ 2.400817] Key type trusted registered
564[ 2.407526] Key type encrypted registered
565[ 2.414416] AppArmor: AppArmor sha1 policy hashing enabled
566[ 2.419914] IMA: No TPM chip found, activating TPM-bypass!
567[ 2.425714] regulator-dummy: disabling
568[ 2.429545] Magic number: 15:125:400
569[ 2.433474] rtc_cmos rtc_cmos: setting system clock to 2015-01-28 21:23:57 UTC (1422480237)
570[ 2.441976] acpi-cpufreq: overriding BIOS provided _PSD data
571[ 2.447983] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
572[ 2.454002] EDD information not available.
573[ 2.706373] tsc: Refined TSC clocksource calibration: 2311.847 MHz
574[ 3.710598] Switched to clocksource tsc
575[ 14.504073] PM: Hibernation image not present or could not be loaded.
576[ 14.506497] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
577[ 14.514375] Write protecting the kernel read-only data: 12288k
578[ 14.523524] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
579[ 14.533944] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
580[ 14.567881] systemd-udevd[146]: starting version 204
581[ 14.602263] FS-Cache: Loaded
582[ 14.605999] pps_core: LinuxPPS API ver. 1 registered
583[ 14.611906] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
584[ 14.621784] RPC: Registered named UNIX socket transport module.
585[ 14.627748] RPC: Registered udp transport module.
586[ 14.632488] RPC: Registered tcp transport module.
587[ 14.637243] RPC: Registered tcp NFSv4.1 backchannel transport module.
588[ 14.643811] PTP clock support registered
589[ 14.652555] tg3.c:v3.134 (Sep 16, 2013)
590[ 14.656434] tg3 0000:02:00.0: enabling device (0004 -> 0006)
591[ 14.662356] FS-Cache: Netfs 'nfs' registered for caching
592[ 14.662469] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
593[ 14.701039] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
594[ 14.711322] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
595[ 14.721067] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
596[ 14.728906] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
597[ 14.735699] tg3 0000:03:00.0: enabling device (0004 -> 0006)
598[ 14.741569] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
599[ 14.766195] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
600[ 14.776465] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
601[ 14.786210] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
602[ 14.794035] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
603[ 14.804920] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
604[ 14.852172] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
605[ 18.773084] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
606[ 18.779717] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
607[ 18.786618] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
608[ 19.323848] random: init urandom read with 29 bits of entropy available
609[ 19.550954] init: plymouth-upstart-bridge main process (204) terminated with status 1
610[ 19.558859] init: plymouth-upstart-bridge main process ended, respawning
611[ 19.599609] init: plymouth-upstart-bridge main process (214) terminated with status 1
612[ 19.607510] init: plymouth-upstart-bridge main process ended, respawning
613[ 19.632177] init: plymouth-upstart-bridge main process (217) terminated with status 1
614[ 19.640084] init: plymouth-upstart-bridge main process ended, respawning
615[ 19.669157] init: plymouth-upstart-bridge main process (220) terminated with status 1
616[ 19.677039] init: plymouth-upstart-bridge main process ended, respawning
617[ 20.325682] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
618[ 20.483666] systemd-udevd[340]: starting version 204
619[ 20.552135] random: nonblocking pool is initialized
620[ 20.763390] w83627hf: w83627hf: Found W83627THF chip at 0x290
621[ 20.873150] MCE: In-kernel MCE decoding enabled.
622[ 20.875084] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
623[ 20.883595] pata_amd 0000:00:06.0: version 0.4.1
624[ 20.884199] scsi0 : pata_amd
625[ 20.884340] scsi1 : pata_amd
626[ 20.884395] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
627[ 20.884397] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
628[ 20.884492] sata_nv 0000:00:07.0: version 3.5
629[ 20.884759] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
630[ 20.885717] scsi2 : sata_nv
631[ 20.886150] scsi3 : sata_nv
632[ 20.886281] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
633[ 20.886285] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
634[ 20.886835] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
635[ 20.887520] scsi4 : sata_nv
636[ 20.888283] scsi5 : sata_nv
637[ 20.888383] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
638[ 20.888385] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
639[ 20.888680] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
640[ 20.889246] Floppy drive(s): fd0 is 1.44M
641[ 20.890305] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
642[ 20.898311] EDAC MC: Ver: 3.0.0
643[ 20.900306] input: PC Speaker as /devices/platform/pcspkr/input/input4
644[ 20.909942] FDC 0 is a post-1991 82077
645[ 20.930924] xgifb: module is from the staging directory, the quality is unknown, you have been warned.
646[ 20.931850] xgifb 0000:01:04.0: Relocate IO address: 1000 [00001030]
647[ 20.931883] xgifb 0000:01:04.0: chipid = 31
648[ 20.932537] xgifb 0000:01:04.0: Framebuffer at 0xd4000000, mapped to 0xffffc90000980000, size 16384k
649[ 20.932540] xgifb 0000:01:04.0: MMIO at 0xdc000000, mapped to 0xffffc90000580000, size 256k
650[ 20.932571] xgifb 0000:01:04.0: Video BIOS corrupted
651[ 20.938050] AMD64 EDAC driver v3.4.0
652[ 20.945377] xgifb 0000:01:04.0: No or unknown bridge type detected
653[ 20.945385] xgifb: Default mode is 800x600x16 (60Hz)
654[ 20.948062] xgifb 0000:01:04.0: Added MTRR
655[ 20.949449] fbcon: XGI (fb0) is primary device
656[ 20.950133] Console: switching to colour frame buffer device 100x37
657[ 20.970350] kvm: Nested Virtualization enabled
658[ 20.970362] kvm: Nested Paging enabled
659[ 21.069121] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
660[ 21.069145] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
661[ 21.197045] ata3: SATA link down (SStatus 0 SControl 300)
662[ 21.197051] ata5: SATA link down (SStatus 0 SControl 300)
663[ 21.305677] init: failsafe main process (476) killed by TERM signal
664[ 21.529106] ata4: SATA link down (SStatus 0 SControl 300)
665[ 21.841142] ata6: SATA link down (SStatus 0 SControl 300)
666[ 24.341516] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
667[ 24.341617] EDAC amd64: DRAM ECC enabled.
