Raptor Engineering Automated Coreboot Test Stand | 71c587d | 2016-04-06 19:35:46 +0000 | [diff] [blame] | 1 | [ 0.000000] Initializing cgroup subsys cpuset |
| 2 | [ 0.000000] Initializing cgroup subsys cpu |
| 3 | [ 0.000000] Initializing cgroup subsys cpuacct |
| 4 | [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) |
| 5 | [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 |
| 6 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 7 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| 8 | [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| 9 | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| 10 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable |
| 11 | [ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved |
| 12 | [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved |
| 13 | [ 0.000000] NX (Execute Disable) protection: active |
| 14 | [ 0.000000] SMBIOS 2.7 present. |
| 15 | [ 0.000000] DMI: Emulation QEMU x86 q35/ich9/QEMU x86 q35/ich9, BIOS 4.3-640-g2fe2d3d-dirty 04/06/2016 |
| 16 | [ 0.000000] Hypervisor detected: KVM |
| 17 | [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 18 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 19 | [ 0.000000] AGP: No AGP bridge found |
| 20 | [ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000 |
| 21 | [ 0.000000] MTRR default type: uncachable |
| 22 | [ 0.000000] MTRR fixed ranges disabled: |
| 23 | [ 0.000000] 00000-FFFFF uncachable |
| 24 | [ 0.000000] MTRR variable ranges disabled: |
| 25 | [ 0.000000] 0 disabled |
| 26 | [ 0.000000] 1 disabled |
| 27 | [ 0.000000] 2 disabled |
| 28 | [ 0.000000] 3 disabled |
| 29 | [ 0.000000] 4 disabled |
| 30 | [ 0.000000] 5 disabled |
| 31 | [ 0.000000] 6 disabled |
| 32 | [ 0.000000] 7 disabled |
| 33 | [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| 34 | [ 0.000000] CPU MTRRs all blank - virtualized system. |
| 35 | [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| 36 | [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| 37 | [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| 38 | [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| 39 | [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| 40 | [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| 41 | [ 0.000000] init_memory_mapping: [mem 0x1ee00000-0x1effffff] |
| 42 | [ 0.000000] [mem 0x1ee00000-0x1effffff] page 2M |
| 43 | [ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1edfffff] |
| 44 | [ 0.000000] [mem 0x1c000000-0x1edfffff] page 2M |
| 45 | [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff] |
| 46 | [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| 47 | [ 0.000000] [mem 0x00200000-0x1bffffff] page 2M |
| 48 | [ 0.000000] init_memory_mapping: [mem 0x1f000000-0x1ff9ffff] |
| 49 | [ 0.000000] [mem 0x1f000000-0x1fdfffff] page 2M |
| 50 | [ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k |
| 51 | [ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE |
| 52 | [ 0.000000] RAMDISK: [mem 0x1f0c7000-0x1fe79fff] |
| 53 | [ 0.000000] ACPI: Early table checksum verification disabled |
| 54 | [ 0.000000] ACPI: RSDP 0x00000000000F0930 000024 (v02 CORE ) |
| 55 | [ 0.000000] ACPI: XSDT 0x000000001FFB90E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 56 | [ 0.000000] ACPI: FACP 0x000000001FFBADC0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000) |
| 57 | [ 0.000000] ACPI: DSDT 0x000000001FFB9280 001B38 (v01 CORE COREBOOT 00000002 INTL 20150619) |
| 58 | [ 0.000000] ACPI: FACS 0x000000001FFB9240 000040 |
| 59 | [ 0.000000] ACPI: MCFG 0x000000001FFBAEC0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 60 | [ 0.000000] ACPI: TCPA 0x000000001FFBAF00 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| 61 | [ 0.000000] ACPI: APIC 0x000000001FFBAF40 000054 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 62 | [ 0.000000] ACPI: HPET 0x000000001FFBAFA0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 63 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 64 | [ 0.000000] No NUMA configuration found |
| 65 | [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff] |
| 66 | [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff] |
| 67 | [ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff] |
| 68 | [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 |
| 69 | [ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock |
| 70 | [ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e000000-ffff88001e7fffff] on node 0 |
| 71 | [ 0.000000] Zone ranges: |
| 72 | [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| 73 | [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| 74 | [ 0.000000] Normal empty |
| 75 | [ 0.000000] Movable zone start for each node |
| 76 | [ 0.000000] Early memory node ranges |
| 77 | [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| 78 | [ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff] |
| 79 | [ 0.000000] On node 0 totalpages: 130878 |
| 80 | [ 0.000000] DMA zone: 56 pages used for memmap |
| 81 | [ 0.000000] DMA zone: 21 pages reserved |
| 82 | [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| 83 | [ 0.000000] DMA32 zone: 1735 pages used for memmap |
| 84 | [ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31 |
| 85 | [ 0.000000] ACPI: PM-Timer IO Port: 0x608 |
| 86 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 87 | [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| 88 | [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| 89 | [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 |
| 90 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 91 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| 92 | [ 0.000000] ACPI: IRQ0 used by override. |
| 93 | [ 0.000000] ACPI: IRQ2 used by override. |
| 94 | [ 0.000000] ACPI: IRQ9 used by override. |
| 95 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 96 | [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 |
| 97 | [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs |
| 98 | [ 0.000000] nr_irqs_gsi: 40 |
| 99 | [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| 100 | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| 101 | [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| 102 | [ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices |
| 103 | [ 0.000000] Booting paravirtualized kernel on KVM |
| 104 | [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1 |
| 105 | [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001ee00000 s80896 r8192 d21504 u2097152 |
| 106 | [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152 |
| 107 | [ 0.000000] pcpu-alloc: [0] 0 |
| 108 | [ 0.000000] KVM setup async PF for cpu 0 |
| 109 | [ 0.000000] kvm-stealtime: cpu 0, msr 1ee0d080 |
| 110 | [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066 |
| 111 | [ 0.000000] Policy zone: DMA32 |
| 112 | [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 |
| 113 | [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) |
| 114 | [ 0.000000] AGP: Checking aperture... |
| 115 | [ 0.000000] AGP: No AGP bridge found |
| 116 | [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| 117 | [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| 118 | [ 0.000000] Memory: 489580K/523512K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 33932K reserved) |
| 119 | [ 0.000000] Hierarchical RCU implementation. |
| 120 | [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| 121 | [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1. |
| 122 | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 |
| 123 | [ 0.000000] NR_IRQS:33024 nr_irqs:256 16 |
| 124 | [ 0.000000] Console: colour VGA+ 80x25 |
| 125 | [ 0.000000] console [ttyS0] enabled |
| 126 | [ 0.000000] hpet clockevent registered |
| 127 | [ 0.000000] tsc: Detected 2311.846 MHz processor |
| 128 | [ 0.008000] Calibrating delay loop (skipped) preset value.. 4623.69 BogoMIPS (lpj=9247384) |
| 129 | [ 0.008000] pid_max: default: 32768 minimum: 301 |
| 130 | [ 0.008000] ACPI: Core revision 20140424 |
Raptor Engineering Automated Coreboot Test Stand | ae03ef7 | 2016-04-07 09:38:57 +0000 | [diff] [blame] | 131 | [ 0.008841] ACPI: All ACPI Tables successfully acquired |
| 132 | [ 0.009745] Security Framework initialized |
| 133 | [ 0.010412] AppArmor: AppArmor disabled by boot time parameter |
| 134 | [ 0.011345] Yama: disabled by default; enable with sysctl kernel.yama.* |
| 135 | [ 0.012055] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) |
| 136 | [ 0.013365] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) |
Raptor Engineering Automated Coreboot Test Stand | ac45cd9 | 2016-04-07 07:20:18 +0000 | [diff] [blame] | 137 | [ 0.014607] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) |
Raptor Engineering Automated Coreboot Test Stand | ae03ef7 | 2016-04-07 09:38:57 +0000 | [diff] [blame] | 138 | [ 0.016008] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) |
| 139 | [ 0.017310] Initializing cgroup subsys memory |
| 140 | [ 0.017970] Initializing cgroup subsys devices |
| 141 | [ 0.018640] Initializing cgroup subsys freezer |
| 142 | [ 0.019310] Initializing cgroup subsys net_cls |
| 143 | [ 0.020011] Initializing cgroup subsys blkio |
| 144 | [ 0.020650] Initializing cgroup subsys perf_event |
| 145 | [ 0.021344] Initializing cgroup subsys net_prio |
| 146 | [ 0.022102] mce: CPU supports 10 MCE banks |
| 147 | [ 0.022786] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 |
Raptor Engineering Automated Coreboot Test Stand | 71c587d | 2016-04-06 19:35:46 +0000 | [diff] [blame] | 148 | Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 |
| 149 | tlb_flushall_shift: -1 |
Raptor Engineering Automated Coreboot Test Stand | ae03ef7 | 2016-04-07 09:38:57 +0000 | [diff] [blame] | 150 | [ 0.039891] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000) |
| 151 | [ 0.045387] ftrace: allocating 21614 entries in 85 pages |
| 152 | [ 0.057217] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| 153 | [ 0.058103] smpboot: CPU0: AMD Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b) |
Raptor Engineering Automated Coreboot Test Stand | ac45cd9 | 2016-04-07 07:20:18 +0000 | [diff] [blame] | 154 | [ 0.060000] Performance Events: Broken PMU hardware detected, using software events only. |
| 155 | [ 0.060000] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff) |
Raptor Engineering Automated Coreboot Test Stand | ae03ef7 | 2016-04-07 09:38:57 +0000 | [diff] [blame] | 156 | [ 0.060032] x86: Booted up 1 node, 1 CPUs |
| 157 | [ 0.060646] smpboot: Total of 1 processors activated (4623.69 BogoMIPS) |
| 158 | [ 0.061943] NMI watchdog: disabled (cpu0): hardware events not enabled |
| 159 | [ 0.063050] devtmpfs: initialized |
| 160 | [ 0.069725] pinctrl core: initialized pinctrl subsystem |
| 161 | [ 0.070588] NET: Registered protocol family 16 |
| 162 | [ 0.071400] cpuidle: using governor ladder |
| 163 | [ 0.072014] cpuidle: using governor menu |
| 164 | [ 0.072711] ACPI: bus type PCI registered |
| 165 | [ 0.073310] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 166 | [ 0.074375] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) |
| 167 | [ 0.075718] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 |
| 168 | [ 0.076549] PCI: Using configuration type 1 for base access |
| 169 | [ 0.078361] ACPI: Added _OSI(Module Device) |
| 170 | [ 0.078983] ACPI: Added _OSI(Processor Device) |
| 171 | [ 0.080003] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 172 | [ 0.080683] ACPI: Added _OSI(Processor Aggregator Device) |
| 173 | [ 0.085558] ACPI: Interpreter enabled |
| 174 | [ 0.086115] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) |
| 175 | [ 0.087476] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| 176 | [ 0.088791] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| 177 | [ 0.090145] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| 178 | [ 0.091581] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580) |
| 179 | [ 0.092838] ACPI: (supports S0) |
| 180 | [ 0.093328] ACPI: Using IOAPIC for interrupt routing |
| 181 | [ 0.094127] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 182 | [ 0.097891] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| 183 | [ 0.098890] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| 184 | [ 0.100252] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| 185 | [ 0.101586] PCI host bridge to bus 0000:00 |
| 186 | [ 0.102228] pci_bus 0000:00: root bus resource [bus 00-ff] |
| 187 | [ 0.103088] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
Raptor Engineering Automated Coreboot Test Stand | ac45cd9 | 2016-04-07 07:20:18 +0000 | [diff] [blame] | 188 | [ 0.104003] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] |
Raptor Engineering Automated Coreboot Test Stand | ae03ef7 | 2016-04-07 09:38:57 +0000 | [diff] [blame] | 189 | [ 0.104962] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| 190 | [ 0.106027] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff] |
| 191 | [ 0.107103] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 |
