Raptor Engineering Automated Coreboot Test Stand | fce7605 | 2016-03-12 22:11:00 +0000 | [diff] [blame] | 1 | [ 0.000000] Initializing cgroup subsys cpuset |
| 2 | [ 0.000000] Initializing cgroup subsys cpu |
| 3 | [ 0.000000] Initializing cgroup subsys cpuacct |
| 4 | [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) |
| 5 | [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 |
| 6 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 7 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| 8 | [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| 9 | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| 10 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable |
| 11 | [ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved |
| 12 | [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable |
| 13 | [ 0.000000] NX (Execute Disable) protection: active |
| 14 | [ 0.000000] SMBIOS 2.7 present. |
| 15 | [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 03/12/2016 |
| 16 | [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 17 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 18 | [ 0.000000] AGP: No AGP bridge found |
| 19 | [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 |
| 20 | [ 0.000000] MTRR default type: uncachable |
| 21 | [ 0.000000] MTRR fixed ranges enabled: |
| 22 | [ 0.000000] 00000-9FFFF write-back |
| 23 | [ 0.000000] A0000-BFFFF uncachable |
| 24 | [ 0.000000] C0000-FFFFF write-back |
| 25 | [ 0.000000] MTRR variable ranges enabled: |
| 26 | [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| 27 | [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| 28 | [ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining |
| 29 | [ 0.000000] 3 disabled |
| 30 | [ 0.000000] 4 disabled |
| 31 | [ 0.000000] 5 disabled |
| 32 | [ 0.000000] 6 disabled |
| 33 | [ 0.000000] 7 disabled |
| 34 | [ 0.000000] TOM2: 0000000180000000 aka 6144M |
| 35 | [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| 36 | [ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000 |
| 37 | [ 0.000000] found SMP MP-table at [mem 0x000f0780-0x000f078f] mapped at [ffff8800000f0780] |
| 38 | [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| 39 | [ 0.000000] Using GB pages for direct mapping |
| 40 | [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| 41 | [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| 42 | [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| 43 | [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| 44 | [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| 45 | [ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff] |
| 46 | [ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G |
| 47 | [ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff] |
| 48 | [ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G |
| 49 | [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff] |
| 50 | [ 0.000000] [mem 0x100000000-0x17bffffff] page 1G |
| 51 | [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff] |
| 52 | [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| 53 | [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| 54 | [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G |
| 55 | [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M |
| 56 | [ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k |
| 57 | [ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff] |
| 58 | [ 0.000000] ACPI: Early table checksum verification disabled |
| 59 | [ 0.000000] ACPI: RSDP 0x00000000000F0950 000024 (v02 CORE ) |
| 60 | [ 0.000000] ACPI: XSDT 0x00000000BFFB30E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 61 | [ 0.000000] ACPI: FACP 0x00000000BFFB58D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 62 | [ 0.000000] ACPI: DSDT 0x00000000BFFB3280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150619) |
| 63 | [ 0.000000] ACPI: FACS 0x00000000BFFB3240 000040 |
| 64 | [ 0.000000] ACPI: SSDT 0x00000000BFFB59D0 000EA6 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 65 | [ 0.000000] ACPI: TCPA 0x00000000BFFB6880 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| 66 | [ 0.000000] ACPI: APIC 0x00000000BFFB68C0 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 67 | [ 0.000000] ACPI: SRAT 0x00000000BFFB6990 000150 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 68 | [ 0.000000] ACPI: SLIT 0x00000000BFFB6AE0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 69 | [ 0.000000] ACPI: HPET 0x00000000BFFB6B10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 70 | [ 0.000000] ACPI: SRAT 0x00000000BFFB6B50 000150 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 71 | [ 0.000000] ACPI: SLIT 0x00000000BFFB6CA0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 72 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 73 | [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| 74 | [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| 75 | [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| 76 | [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 |
| 77 | [ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1 |
| 78 | [ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1 |
| 79 | [ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1 |
| 80 | [ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1 |
| 81 | [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| 82 | [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| 83 | [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| 84 | [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff] |
| 85 | [ 0.000000] NUMA: Initialized distance table, cnt=2 |
| 86 | [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] |
| 87 | [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff] |
| 88 | [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| 89 | [ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff] |
| 90 | [ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff] |
| 91 | [ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff] |
| 92 | [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0 |