668[ 24.341650] EDAC amd64: F10h detected (node 0).
669[ 24.341677] EDAC MC: DCT0 chip selects:
670[ 24.341680] EDAC amd64: MC: 0: 1024MB 1: 0MB
671[ 24.341681] EDAC amd64: MC: 2: 0MB 3: 0MB
672[ 24.341683] EDAC amd64: MC: 4: 0MB 5: 0MB
673[ 24.341685] EDAC amd64: MC: 6: 0MB 7: 0MB
674[ 24.341686] EDAC MC: DCT1 chip selects:
675[ 24.341687] EDAC amd64: MC: 0: 0MB 1: 0MB
676[ 24.341689] EDAC amd64: MC: 2: 0MB 3: 0MB
677[ 24.341711] EDAC amd64: MC: 4: 0MB 5: 0MB
678[ 24.341713] EDAC amd64: MC: 6: 0MB 7: 0MB
679[ 24.341715] EDAC amd64: using x4 syndromes.
680[ 24.341717] EDAC amd64: MCT channel count: 1
681[ 24.341798] EDAC amd64: CS0: Registered DDR2 RAM
682[ 24.342037] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
683[ 24.342077] EDAC amd64: DRAM ECC disabled.
684[ 24.342091] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
685[ 24.342091] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
686[ 24.342091] (Note that use of the override may cause unknown side effects.)
687[ 24.342147] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
688[ 24.574138] init: plymouth-upstart-bridge main process ended, respawning
689[ 1201.321331] [Hardware Error]: MC4 Error (node 0): DRAM ECC error detected on the NB.
690[ 1201.329375] EDAC MC0: 1 CE on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x14a44 offset:0x480 grain:0 syndrome:0x9872)
691[ 1201.329382] [Hardware Error]: Error Status: Corrected error, no action required.
692[ 1201.337001] [Hardware Error]: CPU:0 (10:2:2) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc39410098080a13
693[ 1201.346695] [Hardware Error]: MC4_ADDR: 0x0000000014a44480
694[ 1201.352349] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)
695[ 1501.384549] [Hardware Error]: MC4 Error (node 0): DRAM ECC error detected on the NB.
696[ 1501.392579] EDAC MC0: 1 CE on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x14a44 offset:0x480 grain:0 syndrome:0x9872)
697[ 1501.392586] [Hardware Error]: Error Status: Corrected error, no action required.
698[ 1501.400183] [Hardware Error]: CPU:0 (10:2:2) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc39410098080a13
699[ 1501.409890] [Hardware Error]: MC4_ADDR: 0x0000000014a44480
700[ 1501.415519] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)
701[ 1801.447792] [Hardware Error]: MC4 Error (node 0): DRAM ECC error detected on the NB.
702[ 1801.455869] EDAC MC0: 1 CE on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x14a44 offset:0x480 grain:0 syndrome:0x9872)
703[ 1801.455875] [Hardware Error]: Error Status: Corrected error, no action required.
704[ 1801.463469] [Hardware Error]: CPU:0 (10:2:2) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc39410098080a13
705[ 1801.473175] [Hardware Error]: MC4_ADDR: 0x0000000014a44480
706[ 1801.478825] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)
707[ 2101.511009] [Hardware Error]: MC4 Error (node 0): DRAM ECC error detected on the NB.
708[ 2101.519067] EDAC MC0: 1 CE on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x14a44 offset:0x480 grain:0 syndrome:0x9872)
709[ 2101.519074] [Hardware Error]: Error Status: Corrected error, no action required.
710[ 2101.526677] [Hardware Error]: CPU:0 (10:2:2) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc39410098080a13
711[ 2101.536369] [Hardware Error]: MC4_ADDR: 0x0000000014a44480
712[ 2101.542007] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)
713[ 2401.574170] [Hardware Error]: MC4 Error (node 0): DRAM ECC error detected on the NB.
714[ 2401.582187] EDAC MC0: 1 CE on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x14a44 offset:0x480 grain:0 syndrome:0x9872)
715[ 2401.582194] [Hardware Error]: Error Status: Corrected error, no action required.
716[ 2401.589787] [Hardware Error]: CPU:0 (10:2:2) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc39410098080a13
717[ 2401.599472] [Hardware Error]: MC4_ADDR: 0x0000000014a44480
718[ 2401.611925] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)
719[ 2701.637343] [Hardware Error]: MC4 Error (node 0): DRAM ECC error detected on the NB.
720[ 2701.652343] EDAC MC0: 1 CE on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x14a44 offset:0x480 grain:0 syndrome:0x9872)
721[ 2701.652350] [Hardware Error]: Error Status: Corrected error, no action required.
722[ 2701.666852] [Hardware Error]: CPU:0 (10:2:2) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc39410098080a13
723[ 2701.690362] [Hardware Error]: MC4_ADDR: 0x0000000014a44480
724[ 2701.702842] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)