Gitiles
Code Review Sign In
review.coreboot.org / board-status / ec7365a0e0e6c6ecc19c27bb4db55f3c6d2f5348 / . / emulation / qemu-q35 / 4.0-9879-g34de29a / 2015-06-04T18:02:01Z / kernel_log.txt
blob: ea217b1de72d402cf703b8053c059a07faa657bf [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand08aba382015-06-04 22:25:11 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9855-g8a3ab31-dirty 06/04/2015
16[ 0.000000] Hypervisor detected: KVM
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges disabled:
23[ 0.000000] 00000-FFFFF uncachable
24[ 0.000000] MTRR variable ranges disabled:
25[ 0.000000] 0 disabled
26[ 0.000000] 1 disabled
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
34[ 0.000000] CPU MTRRs all blank - virtualized system.
35[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
36[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
37[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
38[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
39[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
40[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
41[ 0.000000] init_memory_mapping: [mem 0x1f200000-0x1f3fffff]
42[ 0.000000] [mem 0x1f200000-0x1f3fffff] page 2M
43[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1f1fffff]
44[ 0.000000] [mem 0x1c000000-0x1f1fffff] page 2M
45[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
46[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
47[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
48[ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1ff9ffff]
49[ 0.000000] [mem 0x1f400000-0x1fdfffff] page 2M
50[ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k
51[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
52[ 0.000000] RAMDISK: [mem 0x1f5f2000-0x1fe7bfff]
53[ 0.000000] ACPI: Early table checksum verification disabled
54[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
55[ 0.000000] ACPI: XSDT 0x000000001FFB90E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: FACP 0x000000001FFBAD90 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: DSDT 0x000000001FFB9250 001B37 (v01 CORE COREBOOT 00000002 INTL 20150204)
58[ 0.000000] ACPI: FACS 0x000000001FFB9210 000040
59[ 0.000000] ACPI: MCFG 0x000000001FFBAE90 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: TCPA 0x000000001FFBAED0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: APIC 0x000000001FFBAF10 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: HPET 0x000000001FFBAF70 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: Local APIC address 0xfee00000
64[ 0.000000] No NUMA configuration found
65[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff]
66[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff]
67[ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff]
68[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
69[ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock
70[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e400000-ffff88001ebfffff] on node 0
71[ 0.000000] Zone ranges:
72[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
73[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
74[ 0.000000] Normal empty
75[ 0.000000] Movable zone start for each node
76[ 0.000000] Early memory node ranges
77[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
78[ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff]
79[ 0.000000] On node 0 totalpages: 130878
80[ 0.000000] DMA zone: 56 pages used for memmap
81[ 0.000000] DMA zone: 21 pages reserved
82[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
83[ 0.000000] DMA32 zone: 1735 pages used for memmap
84[ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31
85[ 0.000000] ACPI: PM-Timer IO Port: 0x608
86[ 0.000000] ACPI: Local APIC address 0xfee00000
87[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
88[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
89[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
90[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
91[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
92[ 0.000000] ACPI: IRQ0 used by override.
93[ 0.000000] ACPI: IRQ2 used by override.
94[ 0.000000] ACPI: IRQ9 used by override.
95[ 0.000000] Using ACPI (MADT) for SMP configuration information
96[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
97[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
98[ 0.000000] nr_irqs_gsi: 40
99[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
100[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
101[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
102[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
103[ 0.000000] Booting paravirtualized kernel on KVM
104[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
105[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f200000 s80896 r8192 d21504 u2097152
106[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
107[ 0.000000] pcpu-alloc: [0] 0
108[ 0.000000] KVM setup async PF for cpu 0
109[ 0.000000] kvm-stealtime: cpu 0, msr 1f20d080
110[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066
111[ 0.000000] Policy zone: DMA32
112[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
113[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
114[ 0.000000] AGP: Checking aperture...
115[ 0.000000] AGP: No AGP bridge found
116[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
117[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
118[ 0.000000] Memory: 494868K/523512K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 28644K reserved)
119[ 0.000000] Hierarchical RCU implementation.
