Gitiles
Code Review Sign In
review.coreboot.org / board-status / f0c508b2f7394ec2ebaf42ed5f7a0bd316ff5e6b / . / asrock / e350m1 / 4.3-298-gd08eb06 / 2016-02-23T17_03_09Z / kernel_log.txt
blob: 3519f09db189ea068455f72274470509e2add4cb [file] [log] [blame]
Paul Menzel5e27fcd2016-02-23 23:56:51 +0100[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt20-1+deb8u3 (2016-01-17)
5[ 0.000000] e820: BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
7[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7c53fff] usable
10[ 0.000000] BIOS-e820: [mem 0x00000000c7c54000-0x00000000dfffffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.3-298-gd08eb06 02/23/2016
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000
19[ 0.000000] MTRR default type: uncachable
20[ 0.000000] MTRR fixed ranges enabled:
21[ 0.000000] 00000-9FFFF write-back
22[ 0.000000] A0000-BFFFF uncachable
23[ 0.000000] C0000-FFFFF write-back
24[ 0.000000] MTRR variable ranges enabled:
25[ 0.000000] 0 base 000000000 mask F80000000 write-back
26[ 0.000000] 1 base 080000000 mask FC0000000 write-back
27[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 base 0FFC00000 mask FFFC00000 write-protect
32[ 0.000000] 7 disabled
33[ 0.000000] TOM2: 000000021f000000 aka 8688M
34[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
35[ 0.000000] found SMP MP-table at [mem 0x000f5010-0x000f501f] mapped at [c00f5010]
36[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
37[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
38[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
39[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
40[ 0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
41[ 0.000000] [mem 0x37200000-0x373fffff] page 2M
42[ 0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
43[ 0.000000] [mem 0x34000000-0x371fffff] page 2M
44[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
45[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
46[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
47[ 0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
48[ 0.000000] [mem 0x37400000-0x375fdfff] page 4k
49[ 0.000000] BRK [0x0179c000, 0x0179cfff] PGTABLE
50[ 0.000000] BRK [0x0179d000, 0x0179efff] PGTABLE
51[ 0.000000] BRK [0x0179f000, 0x0179ffff] PGTABLE
52[ 0.000000] BRK [0x017a0000, 0x017a0fff] PGTABLE
53[ 0.000000] RAMDISK: [mem 0x3604a000-0x3701cfff]
54[ 0.000000] ACPI: Early table checksum verification disabled
55[ 0.000000] ACPI: RSDP 0x00000000000F5210 000024 (v02 CORE )
56[ 0.000000] ACPI: XSDT 0x00000000C7C6F0E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: FACP 0x00000000C7C71740 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
58[ 0.000000] ACPI: DSDT 0x00000000C7C6F280 0024B6 (v02 ASROCK COREBOOT 00010001 INTL 20140926)
59[ 0.000000] ACPI: FACS 0x00000000C7C6F240 000040
60[ 0.000000] ACPI: FACS 0x00000000C7C6F240 000040
61[ 0.000000] ACPI: SSDT 0x00000000C7C71840 000046 (v02 CORE COREBOOT 0000002A CORE 0000002A)
62[ 0.000000] ACPI: TCPA 0x00000000C7C71890 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: APIC 0x00000000C7C718D0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
64[ 0.000000] ACPI: HEST 0x00000000C7C71930 000028 (v01 CORE COREBOOT 00000000 CORE 00000000)
65[ 0.000000] ACPI: SSDT 0x00000000C7C71960 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
66[ 0.000000] ACPI: SSDT 0x00000000C7C72FF0 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
67[ 0.000000] ACPI: HPET 0x00000000C7C733D0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: Local APIC address 0xfee00000
69[ 0.000000] 7802MB HIGHMEM available.
70[ 0.000000] 885MB LOWMEM available.
71[ 0.000000] mapped low ram: 0 - 375fe000
72[ 0.000000] low ram: 0 - 375fe000
73[ 0.000000] BRK [0x017a1000, 0x017a1fff] PGTABLE
74[ 0.000000] Zone ranges:
75[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
76[ 0.000000] Normal [mem 0x01000000-0x375fdfff]
77[ 0.000000] HighMem [mem 0x375fe000-0x1effffff]
78[ 0.000000] Movable zone start for each node
79[ 0.000000] Early memory node ranges
80[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
81[ 0.000000] node 0: [mem 0x00100000-0xc7c53fff]
82[ 0.000000] node 0: [mem 0x00000000-0x1effffff]
83[ 0.000000] On node 0 totalpages: 1993714
84[ 0.000000] free_area_init_node: node 0, pgdat c165d180, node_mem_map f1c6a020
85[ 0.000000] DMA zone: 32 pages used for memmap
86[ 0.000000] DMA zone: 0 pages reserved
87[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
88[ 0.000000] Normal zone: 1740 pages used for memmap
89[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
90[ 0.000000] HighMem zone: 15605 pages used for memmap
91[ 0.000000] HighMem zone: 1766998 pages, LIFO batch:31
92[ 0.000000] Using APIC driver default
93[ 0.000000] ACPI: PM-Timer IO Port: 0x808
94[ 0.000000] ACPI: Local APIC address 0xfee00000
95[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
96[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
97[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
98[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
99[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
100[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
101[ 0.000000] ACPI: IRQ0 used by override.