| 93 | [ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1 |
| 94 | [ 0.000000] Zone ranges: |
| 95 | [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| 96 | [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| 97 | [ 0.000000] Normal [mem 0x100000000-0x17fffffff] |
| 98 | [ 0.000000] Movable zone start for each node |
| 99 | [ 0.000000] Early memory node ranges |
| 100 | [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| 101 | [ 0.000000] node 0: [mem 0x00100000-0xbff99fff] |
| 102 | [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| 103 | [ 0.000000] node 1: [mem 0x140000000-0x17fffffff] |
| 104 | [ 0.000000] On node 0 totalpages: 1048376 |
| 105 | [ 0.000000] DMA zone: 56 pages used for memmap |
| 106 | [ 0.000000] DMA zone: 21 pages reserved |
| 107 | [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| 108 | [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| 109 | [ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31 |
| 110 | [ 0.000000] Normal zone: 3584 pages used for memmap |
| 111 | [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| 112 | [ 0.000000] On node 1 totalpages: 262144 |
| 113 | [ 0.000000] Normal zone: 3584 pages used for memmap |
| 114 | [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| 115 | [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 |
| 116 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 117 | [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| 118 | [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| 119 | [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| 120 | [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| 121 | [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) |
| 122 | [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) |
| 123 | [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) |
| 124 | [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) |
| 125 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| 126 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| 127 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| 128 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| 129 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) |
| 130 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) |
| 131 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) |
| 132 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) |
| 133 | [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) |
| 134 | [ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23 |
| 135 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| 136 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| 137 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| 138 | [ 0.000000] ACPI: IRQ9 used by override. |
| 139 | [ 0.000000] ACPI: IRQ14 used by override. |
| 140 | [ 0.000000] ACPI: IRQ15 used by override. |
| 141 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 142 | [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| 143 | [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| 144 | [ 0.000000] nr_irqs_gsi: 40 |
| 145 | [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| 146 | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| 147 | [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| 148 | [ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff] |
| 149 | [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff] |
| 150 | [ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices |
| 151 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 152 | [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2 |
| 153 | [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| 154 | [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| 155 | [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 |
| 156 | [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580 |
| 157 | [ 0.000000] Policy zone: Normal |
| 158 | [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 |
| 159 | [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| 160 | [ 0.000000] AGP: Checking aperture... |
| 161 | [ 0.000000] AGP: No AGP bridge found |
| 162 | [ 0.000000] AGP: Node 0: aperture [bus addr 0xa5fa000000-0xa5fbffffff] (32MB) |
| 163 | [ 0.000000] Aperture beyond 4GB. Ignoring. |
| 164 | [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| 165 | [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| 166 | [ 0.000000] AGP: This costs you 64MB of RAM |
| 167 | [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| 168 | [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| 169 | [ 0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved) |
| 170 | [ 0.000000] Hierarchical RCU implementation. |
| 171 | [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| 172 | [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. |
| 173 | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| 174 | [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 |
| 175 | [ 0.000000] spurious 8259A interrupt: IRQ7. |
| 176 | [ 0.000000] Console: colour VGA+ 80x25 |
| 177 | [ 0.000000] console [ttyS0] enabled |
| 178 | [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| 179 | [ 0.000000] hpet clockevent registered |
| 180 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 181 | [ 0.000000] tsc: Detected 1909.868 MHz processor |
| 182 | [ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.73 BogoMIPS (lpj=7639472) |
| 183 | [ 0.010796] pid_max: default: 32768 minimum: 301 |
| 184 | [ 0.015442] ACPI: Core revision 20140424 |
| 185 | [ 0.021802] ACPI: All ACPI Tables successfully acquired |
| 186 | [ 0.027153] Security Framework initialized |
| 187 | [ 0.031272] AppArmor: AppArmor disabled by boot time parameter |
| 188 | [ 0.037108] Yama: disabled by default; enable with sysctl kernel.yama.* |
| 189 | [ 0.044837] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| 190 | [ 0.057948] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| 191 | [ 0.067677] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| 192 | [ 0.074582] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| 193 | [ 0.082436] Initializing cgroup subsys memory |