120[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
121[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
122[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
123[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
124[ 0.000000] Console: colour VGA+ 80x25
125[ 0.000000] console [tty0] enabled
126[ 0.000000] console [ttyS0] enabled
127[ 0.000000] hpet clockevent registered
128[ 0.000000] tsc: Detected 2311.846 MHz processor
129[ 0.008000] Calibrating delay loop (skipped) preset value.. 4623.69 BogoMIPS (lpj=9247384)
130[ 0.008000] pid_max: default: 32768 minimum: 301
131[ 0.008014] ACPI: Core revision 20140424
132[ 0.010812] ACPI: All ACPI Tables successfully acquired
133[ 0.013328] Security Framework initialized
134[ 0.014712] AppArmor: AppArmor disabled by boot time parameter
135[ 0.016004] Yama: disabled by default; enable with sysctl kernel.yama.*
136[ 0.018018] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
137[ 0.020176] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
138[ 0.021849] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
139[ 0.023358] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
140[ 0.024263] Initializing cgroup subsys memory
141[ 0.025404] Initializing cgroup subsys devices
142[ 0.026575] Initializing cgroup subsys freezer
143[ 0.028007] Initializing cgroup subsys net_cls
144[ 0.029192] Initializing cgroup subsys blkio
145[ 0.030327] Initializing cgroup subsys perf_event
146[ 0.032011] Initializing cgroup subsys net_prio
147[ 0.033285] mce: CPU supports 10 MCE banks
148[ 0.034482] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
149Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
150tlb_flushall_shift: -1
151[ 0.047321] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
152[ 0.053781] ftrace: allocating 21601 entries in 85 pages
153[ 0.061916] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
154[ 0.064002] smpboot: CPU0: AMD QEMU Virtual CPU version 2.1.2 (fam: 06, model: 02, stepping: 03)
155[ 0.068000] Performance Events: Broken PMU hardware detected, using software events only.
156[ 0.068000] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
157[ 0.069913] x86: Booted up 1 node, 1 CPUs
158[ 0.071096] smpboot: Total of 1 processors activated (4623.69 BogoMIPS)
159[ 0.072559] NMI watchdog: disabled (cpu0): hardware events not enabled
160[ 0.074125] devtmpfs: initialized
161[ 0.082060] pinctrl core: initialized pinctrl subsystem
162[ 0.083422] NET: Registered protocol family 16
163[ 0.084171] cpuidle: using governor ladder
164[ 0.085280] cpuidle: using governor menu
165[ 0.086493] ACPI: bus type PCI registered
166[ 0.088005] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
167[ 0.089591] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
168[ 0.092003] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
169[ 0.094429] PCI: Using configuration type 1 for base access
170[ 0.096991] ACPI: Added _OSI(Module Device)
171[ 0.098142] ACPI: Added _OSI(Processor Device)
172[ 0.099276] ACPI: Added _OSI(3.0 _SCP Extensions)
173[ 0.100003] ACPI: Added _OSI(Processor Aggregator Device)
174[ 0.106175] ACPI: Interpreter enabled
175[ 0.107278] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
176[ 0.109824] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
177[ 0.112011] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
178[ 0.114439] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
179[ 0.116817] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
180[ 0.119228] ACPI: (supports S0)
181[ 0.120012] ACPI: Using IOAPIC for interrupt routing
182[ 0.121262] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
183[ 0.126702] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
184[ 0.128008] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
185[ 0.130375] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
186[ 0.132123] PCI host bridge to bus 0000:00
187[ 0.133279] pci_bus 0000:00: root bus resource [bus 00-ff]
188[ 0.134577] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
189[ 0.136003] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
190[ 0.137412] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
191[ 0.138942] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
192[ 0.140053] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
193[ 0.140489] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
194[ 0.144007] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
195[ 0.148007] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
196[ 0.161332] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
197[ 0.161558] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
198[ 0.164006] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
199[ 0.166406] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
200[ 0.179561] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
201[ 0.180481] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
202[ 0.180905] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
203[ 0.183063] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
204[ 0.184242] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
205[ 0.197201] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
206[ 0.199514] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
207[ 0.201593] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
208[ 0.201813] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
209[ 0.202435] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
210[ 0.205275] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
211[ 0.207295] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
212[ 0.209204] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
213[ 0.211205] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
214[ 0.213220] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
215[ 0.215250] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
216[ 0.217213] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
217[ 0.219130] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
218[ 0.220740] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
219[ 0.222262] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
220[ 0.224018] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
221[ 0.225537] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
222[ 0.227038] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
223[ 0.228735] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
224[ 0.230234] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
225[ 0.232000] ACPI: Enabled 16 GPEs in block 00 to 3F
226[ 0.232169] vgaarb: setting as boot device: PCI:0000:00:01.0
227[ 0.233528] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
228[ 0.236002] vgaarb: loaded
229[ 0.236909] vgaarb: bridge control possible 0000:00:01.0
230[ 0.238257] PCI: Using ACPI for IRQ routing
231[ 0.293840] PCI: pci_cache_line_size set to 64 bytes
232[ 0.293951] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
233[ 0.293954] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff]
234[ 0.294157] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
235[ 0.295774] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
236[ 0.296877] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
237[ 0.302227] Switched to clocksource kvm-clock
238[ 0.309448] pnp: PnP ACPI init
239[ 0.310509] ACPI: bus type PNP registered
240[ 0.311999] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
241[ 0.312097] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
242[ 0.312153] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
243[ 0.312292] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
244[ 0.312371] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
245[ 0.312766] pnp: PnP ACPI: found 5 devices
246[ 0.314031] ACPI: bus type PNP unregistered
247[ 0.322311] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
248[ 0.323702] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
249[ 0.323705] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
250[ 0.323707] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
251[ 0.323709] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
252[ 0.323748] NET: Registered protocol family 2
253[ 0.325045] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
254[ 0.326563] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
255[ 0.327991] TCP: Hash tables configured (established 4096 bind 4096)
256[ 0.329423] TCP: reno registered
257[ 0.330361] UDP hash table entries: 256 (order: 1, 8192 bytes)
258[ 0.331693] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
259[ 0.333223] NET: Registered protocol family 1
260[ 0.334430] pci 0000:00:01.0: Video device with shadowed ROM
261[ 0.334493] PCI: CLS 64 bytes, default 64
262[ 0.334550] Unpacking initramfs...
263[ 0.537148] Freeing initrd memory: 8744K (ffff88001f5f2000 - ffff88001fe7c000)
264[ 0.539402] microcode: AMD CPU family 0x6 not supported
265[ 0.541075] futex hash table entries: 256 (order: 2, 16384 bytes)
266[ 0.542750] audit: initializing netlink subsys (disabled)
267[ 0.544165] audit: type=2000 audit(1433456280.718:1): initialized
268[ 0.545949] HugeTLB registered 2 MB page size, pre-allocated 0 pages
269[ 0.547467] zbud: loaded
270[ 0.548543] VFS: Disk quotas dquot_6.5.2
271[ 0.549687] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
272[ 0.551269] msgmni has been set to 983
273[ 0.552684] alg: No test for stdrng (krng)
274[ 0.553814] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
275[ 0.555867] io scheduler noop registered
276[ 0.557016] io scheduler deadline registered
277[ 0.558178] io scheduler cfq registered (default)
278[ 0.559462] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
279[ 0.561249] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
280[ 0.563318] GHES: HEST is not enabled!
281[ 0.564725] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
282[ 0.891677] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
283[ 0.894227] Linux agpgart interface v0.103
284[ 0.895503] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
285[ 0.898643] serio: i8042 KBD port at 0x60,0x64 irq 1
286[ 0.899968] serio: i8042 AUX port at 0x60,0x64 irq 12
287[ 0.901414] mousedev: PS/2 mouse device common for all mice
288[ 0.903109] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
289[ 0.905739] rtc_cmos 00:00: RTC can wake from S4
290[ 0.907352] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
291[ 0.909115] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
292[ 0.911324] ledtrig-cpu: registered to indicate activity on CPUs
293[ 0.912947] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
294[ 0.914531] AMD IOMMUv2 functionality not available on this system
295[ 0.916134] TCP: cubic registered
296[ 0.917230] NET: Registered protocol family 10
297[ 0.918667] mip6: Mobile IPv6
298[ 0.919704] NET: Registered protocol family 17
299[ 0.920919] mpls_gso: MPLS GSO support
300[ 0.922310] registered taskstats version 1
301[ 0.923836] rtc_cmos 00:00: setting system clock to 2015-06-04 22:18:01 UTC (1433456281)
302[ 0.926210] PM: Hibernation image not present or could not be loaded.
303[ 0.927901] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
304[ 0.930112] Write protecting the kernel read-only data: 8192k
305[ 0.934293] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
306[ 0.937109] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
307[ 0.948173] systemd-udevd[52]: starting version 215
308[ 0.949877] random: systemd-udevd urandom read with 2 bits of entropy available
309[ 0.966583] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
310[ 0.968261] e1000: Copyright (c) 1999-2006 Intel Corporation.
311[ 0.975661] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
312[ 1.370305] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
313[ 1.371906] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
314[ 1.380060] FS-Cache: Loaded
315[ 1.384601] RPC: Registered named UNIX socket transport module.
316[ 1.386066] RPC: Registered udp transport module.
317[ 1.387330] RPC: Registered tcp transport module.
318[ 1.388599] RPC: Registered tcp NFSv4.1 backchannel transport module.
319[ 1.394726] FS-Cache: Netfs 'nfs' registered for caching
320[ 1.405754] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
321[ 1.536114] tsc: Refined TSC clocksource calibration: 2312.034 MHz
322[ 3.408735] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
323[ 3.413394] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
324[ 8.379253] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
325[ 8.384506] systemd[1]: Detected virtualization 'kvm'.
326[ 8.385858] systemd[1]: Detected architecture 'x86-64'.
327[ 10.040828] systemd[1]: Inserted module 'autofs4'
328[ 10.053155] systemd[1]: Set hostname to <cb-test-tgt>.
329[ 10.163918] random: nonblocking pool is initialized
330[ 12.516366] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
331[ 12.521451] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
332[ 12.527038] systemd[1]: Expecting device dev-ttyS0.device...
333[ 12.529847] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
334[ 12.531945] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
335[ 12.534101] systemd[1]: Starting Remote File Systems (Pre).
336[ 12.537047] systemd[1]: Reached target Remote File Systems (Pre).
337[ 12.538509] systemd[1]: Starting Encrypted Volumes.
338[ 12.541554] systemd[1]: Reached target Encrypted Volumes.
339[ 12.543330] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
340[ 12.545562] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
341[ 12.548251] systemd[1]: Starting Paths.
342[ 12.550655] systemd[1]: Reached target Paths.
343[ 12.551815] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
344[ 12.556041] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
345[ 12.558956] systemd[1]: Starting Swap.
346[ 12.561414] systemd[1]: Reached target Swap.
347[ 12.562554] systemd[1]: Starting Root Slice.
348[ 12.565371] systemd[1]: Created slice Root Slice.
349[ 12.566869] systemd[1]: Starting Delayed Shutdown Socket.
350[ 12.570060] systemd[1]: Listening on Delayed Shutdown Socket.
351[ 12.571521] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
352[ 12.576316] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
353[ 12.577904] systemd[1]: Starting Journal Socket (/dev/log).
354[ 12.581858] systemd[1]: Listening on Journal Socket (/dev/log).
355[ 12.583298] systemd[1]: Starting udev Kernel Socket.
356[ 12.586166] systemd[1]: Listening on udev Kernel Socket.
357[ 12.587670] systemd[1]: Starting udev Control Socket.
358[ 12.590754] systemd[1]: Listening on udev Control Socket.
359[ 12.592404] systemd[1]: Starting User and Session Slice.
360[ 12.595985] systemd[1]: Created slice User and Session Slice.
361[ 12.597793] systemd[1]: Starting Journal Socket.
362[ 12.600580] systemd[1]: Listening on Journal Socket.
363[ 12.601844] systemd[1]: Starting System Slice.
364[ 12.604661] systemd[1]: Created slice System Slice.
365[ 12.606131] systemd[1]: Starting Increase datagram queue length...
366[ 12.609441] systemd[1]: Mounting Debug File System...
367[ 12.612385] systemd[1]: Mounting POSIX Message Queue File System...
368[ 12.679590] systemd[1]: Starting Load Kernel Modules...
369[ 13.011905] systemd[1]: Started Set Up Additional Binary Formats.
370[ 13.025929] systemd[1]: Starting Create list of required static device nodes for the current kernel...
371[ 13.035760] systemd[1]: Starting udev Coldplug all Devices...
372[ 13.043507] systemd[1]: Mounting Huge Pages File System...
373[ 13.048344] systemd[1]: Starting system-getty.slice.
374[ 13.052972] systemd[1]: Created slice system-getty.slice.
375[ 13.054325] systemd[1]: Starting system-serial\x2dgetty.slice.
376[ 13.058245] systemd[1]: Created slice system-serial\x2dgetty.slice.
377[ 13.060064] systemd[1]: Starting Slices.
378[ 13.062684] systemd[1]: Reached target Slices.
379[ 13.064139] systemd[1]: Starting Remount Root and Kernel File Systems...
380[ 13.952207] systemd[1]: Started Increase datagram queue length.
381[ 13.955432] systemd[1]: Starting Syslog Socket.
382[ 13.959825] systemd[1]: Listening on Syslog Socket.
383[ 13.962000] systemd[1]: Starting Sockets.
384[ 13.965475] systemd[1]: Reached target Sockets.
385[ 13.966698] systemd[1]: Starting Journal Service...
386[ 13.971616] systemd[1]: Started Journal Service.
387[ 16.839085] systemd-udevd[125]: starting version 215
388[ 25.928073] nfs: server 10.100.1.1 not responding, still trying
389[ 25.930437] nfs: server 10.100.1.1 not responding, still trying
390[ 25.933159] nfs: server 10.100.1.1 not responding, still trying
391[ 25.935618] nfs: server 10.100.1.1 not responding, still trying
392[ 25.938336] nfs: server 10.100.1.1 not responding, still trying
393[ 25.940780] nfs: server 10.100.1.1 not responding, still trying
394[ 25.970028] nfs: server 10.100.1.1 OK
395[ 26.060662] nfs: server 10.100.1.1 OK
396[ 26.123132] nfs: server 10.100.1.1 OK
397[ 26.203183] nfs: server 10.100.1.1 OK
398[ 26.295448] nfs: server 10.100.1.1 OK
399[ 26.324741] nfs: server 10.100.1.1 OK
400[ 26.672098] nfs: server 10.100.1.1 not responding, still trying
401[ 26.674632] nfs: server 10.100.1.1 not responding, still trying
402[ 26.677779] nfs: server 10.100.1.1 not responding, still trying
403[ 26.680936] nfs: server 10.100.1.1 not responding, still trying
404[ 26.683525] nfs: server 10.100.1.1 not responding, still trying
405[ 26.685680] nfs: server 10.100.1.1 not responding, still trying
406[ 26.687133] nfs: server 10.100.1.1 not responding, still trying
407[ 26.688745] nfs: server 10.100.1.1 not responding, still trying
408[ 27.116084] nfs: server 10.100.1.1 not responding, still trying
409[ 27.252085] nfs: server 10.100.1.1 not responding, still trying
410[ 27.309092] nfs: server 10.100.1.1 OK
411[ 27.363947] nfs: server 10.100.1.1 OK
412[ 27.458319] nfs: server 10.100.1.1 OK
413[ 27.520983] nfs: server 10.100.1.1 OK
414[ 27.569455] nfs: server 10.100.1.1 OK
415[ 27.665598] nfs: server 10.100.1.1 OK
416[ 27.704106] nfs: server 10.100.1.1 OK
417[ 27.813762] nfs: server 10.100.1.1 OK
418[ 28.141285] nfs: server 10.100.1.1 OK
419[ 28.209147] nfs: server 10.100.1.1 OK
420[ 29.636112] nfs: server 10.100.1.1 not responding, still trying
421[ 29.900086] nfs: server 10.100.1.1 not responding, still trying
422[ 29.902664] nfs: server 10.100.1.1 not responding, still trying
423[ 29.905423] nfs: server 10.100.1.1 not responding, still trying
424[ 29.907839] nfs: server 10.100.1.1 not responding, still trying
425[ 29.910537] nfs: server 10.100.1.1 not responding, still trying
426[ 29.912907] nfs: server 10.100.1.1 not responding, still trying
427[ 30.064412] nfs: server 10.100.1.1 OK
428[ 30.147668] nfs: server 10.100.1.1 OK
429[ 30.199283] nfs: server 10.100.1.1 OK
430[ 30.278001] nfs: server 10.100.1.1 OK
431[ 30.340358] nfs: server 10.100.1.1 OK
432[ 30.353328] nfs: server 10.100.1.1 OK
433[ 30.456358] nfs: server 10.100.1.1 OK
434[ 30.524141] nfs: server 10.100.1.1 not responding, still trying
435[ 30.526553] nfs: server 10.100.1.1 not responding, still trying
436[ 30.529105] nfs: server 10.100.1.1 not responding, still trying
437[ 30.531343] nfs: server 10.100.1.1 not responding, still trying
438[ 30.814616] nfs: server 10.100.1.1 OK
439[ 30.910215] nfs: server 10.100.1.1 OK
440[ 30.996563] nfs: server 10.100.1.1 OK
441[ 31.102920] nfs: server 10.100.1.1 OK
442[ 32.016206] nfs: server 10.100.1.1 not responding, still trying
443[ 32.019861] nfs: server 10.100.1.1 not responding, still trying
444[ 32.023434] nfs: server 10.100.1.1 not responding, still trying
445[ 32.025597] nfs: server 10.100.1.1 not responding, still trying
446[ 32.027050] nfs: server 10.100.1.1 not responding, still trying
447[ 32.028602] nfs: server 10.100.1.1 not responding, still trying
448[ 32.030066] nfs: server 10.100.1.1 not responding, still trying
449[ 32.340077] nfs: server 10.100.1.1 not responding, still trying
