Gitiles
Code Review Sign In
review.coreboot.org / board-status / ec7365a0e0e6c6ecc19c27bb4db55f3c6d2f5348 / . / asus / kfsn4-dre / 4.2-566-g929b602 / 2015-12-10T23:20:08Z / kernel_log.txt
blob: b4b39118e8cd11f1fed15b9eb27092ea0e6c511b [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Standf36924b2015-12-11 00:11:23 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.2-566-g929b602-dirty 12/10/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1ae0-0x000f1aef] mapped at [ffff8800000f1ae0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1CB0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150619)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000EA6 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7880 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB78C0 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7990 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7AE0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7B10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B50 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
84[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
85[ 0.000000] NUMA: Initialized distance table, cnt=2
86[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
87[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
88[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
89[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
90[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
91[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
92[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
93[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
94[ 0.000000] Zone ranges:
95[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
96[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
97[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
98[ 0.000000] Movable zone start for each node
99[ 0.000000] Early memory node ranges
100[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
101[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
102[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
103[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
104[ 0.000000] On node 0 totalpages: 1048377
105[ 0.000000] DMA zone: 56 pages used for memmap
106[ 0.000000] DMA zone: 21 pages reserved
107[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
108[ 0.000000] DMA32 zone: 10695 pages used for memmap
109[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
110[ 0.000000] Normal zone: 3584 pages used for memmap
111[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
112[ 0.000000] On node 1 totalpages: 262144
113[ 0.000000] Normal zone: 3584 pages used for memmap
114[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
115[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
116[ 0.000000] ACPI: Local APIC address 0xfee00000
117[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
118[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
119[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
120[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
121[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
125[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
126[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
127[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
128[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
133[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
134[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
135[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
136[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
137[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
138[ 0.000000] ACPI: IRQ9 used by override.
139[ 0.000000] ACPI: IRQ14 used by override.
140[ 0.000000] ACPI: IRQ15 used by override.
141[ 0.000000] Using ACPI (MADT) for SMP configuration information
142[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
143[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
144[ 0.000000] nr_irqs_gsi: 40
145[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
146[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
147[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
148[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
149[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
150[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
151[ 0.000000] Booting paravirtualized kernel on bare hardware
152[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
153[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
154[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
155[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
156[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
157[ 0.000000] Policy zone: Normal
158[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
159[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
160[ 0.000000] AGP: Checking aperture...
161[ 0.000000] AGP: No AGP bridge found
162[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
163[ 0.000000] Aperture beyond 4GB. Ignoring.
164[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
165[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
166[ 0.000000] AGP: This costs you 64MB of RAM
167[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
168[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
169[ 0.000000] Memory: 5017500K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224584K reserved)
170[ 0.000000] Hierarchical RCU implementation.
171[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
172[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
173[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
174[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
175[ 0.000000] spurious 8259A interrupt: IRQ7.
176[ 0.000000] Console: colour VGA+ 80x25
177[ 0.000000] console [ttyS0] enabled
178[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
179[ 0.000000] hpet clockevent registered
180[ 0.000000] tsc: Fast TSC calibration using PIT
181[ 0.000000] tsc: Detected 1909.811 MHz processor
182[ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.62 BogoMIPS (lpj=7639244)
183[ 0.010795] pid_max: default: 32768 minimum: 301
184[ 0.015451] ACPI: Core revision 20140424
185[ 0.021834] ACPI: All ACPI Tables successfully acquired
186[ 0.027198] Security Framework initialized
187[ 0.031324] AppArmor: AppArmor disabled by boot time parameter
188[ 0.037159] Yama: disabled by default; enable with sysctl kernel.yama.*
189[ 0.044918] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
190[ 0.058070] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
191[ 0.067835] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
192[ 0.074740] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
193[ 0.082600] Initializing cgroup subsys memory
194[ 0.086977] Initializing cgroup subsys devices
195[ 0.091438] Initializing cgroup subsys freezer
196[ 0.095897] Initializing cgroup subsys net_cls
197[ 0.100361] Initializing cgroup subsys blkio
198[ 0.104646] Initializing cgroup subsys perf_event
199[ 0.109355] Initializing cgroup subsys net_prio
200[ 0.113935] tseg: 0000000000
201[ 0.113946] CPU: Physical Processor ID: 0
202[ 0.117975] CPU: Processor Core ID: 0
203[ 0.121663] mce: CPU supports 6 MCE banks
204[ 0.125693] LVT offset 0 assigned for vector 0xf9
205[ 0.130422] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
206Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
207tlb_flushall_shift: 6
208[ 0.145762] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
209[ 0.154771] ftrace: allocating 21601 entries in 85 pages
210[ 0.170180] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
211[ 0.215701] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
212[ 0.332510] Performance Events: AMD PMU driver.