| 194 | [ 0.086822] Initializing cgroup subsys devices |
| 195 | [ 0.091282] Initializing cgroup subsys freezer |
| 196 | [ 0.095738] Initializing cgroup subsys net_cls |
| 197 | [ 0.100194] Initializing cgroup subsys blkio |
| 198 | [ 0.104482] Initializing cgroup subsys perf_event |
| 199 | [ 0.109199] Initializing cgroup subsys net_prio |
| 200 | [ 0.113786] tseg: 0000000000 |
| 201 | [ 0.113798] CPU: Physical Processor ID: 0 |
| 202 | [ 0.117818] CPU: Processor Core ID: 0 |
| 203 | [ 0.121492] mce: CPU supports 6 MCE banks |
| 204 | [ 0.125520] LVT offset 0 assigned for vector 0xf9 |
| 205 | [ 0.130239] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 |
| 206 | Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 |
| 207 | tlb_flushall_shift: 6 |
| 208 | [ 0.145578] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000) |
| 209 | [ 0.154590] ftrace: allocating 21614 entries in 85 pages |
| 210 | [ 0.169930] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| 211 | [ 0.215462] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01) |
| 212 | [ 0.332522] Performance Events: AMD PMU driver. |
| 213 | [ 0.337090] ... version: 0 |
| 214 | [ 0.341102] ... bit width: 48 |
| 215 | [ 0.345201] ... generic registers: 4 |
| 216 | [ 0.349216] ... value mask: 0000ffffffffffff |
| 217 | [ 0.354530] ... max period: 00007fffffffffff |
| 218 | [ 0.359850] ... fixed-purpose events: 0 |
| 219 | [ 0.363863] ... event mask: 000000000000000f |
| 220 | [ 0.371736] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| 221 | [ 0.379935] x86: Booting SMP configuration: |
| 222 | [ 0.384129] .... node #0, CPUs: #1 #2 #3 |
| 223 | [ 0.428503] .... node #1, CPUs: #4 #5 #6 #7 |
| 224 | [ 0.581231] x86: Booted up 2 nodes, 8 CPUs |
| 225 | [ 0.585534] smpboot: Total of 8 processors activated (30558.19 BogoMIPS) |
| 226 | [ 0.598038] devtmpfs: initialized |
| 227 | [ 0.609349] pinctrl core: initialized pinctrl subsystem |
| 228 | [ 0.614745] NET: Registered protocol family 16 |
| 229 | [ 0.619405] cpuidle: using governor ladder |
| 230 | [ 0.623508] cpuidle: using governor menu |
| 231 | [ 0.627445] node 0 link 1: io port [1000, 3fff] |
| 232 | [ 0.627449] TOM: 00000000c0000000 aka 3072M |
| 233 | [ 0.631641] Fam 10h mmconf [mem 0xc0000000-0xcfffffff] |
| 234 | [ 0.631645] node 0 link 1: mmio [fc000000, fc3fffff] |
| 235 | [ 0.631648] node 0 link 1: mmio [f8000000, fbffffff] |
| 236 | [ 0.631650] TOM2: 0000000180000000 aka 6144M |
| 237 | [ 0.635930] bus: [bus 00-05] on node 0 link 1 |
| 238 | [ 0.635932] bus: 00 [io 0x0000-0xffff] |
| 239 | [ 0.635934] bus: 00 [mem 0xd0000000-0xffffffff] |
| 240 | [ 0.635936] bus: 00 [mem 0x180000000-0xfcffffffff] |
| 241 | [ 0.636044] ACPI: bus type PCI registered |
| 242 | [ 0.640064] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 243 | [ 0.646678] PCI: Using configuration type 1 for base access |
| 244 | [ 0.652251] PCI: Using configuration type 1 for extended access |
| 245 | [ 0.669336] ACPI: Added _OSI(Module Device) |
| 246 | [ 0.673532] ACPI: Added _OSI(Processor Device) |
| 247 | [ 0.677984] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 248 | [ 0.682694] ACPI: Added _OSI(Processor Aggregator Device) |
| 249 | [ 0.691668] ACPI: Interpreter enabled |
| 250 | [ 0.695349] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| 251 | [ 0.704623] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| 252 | [ 0.713895] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| 253 | [ 0.723165] ACPI: (supports S0 S1 S5) |
| 254 | [ 0.726836] ACPI: Using IOAPIC for interrupt routing |
| 255 | [ 0.731844] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 256 | [ 0.759686] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| 257 | [ 0.765874] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| 258 | [ 0.774082] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| 259 | [ 0.813011] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| 260 | [ 0.823013] PCI host bridge to bus 0000:00 |
| 261 | [ 0.827121] pci_bus 0000:00: root bus resource [bus 00-05] |
| 262 | [ 0.832612] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] |
| 263 | [ 0.838798] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| 264 | [ 0.845676] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| 265 | [ 0.852548] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff] |
| 266 | [ 0.859426] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| 267 | [ 0.865624] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| 268 | [ 0.865834] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| 269 | [ 0.865841] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f] |
| 270 | [ 0.865980] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| 271 | [ 0.865987] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f] |
| 272 | [ 0.866013] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf] |
| 273 | [ 0.866033] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff] |
| 274 | [ 0.866082] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| 275 | [ 0.866180] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| 276 | [ 0.866188] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff] |
| 277 | [ 0.866240] pci 0000:00:02.0: supports D1 D2 |
| 278 | [ 0.866250] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 279 | [ 0.866296] pci 0000:00:02.0: System wakeup disabled by ACPI |
| 280 | [ 0.872022] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| 281 | [ 0.872037] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff] |
| 282 | [ 0.872089] pci 0000:00:02.1: supports D1 D2 |
| 283 | [ 0.872099] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| 284 | [ 0.872170] pci 0000:00:02.1: System wakeup disabled by ACPI |
| 285 | [ 0.877907] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| 286 | [ 0.877936] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f] |