450[ 32.408077] nfs: server 10.100.1.1 not responding, still trying
451[ 32.930726] nfs: server 10.100.1.1 OK
452[ 33.177652] nfs: server 10.100.1.1 OK
453[ 33.233808] nfs: server 10.100.1.1 OK
454[ 33.282322] nfs: server 10.100.1.1 OK
455[ 33.375177] nfs: server 10.100.1.1 OK
456[ 33.424108] nfs: server 10.100.1.1 OK
457[ 33.473246] nfs: server 10.100.1.1 OK
458[ 33.475609] nfs: server 10.100.1.1 OK
459[ 33.553267] nfs: server 10.100.1.1 OK
460[ 34.264080] nfs: server 10.100.1.1 not responding, still trying
461[ 34.404111] nfs: server 10.100.1.1 not responding, still trying
462[ 34.407087] nfs: server 10.100.1.1 not responding, still trying
463[ 34.409858] nfs: server 10.100.1.1 not responding, still trying
464[ 34.793118] nfs: server 10.100.1.1 OK
465[ 34.795227] nfs: server 10.100.1.1 OK
466[ 34.797929] nfs: server 10.100.1.1 OK
467[ 34.800504] nfs: server 10.100.1.1 OK
468[ 35.729612] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
469[ 35.733884] ACPI: Power Button [PWRF]
470[ 36.029595] parport_pc 00:03: reported by Plug and Play ACPI
471[ 36.031578] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
472[ 36.660652] input: PC Speaker as /devices/platform/pcspkr/input/input4
473[ 37.000216] SCSI subsystem initialized
474[ 37.102616] Floppy drive(s): fd0 is 1.44M
475[ 37.120824] FDC 0 is a S82078B
476[ 37.338134] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
477[ 37.938795] [drm] Initialized drm 1.1.0 20060810
478[ 38.626535] libata version 3.00 loaded.
479[ 38.662601] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
480[ 38.667538] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
481[ 38.670889] i801_smbus 0000:00:1f.3: Enabling SMBus device
482[ 38.673633] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
483[ 39.004180] ppdev: user-space parallel port driver
484[ 40.308054] iTCO_vendor_support: vendor-support=0
485[ 40.761326] ahci 0000:00:1f.2: version 3.0
486[ 40.762333] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
487[ 40.763685] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
488[ 40.767143] ahci 0000:00:1f.2: flags: ncq only
489[ 40.773335] scsi0 : ahci
490[ 40.774734] scsi1 : ahci
491[ 40.776580] scsi2 : ahci
492[ 40.777657] scsi3 : ahci
493[ 40.778698] scsi4 : ahci
494[ 40.779729] scsi5 : ahci
495[ 40.780767] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
496[ 40.782810] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
497[ 40.784861] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
498[ 40.787125] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
499[ 40.789227] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
500[ 40.791359] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
501[ 40.827062] kvm: Nested Virtualization enabled
502[ 40.927206] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
503[ 40.931969] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
504[ 40.934837] iTCO_wdt: timeout value out of range, using 30
505[ 40.938386] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
506[ 41.112271] ata1: SATA link down (SStatus 0 SControl 300)
507[ 41.114930] ata2: SATA link down (SStatus 0 SControl 300)
508[ 41.117994] ata3: SATA link down (SStatus 0 SControl 300)
509[ 41.121324] ata4: SATA link down (SStatus 0 SControl 300)
510[ 41.123218] ata5: SATA link down (SStatus 0 SControl 300)
511[ 41.124694] ata6: SATA link down (SStatus 0 SControl 300)
512[ 47.527842] Key type dns_resolver registered
513[ 48.302395] NFS: Registering the id_resolver key type
514[ 48.304590] Key type id_resolver registered
515[ 48.306321] Key type id_legacy registered
516[ 51.254330] systemd-journald[109]: Received request to flush runtime journal from PID 1
517[ 51.753371] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
518[ 86.331724] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****