102[ 0.000000] ACPI: IRQ2 used by override.
103[ 0.000000] ACPI: IRQ9 used by override.
104[ 0.000000] Using ACPI (MADT) for SMP configuration information
105[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
106[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
107[ 0.000000] nr_irqs_gsi: 40
108[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
109[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
110[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
111[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
112[ 0.000000] Booting paravirtualized kernel on bare hardware
113[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
114[ 0.000000] PERCPU: Embedded 14 pages/cpu @f75d0000 s34752 r0 d22592 u57344
115[ 0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
116[ 0.000000] pcpu-alloc: [0] 0 [0] 1
117[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1991942
118[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-686-pae root=UUID=0198e82a-32df-4f18-bec0-3e08802b084d ro quiet noisapnp pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0
119[ 0.000000] PCIe ASPM is forcibly enabled
120[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
121[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
122[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
123[ 0.000000] Initializing CPU#0
124[ 0.000000] Initializing HighMem for node 0 (000375fe:0021f000)
125[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
126[ 0.000000] Memory: 7880288K/7974856K available (4608K kernel code, 522K rwdata, 1452K rodata, 656K init, 460K bss, 94568K reserved, 7067992K highmem)
127[ 0.000000] virtual kernel memory layout:
128 fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
129 pkmap : 0xff600000 - 0xff800000 (2048 kB)
130 vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
131 lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
132 .init : 0xc1671000 - 0xc1715000 ( 656 kB)
133 .data : 0xc148044c - 0xc166fb40 (1981 kB)
134 .text : 0xc1000000 - 0xc148044c (4609 kB)
135[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
136[ 0.000000] Hierarchical RCU implementation.
137[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
138[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
139[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
140[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
141[ 0.000000] CPU 0 irqstacks, hard=f1806000 soft=f1808000
142[ 0.000000] spurious 8259A interrupt: IRQ7.
143[ 0.000000] Console: colour VGA+ 80x25
144[ 0.000000] console [tty0] enabled
145[ 0.000000] hpet clockevent registered
146[ 0.000000] tsc: Fast TSC calibration using PIT
147[ 0.000000] tsc: Detected 1599.963 MHz processor
148[ 0.000055] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.92 BogoMIPS (lpj=6399852)
149[ 0.000062] pid_max: default: 32768 minimum: 301
150[ 0.000080] ACPI: Core revision 20140424
151[ 0.005857] ACPI: All ACPI Tables successfully acquired
152[ 0.005904] Security Framework initialized
153[ 0.005924] AppArmor: AppArmor disabled by boot time parameter
154[ 0.005928] Yama: disabled by default; enable with sysctl kernel.yama.*
155[ 0.005961] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
156[ 0.005966] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
157[ 0.006367] Initializing cgroup subsys memory
158[ 0.006379] Initializing cgroup subsys devices
159[ 0.006393] Initializing cgroup subsys freezer
160[ 0.006400] Initializing cgroup subsys net_cls
161[ 0.006412] Initializing cgroup subsys blkio
162[ 0.006420] Initializing cgroup subsys perf_event
163[ 0.006425] Initializing cgroup subsys net_prio
164[ 0.006468] CPU: Physical Processor ID: 0
165[ 0.006470] CPU: Processor Core ID: 0
166[ 0.006477] mce: CPU supports 6 MCE banks
167[ 0.006496] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
168Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
169tlb_flushall_shift: 6
170[ 0.006827] Freeing SMP alternatives memory: 20K (c1715000 - c171a000)
171[ 0.009012] ftrace: allocating 20810 entries in 41 pages
172[ 0.028379] Enabling APIC mode: Flat. Using 1 I/O APICs
173[ 0.028844] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
174[ 0.068534] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
175[ 0.176268] Performance Events: AMD PMU driver.