| 287 | [ 0.877947] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| 288 | [ 0.885079] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| 289 | [ 0.891608] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| 290 | [ 0.898742] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| 291 | [ 0.905381] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| 292 | [ 0.905389] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057] |
| 293 | [ 0.905398] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073] |
| 294 | [ 0.905402] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f] |
| 295 | [ 0.905407] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077] |
| 296 | [ 0.905412] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f] |
| 297 | [ 0.905417] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff] |
| 298 | [ 0.905515] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| 299 | [ 0.905525] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067] |
| 300 | [ 0.905530] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b] |
| 301 | [ 0.905535] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f] |
| 302 | [ 0.905539] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f] |
| 303 | [ 0.905544] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f] |
| 304 | [ 0.905549] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff] |
| 305 | [ 0.905676] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| 306 | [ 0.905767] pci 0000:00:09.0: System wakeup disabled by ACPI |
| 307 | [ 0.911491] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| 308 | [ 0.911543] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 309 | [ 0.911590] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| 310 | [ 0.917313] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| 311 | [ 0.917382] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 312 | [ 0.917428] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| 313 | [ 0.923145] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| 314 | [ 0.923185] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 315 | [ 0.923244] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| 316 | [ 0.928966] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| 317 | [ 0.929004] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 318 | [ 0.929077] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| 319 | [ 0.934812] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 |
| 320 | [ 0.934941] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 |
| 321 | [ 0.935074] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 |
| 322 | [ 0.935166] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 |
| 323 | [ 0.935286] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 |
| 324 | [ 0.935411] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 |
| 325 | [ 0.935532] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 |
| 326 | [ 0.935648] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 |
| 327 | [ 0.935773] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 |
| 328 | [ 0.935925] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 |
| 329 | [ 0.936112] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| 330 | [ 0.936137] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| 331 | [ 0.936156] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff] |
| 332 | [ 0.936170] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f] |
| 333 | [ 0.936215] pci 0000:01:04.0: supports D1 D2 |
| 334 | [ 0.936331] pci 0000:00:09.0: PCI bridge to [bus 01] |
| 335 | [ 0.941299] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| 336 | [ 0.941302] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| 337 | [ 0.941305] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| 338 | [ 0.941411] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| 339 | [ 0.941469] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit] |
| 340 | [ 0.941504] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref] |
| 341 | [ 0.941583] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| 342 | [ 0.941658] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| 343 | [ 0.951656] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| 344 | [ 0.956626] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| 345 | [ 0.956724] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| 346 | [ 0.956765] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit] |
| 347 | [ 0.956872] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| 348 | [ 0.956963] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| 349 | [ 0.966963] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| 350 | [ 0.971937] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| 351 | [ 0.972012] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| 352 | [ 0.977067] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| 353 | [ 0.982043] pci_bus 0000:00: on NUMA node 0 |
| 354 | [ 0.982141] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| 355 | [ 0.988288] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| 356 | [ 0.994423] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| 357 | [ 1.001732] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| 358 | [ 1.009030] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| 359 | [ 1.016320] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| 360 | [ 1.023614] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| 361 | [ 1.029739] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| 362 | [ 1.035867] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| 363 | [ 1.043176] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| 364 | [ 1.050468] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| 365 | [ 1.057773] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| 366 | [ 1.063908] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| 367 | [ 1.070041] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| 368 | [ 1.077344] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| 369 | [ 1.084636] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| 370 | [ 1.091928] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| 371 | [ 1.100441] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| 372 | [ 1.106905] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| 373 | [ 1.113388] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| 374 | [ 1.119853] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| 375 | [ 1.126563] ACPI: Enabled 1 GPEs in block 00 to 1F |
| 376 | [ 1.131685] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| 377 | [ 1.137355] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| 378 | [ 1.145444] vgaarb: loaded |
| 379 | [ 1.148158] vgaarb: bridge control possible 0000:01:04.0 |
| 380 | [ 1.153638] PCI: Using ACPI for IRQ routing |
| 381 | [ 1.157833] PCI: pci_cache_line_size set to 64 bytes |
| 382 | [ 1.157890] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| 383 | [ 1.157893] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff] |
| 384 | [ 1.158201] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| 385 | [ 1.165256] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| 386 | [ 1.170319] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| 387 | [ 1.179005] Switched to clocksource hpet |
| 388 | [ 1.194644] pnp: PnP ACPI init |
| 389 | [ 1.197758] ACPI: bus type PNP registered |
| 390 | [ 1.202286] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| 391 | [ 1.202373] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| 392 | [ 1.202455] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| 393 | [ 1.202553] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| 394 | [ 1.202590] pnp 00:04: [dma 2] |
| 395 | [ 1.202638] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| 396 | [ 1.202660] pnp: PnP ACPI: found 5 devices |
| 397 | [ 1.206768] ACPI: bus type PNP unregistered |
| 398 | [ 1.218818] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window |
| 399 | [ 1.228768] pci 0000:00:09.0: PCI bridge to [bus 01] |
| 400 | [ 1.233743] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| 401 | [ 1.239844] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| 402 | [ 1.246633] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| 403 | [ 1.253870] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref] |
| 404 | [ 1.261094] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| 405 | [ 1.266070] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| 406 | [ 1.272862] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| 407 | [ 1.277834] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| 408 | [ 1.284628] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| 409 | [ 1.289601] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| 410 | [ 1.294576] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff] |
| 411 | [ 1.294578] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] |
| 412 | [ 1.294581] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff] |
| 413 | [ 1.294583] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff] |
| 414 | [ 1.294586] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7] |
| 415 | [ 1.294589] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| 416 | [ 1.294592] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| 417 | [ 1.294594] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| 418 | [ 1.294597] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff] |
| 419 | [ 1.294600] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff] |
| 420 | [ 1.294749] NET: Registered protocol family 2 |
| 421 | [ 1.299648] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| 422 | [ 1.307341] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| 423 | [ 1.314675] TCP: Hash tables configured (established 65536 bind 65536) |
| 424 | [ 1.321280] TCP: reno registered |
| 425 | [ 1.324540] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| 426 | [ 1.330746] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| 427 | [ 1.337529] NET: Registered protocol family 1 |
| 428 | [ 1.342275] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| 429 | [ 1.348363] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| 430 | [ 1.354273] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 431 | [ 1.359800] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 432 | [ 1.365311] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| 433 | [ 1.370900] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 434 | [ 1.376451] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 435 | [ 1.381969] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| 436 | [ 1.387553] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 437 | [ 1.393092] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 438 | [ 1.398600] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| 439 | [ 1.404179] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 440 | [ 1.409721] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 441 | [ 1.415233] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| 442 | [ 1.420812] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 443 | [ 1.426335] pci 0000:01:04.0: Video device with shadowed ROM |
| 444 | [ 1.426345] PCI: CLS 64 bytes, default 64 |
| 445 | [ 1.426452] Unpacking initramfs... |
| 446 | [ 1.810090] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000) |
| 447 | [ 1.818010] PCI-DMA: Disabling AGP. |
| 448 | [ 1.823123] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| 449 | [ 1.828707] PCI-DMA: using GART IOMMU. |
| 450 | [ 1.832464] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| 451 | [ 1.844780] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| 452 | [ 1.852949] microcode: CPU0: patch_level=0x01000084 |
| 453 | [ 1.857841] microcode: CPU1: patch_level=0x01000084 |
| 454 | [ 1.862737] microcode: CPU2: patch_level=0x01000084 |
| 455 | [ 1.867638] microcode: CPU3: patch_level=0x01000084 |
| 456 | [ 1.872544] microcode: CPU4: patch_level=0x01000084 |
| 457 | [ 1.877441] microcode: CPU5: patch_level=0x01000084 |
| 458 | [ 1.882335] microcode: CPU6: patch_level=0x01000084 |
| 459 | [ 1.887232] microcode: CPU7: patch_level=0x01000084 |
| 460 | [ 1.892219] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| 461 | [ 1.901018] LVT offset 1 assigned for vector 0x400 |
| 462 | [ 1.905831] IBS: LVT offset 1 assigned |
| 463 | [ 1.909619] perf: AMD IBS detected (0x00000007) |
| 464 | [ 1.914780] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| 465 | [ 1.921163] audit: initializing netlink subsys (disabled) |
| 466 | [ 1.926589] audit: type=2000 audit(1457820528.652:1): initialized |
| 467 | [ 1.933458] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 468 | [ 1.939860] zbud: loaded |
| 469 | [ 1.942766] VFS: Disk quotas dquot_6.5.2 |
| 470 | [ 1.946738] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 471 | [ 1.953280] msgmni has been set to 9945 |
| 472 | [ 1.957668] alg: No test for stdrng (krng) |
| 473 | [ 1.961828] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| 474 | [ 1.969335] io scheduler noop registered |
| 475 | [ 1.973270] io scheduler deadline registered |
| 476 | [ 1.977623] io scheduler cfq registered (default) |
| 477 | [ 1.982549] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X |
| 478 | [ 1.982675] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X |
| 479 | [ 1.982799] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X |
| 480 | [ 1.982907] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X |
| 481 | [ 1.983060] aer 0000:00:0b.0:pcie02: service driver aer loaded |
| 482 | [ 1.983086] aer 0000:00:0c.0:pcie02: service driver aer loaded |
| 483 | [ 1.983109] aer 0000:00:0d.0:pcie02: service driver aer loaded |
| 484 | [ 1.983130] aer 0000:00:0e.0:pcie02: service driver aer loaded |
| 485 | [ 1.983153] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt |
| 486 | [ 1.990120] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| 487 | [ 1.996648] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded |
| 488 | [ 1.996658] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt |
| 489 | [ 2.003620] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| 490 | [ 2.010154] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded |
| 491 | [ 2.010163] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt |
| 492 | [ 2.017128] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded |
| 493 | [ 2.017137] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt |
| 494 | [ 2.024102] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded |
| 495 | [ 2.024134] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 496 | [ 2.029739] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 497 | [ 2.036446] GHES: HEST is not enabled! |
| 498 | [ 2.040341] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 499 | [ 2.066940] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| 500 | [ 2.094635] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| 501 | [ 2.102560] Linux agpgart interface v0.103 |
| 502 | [ 2.106877] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| 503 | [ 2.117428] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 504 | [ 2.122481] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 505 | [ 2.127775] mousedev: PS/2 mouse device common for all mice |
| 506 | [ 2.133451] rtc_cmos rtc_cmos: RTC can wake from S4 |
| 507 | [ 2.138580] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| 508 | [ 2.144974] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| 509 | [ 2.152831] ledtrig-cpu: registered to indicate activity on CPUs |
| 510 | [ 2.159024] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| 511 | [ 2.165468] AMD IOMMUv2 functionality not available on this system |
| 512 | [ 2.171797] TCP: cubic registered |
| 513 | [ 2.175265] NET: Registered protocol family 10 |
| 514 | [ 2.180166] mip6: Mobile IPv6 |
| 515 | [ 2.183163] NET: Registered protocol family 17 |
| 516 | [ 2.183633] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| 517 | [ 2.196227] mpls_gso: MPLS GSO support |
| 518 | [ 2.200839] registered taskstats version 1 |
| 519 | [ 2.205724] rtc_cmos rtc_cmos: setting system clock to 2016-03-12 22:08:50 UTC (1457820530) |
| 520 | [ 2.214152] PM: Hibernation image not present or could not be loaded. |
| 521 | [ 2.215968] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000) |
| 522 | [ 2.223803] Write protecting the kernel read-only data: 8192k |
| 523 | [ 2.233038] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000) |
| 524 | [ 2.241619] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| 525 | [ 2.275302] systemd-udevd[98]: starting version 215 |
| 526 | [ 2.281090] random: systemd-udevd urandom read with 4 bits of entropy available |
| 527 | [ 2.313436] ACPI: bus type USB registered |
| 528 | [ 2.317663] usbcore: registered new interface driver usbfs |
| 529 | [ 2.317784] pps_core: LinuxPPS API ver. 1 registered |
| 530 | [ 2.317786] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| 531 | [ 2.327211] FDC 0 is a post-1991 82077 |
| 532 | [ 2.341163] usbcore: registered new interface driver hub |
| 533 | [ 2.346786] SCSI subsystem initialized |
| 534 | [ 2.350865] PTP clock support registered |
| 535 | [ 2.351796] usbcore: registered new device driver usb |
| 536 | [ 2.361521] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 537 | [ 2.361720] libata version 3.00 loaded. |
| 538 | [ 2.368593] tg3.c:v3.137 (May 11, 2014) |
| 539 | [ 2.372478] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| 540 | [ 2.378395] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| 541 | [ 2.378472] ehci-pci: EHCI PCI platform driver |
| 542 | [ 2.389115] ehci-pci 0000:00:02.1: EHCI Host Controller |
| 543 | [ 2.394461] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| 544 | [ 2.401907] ehci-pci 0000:00:02.1: debug port 1 |
| 545 | [ 2.401985] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| 546 | [ 2.412717] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| 547 | [ 2.412755] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000 |
| 548 | [ 2.426868] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| 549 | [ 2.432696] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 550 | [ 2.439492] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 551 | [ 2.446717] usb usb1: Product: EHCI Host Controller |
| 552 | [ 2.451601] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| 553 | [ 2.457702] usb usb1: SerialNumber: 0000:00:02.1 |
| 554 | [ 2.462693] hub 1-0:1.0: USB hub found |
| 555 | [ 2.466454] hub 1-0:1.0: 10 ports detected |
| 556 | [ 2.471050] pata_amd 0000:00:06.0: version 0.4.1 |
| 557 | [ 2.471522] ohci-pci: OHCI PCI platform driver |
| 558 | [ 2.471938] scsi0 : pata_amd |
| 559 | [ 2.479132] scsi1 : pata_amd |
| 560 | [ 2.482154] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14 |
| 561 | [ 2.489119] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15 |
| 562 | [ 2.496202] sata_nv 0000:00:07.0: version 3.5 |
| 563 | [ 2.496592] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| 564 | [ 2.503272] scsi2 : sata_nv |
| 565 | [ 2.506308] scsi3 : sata_nv |
| 566 | [ 2.509227] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21 |
| 567 | [ 2.516366] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21 |
| 568 | [ 2.523945] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| 569 | [ 2.530437] scsi4 : sata_nv |
| 570 | [ 2.533460] scsi5 : sata_nv |
| 571 | [ 2.536378] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20 |
| 572 | [ 2.543518] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20 |
| 573 | [ 2.550965] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| 574 | [ 2.552746] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2 |
| 575 | [ 2.552749] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| 576 | [ 2.552751] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| 577 | [ 2.552753] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| 578 | [ 2.552918] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| 579 | [ 2.553079] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| 580 | [ 2.602474] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| 581 | [ 2.609928] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000 |
| 582 | [ 2.634810] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95 |
| 583 | [ 2.645078] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| 584 | [ 2.654820] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| 585 | [ 2.662650] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| 586 | [ 2.672568] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| 587 | [ 2.679363] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 588 | [ 2.686587] usb usb2: Product: OHCI PCI host controller |
| 589 | [ 2.691820] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| 590 | [ 2.697919] usb usb2: SerialNumber: 0000:00:02.0 |
| 591 | [ 2.702845] hub 2-0:1.0: USB hub found |
| 592 | [ 2.706623] hub 2-0:1.0: 10 ports detected |
| 593 | [ 2.731737] FS-Cache: Loaded |
| 594 | [ 2.739570] RPC: Registered named UNIX socket transport module. |
| 595 | [ 2.746627] RPC: Registered udp transport module. |
| 596 | [ 2.752709] RPC: Registered tcp transport module. |
| 597 | [ 2.758803] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| 598 | [ 2.772354] FS-Cache: Netfs 'nfs' registered for caching |
| 599 | [ 2.789713] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| 600 | [ 2.834481] ata3: SATA link down (SStatus 0 SControl 300) |
| 601 | [ 2.834562] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 602 | [ 2.842459] tsc: Refined TSC clocksource calibration: 1909.787 MHz |
| 603 | [ 2.858452] ata5: SATA link down (SStatus 0 SControl 300) |
| 604 | [ 3.162342] ata4: SATA link down (SStatus 0 SControl 300) |
| 605 | [ 3.478228] ata6: SATA link down (SStatus 0 SControl 300) |
| 606 | [ 3.842191] Switched to clocksource tsc |
| 607 | [ 4.495733] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex |
| 608 | [ 4.502263] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| 609 | [ 4.509147] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| 610 | [ 5.326489] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| 611 | [ 5.340197] systemd[1]: Detected architecture 'x86-64'. |
| 612 | [ 5.568310] systemd[1]: Inserted module 'autofs4' |
| 613 | [ 5.574393] systemd[1]: Set hostname to <cb-test-tgt>. |
| 614 | [ 5.648100] random: nonblocking pool is initialized |
| 615 | [ 5.809361] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| 616 | [ 5.822087] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| 617 | [ 5.837483] systemd[1]: Expecting device dev-ttyS0.device... |
| 618 | [ 5.853544] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| 619 | [ 5.861322] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| 620 | [ 5.868925] systemd[1]: Starting Remote File Systems (Pre). |
| 621 | [ 5.885455] systemd[1]: Reached target Remote File Systems (Pre). |
| 622 | [ 5.891586] systemd[1]: Starting Encrypted Volumes. |
| 623 | [ 5.905427] systemd[1]: Reached target Encrypted Volumes. |
| 624 | [ 5.910891] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| 625 | [ 5.933418] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| 626 | [ 5.942846] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| 627 | [ 5.950908] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| 628 | [ 5.958840] systemd[1]: Starting Paths. |
| 629 | [ 5.973402] systemd[1]: Reached target Paths. |
| 630 | [ 5.977796] systemd[1]: Starting Swap. |
| 631 | [ 5.989397] systemd[1]: Reached target Swap. |
| 632 | [ 5.993686] systemd[1]: Starting Root Slice. |
| 633 | [ 6.005396] systemd[1]: Created slice Root Slice. |
| 634 | [ 6.010121] systemd[1]: Starting User and Session Slice. |
| 635 | [ 6.025388] systemd[1]: Created slice User and Session Slice. |
| 636 | [ 6.031158] systemd[1]: Starting Delayed Shutdown Socket. |
| 637 | [ 6.045375] systemd[1]: Listening on Delayed Shutdown Socket. |
| 638 | [ 6.051168] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| 639 | [ 6.069372] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| 640 | [ 6.076353] systemd[1]: Starting Journal Socket (/dev/log). |
| 641 | [ 6.093451] systemd[1]: Listening on Journal Socket (/dev/log). |
| 642 | [ 6.099460] systemd[1]: Starting udev Kernel Socket. |
| 643 | [ 6.113364] systemd[1]: Listening on udev Kernel Socket. |
| 644 | [ 6.118715] systemd[1]: Starting udev Control Socket. |
| 645 | [ 6.133351] systemd[1]: Listening on udev Control Socket. |
| 646 | [ 6.138782] systemd[1]: Starting Journal Socket. |
| 647 | [ 6.153331] systemd[1]: Listening on Journal Socket. |
| 648 | [ 6.158328] systemd[1]: Starting System Slice. |
| 649 | [ 6.173325] systemd[1]: Created slice System Slice. |
| 650 | [ 6.178228] systemd[1]: Starting system-getty.slice. |
| 651 | [ 6.193333] systemd[1]: Created slice system-getty.slice. |
| 652 | [ 6.198764] systemd[1]: Starting system-serial\x2dgetty.slice. |
| 653 | [ 6.213334] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| 654 | [ 6.219653] systemd[1]: Starting Increase datagram queue length... |
| 655 | [ 6.238595] systemd[1]: Starting udev Coldplug all Devices... |
| 656 | [ 6.285053] systemd[1]: Starting Load Kernel Modules... |
| 657 | [ 6.493729] systemd[1]: Started Set Up Additional Binary Formats. |
| 658 | [ 6.499970] systemd[1]: Mounting Debug File System... |
| 659 | [ 6.514922] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| 660 | [ 6.538611] systemd[1]: Mounting POSIX Message Queue File System... |
| 661 | [ 6.558154] systemd[1]: Mounting Huge Pages File System... |
| 662 | [ 6.574244] systemd[1]: Starting Slices. |
| 663 | [ 6.589278] systemd[1]: Reached target Slices. |
| 664 | [ 6.593821] systemd[1]: Starting Remount Root and Kernel File Systems... |
| 665 | [ 6.621253] systemd[1]: Mounted Huge Pages File System. |
| 666 | [ 6.637239] systemd[1]: Mounted POSIX Message Queue File System. |
| 667 | [ 6.653172] systemd[1]: Mounted Debug File System. |
| 668 | [ 6.669163] systemd[1]: Started Increase datagram queue length. |
| 669 | [ 6.685184] systemd[1]: Started Load Kernel Modules. |
| 670 | [ 6.705194] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| 671 | [ 6.725222] systemd[1]: Started Remount Root and Kernel File Systems. |
| 672 | [ 6.741139] systemd[1]: Started udev Coldplug all Devices. |
| 673 | [ 6.786851] systemd[1]: Started Various fixups to make systemd work better on Debian. |
| 674 | [ 6.794714] systemd[1]: Starting Load/Save Random Seed... |
| 675 | [ 6.810992] systemd[1]: Starting Create Static Device Nodes in /dev... |
| 676 | [ 6.830704] systemd[1]: Starting Apply Kernel Variables... |
| 677 | [ 6.847300] systemd[1]: Mounted Configuration File System. |
| 678 | [ 6.853351] systemd[1]: Mounted FUSE Control File System. |
| 679 | [ 6.858853] systemd[1]: Starting Syslog Socket. |
| 680 | [ 6.873181] systemd[1]: Listening on Syslog Socket. |
| 681 | [ 6.878164] systemd[1]: Starting Sockets. |
| 682 | [ 6.893157] systemd[1]: Reached target Sockets. |
| 683 | [ 6.897765] systemd[1]: Starting Journal Service... |
| 684 | [ 6.925139] systemd[1]: Started Journal Service. |
| 685 | [ 7.058527] systemd-udevd[209]: starting version 215 |
| 686 | [ 7.326775] systemd-journald[208]: Received request to flush runtime journal from PID 1 |
| 687 | [ 7.817026] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| 688 | [ 7.825449] ACPI: Power Button [PWRB] |
| 689 | [ 7.829376] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| 690 | [ 7.836817] ACPI: Power Button [PWRF] |
| 691 | [ 7.841298] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| 692 | [ 7.849215] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled |
| 693 | [ 7.849560] EDAC MC: Ver: 3.0.0 |
| 694 | [ 7.860576] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| 695 | [ 7.882298] MCE: In-kernel MCE decoding enabled. |
| 696 | [ 7.887335] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| 697 | [ 7.894452] acpi-cpufreq: overriding BIOS provided _PSD data |
| 698 | [ 7.901156] i2c i2c-0: nForce2 SMBus adapter at 0x2c80 |
| 699 | [ 7.906447] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0 |
| 700 | [ 7.913426] AMD64 EDAC driver v3.4.0 |
| 701 | [ 7.917154] EDAC amd64: DRAM ECC enabled. |
| 702 | [ 7.921335] EDAC amd64: F10h detected (node 0). |
| 703 | [ 7.925912] EDAC MC: DCT0 chip selects: |
| 704 | [ 7.925915] EDAC amd64: MC: 0: 0MB 1: 0MB |
| 705 | [ 7.930626] EDAC amd64: MC: 2: 0MB 3: 0MB |
| 706 | [ 7.935334] EDAC amd64: MC: 4: 0MB 5: 0MB |
| 707 | [ 7.940048] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| 708 | [ 7.944760] EDAC MC: DCT1 chip selects: |
| 709 | [ 7.944762] EDAC amd64: MC: 0: 0MB 1: 0MB |
| 710 | [ 7.949474] EDAC amd64: MC: 2: 0MB 3: 0MB |
| 711 | [ 7.954186] EDAC amd64: MC: 4: 0MB 5: 0MB |
| 712 | [ 7.958890] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| 713 | [ 7.963593] EDAC amd64: using x4 syndromes. |
| 714 | [ 7.967778] EDAC amd64: MCT channel count: 2 |
| 715 | [ 7.972122] EDAC amd64: CS6: Registered DDR2 RAM |
| 716 | [ 7.976756] EDAC amd64: CS7: Registered DDR2 RAM |
| 717 | [ 7.982076] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT) |
| 718 | [ 7.992326] EDAC amd64: DRAM ECC enabled. |
| 719 | [ 7.996455] EDAC amd64: F10h detected (node 1). |
| 720 | [ 8.001042] EDAC MC: DCT0 chip selects: |
| 721 | [ 8.001047] EDAC amd64: MC: 0: 1024MB 1: 0MB |
| 722 | [ 8.005807] EDAC amd64: MC: 2: 0MB 3: 0MB |
| 723 | [ 8.010510] EDAC amd64: MC: 4: 0MB 5: 0MB |
| 724 | [ 8.015220] EDAC amd64: MC: 6: 0MB 7: 0MB |
| 725 | [ 8.019967] EDAC MC: DCT1 chip selects: |
| 726 | [ 8.019969] EDAC amd64: MC: 0: 0MB 1: 0MB |
| 727 | [ 8.024727] EDAC amd64: MC: 2: 0MB 3: 0MB |
| 728 | [ 8.029480] EDAC amd64: MC: 4: 0MB 5: 0MB |
| 729 | [ 8.034239] EDAC amd64: MC: 6: 0MB 7: 0MB |
| 730 | [ 8.038869] EDAC amd64: using x4 syndromes. |
| 731 | [ 8.043067] EDAC amd64: MCT channel count: 1 |
| 732 | [ 8.047419] EDAC amd64: CS0: Registered DDR2 RAM |
| 733 | [ 8.047537] kvm: Nested Virtualization enabled |
| 734 | [ 8.047549] kvm: Nested Paging enabled |
| 735 | [ 8.060728] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT) |
| 736 | [ 8.071510] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| 737 | [ 38.860470] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |