Gitiles
Code Review Sign In
review.coreboot.org / board-status / ec7365a0e0e6c6ecc19c27bb4db55f3c6d2f5348 / . / asus / kfsn4-dre / 4.2-386-gf5fd4c9 / 2015-11-24T20:01:25Z / kernel_log.txt
blob: 56344cc30cbc289cf068d403e884940cb507e81c [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand61758482015-11-24 20:09:57 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.2-386-gf5fd4c9-dirty 11/24/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F4000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000EA6 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7880 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB78C0 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7990 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7AE0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7B10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B50 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
84[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
85[ 0.000000] NUMA: Initialized distance table, cnt=2
86[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
87[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
88[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
89[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
90[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
91[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
92[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
93[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
94[ 0.000000] Zone ranges:
95[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
96[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
97[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
98[ 0.000000] Movable zone start for each node
99[ 0.000000] Early memory node ranges
100[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
101[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
102[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
103[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
104[ 0.000000] On node 0 totalpages: 1048377
105[ 0.000000] DMA zone: 56 pages used for memmap
106[ 0.000000] DMA zone: 21 pages reserved
107[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
108[ 0.000000] DMA32 zone: 10695 pages used for memmap
109[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
110[ 0.000000] Normal zone: 3584 pages used for memmap
111[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
112[ 0.000000] On node 1 totalpages: 262144
113[ 0.000000] Normal zone: 3584 pages used for memmap
114[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
115[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
116[ 0.000000] ACPI: Local APIC address 0xfee00000
117[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
118[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
119[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
120[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
121[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
125[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
126[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
127[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
128[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
133[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
134[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
135[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
136[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
137[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
138[ 0.000000] ACPI: IRQ9 used by override.
139[ 0.000000] ACPI: IRQ14 used by override.
140[ 0.000000] ACPI: IRQ15 used by override.
141[ 0.000000] Using ACPI (MADT) for SMP configuration information
142[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
143[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
144[ 0.000000] nr_irqs_gsi: 40
145[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
146[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
147[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
148[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
149[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
150[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
151[ 0.000000] Booting paravirtualized kernel on bare hardware
152[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
153[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
154[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
155[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
156[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
157[ 0.000000] Policy zone: Normal
158[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
159[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
160[ 0.000000] AGP: Checking aperture...
161[ 0.000000] AGP: No AGP bridge found
162[ 0.000000] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
163[ 0.000000] AGP: Node 1: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
164[ 0.000000] Memory: 5083036K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 159048K reserved)
165[ 0.000000] Hierarchical RCU implementation.
166[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
167[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
168[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
169[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
170[ 0.000000] spurious 8259A interrupt: IRQ7.
171[ 0.000000] Console: colour VGA+ 80x25
172[ 0.000000] console [ttyS0] enabled
173[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
174[ 0.000000] hpet clockevent registered
175[ 0.000000] tsc: Fast TSC calibration using PIT
176[ 0.000000] tsc: Detected 1909.851 MHz processor
177[ 0.000157] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.70 BogoMIPS (lpj=7639404)
178[ 0.010794] pid_max: default: 32768 minimum: 301
179[ 0.015450] ACPI: Core revision 20140424
180[ 0.021809] ACPI: All ACPI Tables successfully acquired
181[ 0.027163] Security Framework initialized
182[ 0.031289] AppArmor: AppArmor disabled by boot time parameter
183[ 0.037124] Yama: disabled by default; enable with sysctl kernel.yama.*
184[ 0.044848] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
185[ 0.058060] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
186[ 0.067794] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
187[ 0.074692] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
188[ 0.082547] Initializing cgroup subsys memory
189[ 0.086924] Initializing cgroup subsys devices
190[ 0.091394] Initializing cgroup subsys freezer
191[ 0.095864] Initializing cgroup subsys net_cls
192[ 0.100325] Initializing cgroup subsys blkio
193[ 0.104619] Initializing cgroup subsys perf_event
194[ 0.109328] Initializing cgroup subsys net_prio
195[ 0.113908] tseg: 0000000000
196[ 0.113920] CPU: Physical Processor ID: 0
197[ 0.117947] CPU: Processor Core ID: 0
198[ 0.121620] mce: CPU supports 6 MCE banks
199[ 0.125647] LVT offset 0 assigned for vector 0xf9
200[ 0.130378] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
201Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
202tlb_flushall_shift: 6
203[ 0.145717] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
204[ 0.154724] ftrace: allocating 21601 entries in 85 pages
205[ 0.170111] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
206[ 0.215631] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
207[ 0.332512] Performance Events: AMD PMU driver.
208[ 0.337081] ... version: 0
209[ 0.341093] ... bit width: 48
210[ 0.345191] ... generic registers: 4
211[ 0.349203] ... value mask: 0000ffffffffffff
212[ 0.354503] ... max period: 00007fffffffffff
213[ 0.359832] ... fixed-purpose events: 0
214[ 0.363844] ... event mask: 000000000000000f
215[ 0.371767] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
216[ 0.379967] x86: Booting SMP configuration:
217[ 0.384157] .... node #0, CPUs: #1 #2 #3
218[ 0.428504] .... node #1, CPUs: #4 #5 #6 #7
219[ 0.581229] x86: Booted up 2 nodes, 8 CPUs
220[ 0.585532] smpboot: Total of 8 processors activated (30558.04 BogoMIPS)
221[ 0.598036] devtmpfs: initialized
222[ 0.609969] pinctrl core: initialized pinctrl subsystem
223[ 0.615366] NET: Registered protocol family 16
224[ 0.620025] cpuidle: using governor ladder
225[ 0.624130] cpuidle: using governor menu
226[ 0.628068] node 0 link 1: io port [1000, 3fff]
227[ 0.628072] TOM: 00000000c0000000 aka 3072M
228[ 0.632265] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
229[ 0.632269] node 0 link 1: mmio [fc000000, fc3fffff]
230[ 0.632272] node 0 link 1: mmio [f4000000, f7ffffff]
231[ 0.632275] TOM2: 0000000180000000 aka 6144M
232[ 0.636552] bus: [bus 00-05] on node 0 link 1
233[ 0.636554] bus: 00 [io 0x0000-0xffff]
234[ 0.636556] bus: 00 [mem 0xf8000000-0xffffffff]
235[ 0.636558] bus: 00 [mem 0xd0000000-0xf7ffffff]
236[ 0.636559] bus: 00 [mem 0x180000000-0xfcffffffff]
237[ 0.636665] ACPI: bus type PCI registered
238[ 0.640685] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
239[ 0.647298] PCI: Using configuration type 1 for base access
240[ 0.652874] PCI: Using configuration type 1 for extended access
241[ 0.669327] ACPI: Added _OSI(Module Device)
242[ 0.673524] ACPI: Added _OSI(Processor Device)
243[ 0.677974] ACPI: Added _OSI(3.0 _SCP Extensions)
244[ 0.682684] ACPI: Added _OSI(Processor Aggregator Device)
245[ 0.691711] ACPI: Interpreter enabled
246[ 0.695391] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
247[ 0.704656] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
248[ 0.713920] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
249[ 0.723207] ACPI: (supports S0 S1 S5)
250[ 0.726878] ACPI: Using IOAPIC for interrupt routing
251[ 0.731890] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
252[ 0.759477] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
253[ 0.765664] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
254[ 0.773880] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
255[ 0.811746] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
256[ 0.821760] PCI host bridge to bus 0000:00
257[ 0.825864] pci_bus 0000:00: root bus resource [bus 00-05]
258[ 0.831355] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
259[ 0.837540] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
260[ 0.844418] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xf7ffffff]
261[ 0.851290] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
262[ 0.858168] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
263[ 0.864367] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
264[ 0.864552] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
265[ 0.864559] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
266[ 0.864691] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
267[ 0.864701] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
268[ 0.864721] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
269[ 0.864740] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
270[ 0.864787] pci 0000:00:01.1: PME# supported from D3hot D3cold
271[ 0.864895] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
272[ 0.864909] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
273[ 0.864945] pci 0000:00:02.0: supports D1 D2
274[ 0.864956] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
275[ 0.865038] pci 0000:00:02.0: System wakeup disabled by ACPI
276[ 0.870755] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
277[ 0.870764] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
278[ 0.870814] pci 0000:00:02.1: supports D1 D2
279[ 0.870824] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
280[ 0.870872] pci 0000:00:02.1: System wakeup disabled by ACPI
281[ 0.876599] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
282[ 0.876626] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
283[ 0.876651] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
284[ 0.883788] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
285[ 0.890320] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
286[ 0.897458] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
287[ 0.904086] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
288[ 0.904096] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
289[ 0.904101] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
290[ 0.904105] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
291[ 0.904110] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
292[ 0.904115] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
293[ 0.904120] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
294[ 0.904276] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
295[ 0.904284] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
296[ 0.904289] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
297[ 0.904294] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
298[ 0.904298] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
299[ 0.904303] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
300[ 0.904308] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
301[ 0.904453] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
302[ 0.904536] pci 0000:00:09.0: System wakeup disabled by ACPI
303[ 0.910254] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
304[ 0.910303] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
305[ 0.910356] pci 0000:00:0b.0: System wakeup disabled by ACPI
306[ 0.916074] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
307[ 0.916130] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
308[ 0.916179] pci 0000:00:0c.0: System wakeup disabled by ACPI
309[ 0.921901] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
310[ 0.921951] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
311[ 0.922004] pci 0000:00:0d.0: System wakeup disabled by ACPI
312[ 0.927725] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
313[ 0.927775] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
314[ 0.927823] pci 0000:00:0e.0: System wakeup disabled by ACPI
315[ 0.933549] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
316[ 0.933693] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
317[ 0.933892] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
318[ 0.934024] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
319[ 0.934146] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
320[ 0.934264] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
321[ 0.934435] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
322[ 0.934562] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
323[ 0.934733] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
324[ 0.934878] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
325[ 0.935058] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
326[ 0.935077] pci 0000:01:04.0: reg 0x10: [mem 0xf4000000-0xf7ffffff pref]
327[ 0.935087] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
328[ 0.935094] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
329[ 0.935132] pci 0000:01:04.0: supports D1 D2
330[ 0.935245] pci 0000:00:09.0: PCI bridge to [bus 01]
331[ 0.940225] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
332[ 0.940228] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
333[ 0.940231] pci 0000:00:09.0: bridge window [mem 0xf4000000-0xf7ffffff pref]
334[ 0.940355] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
335[ 0.940396] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
336[ 0.940431] pci 0000:02:00.0: reg 0x30: [mem 0x7be00000-0x7be0ffff pref]
337[ 0.940515] pci 0000:02:00.0: PME# supported from D3hot D3cold
338[ 0.940617] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
339[ 0.950618] pci 0000:00:0b.0: PCI bridge to [bus 02]
340[ 0.955576] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
341[ 0.955683] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
342[ 0.955721] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
343[ 0.955832] pci 0000:03:00.0: PME# supported from D3hot D3cold
344[ 0.955927] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
345[ 0.965925] pci 0000:00:0c.0: PCI bridge to [bus 03]
346[ 0.970894] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
347[ 0.970968] pci 0000:00:0d.0: PCI bridge to [bus 04]
348[ 0.976006] pci 0000:00:0e.0: PCI bridge to [bus 05]
349[ 0.981000] pci_bus 0000:00: on NUMA node 0
350[ 0.981102] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
351[ 0.987257] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
352[ 0.993428] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
353[ 1.000746] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
354[ 1.008042] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
355[ 1.015352] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
356[ 1.022658] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
357[ 1.028801] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
358[ 1.034946] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
359[ 1.042259] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
360[ 1.049570] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
361[ 1.056894] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
362[ 1.063040] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
363[ 1.069201] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
364[ 1.076499] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
365[ 1.083803] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
366[ 1.091095] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
367[ 1.099628] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
368[ 1.106099] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
369[ 1.112569] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
370[ 1.119046] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
371[ 1.125843] ACPI: Enabled 1 GPEs in block 00 to 1F
372[ 1.130967] vgaarb: setting as boot device: PCI:0000:01:04.0
373[ 1.136635] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
374[ 1.144731] vgaarb: loaded
375[ 1.147448] vgaarb: bridge control possible 0000:01:04.0
376[ 1.152926] PCI: Using ACPI for IRQ routing
377[ 1.157122] PCI: pci_cache_line_size set to 64 bytes
378[ 1.157179] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
379[ 1.157182] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
380[ 1.157515] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
381[ 1.164572] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
382[ 1.169633] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
383[ 1.178343] Switched to clocksource hpet
384[ 1.193813] pnp: PnP ACPI init
385[ 1.196937] ACPI: bus type PNP registered
386[ 1.201478] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
387[ 1.201563] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
388[ 1.201646] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
389[ 1.201743] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
390[ 1.201781] pnp 00:04: [dma 2]
391[ 1.201827] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
392[ 1.201849] pnp: PnP ACPI: found 5 devices
393[ 1.205959] ACPI: bus type PNP unregistered
394[ 1.217977] pci 0000:02:00.0: can't claim BAR 6 [mem 0x7be00000-0x7be0ffff pref]: no compatible bridge window
395[ 1.227932] pci 0000:00:09.0: PCI bridge to [bus 01]
396[ 1.232902] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
397[ 1.239002] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
398[ 1.245791] pci 0000:00:09.0: bridge window [mem 0xf4000000-0xf7ffffff pref]
399[ 1.253026] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
400[ 1.260252] pci 0000:00:0b.0: PCI bridge to [bus 02]
401[ 1.265226] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
402[ 1.272020] pci 0000:00:0c.0: PCI bridge to [bus 03]
403[ 1.276991] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
404[ 1.283784] pci 0000:00:0d.0: PCI bridge to [bus 04]
405[ 1.288760] pci 0000:00:0e.0: PCI bridge to [bus 05]
406[ 1.293732] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
407[ 1.293735] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
408[ 1.293738] pci_bus 0000:00: resource 6 [mem 0xf4000000-0xf7ffffff]
409[ 1.293740] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
410[ 1.293743] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
411[ 1.293746] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
412[ 1.293748] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
413[ 1.293751] pci_bus 0000:01: resource 2 [mem 0xf4000000-0xf7ffffff pref]
414[ 1.293754] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
415[ 1.293757] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
416[ 1.293900] NET: Registered protocol family 2
417[ 1.298796] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
418[ 1.306501] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
419[ 1.313850] TCP: Hash tables configured (established 65536 bind 65536)
420[ 1.320451] TCP: reno registered
421[ 1.323705] UDP hash table entries: 4096 (order: 5, 131072 bytes)
422[ 1.329913] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
423[ 1.336687] NET: Registered protocol family 1
424[ 1.341431] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
425[ 1.347516] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
426[ 1.353417] pci 0000:00:00.0: Found enabled HT MSI Mapping
427[ 1.358948] pci 0000:00:00.0: Found enabled HT MSI Mapping
428[ 1.364452] pci 0000:00:0b.0: Found disabled HT MSI Mapping
429[ 1.370036] pci 0000:00:00.0: Found enabled HT MSI Mapping
430[ 1.375566] pci 0000:00:00.0: Found enabled HT MSI Mapping
431[ 1.381071] pci 0000:00:0c.0: Found disabled HT MSI Mapping
432[ 1.386654] pci 0000:00:00.0: Found enabled HT MSI Mapping
433[ 1.392187] pci 0000:00:00.0: Found enabled HT MSI Mapping
434[ 1.397690] pci 0000:00:0d.0: Found disabled HT MSI Mapping
435[ 1.403276] pci 0000:00:00.0: Found enabled HT MSI Mapping
436[ 1.408835] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.414339] pci 0000:00:0e.0: Found disabled HT MSI Mapping
438[ 1.419909] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.425439] pci 0000:01:04.0: Video device with shadowed ROM
440[ 1.425448] PCI: CLS 64 bytes, default 64
441[ 1.425552] Unpacking initramfs...
442[ 1.658413] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
443[ 1.666264] PCI-DMA: Disabling AGP.
444[ 1.671366] PCI-DMA: aperture base @ f8000000 size 65536 KB
445[ 1.676952] init_memory_mapping: [mem 0xf8000000-0xfbffffff]
446[ 1.682614] [mem 0xf8000000-0xfbffffff] page 2M
447[ 1.682637] PCI-DMA: using GART IOMMU.
448[ 1.686408] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
449[ 1.698734] platform rtc_cmos: registered platform RTC device (no PNP device found)
450[ 1.706921] microcode: CPU0: patch_level=0x01000084
451[ 1.711814] microcode: CPU1: patch_level=0x01000084
452[ 1.716710] microcode: CPU2: patch_level=0x01000084
453[ 1.721613] microcode: CPU3: patch_level=0x01000084
454[ 1.726520] microcode: CPU4: patch_level=0x01000084
455[ 1.731417] microcode: CPU5: patch_level=0x01000084
456[ 1.736318] microcode: CPU6: patch_level=0x01000084
457[ 1.741214] microcode: CPU7: patch_level=0x01000084
458[ 1.746219] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
459[ 1.755017] LVT offset 1 assigned for vector 0x400
460[ 1.759826] IBS: LVT offset 1 assigned
461[ 1.763617] perf: AMD IBS detected (0x00000007)
462[ 1.768770] futex hash table entries: 2048 (order: 5, 131072 bytes)
463[ 1.775150] audit: initializing netlink subsys (disabled)
464[ 1.780580] audit: type=2000 audit(1448395683.516:1): initialized
465[ 1.787449] HugeTLB registered 2 MB page size, pre-allocated 0 pages
466[ 1.793848] zbud: loaded
467[ 1.796759] VFS: Disk quotas dquot_6.5.2
468[ 1.800726] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
469[ 1.807282] msgmni has been set to 10073
470[ 1.811758] alg: No test for stdrng (krng)
471[ 1.815918] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
472[ 1.823423] io scheduler noop registered
473[ 1.827363] io scheduler deadline registered
474[ 1.831716] io scheduler cfq registered (default)
475[ 1.836633] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
476[ 1.836758] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
477[ 1.836876] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
478[ 1.836997] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
479[ 1.837146] aer 0000:00:0b.0:pcie02: service driver aer loaded
480[ 1.837175] aer 0000:00:0c.0:pcie02: service driver aer loaded
481[ 1.837199] aer 0000:00:0d.0:pcie02: service driver aer loaded
482[ 1.837224] aer 0000:00:0e.0:pcie02: service driver aer loaded
483[ 1.837245] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
484[ 1.844216] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
485[ 1.850751] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
486[ 1.850762] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
487[ 1.857725] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
488[ 1.864257] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
489[ 1.864267] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
490[ 1.871232] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
491[ 1.871244] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
492[ 1.878206] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
493[ 1.878236] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
494[ 1.883843] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
495[ 1.890580] GHES: HEST is not enabled!
496[ 1.894464] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
497[ 1.921059] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
498[ 1.948728] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
499[ 1.956666] Linux agpgart interface v0.103
500[ 1.960976] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
501[ 1.971337] serio: i8042 KBD port at 0x60,0x64 irq 1
502[ 1.976326] serio: i8042 AUX port at 0x60,0x64 irq 12
503[ 1.981616] mousedev: PS/2 mouse device common for all mice
504[ 1.987288] rtc_cmos rtc_cmos: RTC can wake from S4
505[ 1.992397] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
506[ 1.998792] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
507[ 2.006661] ledtrig-cpu: registered to indicate activity on CPUs
508[ 2.012928] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
509[ 2.019381] AMD IOMMUv2 functionality not available on this system
510[ 2.025790] TCP: cubic registered
511[ 2.025929] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
512[ 2.037874] NET: Registered protocol family 10
513[ 2.042710] mip6: Mobile IPv6
514[ 2.045690] NET: Registered protocol family 17
515[ 2.050154] mpls_gso: MPLS GSO support
516[ 2.054741] registered taskstats version 1
517[ 2.059633] rtc_cmos rtc_cmos: setting system clock to 2015-11-24 20:08:04 UTC (1448395684)
518[ 2.068081] PM: Hibernation image not present or could not be loaded.
519[ 2.069880] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
520[ 2.077733] Write protecting the kernel read-only data: 8192k
521[ 2.086976] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
522[ 2.095581] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
523[ 2.119656] systemd-udevd[99]: starting version 215
524[ 2.125422] random: systemd-udevd urandom read with 3 bits of entropy available
525[ 2.155172] ACPI: bus type USB registered
526[ 2.159397] usbcore: registered new interface driver usbfs
527[ 2.164972] usbcore: registered new interface driver hub
528[ 2.170531] usbcore: registered new device driver usb
529[ 2.170571] pps_core: LinuxPPS API ver. 1 registered
530[ 2.170573] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
531[ 2.190393] PTP clock support registered
532[ 2.194643] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
533[ 2.201547] tg3.c:v3.137 (May 11, 2014)
534[ 2.205445] tg3 0000:02:00.0: enabling device (0004 -> 0006)
535[ 2.211275] ehci-pci: EHCI PCI platform driver
536[ 2.211374] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
537[ 2.221807] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
538[ 2.221872] ehci-pci 0000:00:02.1: EHCI Host Controller
539[ 2.221891] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
540[ 2.221909] ehci-pci 0000:00:02.1: debug port 1
541[ 2.221957] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
542[ 2.222002] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
543[ 2.234005] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
544[ 2.234071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
545[ 2.234073] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
546[ 2.234075] usb usb1: Product: EHCI Host Controller
547[ 2.234076] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
548[ 2.234077] usb usb1: SerialNumber: 0000:00:02.1
549[ 2.234385] hub 1-0:1.0: USB hub found
550[ 2.234396] hub 1-0:1.0: 10 ports detected
551[ 2.294686] ohci-pci: OHCI PCI platform driver
552[ 2.299444] ohci-pci 0000:00:02.0: OHCI PCI host controller
553[ 2.305085] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
554[ 2.312556] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
555[ 2.329184] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
556[ 2.339446] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
557[ 2.349179] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
558[ 2.357011] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
559[ 2.363811] tg3 0000:03:00.0: enabling device (0004 -> 0006)
560[ 2.369640] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
561[ 2.376000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
562[ 2.382796] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
563[ 2.390020] usb usb2: Product: OHCI PCI host controller
564[ 2.395253] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
565[ 2.401352] usb usb2: SerialNumber: 0000:00:02.0
566[ 2.406187] hub 2-0:1.0: USB hub found
567[ 2.409949] hub 2-0:1.0: 10 ports detected
568[ 2.450279] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
569[ 2.460537] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
570[ 2.470273] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
571[ 2.478104] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
572[ 2.492251] FS-Cache: Loaded
573[ 2.498692] RPC: Registered named UNIX socket transport module.
574[ 2.505314] RPC: Registered udp transport module.
575[ 2.511408] RPC: Registered tcp transport module.
576[ 2.517499] RPC: Registered tcp NFSv4.1 backchannel transport module.
577[ 2.530037] FS-Cache: Netfs 'nfs' registered for caching
578[ 2.548168] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
579[ 2.594020] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
580[ 2.697838] tsc: Refined TSC clocksource calibration: 1909.786 MHz
581[ 3.701595] Switched to clocksource tsc
582[ 4.208674] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
583[ 4.215209] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
584[ 4.222098] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
585[ 5.060107] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
586[ 5.074122] systemd[1]: Detected architecture 'x86-64'.
587[ 5.297514] systemd[1]: Inserted module 'autofs4'
588[ 5.303663] systemd[1]: Set hostname to <cb-test-tgt>.
589[ 5.396678] random: nonblocking pool is initialized
590[ 5.548019] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
591[ 5.560745] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
592[ 5.576137] systemd[1]: Expecting device dev-ttyS0.device...
593[ 5.588968] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
594[ 5.596740] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
595[ 5.604344] systemd[1]: Starting Remote File Systems (Pre).
596[ 5.620884] systemd[1]: Reached target Remote File Systems (Pre).
597[ 5.627012] systemd[1]: Starting Encrypted Volumes.
598[ 5.640860] systemd[1]: Reached target Encrypted Volumes.
599[ 5.646323] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
600[ 5.668852] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
601[ 5.678285] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
602[ 5.686342] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
603[ 5.694269] systemd[1]: Starting Paths.
604[ 5.708846] systemd[1]: Reached target Paths.
605[ 5.713241] systemd[1]: Starting Swap.
606[ 5.724846] systemd[1]: Reached target Swap.
607[ 5.729146] systemd[1]: Starting Root Slice.
608[ 5.740811] systemd[1]: Created slice Root Slice.
609[ 5.745536] systemd[1]: Starting User and Session Slice.
610[ 5.760904] systemd[1]: Created slice User and Session Slice.
611[ 5.766720] systemd[1]: Starting Delayed Shutdown Socket.
612[ 5.780806] systemd[1]: Listening on Delayed Shutdown Socket.
613[ 5.786583] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
614[ 5.804798] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
615[ 5.811781] systemd[1]: Starting Journal Socket (/dev/log).
616[ 5.828794] systemd[1]: Listening on Journal Socket (/dev/log).
617[ 5.834763] systemd[1]: Starting udev Kernel Socket.
618[ 5.848872] systemd[1]: Listening on udev Kernel Socket.
619[ 5.854275] systemd[1]: Starting udev Control Socket.
620[ 5.868775] systemd[1]: Listening on udev Control Socket.
621[ 5.874225] systemd[1]: Starting Journal Socket.
622[ 5.888756] systemd[1]: Listening on Journal Socket.
623[ 5.893774] systemd[1]: Starting System Slice.
624[ 5.908758] systemd[1]: Created slice System Slice.
625[ 5.913668] systemd[1]: Starting system-getty.slice.
626[ 5.928743] systemd[1]: Created slice system-getty.slice.
627[ 5.934159] systemd[1]: Starting system-serial\x2dgetty.slice.
628[ 5.948759] systemd[1]: Created slice system-serial\x2dgetty.slice.
629[ 5.955087] systemd[1]: Starting Increase datagram queue length...
630[ 5.974326] systemd[1]: Starting udev Coldplug all Devices...
631[ 6.020876] systemd[1]: Starting Load Kernel Modules...
632[ 6.207418] systemd[1]: Started Set Up Additional Binary Formats.
633[ 6.213760] systemd[1]: Mounting Debug File System...
634[ 6.230553] systemd[1]: Starting Create list of required static device nodes for the current kernel...
635[ 6.254750] systemd[1]: Mounting POSIX Message Queue File System...
636[ 6.274388] systemd[1]: Mounting Huge Pages File System...
637[ 6.289964] systemd[1]: Starting Slices.
638[ 6.304714] systemd[1]: Reached target Slices.
639[ 6.309261] systemd[1]: Starting Remount Root and Kernel File Systems...
640[ 6.336695] systemd[1]: Mounted Huge Pages File System.
641[ 6.352694] systemd[1]: Mounted POSIX Message Queue File System.
642[ 6.368607] systemd[1]: Mounted Debug File System.
643[ 6.384639] systemd[1]: Started Increase datagram queue length.
644[ 6.400703] systemd[1]: Started Load Kernel Modules.
645[ 6.420663] systemd[1]: Started Create list of required static device nodes for the current kernel.
646[ 6.444648] systemd[1]: Started Remount Root and Kernel File Systems.
647[ 6.460631] systemd[1]: Started udev Coldplug all Devices.
648[ 6.506957] systemd[1]: Started Various fixups to make systemd work better on Debian.
649[ 6.514848] systemd[1]: Starting Load/Save Random Seed...
650[ 6.530286] systemd[1]: Starting Create Static Device Nodes in /dev...
651[ 6.550080] systemd[1]: Starting Apply Kernel Variables...
652[ 6.566263] systemd[1]: Mounted Configuration File System.
653[ 6.571871] systemd[1]: Mounted FUSE Control File System.
654[ 6.577384] systemd[1]: Starting Syslog Socket.
655[ 6.592618] systemd[1]: Listening on Syslog Socket.
656[ 6.597689] systemd[1]: Starting Sockets.
657[ 6.612567] systemd[1]: Reached target Sockets.
658[ 6.617205] systemd[1]: Starting Journal Service...
659[ 6.644581] systemd[1]: Started Journal Service.
660[ 6.781190] systemd-udevd[189]: starting version 215
661[ 7.049208] systemd-journald[188]: Received request to flush runtime journal from PID 1
662[ 7.504448] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
663[ 7.511531] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
664[ 7.519463] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
665[ 7.519654] EDAC MC: Ver: 3.0.0
666[ 7.541815] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
667[ 7.550211] ACPI: Power Button [PWRB]
668[ 7.554189] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
669[ 7.561640] ACPI: Power Button [PWRF]
670[ 7.616305] MCE: In-kernel MCE decoding enabled.
671[ 7.632128] FDC 0 is a post-1991 82077
672[ 7.652593] SCSI subsystem initialized
673[ 7.656950] acpi-cpufreq: overriding BIOS provided _PSD data
674[ 7.663798] AMD64 EDAC driver v3.4.0
675[ 7.667768] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
676[ 7.672985] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
677[ 7.678693] EDAC amd64: DRAM ECC enabled.
678[ 7.682938] EDAC amd64: F10h detected (node 0).
679[ 7.687667] EDAC MC: DCT0 chip selects:
680[ 7.687671] EDAC amd64: MC: 0: 0MB 1: 0MB
681[ 7.692389] EDAC amd64: MC: 2: 0MB 3: 0MB
682[ 7.697325] EDAC amd64: MC: 4: 0MB 5: 0MB
683[ 7.702082] EDAC amd64: MC: 6: 1024MB 7: 1024MB
684[ 7.706808] EDAC MC: DCT1 chip selects:
685[ 7.706811] EDAC amd64: MC: 0: 0MB 1: 0MB
686[ 7.711623] EDAC amd64: MC: 2: 0MB 3: 0MB
687[ 7.716376] EDAC amd64: MC: 4: 0MB 5: 0MB
688[ 7.721093] EDAC amd64: MC: 6: 1024MB 7: 1024MB
689[ 7.725891] EDAC amd64: using x4 syndromes.
690[ 7.730088] EDAC amd64: MCT channel count: 2
691[ 7.734770] EDAC amd64: CS6: Registered DDR2 RAM
692[ 7.739579] EDAC amd64: CS7: Registered DDR2 RAM
693[ 7.740014] input: PC Speaker as /devices/platform/pcspkr/input/input4
694[ 7.751613] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
695[ 7.761512] EDAC amd64: DRAM ECC enabled.
696[ 7.765805] EDAC amd64: F10h detected (node 1).
697[ 7.766680] libata version 3.00 loaded.
698[ 7.770495] EDAC MC: DCT0 chip selects:
699[ 7.770498] EDAC amd64: MC: 0: 1024MB 1: 0MB
700[ 7.775230] EDAC amd64: MC: 2: 0MB 3: 0MB
701[ 7.779943] EDAC amd64: MC: 4: 0MB 5: 0MB
702[ 7.784651] EDAC amd64: MC: 6: 0MB 7: 0MB
703[ 7.789368] EDAC MC: DCT1 chip selects:
704[ 7.789370] EDAC amd64: MC: 0: 0MB 1: 0MB
705[ 7.794073] EDAC amd64: MC: 2: 0MB 3: 0MB
706[ 7.798809] EDAC amd64: MC: 4: 0MB 5: 0MB
707[ 7.803547] EDAC amd64: MC: 6: 0MB 7: 0MB
708[ 7.808289] EDAC amd64: using x4 syndromes.
709[ 7.812507] EDAC amd64: MCT channel count: 1
710[ 7.816868] EDAC amd64: CS0: Registered DDR2 RAM
711[ 7.822191] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
712[ 7.832179] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
713[ 7.843017] pata_amd 0000:00:06.0: version 0.4.1
714[ 7.844549] scsi0 : pata_amd
715[ 7.847730] scsi1 : pata_amd
716[ 7.850744] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
717[ 7.857760] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
718[ 7.865069] sata_nv 0000:00:07.0: version 3.5
719[ 7.865429] kvm: Nested Virtualization enabled
720[ 7.865562] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
721[ 7.866472] scsi2 : sata_nv
722[ 7.866744] scsi3 : sata_nv
723[ 7.866861] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
724[ 7.866864] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
725[ 7.867234] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
726[ 7.867920] scsi4 : sata_nv
727[ 7.869501] scsi5 : sata_nv
728[ 7.869575] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
729[ 7.869578] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
730[ 7.924530] kvm: Nested Paging enabled
731[ 8.175965] ata3: SATA link down (SStatus 0 SControl 300)
732[ 8.179951] ata5: SATA link down (SStatus 0 SControl 300)
733[ 8.503858] ata4: SATA link down (SStatus 0 SControl 300)
734[ 8.819747] ata6: SATA link down (SStatus 0 SControl 300)
735[ 38.691783] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****