176[ 0.176278] ... version: 0
177[ 0.176281] ... bit width: 48
178[ 0.176283] ... generic registers: 4
179[ 0.176286] ... value mask: 0000ffffffffffff
180[ 0.176289] ... max period: 00007fffffffffff
181[ 0.176291] ... fixed-purpose events: 0
182[ 0.176294] ... event mask: 000000000000000f
183[ 0.179534] CPU 1 irqstacks, hard=f193e000 soft=f1940000
184[ 0.179543] x86: Booting SMP configuration:
185[ 0.179546] .... node #0, CPUs: #1
186[ 0.189586] Initializing CPU#1
187[ 0.192756] x86: Booted up 1 node, 2 CPUs
188[ 0.192763] smpboot: Total of 2 processors activated (6399.85 BogoMIPS)
189[ 0.193541] devtmpfs: initialized
190[ 0.196302] pinctrl core: initialized pinctrl subsystem
191[ 0.196475] NET: Registered protocol family 16
192[ 0.196698] cpuidle: using governor ladder
193[ 0.196705] cpuidle: using governor menu
194[ 0.197015] ACPI: bus type PCI registered
195[ 0.197020] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
196[ 0.197305] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
197[ 0.197309] bios32_service(0x49435024): not present
198[ 0.197312] PCI: Using configuration type 1 for base access
199[ 0.197314] PCI: Using configuration type 1 for extended access
200[ 0.210539] ACPI: Added _OSI(Module Device)
201[ 0.210548] ACPI: Added _OSI(Processor Device)
202[ 0.210551] ACPI: Added _OSI(3.0 _SCP Extensions)
203[ 0.210555] ACPI: Added _OSI(Processor Aggregator Device)
204[ 0.212811] ACPI: Executed 2 blocks of module-level executable AML code
205[ 0.217154] ACPI: Interpreter enabled
206[ 0.217176] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
207[ 0.217202] ACPI: (supports S0 S1 S3 S4 S5)
208[ 0.217206] ACPI: Using IOAPIC for interrupt routing
209[ 0.217238] HEST: Table parsing has been initialized.
210[ 0.217246] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
211[ 0.233112] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
212[ 0.233129] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
213[ 0.233266] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
214[ 0.233824] PCI host bridge to bus 0000:00
215[ 0.233831] pci_bus 0000:00: root bus resource [bus 00-ff]
216[ 0.233837] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
217[ 0.233841] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
218[ 0.233848] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
219[ 0.233853] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
220[ 0.233870] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
221[ 0.234057] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
222[ 0.234077] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
223[ 0.234088] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff]
224[ 0.234099] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
225[ 0.234167] pci 0000:00:01.0: supports D1 D2
226[ 0.234248] pci 0000:00:01.0: System wakeup disabled by ACPI
227[ 0.234341] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
228[ 0.234358] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff]
229[ 0.234437] pci 0000:00:01.1: supports D1 D2
230[ 0.234515] pci 0000:00:01.1: System wakeup disabled by ACPI
231[ 0.234707] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
232[ 0.234735] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
233[ 0.234750] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
234[ 0.234764] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
235[ 0.234779] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
236[ 0.234793] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
237[ 0.234807] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff]
238[ 0.235046] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
239[ 0.235067] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff]
240[ 0.235215] pci 0000:00:12.0: System wakeup disabled by ACPI
241[ 0.235377] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
242[ 0.235405] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff]
243[ 0.235516] pci 0000:00:12.2: supports D1 D2
244[ 0.235520] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
245[ 0.235602] pci 0000:00:12.2: System wakeup disabled by ACPI
246[ 0.235767] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
247[ 0.235788] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff]
248[ 0.235934] pci 0000:00:13.0: System wakeup disabled by ACPI
249[ 0.236054] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
250[ 0.236082] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff]
251[ 0.236193] pci 0000:00:13.2: supports D1 D2
252[ 0.236197] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
253[ 0.236279] pci 0000:00:13.2: System wakeup disabled by ACPI
254[ 0.236444] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
255[ 0.236740] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
256[ 0.236772] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit]
257[ 0.236868] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
258[ 0.237051] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
259[ 0.237346] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
260[ 0.237467] pci 0000:00:14.4: System wakeup disabled by ACPI
261[ 0.237619] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
262[ 0.237640] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff]
263[ 0.237790] pci 0000:00:14.5: System wakeup disabled by ACPI
264[ 0.237949] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
265[ 0.238057] pci 0000:00:15.0: supports D1 D2
266[ 0.238145] pci 0000:00:15.0: System wakeup disabled by ACPI
267[ 0.238306] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
268[ 0.238422] pci 0000:00:15.1: supports D1 D2
269[ 0.238510] pci 0000:00:15.1: System wakeup disabled by ACPI
270[ 0.238673] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
271[ 0.238841] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
272[ 0.239005] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
273[ 0.239172] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
274[ 0.239353] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
275[ 0.239517] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
276[ 0.239678] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
277[ 0.239845] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
278[ 0.240210] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
279[ 0.240226] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
280[ 0.240230] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
281[ 0.240235] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
282[ 0.240239] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
283[ 0.240343] pci 0000:00:15.0: PCI bridge to [bus 02]
284[ 0.240562] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
285[ 0.240592] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
286[ 0.240633] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
287[ 0.240659] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
288[ 0.240790] pci 0000:03:00.0: supports D1 D2
289[ 0.240793] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
290[ 0.249075] pci 0000:00:15.1: PCI bridge to [bus 03]
291[ 0.249104] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
292[ 0.249121] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
293[ 0.249155] pci_bus 0000:00: on NUMA node 0
294[ 0.250070] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
295[ 0.250250] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
296[ 0.250348] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
297[ 0.250445] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
298[ 0.250541] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
299[ 0.250637] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
300[ 0.250729] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
301[ 0.250906] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
302[ 0.251111] ACPI: Enabled 6 GPEs in block 00 to 1F
303[ 0.251593] vgaarb: setting as boot device: PCI:0000:00:01.0
304[ 0.251603] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
305[ 0.251614] vgaarb: loaded
306[ 0.251618] vgaarb: bridge control possible 0000:00:01.0
307[ 0.251769] PCI: Using ACPI for IRQ routing
308[ 0.251775] PCI: pci_cache_line_size set to 64 bytes
309[ 0.251929] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
310[ 0.251934] e820: reserve RAM buffer [mem 0xc7c54000-0xc7ffffff]
311[ 0.251938] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
312[ 0.252321] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
313[ 0.252330] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
314[ 0.254511] Switched to clocksource hpet
315[ 0.265185] pnp: PnP ACPI init
316[ 0.265217] ACPI: bus type PNP registered
317[ 0.265672] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
318[ 0.265950] pnp: PnP ACPI: found 1 devices
319[ 0.265953] ACPI: bus type PNP unregistered
320[ 0.265960] PnPBIOS: Disabled by ACPI PNP
321[ 0.310499] pci 0000:00:14.4: PCI bridge to [bus 01]
322[ 0.310535] pci 0000:00:15.0: PCI bridge to [bus 02]
323[ 0.310552] pci 0000:00:15.1: PCI bridge to [bus 03]
324[ 0.310560] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
325[ 0.310572] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
326[ 0.310584] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
327[ 0.310589] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
328[ 0.310594] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
329[ 0.310598] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
330[ 0.310603] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
331[ 0.310607] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
332[ 0.310612] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
333[ 0.310616] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
334[ 0.310621] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
335[ 0.310625] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
336[ 0.310788] NET: Registered protocol family 2
337[ 0.311391] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
338[ 0.311422] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
339[ 0.311460] TCP: Hash tables configured (established 8192 bind 8192)
340[ 0.311508] TCP: reno registered
341[ 0.311514] UDP hash table entries: 512 (order: 2, 16384 bytes)
342[ 0.311526] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
343[ 0.311762] NET: Registered protocol family 1
344[ 0.311796] pci 0000:00:01.0: Video device with shadowed ROM
345[ 0.423881] PCI: CLS 64 bytes, default 64
346[ 0.424010] Unpacking initramfs...
347[ 1.061174] Freeing initrd memory: 16204K (f604a000 - f701d000)
348[ 1.061713] microcode: CPU0: patch_level=0x05000119
349[ 1.061837] microcode: CPU1: patch_level=0x05000119
350[ 1.062182] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
351[ 1.062205] LVT offset 0 assigned for vector 0x400
352[ 1.062334] perf: AMD IBS detected (0x000000ff)
353[ 1.063125] futex hash table entries: 512 (order: 3, 32768 bytes)
354[ 1.063284] audit: initializing netlink subsys (disabled)
355[ 1.063331] audit: type=2000 audit(1456268144.956:1): initialized
356[ 1.064110] HugeTLB registered 2 MB page size, pre-allocated 0 pages
357[ 1.064141] zbud: loaded
358[ 1.064707] VFS: Disk quotas dquot_6.5.2
359[ 1.064852] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
360[ 1.065073] msgmni has been set to 1618
361[ 1.066564] alg: No test for stdrng (krng)
362[ 1.066647] bounce: pool size: 64 pages
363[ 1.066701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
364[ 1.066857] io scheduler noop registered
365[ 1.066863] io scheduler deadline registered
366[ 1.066999] io scheduler cfq registered (default)
367[ 1.067576] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
368[ 1.068010] pcieport 0000:00:15.1: irq 41 for MSI/MSI-X
369[ 1.068261] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
370[ 1.068269] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
371[ 1.068303] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
372[ 1.068308] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
373[ 1.068315] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
374[ 1.068350] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
375[ 1.068388] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
376[ 1.068506] GHES: Failed to enable APEI firmware first mode.
377[ 1.068517] isapnp: ISA Plug & Play support disabled
378[ 1.068884] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
379[ 1.089583] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
380[ 1.091214] Linux agpgart interface v0.103
381[ 1.091592] i8042: PNP: No PS/2 controller found. Probing ports directly.
382[ 1.095507] serio: i8042 KBD port at 0x60,0x64 irq 1
383[ 1.095528] serio: i8042 AUX port at 0x60,0x64 irq 12
384[ 1.096380] mousedev: PS/2 mouse device common for all mice
385[ 1.096591] rtc_cmos 00:00: RTC can wake from S4
386[ 1.097063] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
387[ 1.097180] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
388[ 1.097222] ledtrig-cpu: registered to indicate activity on CPUs
389[ 1.097553] TCP: cubic registered
390[ 1.097717] NET: Registered protocol family 10
391[ 1.098236] mip6: Mobile IPv6
392[ 1.098243] NET: Registered protocol family 17
393[ 1.098255] mpls_gso: MPLS GSO support
394[ 1.098714] Using IPI No-Shortcut mode
395[ 1.099239] registered taskstats version 1
396[ 1.100056] rtc_cmos 00:00: setting system clock to 2016-02-23 22:55:45 UTC (1456268145)
397[ 1.100159] PM: Hibernation image not present or could not be loaded.
398[ 1.100724] Freeing unused kernel memory: 656K (c1671000 - c1715000)
399[ 1.100876] Write protecting the kernel text: 4612k
400[ 1.101020] Write protecting the kernel read-only data: 1456k
401[ 1.101022] NX-protecting the kernel data: 3580k
402[ 1.199333] systemd-udevd[61]: starting version 215
403[ 1.200186] random: systemd-udevd urandom read with 0 bits of entropy available
404[ 1.221454] ACPI: bus type USB registered
405[ 1.221522] usbcore: registered new interface driver usbfs
406[ 1.221549] usbcore: registered new interface driver hub
407[ 1.229057] usbcore: registered new device driver usb
408[ 1.230209] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
409[ 1.231319] SCSI subsystem initialized
410[ 1.231469] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
411[ 1.231798] ehci-pci: EHCI PCI platform driver
412[ 1.232218] QUIRK: Enable AMD PLL fix
413[ 1.232259] ehci-pci 0000:00:12.2: EHCI Host Controller
414[ 1.232274] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
415[ 1.232288] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
416[ 1.232373] ehci-pci 0000:00:12.2: debug port 1
417[ 1.232445] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000
418[ 1.235478] libata version 3.00 loaded.
419[ 1.241095] thermal LNXTHERM:00: registered as thermal_zone0
420[ 1.241105] ACPI: Thermal Zone [TZ00] (45 C)
421[ 1.242702] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
422[ 1.242827] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
423[ 1.242833] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
424[ 1.242838] usb usb1: Product: EHCI Host Controller
425[ 1.242842] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
426[ 1.242846] usb usb1: SerialNumber: 0000:00:12.2
427[ 1.243144] hub 1-0:1.0: USB hub found
428[ 1.243162] hub 1-0:1.0: 5 ports detected
429[ 1.243956] ehci-pci 0000:00:13.2: EHCI Host Controller
430[ 1.243970] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
431[ 1.243978] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
432[ 1.243995] ehci-pci 0000:00:13.2: debug port 1
433[ 1.244050] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000
434[ 1.251482] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
435[ 1.251948] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
436[ 1.252297] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf7e50000, bc:5f:f4:c8:d3:98, XID 0c200000 IRQ 42
437[ 1.252303] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
438[ 1.254781] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
439[ 1.254911] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
440[ 1.254917] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
441[ 1.254922] usb usb2: Product: EHCI Host Controller
442[ 1.254926] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
443[ 1.254930] usb usb2: SerialNumber: 0000:00:13.2
444[ 1.255463] hub 2-0:1.0: USB hub found
445[ 1.255510] hub 2-0:1.0: 5 ports detected
446[ 1.256264] ahci 0000:00:11.0: version 3.0
447[ 1.256502] ohci-pci: OHCI PCI platform driver
448[ 1.256882] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
449[ 1.256889] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
450[ 1.265856] scsi0 : ahci
451[ 1.270262] scsi1 : ahci
452[ 1.271219] scsi2 : ahci
453[ 1.278783] scsi3 : ahci
454[ 1.279274] scsi4 : ahci
455[ 1.290358] scsi5 : ahci
456[ 1.290625] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
457[ 1.290631] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
458[ 1.290636] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
459[ 1.290641] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
460[ 1.290646] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
461[ 1.290651] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
462[ 1.291210] ohci-pci 0000:00:12.0: OHCI PCI host controller
463[ 1.291231] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
464[ 1.291297] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000
465[ 1.351036] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
466[ 1.351046] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
467[ 1.351051] usb usb3: Product: OHCI PCI host controller
468[ 1.351055] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
469[ 1.351059] usb usb3: SerialNumber: 0000:00:12.0
470[ 1.351670] hub 3-0:1.0: USB hub found
471[ 1.351694] hub 3-0:1.0: 5 ports detected
472[ 1.352339] ohci-pci 0000:00:13.0: OHCI PCI host controller
473[ 1.352353] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
474[ 1.352401] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000
475[ 1.410969] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
476[ 1.410979] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
477[ 1.410984] usb usb4: Product: OHCI PCI host controller
478[ 1.410988] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
479[ 1.410992] usb usb4: SerialNumber: 0000:00:13.0
480[ 1.411604] hub 4-0:1.0: USB hub found
481[ 1.411629] hub 4-0:1.0: 5 ports detected
482[ 1.412278] ohci-pci 0000:00:14.5: OHCI PCI host controller
483[ 1.412291] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
484[ 1.412344] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000
485[ 1.470963] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
486[ 1.470973] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
487[ 1.470978] usb usb5: Product: OHCI PCI host controller
488[ 1.470982] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
489[ 1.470986] usb usb5: SerialNumber: 0000:00:14.5
490[ 1.471604] hub 5-0:1.0: USB hub found
491[ 1.471629] hub 5-0:1.0: 2 ports detected
492[ 1.610844] ata5: SATA link down (SStatus 0 SControl 300)
493[ 1.610912] ata1: SATA link down (SStatus 0 SControl 300)
494[ 1.610950] ata6: SATA link down (SStatus 0 SControl 300)
495[ 1.610993] ata2: SATA link down (SStatus 0 SControl 300)
496[ 1.611024] ata3: SATA link down (SStatus 0 SControl 300)
497[ 1.782837] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
498[ 1.783586] ata4.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
499[ 1.783597] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
500[ 1.784382] ata4.00: configured for UDMA/100
501[ 1.784947] scsi 3:0:0:0: Direct-Access ATA M4-CT256M4SSD2 070H PQ: 0 ANSI: 5
502[ 1.795314] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
503[ 1.795458] sd 3:0:0:0: [sda] Write Protect is off
504[ 1.795464] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
505[ 1.795509] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
506[ 1.796702] sda: sda1 sda2
507[ 1.798202] sd 3:0:0:0: [sda] Attached SCSI disk
508[ 1.799651] sd 3:0:0:0: Attached scsi generic sg0 type 0
509[ 1.854791] device-mapper: uevent: version 1.0.3
510[ 1.855607] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
511[ 1.966907] usb 3-2: new full-speed USB device number 2 using ohci-pci
512[ 2.058818] tsc: Refined TSC clocksource calibration: 1599.999 MHz
513[ 2.131949] usb 3-2: New USB device found, idVendor=1b1a, idProduct=7001
514[ 2.131967] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
515[ 2.131976] usb 3-2: Product: USB Mouse
516[ 2.137026] hidraw: raw HID events driver (C) Jiri Kosina
517[ 2.145285] usbcore: registered new interface driver usbhid
518[ 2.145292] usbhid: USB HID core driver
519[ 2.147329] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1B1A:7001.0001/input/input2
520[ 2.147969] hid-generic 0003:1B1A:7001.0001: input,hidraw0: USB HID v1.10 Mouse [ USB Mouse ] on usb-0000:00:12.0-2/input0
521[ 2.149286] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:1B1A:7001.0002/input/input3
522[ 2.149527] hid-generic 0003:1B1A:7001.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Mouse ] on usb-0000:00:12.0-2/input1
523[ 2.302823] usb 2-2: new high-speed USB device number 3 using ehci-pci
524[ 2.452402] usb 2-2: New USB device found, idVendor=148f, idProduct=2870
525[ 2.452419] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
526[ 2.452429] usb 2-2: Product: 802.11 n WLAN
527[ 2.452437] usb 2-2: Manufacturer: Ralink
528[ 2.846824] usb 4-1: new low-speed USB device number 2 using ohci-pci
529[ 3.020266] usb 4-1: New USB device found, idVendor=046d, idProduct=c312
530[ 3.020278] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
531[ 3.020283] usb 4-1: Product: USB Multimedia Keyboard
532[ 3.020287] usb 4-1: Manufacturer: LITEON Technology
533[ 3.028830] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.0/0003:046D:C312.0003/input/input4
534[ 3.029049] hid-generic 0003:046D:C312.0003: input,hidraw2: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:13.0-1/input0
535[ 3.059131] Switched to clocksource tsc
536[ 6.175208] random: nonblocking pool is initialized
537[ 14.322443] NET: Registered protocol family 38
538[ 14.720375] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
539[ 15.687253] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
540[ 15.687388] systemd[1]: Found ordering cycle on basic.target/start
541[ 15.687396] systemd[1]: Found dependency on sysinit.target/start
542[ 15.687404] systemd[1]: Found dependency on rpcbind.service/start
543[ 15.687411] systemd[1]: Found dependency on network-online.target/start
544[ 15.687418] systemd[1]: Found dependency on network.target/start
545[ 15.687424] systemd[1]: Found dependency on systemd-networkd.service/start
546[ 15.687430] systemd[1]: Found dependency on dbus.service/start
547[ 15.687436] systemd[1]: Found dependency on basic.target/start
548[ 15.687443] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
549[ 15.687451] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
550[ 16.861049] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
551[ 17.112997] lp: driver loaded but no devices found
552[ 17.130683] ppdev: user-space parallel port driver
553[ 17.148342] fuse init (API version 7.23)
554[ 17.187650] w83627ehf: Found NCT6775F chip at 0x290
555[ 17.208433] systemd-udevd[240]: starting version 215
556[ 17.616922] ACPI: acpi_idle registered with cpuidle
557[ 17.635507] acpi-cpufreq: overriding BIOS provided _PSD data
558[ 17.651872] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
559[ 17.651887] ACPI: Power Button [PWRB]
560[ 17.652005] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
561[ 17.652010] ACPI: Power Button [PWRF]
562[ 17.658201] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
563[ 17.658362] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060
564[ 17.690265] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
565[ 17.690387] sp5100_tco: PCI Revision ID: 0x42
566[ 17.690545] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
567[ 17.690629] sp5100_tco: Last reboot was not triggered by watchdog.
568[ 17.691065] sp5100_tco: initialized (0xf7e26b00). heartbeat=60 sec (nowayout=0)
569[ 17.745587] [drm] Initialized drm 1.1.0 20060810
570[ 17.774878] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
571[ 17.797693] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X
572[ 17.861988] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
573[ 17.894710] sound hdaudioC1D0: ALC892: SKU not ready 0x00000100
574[ 17.895161] sound hdaudioC1D0: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
575[ 17.895166] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
576[ 17.895176] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
577[ 17.895180] sound hdaudioC1D0: mono: mono_out=0x0
578[ 17.895184] sound hdaudioC1D0: dig-out=0x1e/0x0
579[ 17.895187] sound hdaudioC1D0: inputs:
580[ 17.895193] sound hdaudioC1D0: Rear Mic=0x18
581[ 17.895197] sound hdaudioC1D0: Front Mic=0x19
582[ 17.895201] sound hdaudioC1D0: Line=0x1a
583[ 17.895205] sound hdaudioC1D0: CD=0x1c
584[ 17.912743] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input8
585[ 17.913175] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
586[ 17.913254] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
587[ 17.913335] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
588[ 17.913414] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
589[ 17.913492] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
590[ 17.913567] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
591[ 17.913643] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
592[ 17.913722] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
593[ 18.005438] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard
594[ 18.102724] systemd-udevd[282]: renamed network interface eth0 to eth10
595[ 18.177637] [drm] radeon kernel modesetting enabled.
596[ 18.274196] kvm: Nested Virtualization enabled
597[ 18.274208] kvm: Nested Paging enabled
598[ 18.284550] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
599[ 18.284582] [drm] register mmio base: 0xF0100000
600[ 18.284585] [drm] register mmio size: 262144
601[ 18.284767] ATOM BIOS: AMD
602[ 18.305484] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
603[ 18.305496] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
604[ 18.305502] [drm] Detected VRAM RAM=384M, BAR=256M
605[ 18.305505] [drm] RAM width 32bits DDR
606[ 18.314567] [TTM] Zone kernel: Available graphics memory: 414588 kiB
607[ 18.314576] [TTM] Zone highmem: Available graphics memory: 3948584 kiB
608[ 18.314579] [TTM] Initializing pool allocator
609[ 18.314590] [TTM] Initializing DMA pool allocator
610[ 18.314638] [drm] radeon: 384M of VRAM memory ready
611[ 18.314642] [drm] radeon: 1024M of GTT memory ready.
612[ 18.314672] [drm] Loading PALM Microcode
613[ 18.380810] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
614[ 18.398812] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
615[ 18.416147] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
616[ 18.416168] [drm] Internal thermal controller without fan control
617[ 18.416381] [drm] Found smc ucode version: 0x00010601
618[ 18.416466] [drm] radeon: dpm initialized
619[ 18.440589] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
620[ 18.440741] [drm] GART: num cpu pages 262144, num gpu pages 262144
621[ 18.474914] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
622[ 18.477032] radeon 0000:00:01.0: WB enabled
623[ 18.477043] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xff6f2c00
624[ 18.477049] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xff6f2c0c
625[ 18.479108] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf8732118
626[ 18.480404] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
627[ 18.480409] [drm] Driver supports precise vblank timestamp query.
628[ 18.480416] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
629[ 18.480451] radeon 0000:00:01.0: irq 44 for MSI/MSI-X
630[ 18.480476] radeon 0000:00:01.0: radeon: using MSI.
631[ 18.480517] [drm] radeon: irq initialized.
632[ 18.498134] [drm] ring test on 0 succeeded in 1 usecs
633[ 18.498146] [drm] ring test on 3 succeeded in 3 usecs
634[ 18.556176] [drm] ring test on 5 succeeded in 1 usecs
635[ 18.576063] [drm] UVD initialized successfully.
636[ 18.576672] [drm] ib test on ring 0 succeeded in 0 usecs
637[ 18.576714] [drm] ib test on ring 3 succeeded in 0 usecs
638[ 18.588449] cfg80211: Calling CRDA to update world regulatory domain
639[ 18.598012] [drm] ib test on ring 5 succeeded
640[ 18.621697] [drm] Radeon Display Connectors
641[ 18.621707] [drm] Connector 0:
642[ 18.621710] [drm] HDMI-A-1
643[ 18.621713] [drm] HPD1
644[ 18.621718] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
645[ 18.621720] [drm] Encoders:
646[ 18.621723] [drm] DFP1: INTERNAL_UNIPHY
647[ 18.621726] [drm] Connector 1:
648[ 18.621728] [drm] HDMI-A-2
649[ 18.621731] [drm] HPD2
650[ 18.621734] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
651[ 18.621736] [drm] Encoders:
652[ 18.621739] [drm] DFP2: INTERNAL_UNIPHY
653[ 18.621741] [drm] Connector 2:
654[ 18.621743] [drm] VGA-1
655[ 18.621747] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
656[ 18.621749] [drm] Encoders:
657[ 18.621752] [drm] CRT1: INTERNAL_KLDSCP_DAC1
658[ 18.661859] [drm] fb mappable at 0xE0477000
659[ 18.661863] [drm] vram apper at 0xE0000000
660[ 18.661865] [drm] size 5242880
661[ 18.661867] [drm] fb depth is 24
662[ 18.661870] [drm] pitch is 5120
663[ 18.662113] fbcon: radeondrmfb (fb0) is primary device
664[ 18.705512] Console: switching to colour frame buffer device 160x64
665[ 18.715470] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
666[ 18.715475] radeon 0000:00:01.0: registered panic notifier
667[ 18.726797] [drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0
668[ 18.806696] usb 2-2: reset high-speed USB device number 3 using ehci-pci
669[ 18.892902] cfg80211: World regulatory domain updated:
670[ 18.892921] cfg80211: DFS Master region: unset
671[ 18.892928] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
672[ 18.892939] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
673[ 18.892948] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
674[ 18.892956] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
675[ 18.892965] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
676[ 18.892974] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
677[ 18.892982] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
678[ 18.892990] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
679[ 18.892998] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
680[ 18.952512] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
681[ 19.006999] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
682[ 19.029367] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
683[ 19.063501] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
684[ 19.064148] usbcore: registered new interface driver rt2800usb
685[ 19.133712] systemd-journald[226]: Received request to flush runtime journal from PID 1
686[ 19.154831] systemd-udevd[276]: renamed network interface wlan0 to wlan1
687[ 19.831101] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
688[ 19.832332] rt2800usb 2-2:1.0: firmware: direct-loading firmware rt2870.bin
689[ 19.832357] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
690[ 20.046956] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
691[ 21.068931] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
692[ 21.206288] r8169 0000:03:00.0 eth10: link down
693[ 21.206441] IPv6: ADDRCONF(NETDEV_UP): eth10: link is not ready
694[ 40.334644] wlan1: authenticate with 34:31:c4:05:4c:e7
695[ 40.378778] wlan1: send auth to 34:31:c4:05:4c:e7 (try 1/3)
696[ 40.381329] wlan1: authenticated
697[ 40.382881] wlan1: associate with 34:31:c4:05:4c:e7 (try 1/3)
698[ 40.396182] wlan1: RX AssocResp from 34:31:c4:05:4c:e7 (capab=0x31 status=0 aid=2)
699[ 40.405631] wlan1: associated
700[ 40.405730] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
701[ 40.405876] cfg80211: Calling CRDA for country: DE
702[ 40.443790] cfg80211: Regulatory domain changed to country: DE
703[ 40.443809] cfg80211: DFS Master region: ETSI
704[ 40.443816] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
705[ 40.443827] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
706[ 40.443837] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
707[ 40.443847] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
708[ 40.443856] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
709[ 40.443864] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)