213[ 0.337089] ... version: 0
214[ 0.341103] ... bit width: 48
215[ 0.345205] ... generic registers: 4
216[ 0.349221] ... value mask: 0000ffffffffffff
217[ 0.354522] ... max period: 00007fffffffffff
218[ 0.359841] ... fixed-purpose events: 0
219[ 0.363869] ... event mask: 000000000000000f
220[ 0.371801] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
221[ 0.380006] x86: Booting SMP configuration:
222[ 0.384197] .... node #0, CPUs: #1 #2 #3
223[ 0.428547] .... node #1, CPUs: #4 #5 #6 #7
224[ 0.581172] x86: Booted up 2 nodes, 8 CPUs
225[ 0.585474] smpboot: Total of 8 processors activated (30557.74 BogoMIPS)
226[ 0.597964] devtmpfs: initialized
227[ 0.609913] pinctrl core: initialized pinctrl subsystem
228[ 0.615309] NET: Registered protocol family 16
229[ 0.619977] cpuidle: using governor ladder
230[ 0.624074] cpuidle: using governor menu
231[ 0.628010] node 0 link 1: io port [1000, 3fff]
232[ 0.628013] TOM: 00000000c0000000 aka 3072M
233[ 0.632203] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
234[ 0.632207] node 0 link 1: mmio [fc000000, fc3fffff]
235[ 0.632211] node 0 link 1: mmio [f8000000, fbffffff]
236[ 0.632213] TOM2: 0000000180000000 aka 6144M
237[ 0.636492] bus: [bus 00-05] on node 0 link 1
238[ 0.636494] bus: 00 [io 0x0000-0xffff]
239[ 0.636496] bus: 00 [mem 0xd0000000-0xffffffff]
240[ 0.636498] bus: 00 [mem 0x180000000-0xfcffffffff]
241[ 0.636603] ACPI: bus type PCI registered
242[ 0.640618] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
243[ 0.647231] PCI: Using configuration type 1 for base access
244[ 0.652806] PCI: Using configuration type 1 for extended access
245[ 0.669324] ACPI: Added _OSI(Module Device)
246[ 0.673516] ACPI: Added _OSI(Processor Device)
247[ 0.677966] ACPI: Added _OSI(3.0 _SCP Extensions)
248[ 0.682677] ACPI: Added _OSI(Processor Aggregator Device)
249[ 0.691699] ACPI: Interpreter enabled
250[ 0.695383] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
251[ 0.704667] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
252[ 0.713939] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
253[ 0.723210] ACPI: (supports S0 S1 S5)
254[ 0.726881] ACPI: Using IOAPIC for interrupt routing
255[ 0.731898] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
256[ 0.760823] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
257[ 0.767018] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
258[ 0.775227] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
259[ 0.816756] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
260[ 0.826789] PCI host bridge to bus 0000:00
261[ 0.830898] pci_bus 0000:00: root bus resource [bus 00-05]
262[ 0.836388] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
263[ 0.842567] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
264[ 0.849444] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
265[ 0.856316] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
266[ 0.863195] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
267[ 0.869392] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
268[ 0.869589] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
269[ 0.869596] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
270[ 0.869735] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
271[ 0.869746] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
272[ 0.869769] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
273[ 0.869781] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
274[ 0.869814] pci 0000:00:01.1: PME# supported from D3hot D3cold
275[ 0.869918] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
276[ 0.869929] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
277[ 0.869965] pci 0000:00:02.0: supports D1 D2
278[ 0.869985] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
279[ 0.870044] pci 0000:00:02.0: System wakeup disabled by ACPI
280[ 0.875765] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
281[ 0.875774] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
282[ 0.875824] pci 0000:00:02.1: supports D1 D2
283[ 0.875834] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
284[ 0.875895] pci 0000:00:02.1: System wakeup disabled by ACPI
285[ 0.881628] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
286[ 0.881663] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
287[ 0.881683] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
288[ 0.888822] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
289[ 0.895354] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
290[ 0.902493] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
291[ 0.909138] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
292[ 0.909154] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
293[ 0.909159] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
294[ 0.909164] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
295[ 0.909168] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
296[ 0.909173] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
297[ 0.909178] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
298[ 0.909345] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
299[ 0.909356] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
300[ 0.909360] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
301[ 0.909365] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
302[ 0.909370] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
303[ 0.909374] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
304[ 0.909379] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
305[ 0.909541] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
306[ 0.909673] pci 0000:00:09.0: System wakeup disabled by ACPI
307[ 0.915392] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
308[ 0.915442] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
309[ 0.915492] pci 0000:00:0b.0: System wakeup disabled by ACPI
310[ 0.921216] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
311[ 0.921271] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
312[ 0.921340] pci 0000:00:0c.0: System wakeup disabled by ACPI
313[ 0.927060] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
314[ 0.927110] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
315[ 0.927166] pci 0000:00:0d.0: System wakeup disabled by ACPI
316[ 0.932885] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
317[ 0.932925] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
318[ 0.932986] pci 0000:00:0e.0: System wakeup disabled by ACPI
319[ 0.938714] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
320[ 0.938856] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
321[ 0.938987] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
322[ 0.939111] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
323[ 0.939247] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
324[ 0.939367] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
325[ 0.939512] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
326[ 0.939643] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
327[ 0.939770] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
328[ 0.939917] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
329[ 0.940106] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
330[ 0.940126] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
331[ 0.940135] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
332[ 0.940142] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
333[ 0.940202] pci 0000:01:04.0: supports D1 D2
334[ 0.940289] pci 0000:00:09.0: PCI bridge to [bus 01]
335[ 0.945267] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
336[ 0.945270] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
337[ 0.945273] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
338[ 0.945389] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
339[ 0.945424] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
340[ 0.945460] pci 0000:02:00.0: reg 0x30: [mem 0x7be00000-0x7be0ffff pref]
341[ 0.945540] pci 0000:02:00.0: PME# supported from D3hot D3cold
342[ 0.945637] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
343[ 0.955643] pci 0000:00:0b.0: PCI bridge to [bus 02]
344[ 0.960611] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
345[ 0.960721] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.960757] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
347[ 0.960858] pci 0000:03:00.0: PME# supported from D3hot D3cold
348[ 0.960957] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
349[ 0.970959] pci 0000:00:0c.0: PCI bridge to [bus 03]
350[ 0.975928] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
351[ 0.975989] pci 0000:00:0d.0: PCI bridge to [bus 04]
352[ 0.981034] pci 0000:00:0e.0: PCI bridge to [bus 05]
353[ 0.986020] pci_bus 0000:00: on NUMA node 0
354[ 0.986119] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
355[ 0.992279] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
356[ 0.998423] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
357[ 1.005754] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
358[ 1.013058] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
359[ 1.020372] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
360[ 1.027666] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
361[ 1.033821] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
362[ 1.039961] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
363[ 1.047260] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
364[ 1.054547] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
365[ 1.061847] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
366[ 1.067991] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
367[ 1.074179] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
368[ 1.081494] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
369[ 1.088815] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
370[ 1.096132] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
371[ 1.104654] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
372[ 1.111118] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
373[ 1.117599] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
374[ 1.124073] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
375[ 1.130809] ACPI: Enabled 1 GPEs in block 00 to 1F
376[ 1.135926] vgaarb: setting as boot device: PCI:0000:01:04.0
377[ 1.141593] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
378[ 1.149688] vgaarb: loaded
379[ 1.152405] vgaarb: bridge control possible 0000:01:04.0
380[ 1.157890] PCI: Using ACPI for IRQ routing
381[ 1.162087] PCI: pci_cache_line_size set to 64 bytes
382[ 1.162145] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
383[ 1.162148] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
384[ 1.162468] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
385[ 1.169518] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
386[ 1.174573] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
387[ 1.183258] Switched to clocksource hpet
388[ 1.198863] pnp: PnP ACPI init
389[ 1.201980] ACPI: bus type PNP registered
390[ 1.206547] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
391[ 1.206627] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
392[ 1.206725] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
393[ 1.206803] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
394[ 1.206843] pnp 00:04: [dma 2]
395[ 1.206886] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
396[ 1.206908] pnp: PnP ACPI: found 5 devices
397[ 1.211019] ACPI: bus type PNP unregistered
398[ 1.223057] pci 0000:02:00.0: can't claim BAR 6 [mem 0x7be00000-0x7be0ffff pref]: no compatible bridge window
399[ 1.233012] pci 0000:00:09.0: PCI bridge to [bus 01]
400[ 1.237989] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
401[ 1.244090] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
402[ 1.250878] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
403[ 1.258113] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
404[ 1.265339] pci 0000:00:0b.0: PCI bridge to [bus 02]
405[ 1.270312] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
406[ 1.277107] pci 0000:00:0c.0: PCI bridge to [bus 03]
407[ 1.282077] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
408[ 1.288872] pci 0000:00:0d.0: PCI bridge to [bus 04]
409[ 1.293844] pci 0000:00:0e.0: PCI bridge to [bus 05]
410[ 1.298818] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
411[ 1.298821] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
412[ 1.298824] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
413[ 1.298826] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
414[ 1.298829] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
415[ 1.298832] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
416[ 1.298835] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
417[ 1.298837] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
418[ 1.298840] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
419[ 1.298843] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
420[ 1.298977] NET: Registered protocol family 2
421[ 1.303878] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
422[ 1.311565] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
423[ 1.318901] TCP: Hash tables configured (established 65536 bind 65536)
424[ 1.325509] TCP: reno registered
425[ 1.328765] UDP hash table entries: 4096 (order: 5, 131072 bytes)
426[ 1.334976] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
427[ 1.341772] NET: Registered protocol family 1
428[ 1.346521] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
429[ 1.352603] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
430[ 1.358509] pci 0000:00:00.0: Found enabled HT MSI Mapping
431[ 1.364053] pci 0000:00:00.0: Found enabled HT MSI Mapping
432[ 1.369547] pci 0000:00:0b.0: Found disabled HT MSI Mapping
433[ 1.375132] pci 0000:00:00.0: Found enabled HT MSI Mapping
434[ 1.380675] pci 0000:00:00.0: Found enabled HT MSI Mapping
435[ 1.386178] pci 0000:00:0c.0: Found disabled HT MSI Mapping
436[ 1.391765] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.397301] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.402813] pci 0000:00:0d.0: Found disabled HT MSI Mapping
439[ 1.408399] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.413939] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.419441] pci 0000:00:0e.0: Found disabled HT MSI Mapping
442[ 1.425024] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.430549] pci 0000:01:04.0: Video device with shadowed ROM
444[ 1.430557] PCI: CLS 64 bytes, default 64
445[ 1.430666] Unpacking initramfs...
446[ 1.663447] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
447[ 1.671321] PCI-DMA: Disabling AGP.
448[ 1.676408] PCI-DMA: aperture base @ b4000000 size 65536 KB
449[ 1.681996] PCI-DMA: using GART IOMMU.
450[ 1.685754] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
451[ 1.697787] platform rtc_cmos: registered platform RTC device (no PNP device found)
452[ 1.705974] microcode: CPU0: patch_level=0x01000084
453[ 1.710862] microcode: CPU1: patch_level=0x01000084
454[ 1.715757] microcode: CPU2: patch_level=0x01000084
455[ 1.720658] microcode: CPU3: patch_level=0x01000084
456[ 1.725563] microcode: CPU4: patch_level=0x01000084
457[ 1.730454] microcode: CPU5: patch_level=0x01000084
458[ 1.735347] microcode: CPU6: patch_level=0x01000084
459[ 1.740245] microcode: CPU7: patch_level=0x01000084
460[ 1.745229] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
461[ 1.754029] LVT offset 1 assigned for vector 0x400
462[ 1.758842] IBS: LVT offset 1 assigned
463[ 1.762630] perf: AMD IBS detected (0x00000007)
464[ 1.767778] futex hash table entries: 2048 (order: 5, 131072 bytes)
465[ 1.774169] audit: initializing netlink subsys (disabled)
466[ 1.779595] audit: type=2000 audit(1449792570.512:1): initialized
467[ 1.786475] HugeTLB registered 2 MB page size, pre-allocated 0 pages
468[ 1.792882] zbud: loaded
469[ 1.795781] VFS: Disk quotas dquot_6.5.2
470[ 1.799751] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
471[ 1.806296] msgmni has been set to 9945
472[ 1.810686] alg: No test for stdrng (krng)
473[ 1.814857] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
474[ 1.822356] io scheduler noop registered
475[ 1.826288] io scheduler deadline registered
476[ 1.830650] io scheduler cfq registered (default)
477[ 1.835576] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
478[ 1.835700] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
479[ 1.835829] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
480[ 1.835954] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
481[ 1.836113] aer 0000:00:0b.0:pcie02: service driver aer loaded
482[ 1.836142] aer 0000:00:0c.0:pcie02: service driver aer loaded
483[ 1.836168] aer 0000:00:0d.0:pcie02: service driver aer loaded
484[ 1.836194] aer 0000:00:0e.0:pcie02: service driver aer loaded
485[ 1.836214] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
486[ 1.843185] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
487[ 1.849713] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
488[ 1.849724] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
489[ 1.856686] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
490[ 1.863219] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
491[ 1.863229] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
492[ 1.870194] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
493[ 1.870204] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
494[ 1.877166] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
495[ 1.877195] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
496[ 1.882802] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
497[ 1.889539] GHES: HEST is not enabled!
498[ 1.893427] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
499[ 1.920018] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
500[ 1.947701] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
501[ 1.955619] Linux agpgart interface v0.103
502[ 1.959935] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
503[ 1.970431] serio: i8042 KBD port at 0x60,0x64 irq 1
504[ 1.975422] serio: i8042 AUX port at 0x60,0x64 irq 12
505[ 1.980708] mousedev: PS/2 mouse device common for all mice
506[ 1.986379] rtc_cmos rtc_cmos: RTC can wake from S4
507[ 1.991501] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
508[ 1.997900] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
509[ 2.005760] ledtrig-cpu: registered to indicate activity on CPUs
510[ 2.012049] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
511[ 2.018502] AMD IOMMUv2 functionality not available on this system
512[ 2.024869] TCP: cubic registered
513[ 2.028342] NET: Registered protocol family 10
514[ 2.033168] mip6: Mobile IPv6
515[ 2.034484] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
516[ 2.044756] NET: Registered protocol family 17
517[ 2.049215] mpls_gso: MPLS GSO support
518[ 2.053819] registered taskstats version 1
519[ 2.058681] rtc_cmos rtc_cmos: setting system clock to 2015-12-11 00:09:31 UTC (1449792571)
520[ 2.067102] PM: Hibernation image not present or could not be loaded.
521[ 2.068927] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
522[ 2.076783] Write protecting the kernel read-only data: 8192k
523[ 2.086025] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
524[ 2.094632] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
525[ 2.118560] systemd-udevd[99]: starting version 215
526[ 2.124344] random: systemd-udevd urandom read with 4 bits of entropy available
527[ 2.155800] pps_core: LinuxPPS API ver. 1 registered
528[ 2.160785] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
529[ 2.170328] ACPI: bus type USB registered
530[ 2.174555] usbcore: registered new interface driver usbfs
531[ 2.174603] PTP clock support registered
532[ 2.184094] usbcore: registered new interface driver hub
533[ 2.189655] usbcore: registered new device driver usb
534[ 2.189742] tg3.c:v3.137 (May 11, 2014)
535[ 2.189755] tg3 0000:02:00.0: enabling device (0004 -> 0006)
536[ 2.189963] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
537[ 2.210971] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
538[ 2.218070] ehci-pci: EHCI PCI platform driver
539[ 2.222800] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
540[ 2.222856] ehci-pci 0000:00:02.1: EHCI Host Controller
541[ 2.222872] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
542[ 2.222910] ehci-pci 0000:00:02.1: debug port 1
543[ 2.222957] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
544[ 2.222985] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
545[ 2.234944] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
546[ 2.235006] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
547[ 2.235008] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
548[ 2.235009] usb usb1: Product: EHCI Host Controller
549[ 2.235011] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
550[ 2.235012] usb usb1: SerialNumber: 0000:00:02.1
551[ 2.235316] hub 1-0:1.0: USB hub found
552[ 2.235326] hub 1-0:1.0: 10 ports detected
553[ 2.295757] ohci-pci: OHCI PCI platform driver
554[ 2.300461] ohci-pci 0000:00:02.0: OHCI PCI host controller
555[ 2.306057] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
556[ 2.313506] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
557[ 2.326047] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
558[ 2.336310] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
559[ 2.346044] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
560[ 2.353877] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
561[ 2.360683] tg3 0000:03:00.0: enabling device (0004 -> 0006)
562[ 2.366510] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
563[ 2.376920] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
564[ 2.383717] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
565[ 2.390939] usb usb2: Product: OHCI PCI host controller
566[ 2.396172] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
567[ 2.402270] usb usb2: SerialNumber: 0000:00:02.0
568[ 2.407143] hub 2-0:1.0: USB hub found
569[ 2.410913] hub 2-0:1.0: 10 ports detected
570[ 2.455430] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
571[ 2.465692] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
572[ 2.475430] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
573[ 2.483259] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
574[ 2.496549] FS-Cache: Loaded
575[ 2.503704] RPC: Registered named UNIX socket transport module.
576[ 2.510252] RPC: Registered udp transport module.
577[ 2.516346] RPC: Registered tcp transport module.
578[ 2.522437] RPC: Registered tcp NFSv4.1 backchannel transport module.
579[ 2.534989] FS-Cache: Netfs 'nfs' registered for caching
580[ 2.548673] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
581[ 2.594903] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
582[ 2.694752] tsc: Refined TSC clocksource calibration: 1909.786 MHz
583[ 3.698487] Switched to clocksource tsc
584[ 4.338533] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
585[ 4.345060] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
586[ 4.351945] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
587[ 5.051369] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
588[ 5.065075] systemd[1]: Detected architecture 'x86-64'.
589[ 5.286208] systemd[1]: Inserted module 'autofs4'
590[ 5.292200] systemd[1]: Set hostname to <cb-test-tgt>.
591[ 5.369606] random: nonblocking pool is initialized
592[ 5.532840] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
593[ 5.545567] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
594[ 5.560956] systemd[1]: Expecting device dev-ttyS0.device...
595[ 5.573893] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
596[ 5.581672] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
597[ 5.589278] systemd[1]: Starting Remote File Systems (Pre).
598[ 5.605876] systemd[1]: Reached target Remote File Systems (Pre).
599[ 5.612063] systemd[1]: Starting Encrypted Volumes.
600[ 5.625777] systemd[1]: Reached target Encrypted Volumes.
601[ 5.631245] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
602[ 5.653791] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
603[ 5.663220] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
604[ 5.671281] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
605[ 5.679213] systemd[1]: Starting Paths.
606[ 5.693755] systemd[1]: Reached target Paths.
607[ 5.698158] systemd[1]: Starting Swap.
608[ 5.709751] systemd[1]: Reached target Swap.
609[ 5.714047] systemd[1]: Starting Root Slice.
610[ 5.725739] systemd[1]: Created slice Root Slice.
611[ 5.730478] systemd[1]: Starting User and Session Slice.
612[ 5.745745] systemd[1]: Created slice User and Session Slice.
613[ 5.751520] systemd[1]: Starting Delayed Shutdown Socket.
614[ 5.765735] systemd[1]: Listening on Delayed Shutdown Socket.
615[ 5.771513] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
616[ 5.789725] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
617[ 5.796711] systemd[1]: Starting Journal Socket (/dev/log).
618[ 5.813706] systemd[1]: Listening on Journal Socket (/dev/log).
619[ 5.819658] systemd[1]: Starting udev Kernel Socket.
620[ 5.833710] systemd[1]: Listening on udev Kernel Socket.
621[ 5.839062] systemd[1]: Starting udev Control Socket.
622[ 5.853710] systemd[1]: Listening on udev Control Socket.
623[ 5.859154] systemd[1]: Starting Journal Socket.
624[ 5.873685] systemd[1]: Listening on Journal Socket.
625[ 5.878691] systemd[1]: Starting System Slice.
626[ 5.893674] systemd[1]: Created slice System Slice.
627[ 5.898575] systemd[1]: Starting system-getty.slice.
628[ 5.913678] systemd[1]: Created slice system-getty.slice.
629[ 5.919101] systemd[1]: Starting system-serial\x2dgetty.slice.
630[ 5.933677] systemd[1]: Created slice system-serial\x2dgetty.slice.
631[ 5.939996] systemd[1]: Starting Increase datagram queue length...
632[ 5.958447] systemd[1]: Starting udev Coldplug all Devices...
633[ 6.181725] systemd[1]: Starting Load Kernel Modules...
634[ 6.206889] systemd[1]: Started Set Up Additional Binary Formats.
635[ 6.213222] systemd[1]: Mounting Debug File System...
636[ 6.227498] systemd[1]: Starting Create list of required static device nodes for the current kernel...
637[ 6.251481] systemd[1]: Mounting POSIX Message Queue File System...
638[ 6.270603] systemd[1]: Mounting Huge Pages File System...
639[ 6.286353] systemd[1]: Starting Slices.
640[ 6.297635] systemd[1]: Reached target Slices.
641[ 6.302204] systemd[1]: Starting Remount Root and Kernel File Systems...
642[ 6.329610] systemd[1]: Mounted Huge Pages File System.
643[ 6.345532] systemd[1]: Mounted POSIX Message Queue File System.
644[ 6.361570] systemd[1]: Mounted Debug File System.
645[ 6.377539] systemd[1]: Started Increase datagram queue length.
646[ 6.393568] systemd[1]: Started Load Kernel Modules.
647[ 6.413584] systemd[1]: Started Create list of required static device nodes for the current kernel.
648[ 6.437571] systemd[1]: Started Remount Root and Kernel File Systems.
649[ 6.453518] systemd[1]: Started udev Coldplug all Devices.
650[ 6.499197] systemd[1]: Started Various fixups to make systemd work better on Debian.
651[ 6.507071] systemd[1]: Starting Load/Save Random Seed...
652[ 6.523084] systemd[1]: Starting Create Static Device Nodes in /dev...
653[ 6.539048] systemd[1]: Starting Apply Kernel Variables...
654[ 6.555364] systemd[1]: Mounted Configuration File System.
655[ 6.561049] systemd[1]: Mounted FUSE Control File System.
656[ 6.566509] systemd[1]: Starting Syslog Socket.
657[ 6.581505] systemd[1]: Listening on Syslog Socket.
658[ 6.586506] systemd[1]: Starting Sockets.
659[ 6.601497] systemd[1]: Reached target Sockets.
660[ 6.606194] systemd[1]: Starting Journal Service...
661[ 6.633520] systemd[1]: Started Journal Service.
662[ 6.767277] systemd-udevd[191]: starting version 215
663[ 7.034166] systemd-journald[189]: Received request to flush runtime journal from PID 1
664[ 7.477195] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
665[ 7.484539] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
666[ 7.492352] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
667[ 7.500611] EDAC MC: Ver: 3.0.0
668[ 7.533818] SCSI subsystem initialized
669[ 7.590883] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
670[ 7.599275] ACPI: Power Button [PWRB]
671[ 7.603227] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
672[ 7.610677] ACPI: Power Button [PWRF]
673[ 7.614617] MCE: In-kernel MCE decoding enabled.
674[ 7.620997] FDC 0 is a post-1991 82077
675[ 7.639440] libata version 3.00 loaded.
676[ 7.639608] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
677[ 7.644943] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
678[ 7.645202] acpi-cpufreq: overriding BIOS provided _PSD data
679[ 7.656232] AMD64 EDAC driver v3.4.0
680[ 7.660152] EDAC amd64: DRAM ECC enabled.
681[ 7.664233] EDAC amd64: F10h detected (node 0).
682[ 7.668845] EDAC MC: DCT0 chip selects:
683[ 7.668847] EDAC amd64: MC: 0: 0MB 1: 0MB
684[ 7.673579] EDAC amd64: MC: 2: 0MB 3: 0MB
685[ 7.678311] EDAC amd64: MC: 4: 0MB 5: 0MB
686[ 7.683037] EDAC amd64: MC: 6: 1024MB 7: 1024MB
687[ 7.687768] EDAC MC: DCT1 chip selects:
688[ 7.687780] EDAC amd64: MC: 0: 0MB 1: 0MB
689[ 7.692510] EDAC amd64: MC: 2: 0MB 3: 0MB
690[ 7.697237] EDAC amd64: MC: 4: 0MB 5: 0MB
691[ 7.701973] EDAC amd64: MC: 6: 1024MB 7: 1024MB
692[ 7.706704] EDAC amd64: using x4 syndromes.
693[ 7.710934] EDAC amd64: MCT channel count: 2
694[ 7.711270] input: PC Speaker as /devices/platform/pcspkr/input/input4
695[ 7.721827] EDAC amd64: CS6: Registered DDR2 RAM
696[ 7.726470] EDAC amd64: CS7: Registered DDR2 RAM
697[ 7.731425] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
698[ 7.741965] pata_amd 0000:00:06.0: version 0.4.1
699[ 7.742799] scsi0 : pata_amd
700[ 7.746727] scsi1 : pata_amd
701[ 7.749697] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
702[ 7.756696] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
703[ 7.763894] sata_nv 0000:00:07.0: version 3.5
704[ 7.764221] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
705[ 7.771099] scsi2 : sata_nv
706[ 7.774654] kvm: Nested Virtualization enabled
707[ 7.774703] scsi3 : sata_nv
708[ 7.774837] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
709[ 7.774840] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
710[ 7.775110] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
711[ 7.775624] scsi4 : sata_nv
712[ 7.775779] scsi5 : sata_nv
713[ 7.775845] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
714[ 7.775846] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
715[ 7.775938] EDAC amd64: DRAM ECC enabled.
716[ 7.775957] EDAC amd64: F10h detected (node 1).
717[ 7.776007] EDAC MC: DCT0 chip selects:
718[ 7.776010] EDAC amd64: MC: 0: 1024MB 1: 0MB
719[ 7.776011] EDAC amd64: MC: 2: 0MB 3: 0MB
720[ 7.776012] EDAC amd64: MC: 4: 0MB 5: 0MB
721[ 7.776013] EDAC amd64: MC: 6: 0MB 7: 0MB
722[ 7.776015] EDAC MC: DCT1 chip selects:
723[ 7.776016] EDAC amd64: MC: 0: 0MB 1: 0MB
724[ 7.776017] EDAC amd64: MC: 2: 0MB 3: 0MB
725[ 7.776018] EDAC amd64: MC: 4: 0MB 5: 0MB
726[ 7.776019] EDAC amd64: MC: 6: 0MB 7: 0MB
727[ 7.776020] EDAC amd64: using x4 syndromes.
728[ 7.776021] EDAC amd64: MCT channel count: 1
729[ 7.776066] EDAC amd64: CS0: Registered DDR2 RAM
730[ 7.776348] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
731[ 7.776489] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
732[ 7.901506] kvm: Nested Paging enabled
733[ 8.084897] ata3: SATA link down (SStatus 0 SControl 300)
734[ 8.084919] ata5: SATA link down (SStatus 0 SControl 300)
735[ 8.404775] ata4: SATA link down (SStatus 0 SControl 300)
736[ 8.720692] ata6: SATA link down (SStatus 0 SControl 300)
737[ 38.697053] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****