| 192 | [ 0.107424] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000 |
| 193 | [ 0.109216] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] |
| 194 | [ 0.112006] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff] |
| 195 | [ 0.124007] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref] |
| 196 | [ 0.124175] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000 |
| 197 | [ 0.126498] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff] |
| 198 | [ 0.129108] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f] |
| 199 | [ 0.141148] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref] |
| 200 | [ 0.141481] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 |
| 201 | [ 0.141819] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO |
| 202 | [ 0.143031] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO |
| 203 | [ 0.144185] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 |
| 204 | [ 0.155353] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f] |
| 205 | [ 0.157119] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff] |
| 206 | [ 0.160343] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 |
| 207 | [ 0.160520] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f] |
| 208 | [ 0.161065] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0 |
| 209 | [ 0.162144] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0 |
| 210 | [ 0.163216] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0 |
| 211 | [ 0.164285] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0 |
| 212 | [ 0.165318] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0 |
| 213 | [ 0.166360] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0 |
| 214 | [ 0.167403] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0 |
| 215 | [ 0.168379] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0 |
| 216 | [ 0.169348] ACPI: PCI Interrupt Link [GSIA] (IRQs *16) |
| 217 | [ 0.170149] ACPI: PCI Interrupt Link [GSIB] (IRQs *17) |
| 218 | [ 0.170955] ACPI: PCI Interrupt Link [GSIC] (IRQs *18) |
| 219 | [ 0.171752] ACPI: PCI Interrupt Link [GSID] (IRQs *19) |
| 220 | [ 0.172147] ACPI: PCI Interrupt Link [GSIE] (IRQs *20) |
| 221 | [ 0.172947] ACPI: PCI Interrupt Link [GSIF] (IRQs *21) |
| 222 | [ 0.173748] ACPI: PCI Interrupt Link [GSIG] (IRQs *22) |
| 223 | [ 0.174591] ACPI: PCI Interrupt Link [GSIH] (IRQs *23) |
| 224 | [ 0.176175] ACPI: Enabled 16 GPEs in block 00 to 3F |
| 225 | [ 0.177128] vgaarb: setting as boot device: PCI:0000:00:01.0 |
| 226 | [ 0.178002] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none |
| 227 | [ 0.179246] vgaarb: loaded |
| 228 | [ 0.179671] vgaarb: bridge control possible 0000:00:01.0 |
| 229 | [ 0.180073] PCI: Using ACPI for IRQ routing |
| 230 | [ 0.232939] PCI: pci_cache_line_size set to 64 bytes |
| 231 | [ 0.233026] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| 232 | [ 0.233030] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff] |
| 233 | [ 0.233224] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| 234 | [ 0.234344] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| 235 | [ 0.235175] hpet0: 3 comparators, 64-bit 100.000000 MHz counter |
| 236 | [ 0.238204] Switched to clocksource kvm-clock |
| 237 | [ 0.244960] pnp: PnP ACPI init |
| 238 | [ 0.245531] ACPI: bus type PNP registered |
| 239 | [ 0.246263] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) |
| 240 | [ 0.246336] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) |
| 241 | [ 0.246392] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) |
| 242 | [ 0.246513] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active) |
| 243 | [ 0.246590] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) |
| 244 | [ 0.246921] pnp: PnP ACPI: found 5 devices |
| 245 | [ 0.247556] ACPI: bus type PNP unregistered |
| 246 | [ 0.255451] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f] |
| 247 | [ 0.256528] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| 248 | [ 0.256531] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| 249 | [ 0.256533] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| 250 | [ 0.256535] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff] |
| 251 | [ 0.256575] NET: Registered protocol family 2 |
| 252 | [ 0.257434] TCP established hash table entries: 4096 (order: 3, 32768 bytes) |
| 253 | [ 0.258472] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) |
| 254 | [ 0.259420] TCP: Hash tables configured (established 4096 bind 4096) |
| 255 | [ 0.260384] TCP: reno registered |
| 256 | [ 0.260871] UDP hash table entries: 256 (order: 1, 8192 bytes) |
| 257 | [ 0.261714] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) |
| 258 | [ 0.262663] NET: Registered protocol family 1 |
| 259 | [ 0.263344] pci 0000:00:01.0: Video device with shadowed ROM |
| 260 | [ 0.263387] PCI: CLS 64 bytes, default 64 |
| 261 | [ 0.263444] Unpacking initramfs... |
| 262 | [ 0.588391] Freeing initrd memory: 14028K (ffff88001f0c7000 - ffff88001fe7a000) |
| 263 | [ 0.589782] microcode: AMD CPU family 0x6 not supported |
| 264 | [ 0.590854] futex hash table entries: 256 (order: 2, 16384 bytes) |
| 265 | [ 0.591769] audit: initializing netlink subsys (disabled) |
| 266 | [ 0.592627] audit: type=2000 audit(1460021766.237:1): initialized |
| 267 | [ 0.593852] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 268 | [ 0.594815] zbud: loaded |
| 269 | [ 0.595332] VFS: Disk quotas dquot_6.5.2 |
| 270 | [ 0.595924] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 271 | [ 0.596983] msgmni has been set to 983 |
| 272 | [ 0.597851] alg: No test for stdrng (krng) |
| 273 | [ 0.598482] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| 274 | [ 0.599598] io scheduler noop registered |
| 275 | [ 0.600197] io scheduler deadline registered |
| 276 | [ 0.600863] io scheduler cfq registered (default) |
| 277 | [ 0.601624] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 278 | [ 0.602466] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 279 | [ 0.603482] GHES: HEST is not enabled! |
| 280 | [ 0.604136] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 281 | [ 0.628122] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| 282 | [ 0.629572] Linux agpgart interface v0.103 |
| 283 | [ 0.630315] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 |
| 284 | [ 0.632227] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 285 | [ 0.632971] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 286 | [ 0.633858] mousedev: PS/2 mouse device common for all mice |
| 287 | [ 0.634976] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| 288 | [ 0.636447] rtc_cmos 00:00: RTC can wake from S4 |
| 289 | [ 0.637404] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 |
| 290 | [ 0.638528] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs |
| 291 | [ 0.639686] ledtrig-cpu: registered to indicate activity on CPUs |
| 292 | [ 0.640770] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| 293 | [ 0.641738] AMD IOMMUv2 functionality not available on this system |
| 294 | [ 0.642747] TCP: cubic registered |
| 295 | [ 0.643266] NET: Registered protocol family 10 |
| 296 | [ 0.644145] mip6: Mobile IPv6 |
| 297 | [ 0.644622] NET: Registered protocol family 17 |
| 298 | [ 0.645297] mpls_gso: MPLS GSO support |
| 299 | [ 0.646103] registered taskstats version 1 |
| 300 | [ 0.647006] rtc_cmos 00:00: setting system clock to 2016-04-07 09:36:06 UTC (1460021766) |
| 301 | [ 0.648280] PM: Hibernation image not present or could not be loaded. |
| 302 | [ 0.649946] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000) |
| 303 | [ 0.651147] Write protecting the kernel read-only data: 8192k |
| 304 | [ 0.654793] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000) |
| 305 | [ 0.656651] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| 306 | [ 0.672177] systemd-udevd[52]: starting version 215 |
| 307 | [ 0.673382] random: systemd-udevd urandom read with 2 bits of entropy available |
| 308 | [ 0.686023] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI |
| 309 | [ 0.687130] e1000: Copyright (c) 1999-2006 Intel Corporation. |
| 310 | [ 0.690324] SCSI subsystem initialized |
| 311 | [ 0.697758] Floppy drive(s): fd0 is 1.44M |
| 312 | [ 0.699124] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22 |
| 313 | [ 0.708557] libata version 3.00 loaded. |
| 314 | [ 0.712469] FDC 0 is a S82078B |
| 315 | [ 1.039531] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff |
| 316 | [ 1.040723] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection |
| 317 | [ 1.041804] ahci 0000:00:1f.2: version 3.0 |
| 318 | [ 1.042141] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16 |
| 319 | [ 1.043179] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X |
| 320 | [ 1.043570] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode |
| 321 | [ 1.044897] ahci 0000:00:1f.2: flags: ncq only |
| 322 | [ 1.048084] scsi0 : ahci |
| 323 | [ 1.048677] scsi1 : ahci |
| 324 | [ 1.049204] scsi2 : ahci |
| 325 | [ 1.049719] scsi3 : ahci |
| 326 | [ 1.050232] scsi4 : ahci |
| 327 | [ 1.050738] scsi5 : ahci |
| 328 | [ 1.051192] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40 |
| 329 | [ 1.052327] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40 |
| 330 | [ 1.053477] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40 |
| 331 | [ 1.054571] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40 |
| 332 | [ 1.055667] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40 |
| 333 | [ 1.056821] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40 |
| 334 | [ 1.376204] ata1: SATA link down (SStatus 0 SControl 300) |
| 335 | [ 1.377382] ata4: SATA link down (SStatus 0 SControl 300) |
| 336 | [ 1.378468] ata5: SATA link down (SStatus 0 SControl 300) |
| 337 | [ 1.379551] ata3: SATA link down (SStatus 0 SControl 300) |
| 338 | [ 1.380678] ata6: SATA link down (SStatus 0 SControl 300) |
| 339 | [ 1.381766] ata2: SATA link down (SStatus 0 SControl 300) |
| 340 | [ 1.405561] FS-Cache: Loaded |
| 341 | [ 1.411285] RPC: Registered named UNIX socket transport module. |
| 342 | [ 1.412475] RPC: Registered udp transport module. |
| 343 | [ 1.413302] RPC: Registered tcp transport module. |
| 344 | [ 1.414118] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| 345 | [ 1.422149] FS-Cache: Netfs 'nfs' registered for caching |
| 346 | [ 1.434069] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 347 | [ 1.588234] tsc: Refined TSC clocksource calibration: 2312.026 MHz |
| 348 | [ 3.436832] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX |
| 349 | [ 3.439092] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| 350 | [ 3.580773] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| 351 | [ 3.582841] systemd[1]: Detected virtualization 'kvm'. |
| 352 | [ 3.583649] systemd[1]: Detected architecture 'x86-64'. |
| 353 | [ 3.612136] systemd[1]: Inserted module 'autofs4' |
| 354 | [ 3.614238] systemd[1]: Set hostname to <cb-test-tgt>. |
| 355 | [ 3.829374] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| 356 | [ 3.832869] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| 357 | [ 3.835663] systemd[1]: Expecting device dev-ttyS0.device... |
| 358 | [ 3.839176] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| 359 | [ 3.841286] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| 360 | [ 3.843224] systemd[1]: Starting Remote File Systems (Pre). |
| 361 | [ 3.846146] systemd[1]: Reached target Remote File Systems (Pre). |
| 362 | [ 3.847056] systemd[1]: Starting Encrypted Volumes. |
| 363 | [ 3.849133] systemd[1]: Reached target Encrypted Volumes. |
| 364 | [ 3.849969] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| 365 | [ 3.853035] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| 366 | [ 3.854419] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| 367 | [ 3.855616] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| 368 | [ 3.856853] systemd[1]: Starting Paths. |
| 369 | [ 3.858682] systemd[1]: Reached target Paths. |
| 370 | [ 3.859379] systemd[1]: Starting Swap. |
| 371 | [ 3.861211] systemd[1]: Reached target Swap. |
| 372 | [ 3.861897] systemd[1]: Starting Root Slice. |
| 373 | [ 3.863858] systemd[1]: Created slice Root Slice. |
| 374 | [ 3.864637] systemd[1]: Starting Delayed Shutdown Socket. |
| 375 | [ 3.866871] systemd[1]: Listening on Delayed Shutdown Socket. |
| 376 | [ 3.867765] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| 377 | [ 3.870850] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| 378 | [ 3.871888] systemd[1]: Starting Journal Socket (/dev/log). |
| 379 | [ 3.874475] systemd[1]: Listening on Journal Socket (/dev/log). |
| 380 | [ 3.875366] systemd[1]: Starting udev Kernel Socket. |
| 381 | [ 3.877474] systemd[1]: Listening on udev Kernel Socket. |
| 382 | [ 3.878277] systemd[1]: Starting udev Control Socket. |
| 383 | [ 3.880393] systemd[1]: Listening on udev Control Socket. |
| 384 | [ 3.881245] systemd[1]: Starting User and Session Slice. |
| 385 | [ 3.883434] systemd[1]: Created slice User and Session Slice. |
| 386 | [ 3.884320] systemd[1]: Starting Journal Socket. |
| 387 | [ 3.886372] systemd[1]: Listening on Journal Socket. |
| 388 | [ 3.887174] systemd[1]: Starting System Slice. |
| 389 | [ 3.889447] systemd[1]: Created slice System Slice. |
| 390 | [ 3.890197] systemd[1]: Starting Increase datagram queue length... |
| 391 | [ 3.892947] systemd[1]: Starting udev Coldplug all Devices... |
| 392 | [ 3.899195] systemd[1]: Starting Load Kernel Modules... |
| 393 | [ 3.910247] systemd[1]: Started Set Up Additional Binary Formats. |
| 394 | [ 3.911300] systemd[1]: Mounting Debug File System... |
| 395 | [ 3.945536] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| 396 | [ 3.971891] systemd[1]: Mounting POSIX Message Queue File System... |
| 397 | [ 3.978101] systemd[1]: Mounting Huge Pages File System... |
| 398 | [ 3.988876] systemd[1]: Starting system-getty.slice. |
| 399 | [ 3.999560] systemd[1]: Created slice system-getty.slice. |
| 400 | [ 4.001959] systemd[1]: Starting system-serial\x2dgetty.slice. |
| 401 | [ 4.006184] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| 402 | [ 4.007147] systemd[1]: Starting Slices. |
| 403 | [ 4.009017] systemd[1]: Reached target Slices. |
| 404 | [ 4.009708] systemd[1]: Starting Remount Root and Kernel File Systems... |
| 405 | [ 4.014350] systemd[1]: Mounted Huge Pages File System. |
| 406 | [ 4.017842] systemd[1]: Mounted POSIX Message Queue File System. |
| 407 | [ 4.022733] systemd[1]: Mounted Debug File System. |
| 408 | [ 4.027094] systemd[1]: Started Increase datagram queue length. |
| 409 | [ 4.030359] systemd[1]: Started Load Kernel Modules. |
| 410 | [ 4.036178] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| 411 | [ 4.040537] systemd[1]: Started Remount Root and Kernel File Systems. |
| 412 | [ 4.053384] systemd[1]: Started udev Coldplug all Devices. |
| 413 | [ 4.085784] systemd[1]: Started Various fixups to make systemd work better on Debian. |
| 414 | [ 4.087004] systemd[1]: Starting Load/Save Random Seed... |
| 415 | [ 4.089753] systemd[1]: Starting Create Static Device Nodes in /dev... |
| 416 | [ 4.092536] systemd[1]: Starting Apply Kernel Variables... |
| 417 | [ 4.100766] systemd[1]: Mounted Configuration File System. |
| 418 | [ 4.101668] systemd[1]: Mounted FUSE Control File System. |
| 419 | [ 4.102485] systemd[1]: Starting Syslog Socket. |
| 420 | [ 4.115542] systemd[1]: Listening on Syslog Socket. |
| 421 | [ 4.118998] systemd[1]: Starting Sockets. |
| 422 | [ 4.125940] systemd[1]: Reached target Sockets. |
| 423 | [ 4.126647] systemd[1]: Starting Journal Service... |
| 424 | [ 4.143037] systemd[1]: Started Journal Service. |
| 425 | [ 4.218957] systemd-udevd[147]: starting version 215 |
| 426 | [ 4.413668] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 |
| 427 | [ 4.415298] ACPI: Power Button [PWRF] |
| 428 | [ 4.484852] input: PC Speaker as /devices/platform/pcspkr/input/input3 |
| 429 | [ 4.491957] parport_pc 00:03: reported by Plug and Play ACPI |
| 430 | [ 4.493292] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] |
| 431 | [ 4.519877] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101) |
| 432 | [ 4.522755] i801_smbus 0000:00:1f.3: Enabling SMBus device |
| 433 | [ 4.523825] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt |
| 434 | [ 4.535926] [drm] Initialized drm 1.1.0 20060810 |
| 435 | [ 4.611431] ppdev: user-space parallel port driver |
| 436 | [ 4.620308] iTCO_vendor_support: vendor-support=0 |
| 437 | [ 4.624217] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| 438 | [ 4.625208] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660) |
| 439 | [ 4.626304] iTCO_wdt: timeout value out of range, using 30 |
| 440 | [ 4.635147] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| 441 | [ 4.822380] Key type dns_resolver registered |
| 442 | [ 4.839722] NFS: Registering the id_resolver key type |
| 443 | [ 4.841541] Key type id_resolver registered |
| 444 | [ 4.842208] Key type id_legacy registered |
| 445 | [ 5.016302] systemd-journald[145]: Received request to flush runtime journal from PID 1 |
| 446 | [ 5.045890] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| 447 | [ 5.110109] random: nonblocking pool is initialized |
| 448 | [ 5.385902] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 |
| 449 | [ 35.209742] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |