Gitiles
Code Review Sign In
review.coreboot.org / board-status / ec7365a0e0e6c6ecc19c27bb4db55f3c6d2f5348 / . / emulation / qemu-q35 / 4.1-737-gb1535e6 / 2015-10-13T22:40:12Z / kernel_log.txt
blob: 0ab02102dc981defa2d2c6ff1eae540aca8bfb1c [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand8f592da2015-10-13 23:57:05 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9991-g4d6db95-dirty 06/13/2015
16[ 0.000000] Hypervisor detected: KVM
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges disabled:
23[ 0.000000] 00000-FFFFF uncachable
24[ 0.000000] MTRR variable ranges disabled:
25[ 0.000000] 0 disabled
26[ 0.000000] 1 disabled
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
34[ 0.000000] CPU MTRRs all blank - virtualized system.
35[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
36[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
37[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
38[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
39[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
40[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
41[ 0.000000] init_memory_mapping: [mem 0x1f200000-0x1f3fffff]
42[ 0.000000] [mem 0x1f200000-0x1f3fffff] page 2M
43[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1f1fffff]
44[ 0.000000] [mem 0x1c000000-0x1f1fffff] page 2M
45[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
46[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
47[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
48[ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1ff9ffff]
49[ 0.000000] [mem 0x1f400000-0x1fdfffff] page 2M
50[ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k
51[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
52[ 0.000000] RAMDISK: [mem 0x1f5f2000-0x1fe7bfff]
53[ 0.000000] ACPI: Early table checksum verification disabled
54[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
55[ 0.000000] ACPI: XSDT 0x000000001FFB90E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: FACP 0x000000001FFBAD90 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: DSDT 0x000000001FFB9250 001B37 (v01 CORE COREBOOT 00000002 INTL 20150204)
58[ 0.000000] ACPI: FACS 0x000000001FFB9210 000040
59[ 0.000000] ACPI: MCFG 0x000000001FFBAE90 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: TCPA 0x000000001FFBAED0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: APIC 0x000000001FFBAF10 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: HPET 0x000000001FFBAF70 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: Local APIC address 0xfee00000
64[ 0.000000] No NUMA configuration found
65[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff]
66[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff]
67[ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff]
68[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
69[ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock
70[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e400000-ffff88001ebfffff] on node 0
71[ 0.000000] Zone ranges:
72[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
73[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
74[ 0.000000] Normal empty
75[ 0.000000] Movable zone start for each node
76[ 0.000000] Early memory node ranges
77[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
78[ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff]
79[ 0.000000] On node 0 totalpages: 130878
80[ 0.000000] DMA zone: 56 pages used for memmap
81[ 0.000000] DMA zone: 21 pages reserved
82[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
83[ 0.000000] DMA32 zone: 1735 pages used for memmap
84[ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31
85[ 0.000000] ACPI: PM-Timer IO Port: 0x608
86[ 0.000000] ACPI: Local APIC address 0xfee00000
87[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
88[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
89[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
90[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
91[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
92[ 0.000000] ACPI: IRQ0 used by override.
93[ 0.000000] ACPI: IRQ2 used by override.
94[ 0.000000] ACPI: IRQ9 used by override.
95[ 0.000000] Using ACPI (MADT) for SMP configuration information
96[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
97[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
98[ 0.000000] nr_irqs_gsi: 40
99[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
100[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
101[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
102[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
103[ 0.000000] Booting paravirtualized kernel on KVM
104[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
105[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f200000 s80896 r8192 d21504 u2097152
106[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
107[ 0.000000] pcpu-alloc: [0] 0
108[ 0.000000] KVM setup async PF for cpu 0
109[ 0.000000] kvm-stealtime: cpu 0, msr 1f20d080
110[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066
111[ 0.000000] Policy zone: DMA32
112[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
113[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
114[ 0.000000] AGP: Checking aperture...
115[ 0.000000] AGP: No AGP bridge found
116[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
117[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
118[ 0.000000] Memory: 494868K/523512K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 28644K reserved)
119[ 0.000000] Hierarchical RCU implementation.
120[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
121[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
122[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
123[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
124[ 0.000000] Console: colour VGA+ 80x25
125[ 0.000000] console [ttyS0] enabled
126[ 0.000000] hpet clockevent registered
127[ 0.000000] tsc: Detected 2311.846 MHz processor
128[ 0.008000] Calibrating delay loop (skipped) preset value.. 4623.69 BogoMIPS (lpj=9247384)
129[ 0.008000] pid_max: default: 32768 minimum: 301
130[ 0.008000] ACPI: Core revision 20140424
131[ 0.008950] ACPI: All ACPI Tables successfully acquired
132[ 0.009796] Security Framework initialized
133[ 0.010415] AppArmor: AppArmor disabled by boot time parameter
134[ 0.011262] Yama: disabled by default; enable with sysctl kernel.yama.*
135[ 0.012080] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
136[ 0.013355] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
137[ 0.014475] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
138[ 0.015458] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
139[ 0.016286] Initializing cgroup subsys memory
140[ 0.016937] Initializing cgroup subsys devices
141[ 0.017605] Initializing cgroup subsys freezer
142[ 0.018267] Initializing cgroup subsys net_cls
143[ 0.018924] Initializing cgroup subsys blkio
144[ 0.020009] Initializing cgroup subsys perf_event
145[ 0.020717] Initializing cgroup subsys net_prio
146[ 0.021508] mce: CPU supports 10 MCE banks
147[ 0.022202] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
148Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
149tlb_flushall_shift: -1
150[ 0.033934] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
151[ 0.039506] ftrace: allocating 21601 entries in 85 pages
152[ 0.052859] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
153[ 0.053754] smpboot: CPU0: AMD QEMU Virtual CPU version 2.1.2 (fam: 06, model: 02, stepping: 03)
154[ 0.056000] Performance Events: Broken PMU hardware detected, using software events only.
155[ 0.056000] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
156[ 0.056622] x86: Booted up 1 node, 1 CPUs
157[ 0.057314] smpboot: Total of 1 processors activated (4623.69 BogoMIPS)
158[ 0.058895] NMI watchdog: disabled (cpu0): hardware events not enabled
159[ 0.060056] devtmpfs: initialized
160[ 0.066786] pinctrl core: initialized pinctrl subsystem
161[ 0.067648] NET: Registered protocol family 16
162[ 0.068166] cpuidle: using governor ladder
163[ 0.068810] cpuidle: using governor menu
164[ 0.069518] ACPI: bus type PCI registered
165[ 0.070128] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
166[ 0.071229] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
167[ 0.072004] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
168[ 0.073461] PCI: Using configuration type 1 for base access
169[ 0.076252] ACPI: Added _OSI(Module Device)
170[ 0.076897] ACPI: Added _OSI(Processor Device)
171[ 0.077549] ACPI: Added _OSI(3.0 _SCP Extensions)
172[ 0.078233] ACPI: Added _OSI(Processor Aggregator Device)
173[ 0.083386] ACPI: Interpreter enabled
174[ 0.083944] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
175[ 0.084812] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
176[ 0.086187] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
177[ 0.088003] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
178[ 0.089397] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
179[ 0.090776] ACPI: (supports S0)
180[ 0.091247] ACPI: Using IOAPIC for interrupt routing
181[ 0.092036] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
182[ 0.096288] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
183[ 0.097278] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
184[ 0.098824] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
185[ 0.100111] PCI host bridge to bus 0000:00
186[ 0.100764] pci_bus 0000:00: root bus resource [bus 00-ff]
187[ 0.101611] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
188[ 0.102570] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
189[ 0.103525] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
190[ 0.104003] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
191[ 0.105106] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
192[ 0.105535] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
193[ 0.109656] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
194[ 0.112007] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
195[ 0.125307] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
196[ 0.125521] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
197[ 0.130534] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
198[ 0.134044] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
199[ 0.150575] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
200[ 0.151031] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
201[ 0.152050] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
202[ 0.153263] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
203[ 0.154565] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
204[ 0.166443] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
205[ 0.169274] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
206[ 0.172218] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
207[ 0.172442] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
208[ 0.173097] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
209[ 0.174191] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
210[ 0.175288] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
211[ 0.176395] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
212[ 0.177525] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
213[ 0.178618] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
214[ 0.179710] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
215[ 0.180420] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
216[ 0.181420] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
217[ 0.182249] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
218[ 0.183069] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
219[ 0.184153] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
220[ 0.184978] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
221[ 0.185800] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
222[ 0.186622] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
223[ 0.187438] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
224[ 0.188452] ACPI: Enabled 16 GPEs in block 00 to 3F
225[ 0.189437] vgaarb: setting as boot device: PCI:0000:00:01.0
226[ 0.190323] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
227[ 0.191564] vgaarb: loaded
228[ 0.192003] vgaarb: bridge control possible 0000:00:01.0
229[ 0.192905] PCI: Using ACPI for IRQ routing
230[ 0.246495] PCI: pci_cache_line_size set to 64 bytes
231[ 0.246608] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
232[ 0.246611] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff]
233[ 0.246818] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
234[ 0.247934] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
235[ 0.248224] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
236[ 0.252075] Switched to clocksource kvm-clock
237[ 0.261002] pnp: PnP ACPI init
238[ 0.261574] ACPI: bus type PNP registered
239[ 0.262308] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
240[ 0.262382] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
241[ 0.262443] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
242[ 0.262573] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
243[ 0.262661] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
244[ 0.263061] pnp: PnP ACPI: found 5 devices
245[ 0.263701] ACPI: bus type PNP unregistered
246[ 0.271665] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
247[ 0.272696] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
248[ 0.272699] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
249[ 0.272701] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
250[ 0.272703] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
251[ 0.272739] NET: Registered protocol family 2
252[ 0.273618] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
253[ 0.274680] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
254[ 0.275669] TCP: Hash tables configured (established 4096 bind 4096)
255[ 0.276693] TCP: reno registered
256[ 0.277196] UDP hash table entries: 256 (order: 1, 8192 bytes)
257[ 0.278069] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
258[ 0.279052] NET: Registered protocol family 1
259[ 0.279760] pci 0000:00:01.0: Video device with shadowed ROM
260[ 0.279824] PCI: CLS 64 bytes, default 64
261[ 0.279882] Unpacking initramfs...
262[ 0.481821] Freeing initrd memory: 8744K (ffff88001f5f2000 - ffff88001fe7c000)
263[ 0.483162] microcode: AMD CPU family 0x6 not supported
264[ 0.484334] futex hash table entries: 256 (order: 2, 16384 bytes)
265[ 0.485301] audit: initializing netlink subsys (disabled)
266[ 0.486139] audit: type=2000 audit(1444779795.147:1): initialized
267[ 0.487398] HugeTLB registered 2 MB page size, pre-allocated 0 pages
268[ 0.488470] zbud: loaded
269[ 0.489000] VFS: Disk quotas dquot_6.5.2
270[ 0.489610] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
271[ 0.490641] msgmni has been set to 983
272[ 0.491538] alg: No test for stdrng (krng)
273[ 0.492223] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
274[ 0.493377] io scheduler noop registered
275[ 0.493980] io scheduler deadline registered
276[ 0.494661] io scheduler cfq registered (default)
277[ 0.495452] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
278[ 0.496344] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
279[ 0.497416] GHES: HEST is not enabled!
280[ 0.498070] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
281[ 0.522085] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
282[ 0.523576] Linux agpgart interface v0.103
283[ 0.524829] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
284[ 0.528193] serio: i8042 KBD port at 0x60,0x64 irq 1
285[ 0.529476] serio: i8042 AUX port at 0x60,0x64 irq 12
286[ 0.530985] mousedev: PS/2 mouse device common for all mice
287[ 0.532982] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
288[ 0.535503] rtc_cmos 00:00: RTC can wake from S4
289[ 0.536713] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
290[ 0.537859] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
291[ 0.539003] ledtrig-cpu: registered to indicate activity on CPUs
292[ 0.540044] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
293[ 0.540995] AMD IOMMUv2 functionality not available on this system
294[ 0.542009] TCP: cubic registered
295[ 0.542532] NET: Registered protocol family 10
296[ 0.543430] mip6: Mobile IPv6
297[ 0.543897] NET: Registered protocol family 17
298[ 0.544587] mpls_gso: MPLS GSO support
299[ 0.545419] registered taskstats version 1
300[ 0.546374] rtc_cmos 00:00: setting system clock to 2015-10-13 23:43:14 UTC (1444779794)
301[ 0.547622] PM: Hibernation image not present or could not be loaded.
302[ 0.549405] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
303[ 0.550582] Write protecting the kernel read-only data: 8192k
304[ 0.554298] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
305[ 0.556185] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
306[ 0.568237] systemd-udevd[52]: starting version 215
307[ 0.569356] random: systemd-udevd urandom read with 1 bits of entropy available
308[ 0.579628] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
309[ 0.580818] e1000: Copyright (c) 1999-2006 Intel Corporation.
310[ 0.590188] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
311[ 0.969288] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
312[ 0.970479] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
313[ 0.979092] FS-Cache: Loaded
314[ 0.983151] RPC: Registered named UNIX socket transport module.
315[ 0.984109] RPC: Registered udp transport module.
316[ 0.984839] RPC: Registered tcp transport module.
317[ 0.985536] RPC: Registered tcp NFSv4.1 backchannel transport module.
318[ 0.990995] FS-Cache: Netfs 'nfs' registered for caching
319[ 1.001710] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
320[ 1.480182] tsc: Refined TSC clocksource calibration: 2312.023 MHz
321[ 3.004732] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
322[ 3.007720] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
323[ 8.854911] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
324[ 8.858596] systemd[1]: Detected virtualization 'kvm'.
325[ 8.860033] systemd[1]: Detected architecture 'x86-64'.
326[ 10.381768] systemd[1]: Inserted module 'autofs4'
327[ 10.388968] systemd[1]: Set hostname to <cb-test-tgt>.
328[ 11.022994] random: nonblocking pool is initialized
329[ 12.855439] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
330[ 12.858954] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
331[ 12.863789] systemd[1]: Expecting device dev-ttyS0.device...
332[ 12.867662] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
333[ 12.869831] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
334[ 12.871882] systemd[1]: Starting Remote File Systems (Pre).
335[ 12.874453] systemd[1]: Reached target Remote File Systems (Pre).
336[ 12.875370] systemd[1]: Starting Encrypted Volumes.
337[ 12.877780] systemd[1]: Reached target Encrypted Volumes.
338[ 12.878605] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
339[ 12.879839] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
340[ 12.881060] systemd[1]: Starting Paths.
341[ 12.883168] systemd[1]: Reached target Paths.
342[ 12.883905] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
343[ 12.887147] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
344[ 12.888554] systemd[1]: Starting Swap.
345[ 12.890532] systemd[1]: Reached target Swap.
346[ 12.891180] systemd[1]: Starting Root Slice.
347[ 12.893400] systemd[1]: Created slice Root Slice.
348[ 12.894112] systemd[1]: Starting Delayed Shutdown Socket.
349[ 12.896542] systemd[1]: Listening on Delayed Shutdown Socket.
350[ 12.897432] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
351[ 12.901775] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
352[ 12.902814] systemd[1]: Starting Journal Socket (/dev/log).
353[ 12.906642] systemd[1]: Listening on Journal Socket (/dev/log).
354[ 12.907544] systemd[1]: Starting udev Kernel Socket.
355[ 12.910220] systemd[1]: Listening on udev Kernel Socket.
356[ 12.911159] systemd[1]: Starting udev Control Socket.
357[ 12.913853] systemd[1]: Listening on udev Control Socket.
358[ 12.914781] systemd[1]: Starting User and Session Slice.
359[ 12.917519] systemd[1]: Created slice User and Session Slice.
360[ 12.918520] systemd[1]: Starting Journal Socket.
361[ 12.920971] systemd[1]: Listening on Journal Socket.
362[ 12.921738] systemd[1]: Starting System Slice.
363[ 12.923896] systemd[1]: Created slice System Slice.
364[ 12.924696] systemd[1]: Starting Increase datagram queue length...
365[ 12.927524] systemd[1]: Mounting Debug File System...
366[ 12.929965] systemd[1]: Mounting POSIX Message Queue File System...
367[ 13.296762] systemd[1]: Starting Load Kernel Modules...
368[ 14.913071] systemd[1]: Started Set Up Additional Binary Formats.
369[ 14.921368] systemd[1]: Starting Create list of required static device nodes for the current kernel...
370[ 14.928505] systemd[1]: Starting udev Coldplug all Devices...
371[ 14.931583] systemd[1]: Mounting Huge Pages File System...
372[ 14.936052] systemd[1]: Starting system-getty.slice.
373[ 14.938369] systemd[1]: Created slice system-getty.slice.
374[ 14.939193] systemd[1]: Starting system-serial\x2dgetty.slice.
375[ 14.942417] systemd[1]: Created slice system-serial\x2dgetty.slice.
376[ 14.943363] systemd[1]: Starting Slices.
377[ 14.945501] systemd[1]: Reached target Slices.
378[ 14.946203] systemd[1]: Starting Remount Root and Kernel File Systems...
379[ 14.953537] systemd[1]: Started Increase datagram queue length.
380[ 14.956452] systemd[1]: Starting Syslog Socket.
381[ 14.958955] systemd[1]: Listening on Syslog Socket.
382[ 14.959708] systemd[1]: Starting Sockets.
383[ 14.961771] systemd[1]: Reached target Sockets.
384[ 14.962463] systemd[1]: Starting Journal Service...
385[ 14.966376] systemd[1]: Started Journal Service.
386[ 17.754370] systemd-udevd[127]: starting version 215
387[ 30.370564] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
388[ 30.376804] ACPI: Power Button [PWRF]
389[ 30.381933] Floppy drive(s): fd0 is 1.44M
390[ 30.397533] FDC 0 is a S82078B
391[ 30.781479] SCSI subsystem initialized
392[ 30.871720] input: PC Speaker as /devices/platform/pcspkr/input/input3
393[ 31.190320] libata version 3.00 loaded.
394[ 31.314345] parport_pc 00:03: reported by Plug and Play ACPI
395[ 31.318972] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
396[ 31.607667] [drm] Initialized drm 1.1.0 20060810
397[ 31.862446] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
398[ 31.870680] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
399[ 31.871718] i801_smbus 0000:00:1f.3: Enabling SMBus device
400[ 31.880160] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
401[ 32.287109] ahci 0000:00:1f.2: version 3.0
402[ 32.290665] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
403[ 32.292285] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
404[ 32.295347] ahci 0000:00:1f.2: flags: ncq only
405[ 32.303554] scsi0 : ahci
406[ 32.304315] scsi1 : ahci
407[ 32.304906] scsi2 : ahci
408[ 32.305465] scsi3 : ahci
409[ 32.306055] scsi4 : ahci
410[ 32.306625] scsi5 : ahci
411[ 32.307092] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
412[ 32.308197] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
413[ 32.309273] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
414[ 32.310343] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
415[ 32.311413] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
416[ 32.312601] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
417[ 32.579693] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
418[ 32.632289] ata2: SATA link down (SStatus 0 SControl 300)
419[ 32.634048] ata1: SATA link down (SStatus 0 SControl 300)
420[ 32.635890] ata4: SATA link down (SStatus 0 SControl 300)
421[ 32.637651] ata3: SATA link down (SStatus 0 SControl 300)
422[ 32.640766] ata5: SATA link down (SStatus 0 SControl 300)
423[ 32.642504] ata6: SATA link down (SStatus 0 SControl 300)
424[ 33.138258] ppdev: user-space parallel port driver
425[ 33.371295] iTCO_vendor_support: vendor-support=0
426[ 33.479516] kvm: Nested Virtualization enabled
427[ 33.496580] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
428[ 33.498204] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
429[ 33.500171] iTCO_wdt: timeout value out of range, using 30
430[ 33.502085] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
431[ 39.354659] Key type dns_resolver registered
432[ 39.886014] NFS: Registering the id_resolver key type
433[ 39.887035] Key type id_resolver registered
434[ 39.887826] Key type id_legacy registered
435[ 42.621818] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
436[ 75.384145] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
437[ 124.849335] systemd-journald[111]: Received request to flush runtime journal from PID 1
438[ 479.104100] nfs: server 10.100.1.1 not responding, still trying
439[ 479.105903] nfs: server 10.100.1.1 not responding, still trying
440[ 479.107668] nfs: server 10.100.1.1 not responding, still trying
441[ 479.109529] nfs: server 10.100.1.1 not responding, still trying
442[ 479.110485] nfs: server 10.100.1.1 not responding, still trying
443[ 479.111395] nfs: server 10.100.1.1 not responding, still trying
444[ 479.112305] nfs: server 10.100.1.1 not responding, still trying
445[ 479.113196] nfs: server 10.100.1.1 not responding, still trying
446[ 479.114080] nfs: server 10.100.1.1 not responding, still trying
447[ 479.114957] nfs: server 10.100.1.1 not responding, still trying
448[ 479.115837] nfs: server 10.100.1.1 not responding, still trying
449[ 479.116755] nfs: server 10.100.1.1 not responding, still trying
450[ 479.117639] nfs: server 10.100.1.1 not responding, still trying
451[ 479.118527] nfs: server 10.100.1.1 not responding, still trying
452[ 479.306546] nfs: server 10.100.1.1 OK
453[ 479.360311] nfs: server 10.100.1.1 OK
454[ 479.410472] nfs: server 10.100.1.1 OK
455[ 479.422441] nfs: server 10.100.1.1 OK
456[ 479.479599] nfs: server 10.100.1.1 OK
457[ 479.538017] nfs: server 10.100.1.1 OK
458[ 479.592289] nfs: server 10.100.1.1 OK
459[ 479.645158] nfs: server 10.100.1.1 OK
460[ 479.696416] nfs: server 10.100.1.1 OK
461[ 479.746999] nfs: server 10.100.1.1 OK
462[ 479.798935] nfs: server 10.100.1.1 OK
463[ 479.850373] nfs: server 10.100.1.1 OK
464[ 479.907134] nfs: server 10.100.1.1 OK
465[ 479.961297] nfs: server 10.100.1.1 OK